Repair to leakage/seepage, joinery, flooring, ceiling, sanitary fittings, plastering, painting, approach path, drain of New MH under GE Dehradun

Amount

Taking down chowkats of any description exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame).

S&F in repair powder coated aluminium anodised door with frame and shutter, and glazing 5.0 mm thick tinted glass and 12 mm thick prelaminated particle board exerior grade in bottom panel, rubber gasket, aluminium glazing clips, mortice lock, aluminium stopper cleat, iron mongary, section of aluminium door, including taking down existing door shall be of following sizes: - Top :- 85x44.5x1.20 mm thick fixed with rawal plug width;- 85x44.5x1.20 mm thick Bottom;- 1212x44.5x1.20 mm thick Style;- 85x44.5x1.20 mm thick Glazing beading;- 0.70 mm thick Cast aluminium handle faccy type :- 150mm Aluminium tower bold 9.9 mm dia shoot 200 mm long Brass mortice lock- 100 mm 4 lever Aluminium stopper cleat Aluminium hinges 100 mm long Note:- (i) Making good of wall surface with matching to existing surface complete all as specified ad directed (ii) PCC shall be measured and paid seperatelly

S&F factory made solid fibre reinforcement plastic (FRP) frame of size 75mm x 50 mm the rasin of chemical used in door of unsaturated polyester rasin category, catalyst used of methyl Ethyl Ketone peroxide (MEKP)/benzyl peroxide/acetyl aceto peroxide. Accelerator used of cobalt napthalate/cobalt octonate/N/N Dinethyl aniline. Timber suitable for manufacturing of FRP products as in accordance with IS 12896. The timber used for frames is seasoned upto the permissible moisture content as per IS-287 : 1993. Pigment compatible with unsaturated polyester resin is used to obtain the shade of finish complete all as specified and directed by the Engineer-in-charge.

S&F factory made solid panel fibre reinforcement plastic (FRP) door shutter 30 mm thick consisting of frame top & bottom rails as per SSR Part I, any number of panels, the rasin of chemical used in door of unsaturated polyester rasin category, catalylst used of methyl Ethyl Ketone peroxide (MEKP)/benzyl peroxide/acetyl aceto peroxide. Accelerator used of cobalt napthalate/cobalt octonate/N.N Dinethyl aniline Timber suitable for manufacturing of FRP products is in accordance with IS12896. The timber used for frames is seasoned upto the permissible moisture content as per IS-287:1993. Pigment compatible with unsaturated polyester rasin is ued to obtain the shade of finish complete all as specified and directed by the Engr-in-Charge both side

S&F 18 to 20 mm thick solid PVC board for cupboard shutters with one side 1 mm thick printed PVC sheet other side plain PVC sheet including suitable PVC frame complete all as specified and directed.

Taking down Chowkats or frames of any description not exceeding 1.5 Sqm each (Without taking off shutters from the frame)

S&F in repairs powder coated aluminium window double shutter with frame and glazing, wire gauge, rubber gasket, aluminium glazing clips, aluminium peg stay, iron mongary etc. complete all as specified and directed. Aluminium sections, including taking down existing window. shall be as given below : - Frame:- 85x44.5x1.20 mm thick fixed with rawal plug Style:- 44.5x44.5x1.20 mm thick Glazing beading:- 0.70 mm thick Aluminium handle 'D' type :- 100mm Aluminium tower bold 9.9 mm dia shoot 150 mm long Glass:- 5 mm thick frosted/ plain glass as directed. Wire mesh: Stainless steel of 0.063 mm nominal dia wire and average width of arperture 1.40 mm Aluminium stopper cleats Aluminium hinges 100 mm long powder coated

Taking down door shutter of any description exc. 2 sqm each complete .

M&L for 30 mm thick, factory made flush shutters, solid core construction, with block board core and plywood face, pannels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed.

