Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.4 LAccepted-Finance | ₹48.4 L | L1 | Accepted-Finance ACCEPTED DUE TO LOWEST RATE QUOTED |
| 2 | L2₹48.5 LRejected-Finance | ₹48.5 L | L2 | Rejected-Finance REJECTED DUE TO HIGHER RATE QUOTED |
Updated dates
Tender Value
₹49.4 L
EMD Value
₹4.5 L
Closing Date
14 Mar 2026, 12:00 pmClosed
Superintending Engineer
Office of the Superintending Engineer, Bahraich-Shrawasti Circle, P.W.D., Bahraich
Renewal of NH-927 Km.-50 to Dhansari Km.-1 Via Budhanpur, Kodari Newajis Ali, Harchanda Uttari and Harchanda Link Road Km.-6(920), 7(480), 8(800), 9, 10 and 11(280) in Financial Year 2026-27
2026_CEDPW_1116245_1
534/8 Kam/e_Tendering/BRH-SWT Circle/2025-26 Dated - 06-02-2026
Open Tender
Civil Works - Roads
90 days
Bahraich
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,715
₹4.5 L
Yes
Bahraich
18 Mar 2026
16 Feb 2026
14 Mar 2026
16 Feb 2026
14 Mar 2026
16 Feb 2026
18 Feb 2026
Providing, laying, spreading and compacting stone aggregates of 22.4-53mm gauge sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.
Providing and applying tack coat with bitumen (VG-10) using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.
Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using Viscocity grade bitumen (VG-10) to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hot mix plant of appropriate capacity not less than 200 tonnes/hour, laying and rolling with a smooth wheeled roller, finished to required level and grades.
Providing and laying of premix sand seal coat with HMP of appropriate capacity not less than 200 tonnes/ hours using crushed stone chipping 6.7 mm size and penetration bitumen of suitable grade(VG-10).using Type A Seal Coats
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2
The Above Rates Are Exclusive of GST
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.06 MB
T_2.pdf
Tender Documents • 0.48 MB
BOQ_2072417.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid