Spl repair of internal electrification of OR md accn septic tank connected drains changing and laying new pipe lines for family accn in various block and repair maint OR md accn at No 2 Wksp AR E Silchar

SCHEDULE ‘A’ PART-I (Special repair of internal electrification of or md accn at No 2 Wksp AR, Silchar)

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Supply and fixing bulk head light fitting on existing brick wall for outer light.

M&L for point wiring in existing conduit (surface/concealed) with PVC insulated, unsheathed, single core multistandard copper conductor cable (FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through existing PVC conduit and fixed in existing sunk boxes and covered with new 3.0mm thick ISI marked laminated sheet cover and brass screw with cup washers for switches/sockets/ regulators etc.

Supplying and drawing 2X4 Sqmm FRLS PVC insulatedcopper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required (15 Amp Socket).

Supplying and drawing 2X6 Sqmm sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

Supply and fixing 32 mm Medium class PVC Casing capping with accessories in surface as required.

Supplying and fixing piano type switch 06 Amp on the existing switch box/ cover including connections etc as required.

Supplying and fixing piano type switch 16 Amp on the existing switch box/ cover including connections etc as required.

Supplying and fixing brass batten/ angle holder.

Supplying and fixing ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying and fixing 6 Pin 15/16 Amp socket on the existing switch box/ cover including connections etc. as required.

Supplying and fixing 3 pin 5/6 amp socket outlet. One three pin switch socket 5 amps outlet on same board.

Supplying and fixing stepped type electronic fan regulator on the existing switch box including connections as required.

Supply and fix LED batten 20/22 watt, 4 feet long suitable for indoor applications with integrated electronic driver of operating voltage 110 to 270 Volts , Lumin output not less than 1800 lm including connecting up and taking down existing unserviceable surface/ ceiling mounted 28/36 watt FTL fitting complete all as specified and as diretcted.

M&L for refixing of tube lights on exisiting wall/roof after necessary rewiring complete all as specified and as diretcted.

Supplying and fixing , single pole and neutral, sheet steel, MCB distribution board, 12 way 240 V, Double dor on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthling etc. as required. (But without MCB/RCCB/Isolator).

Supplying and fixing MCB SP 6 A to 32 A rating, 240 V, 10 kA ,in the existing MCB DB complete with connections,testing and commissioning etc.

Supplying and fixing MCB DP 63 Amps, 240 V, in the existing MCB DB complete with connections, testing and commissioning etc.

S&F Switch fuse unit 100 amps. SPN, 230 Volts complete all as specified and as directed.

S&F Copper bus bar in sheet metal enclosure of capacity 200 Amps ,415 Volts complete all as specified and as directed.

S&Fon load changeover switch 100 Amps,415 Volts in sheet metal enclosure complete all as specified and as directed.

SCHEDULE ‘A’ PART-II (Special repair of spetic tank and connected drains for family accn in various blocks of bldg No P/47, P/48, P/49 & P/55 changing and laying new pipe lines Bk No P/47 to P/49 & P/55 at No 2 Wksp AR, Silchar)

DRAIN WORK Earth work in excavation by mechanical means (Hydraulic excavator)/manualmeans over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including getting out and disposal of excavated earth leadupto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level.1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand)

12 mm cement plaster of mix 1:4 CM

Centering and shuttering including strutting, propping etc. and removalof form forFoundations, footings, bases of columns, etc. for mass concrete

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone

BRICK MASONRY CHAMBER Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge..

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level.1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand)

12 mm cement plaster of mix 1:4 CM

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone

R.C.C. pipes NP2 class 150 mm diametre

R.C.C. pipes NP2 class 250 mm diametre

SEPTIC TANK Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.2.8.1 All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of cantering and shuttering - All work up to plinth level : (1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

12 mm cement plaster of mix: 1:4 (1 cement: 4 fine sand) incl neat cement finish.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.5.22.1 Mild steel and Medium Tensile steel bars kilogram

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

SCHEDULE ‘A’ PART-III (Special repair/maint of OR md accn bldg No P/17, 35, 38, 48, 49, 55, 43, 58, 62, 65, 75, 78, 87 at No 2 Wksp AR, Silchar)

SCHEDULE A PART - I (BUILDING WORK) Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20mm nominal size)

Providing and laying in situ seven course water proofing treatmentwith APP (Atactic poly-propylene) modified Polymeric memberaneover roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm,which shall consist of blown type bitumen of grade 85/25 conformingto IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm weight consistingof five layers prefabricated with centre core as 20 micron HMHDPEfilm sandwiched on both sides with polymeric mix and the polymericmix is protected on both side with 20 micron HMHDPE film. 7th, thetop most layer shall be finished with brick tiles of class designation10 grouted with cement mortar 1:3 (1cement : 3 fine sand) mixedwith 2% integral water proofing compound by weight of cement overa 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately).

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 15.23.1 for thickness of tiles 10 mm to 25 mm. as per direction of Engineer in charge.

Cement concrete pavement with 1:2:4 (1 cement: 2 coarse sand: 4graded stone aggregate 20 mm nominal size), including finishing complete. as per direction of Engineer in charge.

Supply and mixing Dr. Fixit water proofing Compound (1 Kg pkt) in cement conceit and plastering as per direction of Engineer - in - charge.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be pacified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4Coarse sand), including pointing the joints with white cement and matching pigment etc. as per direction of Engineer in charge.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light trafficparking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour &pattern over 50mm thick compacted bed of sand, compacting andproper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator,filling the joints with sand and cutting of paver blocks as per requiredsize and pattern, finishing and sweeping extra sand. complete all asper direction of Engineer-in-Charge.16.91.1 60mm thick cement concrete paver block of M-35 gradewith approved colour, design & pattern.

Excavating, supplying and filling of local earth (including royalty) by mechanical transport up to a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

Supplying and stacking at site. 63 mm to 45 mm size stone aggregate.

Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and booming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density.

Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand)

12 mm cement plaster of mix 1:4 CM

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand)

Excavating, supplying and filling of local earth (including royalty) by mechanical transport up to a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

Supplying and stacking at site. 63 mm to 45 mm size stone aggregate.

Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and booming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density .

Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing

12 mm cement plaster of mix 1:4 CM

Precast terrazo tiles 22 mm thick with graded marble chips of size upto 12 mm, in skirting and risers of steps not exceeding 30 cm in height, on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of : 11.18.1 Light shade pigment using white cement

Removing dry or oil bounded distemper water proofing paint and like by scrapping with sand papering and preparing surface smooth including necessary repairs to the scratches etc. Complete.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre, of approvedmanufacturer, of required shade and colour complete, as per manufacturer’s specification. Two or more coats on new or old work

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, and holdfasts etc. complete and stacking within 50 metres lead: as per direction of Engineer in charge.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows(Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick Kiln seasoned and chemically treated hillock wood.

Providing & fixing fly proof wire gauze to windows, clerestory windows &doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Kiln seasoned and chemically treated hillock wood

Renewing glass panes, with putty and nails wherever necessaryincluding racking out the old putty:Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 250x10 mm each. as per direction of Engineer in charge.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 100 mm dia.as per direction of Engineer in charge.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: 13.48.1 two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @0.75 ltr / 10 sqm as per direction of Engineer in charge.

VIKASH STEEL INDUSTRIES