M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down Aluminium window shutter size n.exc 1 Sqm including opening up of the corner junctions and replacement of defective members (matching with existing material) alongwith necessary cleats, butt hinges and refixing in the same opening to make the window functional complete all a specified and directed. (Note :- Butt hinges and anodised aluminium section shall be measured and paid seperately)

Taking down Aluminium door shutter size exc 1 Sqm but n.exc 2 Sqm including opening up of the corner junctions and replacement of defective members (matching with existing material) alongwith necessary cleats, pivots, locks and refixing in the same opening to make the door functional complete all as specified and directed. (Note : - Butt hinge ,Pivot, locks and anodised aluminium section shall be measured and paid seperately)

Taking down Aluminium door shutter size exc 2 Sqm including opening up of the corner junctions and replacement of defective members (matching with existing material) alongwith necessary cleats, pivots and refixing in the same opening to make the door functional complete all as specified and directed. (Note : - Butt hinge, Pivot, Floor spring and anodised aluminium section shall be measured and paid seperately)

Hacking out old broken glass (any thickness), size quality or description from wooden frames glazed with putty or fixed with beads .complete all as specified and directed

S&F 5mm thick plain glass in any size or shape in door, window, partitions etc. all as specified and directed by Engr-in-charge

S&F12mm thick toughened glass in any size or shape in door, window, partitions etc. all as specified and directed by Engr-in-charge

S&F 5.00 mm thick float glass in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket and aluminium snap beading etc. complete all as direted by engineer-in-charge . (Note : - Cost of aluminium snap beading and EPDM rubber/ neoprene gasket shall be paid and measured seperately)

Supply only anodised aluminium snap beading.

Supply only EPDM rubber/ neoprene gasket.

S & F in repair powder coated aluminium grill of size 75x75x4-5 mm thick size fixed with aluminium frame including taking down old grill complete all as specified and directed

S&F in repair Double action floor spring of approved brand and manufacture conforming to IS: 6315 hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and making good to floor to match with existing floor complete all as specified and directed by engr-in charge.

Dismantling wrought iron work of any description as specified and directed.

M&L Framed work as in door or gate angle or other section prepared for hanging and sliding with and including hooks and hinges and steel gate doors fittings Fe-410-W. E-250 quality 'B' complete all as specified and directed

M&L for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer. complete all as specified and directed

S&F in repair of steel window with side hung shutters including box type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F in repair of steel window with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

Taking down existing projected type hings from the steel window carefully with disturbing frame and fix 50 mm long mild steel box type hinge weld to steel frame and shutter with welding and making good including touch with paint and with existing surfaces including scaffolding all as directed by Engr-in-charge.

S&F in repair of steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

S&F in repairs powder coated aluminium anodised partition with frame, (fixed type) and glazing 4.8 mm thick retro reflective glass, 12mm thick prelaminated particle board interior grade in bottom panell, glass fixed with rubber gasket with aluminium glazing beads and rubber gasket etc of following sizes complete all as specified and directed by the Engr-in-charge. Frame of stiles and top section:- 44.5x44.5x1.22 mm thick Bottom section:-112x44.5x1.22 mm thick

S&F in repair aluminium (extruded section) Door closer hydraulically regulated, designation No.1 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed with stainless steel screw complete all as specified and directed.

S&F in repair auto closing hinges 35 mm of 0 crank ( KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters Make :Hexa, Shreeji, Hafele

S&F in repair ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs, Make :Hexa, Shreeji, Hafele

S&F in repair stainless steel handles 100 mm size for kitchen cabinet shutters Make :Hexa, Shreeji, Hafele

S&F in repair chrome plated stainless steel wire basket (storage basket) pull out type for large utensils, size 795 x 500 x 150 mm with necessary fixing clips etc. complete in all respect as specified and as directed by engineer- in – charge.Make :Hettich, Hafele, Butterfly

S&F in repair chrome plated stainless steel wire basket (cup and saucer basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etc. complete in all respect as specified and as directed by Engineer- in – Charge. Make :Hettich, Hafele, Butterfly

S&F in repair chrome plated stainless steel wire basket (plate basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etc. complete in all respect as specified and as directed by Engineer- in – Charge .Make :Hettich, Hafele, Butterfly

S&F in repair chrome plated stainless steel wire basket (Thali basket) pull out type, size 530 x 500 x 200 mm with necessary fixing clips etc. complete in all respect as specified and as directed by engineer- in – charge.

