Up-gradation of Deck Slab and Allied works of 3x40 Mtr Span Kunan Bridge.

installation of Railing providing and Installation of railling with ISMB 100 post of 1.35mtre in height @1900mmc/c and G.I Pipe of 50mm dai of light duty in 4 rows including bolts,nuts welding, cutting, primary coat and a two coats painting (yellow and black). including cost and carriages of all the materials involved upto site of work, all complete job. As per engineer in charge.

Paint work Providing and laying in position cement concrete 1:1.5:3 grade (1 cement : 1.5coarse sand : 3 graded stone aggregate 20mm nominal size) of specified grade excluding the cost of centring and shuttering

Providing and laying in position cement concrete 1:3:6 grade (1 cement : 3coarse sand : 6graded stone aggregate 20mm nominal size) of specified grade excluding the cost of centring and shuttering abutmet

Centering shuttering incl. starightening and removal of form work abuttment ,pier.post and struct.

Centering shuttering incl. starightening and removal of form work abuttment ,pier.post and struct.

Reinforcement Incl Bending cutting and barbinding incl. all complete job.

applying prime coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel coat work(second coat)

painting steel work with epoxy/multi multi surface paint of required shade to give even shade. Two or more coats applied @0.90litre/10sqm over an under coat of primer applied @0.80 litre/10sqm of approved brand and manufacture.(Black and white)

construction of foundation stone/inauguration stone/plague with pcc bed at standarad height and size with name stone with curved letters complete job,as per enginner in charge.

Macadamization of Deck slab Providing and applying tack coat using hot straight run bitumen of grade – VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as On W.B.M. @ 0.75 Kg/sqm

Providing & laying of 50 mm thick compacted Bituminous Macadam in accordance with IRC/ CPWD/ MOST specification adopting aggregate Grading-1st with binder content not less than 3.5% (66 Kgs/ Cum) incl all transporting laying rolling and Qualty Control

Providing & laying of 25mm thick semidense with bitumen of 60/70 grade @5% by weight of total mix. and laying the mixed material with sensor paver finisher fitted with electronic sensing device to the required level and grade and rolling with road rollers as per MORTH specifications to achieve the desired density and compaction.

Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete.

Providing and applying 2.5mm thick road marking strips (retro-reflective)of specified shade/colour usinghot thermoplastic material by fully/semiautomaticthermoplastic paint applicator machine fitted with profile shoe,glass beads dispenser, propane tank heater and profile shoe heater, drivenby experienced operator on road surface including cost of material, labour,T&P, cleaning the road surface of all dirt, seals, oil, grease and foreignmaterial etc. complete as per direction of Engineer-in-charge and accordance with applicablespecifications.painting road surface marking adquate no of coats on bitumous surface two or more coats complete jo

Crate work Earth work in excavation by mechanical means in foundation trenches, drains, pipes and cables etc.(not exceeding 1.5 Mtr. In width or 10 SqMts on plan) including dressing of sides and ramming of bottoms, lift upt 1.5 Mtr. Including getting out excavated soil and disposal of surplus soil as directed and lead up to 50 Mtrs

Providing & making Gabion structure with Mechanically Woven DoubleTwisted Hexagonal Shaped Wire mesh Gabion Boxes as per IS16014:2012,MORTH Clause 2500, of required size, Mesh Type 10x12(D=100 mm with tolerance of ± 2%) Zinc coated, Mesh wire diameter3.0mm, mechanically edged/selvedged with partitions at every 1m intervaland shall have minimum 10 numbers of openings per meter of meshperpendicular to twist, tying with lacing wire of diameter 2.2mm, supplied@ 3% by weight of Gabion boxes, filled with boulders with least dimension of 200 mm, as per drawing, all complete as per direction ofEngineer-in-charge.

Providing and laying of boulders/ stone soling behind the C/ wall incl all carriage complete job