S&F in repair chrome plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 x 100 mm with necessary fixing clips etc. complete in all respect as specified and as directed by engineer- in – charge. Make : Hettich, Hafele, Butterfly

S&F in repair chrome plated stainless steel wire basket (Grain Trolley) pull out type, size 380 x 500 x 200 mm with necessary sliding frame structure, fixing clips etc. complete in all respect as specified and as directed by engineer- in - charge. Make : Hettich, Hafele, Butterfly

S&F in repair chrome plated stainless steel wire basket (storage basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etc. complete in all respect as specified and as directed by engineer- in – charge. Make : Hettich, Hafele, Butterfly

S&F in repair chrome plated stainless steel wire basket (Bottle pull out) pull out type, size 120 x 500 x 432 mm with necessary sliding frame structure, fixing clips etc. complete in all respect as specified and as directed by engineer- in – charge.” Make : Hettich, Hafele, Butterfly

S&F in repair continious (Piano) hinges, mild steel, bright finish or electrogalvanised. 30 mm width of flaps (when open) complete all as specified as directed.

S & F repair Hasp and staple 100mm safety type, stainless steel 304 grade with hinge pin including bolt to hinge plate and fixed with screws

S&F 100 mm size stainless steel butt hinges and fixed with stainless steel screws, complete all as specified and directed by Engr-in-Charge.

S&F 200 mm long, solid in one piece stainless steel barrel tower bolts of extruded section 10mm dia shoot complete all as specified and directed by Engr-in-charge.

S&F 150 mm long, solid in one piece stainless steel barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm size solid in one piece stainless steel handles,cast D type,anodised all in 204 grade and fixed in stainless steel screwsall as directed complete all as specified and directed by Engr-in-Charge.

S&F 125mm size solid in one piece stainless steel handles,cast D type, 204 grade and fixed in stainless steel screws all as directed complete all as specified and directed by Engr-in-Charge.

S&F magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F stainless steel sliding door bolts 204 grade, hasp and staple type with bright bolt not less than 16mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 250mm long complete all as specified and directed.

S&F floor door stopper of stainless steel double legged and tongue, 204 grade, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm. complete all as specified and directed.

S & F 300 mm mild steel, ordinary rat tail rod pattern spring welded to steel/fixed to wooden door frame including roller and roller plate complete.

S&F in repair 1mm wall thickness stainless steel 202 Gde drapery rod with incl brackets, decorative finals at both ends & curtain rings 8 Nos (Minimum) complete. (Note : Sample/ design approved by Engineer-in-charge)

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing.

Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Demolition of cement concrete ground floor and paving n.exc 15cm thick below or above ground level complete all as specified and directed

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises.

M&L 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone agg) for sub base to receive the screed all as specified

M&L cement concrete 1:3:6 type C-2 (using 40mm graded aggregate) 75 mm thick as in plinth protection surface finished even and smooth without using extra cement complete all as specified and directed

M&L screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified and directed

M&L Glazed ceramic tiles coloured size of size 200 x 300 x 6 to 7mm , as on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white cement to match on and including 15 mm thick rendering in CM 1:4 for receiving tiles as in backing complete all as specified and directed

M & L for Glazed ceramic coloured tiles of size 450mm X 350mm X 7 mm thick as on vertical surfaces such as skirting, dados and rises to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile on and including 15 mm thick rendering in CM 1:4 for receiving tiles as in backing complete all as specified and directed

M&L non skid ceramic coloured tiles (300x 300mm) x 7 to 8mm thick as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile on and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified and directed

M & L for Non skid ceramic coloured tiles (square / rectangular) of 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exc. 0.18sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile on and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified and directed

M & L for Vitrified Ceramic tiles light shade polished (square / rectangular) of 10mm thick, area of each tile n.exc exceeding 0.36 sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile on and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified and directed

M & L for heavy duty Vitrified tiles light shade polished (square / rectangular) of 10mm thick, area of each tile n.exc exceeding 0.36 sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile onscreed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6. and including dismantling of tiles complete and removing debries outside the premises as directed by Engr in charge..

M&L for red brick tiles (clay tiles) of 10-12 mm thick size 15 x 5 to 7.5 cm as in vertical surfaces such as wall dado's etc over and including 15 mm thick rendering CM (1:4) set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces of tile complete all as specified and directed. The work will be carried upto tripple storey building the rate of scaffolding included for this item also and including dismantling of tiles complete and removing debries outside the premises as directed by Engr in charge

M & L for coloured prepolished rubber moulded chequred cement concrete tile 30 cm x 30 cm x 20 to 22 mm thick with 3 mm spacer bar, set, jointed and pointed in neat cement slurry as in floor with grey cement and filling joints with colour pigment over and including 20 mm thick screed bed in cement mortar 1:6 including dismantling of old tiles complete.complete all as specified and directed Make : NTC

Demolition of stone slabs and tiles of any description or thickness in floors, aprons walls etc complete all as specified and as directed by the Engr-in-Charge.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for 60 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and no pigment complete all as specified and as directed by the Engr-in-Charge.

M & L for 20 - 25 mm thick machine cut Kota stone slab as in flooring etc over nd including 20 mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed.

M & L for 20 - 25 mm thick machine cut Kota stone slab as in risers of steps, skirting, dado and pillar over and including 15 mm thick rendering in CM 1:4 , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed.

M&L 20 mm thick granite ( of any type) tiles machine cut in skerting/dado including 15mm thick rendering in CM (1:4) over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

Demolition of reinforced cement concrete in any position and any description including cutting of reinforcement bars to facilitate demolition complete all as specified and directed.

M & L for use and waste of formwork to soffits of RCC Shelves and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.

M & L for use and waste of formwork to edges of RCC Shelves or similar work thickness exc. 05 cm and not exc. 10 cm in rough finished surfaces of concrete complete all as specified and directed.

M&L RCC 1:2:4 type B-1 (using 20 mm graded stone agg) as in slab and shelves supported on walls complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc.complete all as specified and directed.

M&L brick work with sub class ‘B’ bricks straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) complete all as specified and directed.

M&L brick work with sub class ’B’ bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.

Taking down of cement or cement lime plaster any description from brick or stone wall , ceiling etc. including raking out of joints, hacking for key, scrubbing down with water etc.complete all as specified and directed.

Removing /cutting trees vegetation, digging out roots filling holes 0n building wall/roof/cajja etc and make in good with cement mortar 1:2:4 complete.

M & L rendering 15mm thick in patches n exc 3 Sqm in cement mortar 1:4 mixed with water proofing compound of cement finished fair faces of brick/concrete surfaces of wall, even and fair without using extra cement . WPC will be measured and paid separately.

M&L rendering 15 mm thick cement plaster in CM 1:6 on brick & concrete surfaces and finished even and smooth (without using extra cement) all as specified and directed. rendering will be done in two layers complete. (rendering will be done in two layers complete.1st layer will be 10-12 mm thick and 2nd layer will be 3-5 mm thick.)

M & L rendering 15mm thick in cement mortar 1:4 mixed with water proofing compound @ 3% by wt of cement finished fair faces of brick/concrete surfaces even and fair without using extra cement . WPC will be measured and paid separately. (rendering will be done in two layers complete.1st layer will be 10-12 mm thick and 2nd layer will be 3-5 mm thick.)

M&L 10 mm thick ceiling plaster in CM (1:4) on fair faces of concrete surfaces complete all as specified and directed.

Supply only water proofing compound Dr. Fixit/Fosroc complete all as specified and directed.

M&L, preparation of new plastered/un plastered surfaces and providing two coats of cement base paint as in walls complete all as specified and directed.

M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

M&L for preparation of wall and applying interior grade wall care putty 2 to 3mm thick to make the surface smooth as specified and directed by Engr-in-Charge. Make : Berger/Asian/JK/Birla

M&L for preparation of wall and applying exterior grade wall care putty 2 to 3mm thick to make the surface smooth as specified and directed by Engr-in-Charge. Make : Berger/Asian/JK/Birla

M&L for preparation of old decorated surfaces of walls (plastered) by brooming down with coir wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and finally clean with sand paper all as directed by Engr-in-Charge.

M&L for complete removal of existing treatment from wall upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper all as directed by Engr-in-charge.

M&L preparation of old decorated surfaces of ceiling (Plastered) by brooming down or sand paper, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots.

M&L one coat of white wash on already prepared surfaces of ceiling complete all as specified and directed by Egnr-in-Charge.

M&L one coat of white wash on already prepared surfaces of walls complete all as specified and directed by Egnr-in-Charge.

M&L one coat of oil bound distemper in any tint on on already prepared surfaces of walls complete all as specified in SSR Part I and directed by Engr-in-Charge (Note : OBD to be applied from company approved applicator

M&L one coat of cement base paint on already prepared surfaces of external wall surfaces complete all as specified in SSR Part I and directed by Egnr-in-Charge.

M&L two coat oil bound distemper any tint over a coat of primer on already prepared surfaces of walls complete all as specified in SSR Part I and directed by Engr-in-Charge. (Note : OBD to be applied from company approved applicator

M&L two coats of cement base paint on external on already prepared surfaces of walls surfaces complete all as specified in SSR Part I and directed Engr-in-Charge.

M & L preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of PU Paint complete.

M & L preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as speciied and directed.

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets any thickness incl cover fillets. complete all as specified and directed.

S & F false ceiling at all hieghts with semi perforated 12 mm thick micro tegular edged GRC ( Glass Fibre Rienforced Gypsum) false ceiling tiles of size 595x595 mm of approved texture, design and patterns , having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225;1987, non combustible as per BS 476 (part4)-1970 and light code description unit rate no. 429 SUB HEAD; 26.0 NEW TECHNOLOGIES AND MATERIALS reflactance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanised @ 120 grams per Sqm including both sides)

All as per item No 109.00 (Contd/--)… comprising of main- T of size 15x32 mm of length 3000 mm. cross -T of size 15x32 mm of length 1200mm and secondary intermediate cross -T of size 15x32 mm of length 600 mm to form grid module of size 600x600mm, suspended from cieling using galvanised mild steel items ( galvanizing @ 80 grams per sqm) i.e. 50mm long, 8 mm outer diameter M-6 dash fasteners , 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2mm. galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm center to center to center and 40mm long dry wall wood scres. the work shall be carried out as per specifications, drawing and as per direction of Engineer-in-charge

S&F repairs in solid PVC wall lining consisting of 5mm thick of wood grains PVC sheet inclusive of solvent cement and fixing to walls on PVC frame as per specifications and drawing complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

Cutting chases for concealed water tubing and making good in CM 1:3 on brick wall cutting n.exc 10 Cm in girth.complete all as specified and directed.

S&F rotational moulded polyethylene (triple layer white) water storage tanks 500 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of water tank and remove from site complete all as specified and directed.

S&F rotational moulded polyethylene (triple layer white) water storage tanks 1000 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of water tank and remove from site.

Supply and fixing in repair PVC connection 15 mm dia 450 tm long with brass fly nut at both ends complete.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including cantilever brackets of suitable angle iron,CP brass waste coupling ,superior quality PVC waste pipe and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete.

S & F in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including long neck 'P' trap spun cast 60 cm long fixed in asian eposy mortar connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete.

S&F in reapair 75 mm cast iron floor trap, spun cast, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed by the Engr-in-Charge complete

S & F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including bracket with 32 mm dia PVC pipe 600 mm long complete. Hindware/Parryware/Jaquar.

S&F in repair looking mirror 450x600MM mounted on decorative type PVC frame fixed to PVC rawal plug with CP brackets screw fixed, complete all as specified . Make : Parryware/hindware

S&F in repair 550x400mm wash basin, vitreous China (Flat back) including fixing and pinning in ends of brackets including pop up brass waste coupling or requisite size and waste pipe for bottle trap including fixing of waste fitting etc . Make : Hindware/Jaquare/Parryware

S&F in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. Make : Jaguar/Cat part No. KUP-35001PM/Hindware Cat Part No:F370001/Parryware Cat Pat No.T4302A2

S&F in repair brass chromium plated ovehead shower with shower arm complete all as specified and directed. Make : - Parryware Cat Part No T9985A1(Shower) & T-9999A1(Arm)/Hindware Cat Part No F160054 (Shower) & F190016(Arm)/Jaquar Cat Part No OHS 1999 (Shower) & SHA479L300 (Arm).

S & F in repair 15 mm dia bore chromium plated concealed stop cock, complete. Make :Jaquar/Hindware/Parryware

S&F in repair 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. Make : - JAGUAR Cat Part No FON-40053/Hindware Cat Part No F160017/Parryware

S&F in repair 15mm bore Bib taps short body, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make : - JAGUAR CAT Part No ALI-85037/Hindweare CAT Part No F-370004/Parryware

S&F in repair soap dish, brass, chromium plated,100X100X60mm, fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed. Make : Jaquar/Hindware/Parryware

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf with chromium plated guard and railing size 500X125mm (with brass bracket complete. Make : Jaquar/Hindware/Parryware

S&F in repair plate rack 200mm and size 90 x 75 cm made out off 1.00 mm thick stainless steel grade 304 complete all as specified and as directed.

S & F in repair PTMTgrating square 150 mm size complete all as specified. Make : Prayag Cat No. 115

S&F in repair Stainless steel cockroach Trap square of size (101X101 mm) Make : Prayag Cat No. FT 21

S&F in repairs brass chromium plated towel rail, 20mm dia 'D' type 60cm long between flanges. Make : Jaquar/Hindware/Parryware

M&L cleaning of water storage tank 500 Ltr capacity mechanically using pressure pump with disinfectant chemical including cleaning & removing all scale & dirt etc from existing tanks, mouths of circulating pipes and outer surface of any description & washing down in the manner for the following capacity :- complete all as specified and directed.( date of cleaning to be mentioned with stencil)

S&F in repairs 20 mm dia PTMT ball valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed all as specified and directed.

S&F in repair of Vitreous china wash down water closet pan (pedestal pattern) (cascade) , white including flushing cistern, Plastic water closet seat, white, closed pattern with flat bottom, and cover etc complete all as specified and directed by Engineer in Charge.Make : - JAGUAR bearing CAT Part No FLS-WHT-5351SN/ Hindware CAT Part No 92098 P-21 including trap (P or S type) Parryware Cat Part No VERVE10269

S&F in repair vitreous China wash down (EWC) water closet pan(pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including seat and cover for pedestal pattern complete all as specfied and directed. Make : Jaquar/Hindware/Parryware

S&F in repair half stall china urinals (wall type) complete incl plugs, bedding urinal to plugs with and incl 60 mm long brass screws, pointing around urinal back in cement including brass fitting for discharge pipe complete all as specified and directed by Engineer in Charge. Make : - Jaquar/URS-WHT-13263 size 340 x 310 x 660 mm/Hindware vinenzia Cat Part No 60012 Stan white pastel size 31.5 x 34.5 x 66 cm/Parryware Cat Part No EWHIZ size 360 x 345 x 565

Supply only 32 mm dia waste fittings, brass chromium plated for chinaware sink, WHB, etc with long screwed shanks and flynuts, flange embedded in red lead cement and other end fixed complete all as specified and directed. Make : Jaquar/Hindware/Parryware

S&F in repair bib taps long body, brass, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule complete all as specified and directed. Make : Jaquar CAT part no.ALI-85037/Hindware CAT part no. F-370004

S&F in repair 15mm dia chromium plated brass sink mixer with swivel spout (wall mounted) or mixing hot and cold water, screwed down for 15mm bore GI pipe complete all as specified & directed.Make : Jaquar CAT part no.CQT-CHR23309B/Hindware CAT part no. F280020CP/Parryware CAT part no. G3335A1

S & F in repair 15 mm dia CP brass Wall mixer with provision of over head shower complete with 115 mm long bend pipe, connecting legs & wall flange complete all as specified and directed. Make : Jaquar CAT part no. CON-CHR-281 KN/Hindware CAT part no. F280018 CP/Parryware CAT part no.G4017 A

S & F in repair 15 mm dia CP brass centre hole basin mixer (pillar tap) with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed.Make : Jaquar CAT part no. SOL-6001B/Hindware CAT part no. F450009/Parryware CAT part no. G0665A1

S&F in repair CP brass angle cock 15 mm bore . Make : - Jaquar CAT part no. CON-CHR-053KN/Hindware CAT part no. F200007 CP/Parryware CAT part no. G0253 A1

S&F in repair CP shower rose with or without swivel joints of 125 mm size complete all as specified and directed .Make : Jaquar CAT part no.HSH-CHR 1937/HindwareCAT part no. F160004 CP

S&F in repair CP Health Faucet with 1.20 mtr metalic expandable tube & hook complete. Make :Parryware CAT part no. T9941A1/ Hindware CAT part no. F160013/ Jaguar CAT part no,.ALD-573

S&F in repair Jet spray (L-Band) with 1 mtr expandable tube & hook complete. Make : Prayag Cat No.BEA-18

S&F in repair Plastic Water Closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated hinging device complete all as specified and directed.Make : Jaquar/Hindware/Parryware

S & F in repair toilet paper holder, chromium plated fixed to wall with chromium plated brass screws and rawl plugs complete all as specified and directed. Make : Jaquar/Hindware/Parryware

S & F in repair 20 mm dia brass chromium plated towel rack of 3 sets type 60cm long between flanges including pair of fixing brackets complete all as specified and directed. Make: Jaquar Cat Part No AKP-35781PS/CAN-1181FHS

Supply in repair PVC waste pipe flexible type 32 mm dia complete all as specified and directed .

Taking down CI/PVC /AC soil, waste and rain water pipes of 100/75 mm bore complete all as specified and directed.

S & F in repair 75 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall complete all as specified. Make : Supreme/Finolex .

S & F in repair 110 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall complete all as specified. Make : Supreme/Finolex

S & F in repair 75 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring,joints laid in trenches complete. Make : Supreme/Finolex

S & F in repair 110 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring,joints laid in trenches complete. Make : Supreme/Finolex

S & F in repair UPVC (SWR) bend, 75 mm bore' complete all as specified. : Supreme/Finolex

S & F in repair UPVC (SWR) junction single, (Single T) equal or unequalnd, 75 mm bore with access door complete all as specified. Make: Supreme/Finolex

S & F in repair UPVC (SWR) bend, 110 mm bore' complete all as specified. Make : Supreme/Finolex

S & F in repair UPVC (SWR) junction single, (Single T) equal or unequalnd, 110 mm bore with access door complete all as specified. Make : Supreme/Finolex

S & F in repair UPVC (SWR) cowl, 75 mm bore' complete all as specified. Make : Supreme/Finolex

S & F in repair UPVC (SWR) cowl, 110 mm bore' complete all as specified. Make : Supreme/Finolex

S&F in repair Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, incl nut and bolts and securing ends of stay to wall or roof for 75/100 mm bore CI pipe.

M&L for repairs of building expansion joints as follows: (a) Demolition of tiles with screed bed upto PGI sheet cover of expesion joints and remove all debries clean all the surfaces with gunny bags, wire brushes etc (b ) Apply 1 mm thik coat of Polmer primer- Make: Dr. Fixiit/Fosroc (c) Apply 1 mm thick coat of pidifine 2K- Make: Dr Fixit/Fosroc (e) Laying of fibre layer sheet glass mesh (f) Apply a coat of bitufixit with membrane of 2mm thick- Make: Dr Fixit / Fosroc (g) Laying of tiles over screed bed and 2 to 3 cm wide and 3 to 4 cm deep joint filled by Epoxy Note : Water ponding test carried out after applying of Pidifine 2k and after laying of tiles and approved by Engr-in-Charge

M&L in repair water proofing treatment on roof slab including picking, sweeping clean and washing down with water to remove dust & providing water proofing treatment described as under:- (a) Surface preparation with Asian smart care mortar and GP groute mortar and treating of construction joints, filling of honey combs with polymer modified mortar (Cement: Sand : smart care multipurpose polymer of Asian Paints or equivalent product of Thermax/ Berger ) (b) Cleaning the surface and applying (Resin & Hardner) smart care Epoxy Primer 2k of Make Asian paints or equivalent product of Thermax/ Berger ) on the cleaned surface for bonding of PU magnum with the existing concrete surface.

All as per item No 164.00 (Contd/--)… (c) Supplying, providing and applying water proofing treatment to Terrace area with Asian Paints Smart care PU magnum, single component highly elastomeric seamless cold applied modified PU coating or equivalent product of Thermax/ Berger) including all necessary surface preparation, coving using smart care multi purpose polymer, water pond test, etc. complete as per manufacturer's specifications and application methodology. The same coating shall be applied in two coats achieving a total thickness of 1mm. The coating shall have dual combination of 250% elongation . Execution to be done with authorised applicator of the manufacturer and company back guarantee to be given by the contractor. Work will be executed in smart assurance system complete all as specified and directed.

Cutting around the pipe 75/100mm bore waste pipe/soil pipe including taking out plant roots up to any depth in brick masonary and rejointing in pipe joint in epoxy mortar (Asian / Berger) and making good to existing surface all as directed by Engr-in-charge. (After the jointing pipe one week to be open for checking of leaking including scaffolding)

Cleaning of manholes not exceeding 1.5m depth and removing the sludge and burying the waste material in borrow pits. Note:-(cost of the borrowpit shall be deemed to be included in the quoted rates of this item).

M&L for dewatering and desludging of septic tank/sokage well of any size and depth by manually/mechanically (solid contents if not removed by mechanically should be removed by manually) and removing the sludge out side of MOD complete all as directed at site. After complete cleaning of septic tank the manhole cover shall be re-fixed in same position with CM 1:4 and bleaching powder spread on top surface of septic tank @ 1 Kg per septic tank complete all as specified and directed at site.

Pumping out sewage water from the man holes /Septic taank/soakage well at different locations by means of sewage tanker fitted with pump (5000 Ltr capacity) and disposing out off MD land as directed by Engineer-in-charge.

Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in soft/disintegrated rock.

Returning filling in including spreading levelling watering and well ramming in layers not exc 25 Cm. complete all as specified and directed.

Removing excavated material n exc 50 mtr and depositing where directed at a level n exc 1.5 mtr above the starting point complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or Reinforecd concrete) set in cement mortar 150 mm internal dia in cluding PCC bed.

M&L for150 mm internal dia salt glazed stoneware drain pipes grade 'A' laid in trenches and jointed as specified

M&L for concrete bed to drain pipes 150 mm internal dia including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete Type C-2 1:3:6 complete all as specified and directed.

M&L walling of random rubble, well bonded , bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and directed.

All as per serial item No. 175.00 above but except stones complete all as specified and directed by the Engr-in-charge.

M&L for raised pointing in cement mortar (1:4) to random rubble, uncoursed stone masonry or brought up to courses of any description complete all as specified and directed by Engr-in-charge.

M&L for rendering 15 mm thick in cement plaster on fair faces of brick or conctrete surfaces in cement mortar (1:4) rendering is to be finished even and fair without using extra cement as in septic tank/soak well / man holes.

M&L 65-75mm for reinforced precast cement concrete 1:1:2 with 1.25mm thick MS sheet painted with bituminous paint around the manhole cover (using 20mm graded stone aggregate) as in landings, cover slabs ( for manholes/ soak wells/septic tanks etc.) vibromatic, articles with plain faces including necessary form work using surface vibrator, complete CA No and date of casting to be engraved on the cover slab by stencil including demolition of reinforced cement concrete covers all as specified and directed. (Curing will be done in the water resverior . Reinforcement shall be measured and paid for separately under respective item of schedule 'A').

M & L for cement concrete ( 1:3:6 ) type C1 (using 20 mm graded stone aggregate) as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement and necessary form work, complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc

M&L PCC (1:4:8) type D2 (using 20 mm graded crushed stone aggregate) as in sub base finished even and rough to received top layer of concrete complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed.

Taking down carefully copper /aluminium point wiring (light, fan , socket or power) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls/floors and reuse the serviceable fittings under respective items complete all as directed.

M&L point wiring with 1.5 Sqmm (Nominal area) FRLS PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor in existing steel / PVC conduit with continuous earth wire 1.5 Sqmm FRLS PVC insulated, unsheathed stranded copper conductor cable and connected to common earth dolly, with and including 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0 mm thick hylum sheet cover fixed with brass screw complete with all accessories for one light point / Fan point controlled by one, one way switch.

All as per Item No 185.00 here in above but one three pin 5 Amps socket out let on the same board with other switches complete.

All as per Item No 185.00 here in above but one three pin 5 Amps switch socket out let on the independent board with other switches complete.

All as per Item No 185.00 here in above but One two way point controlled with switch 2 way complete all as specified.

All as per Item No 185.00 here in above but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 1.5 Sqmm FRLS copper conductor for continuous earthing complete.

S & F Switch piano flush type single pole one way 230 Volts 6 Amp complete all as directed. Make HPL/Havells/Anchor

S & F Switch piano flush type single pole two way 230 Volts 6 Amp complete all as directed. Make: HPL/Havells/Anchor

S & F Socket outlet 3 pin , 230 Volts 5/6 Amps flush type multipurpose 5 pin complete. Make: HPL/Havells/Anchor

Supply and fixing Socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type IS: 1239-1988 marked with valid CML No complete all as specified. Make: HPL/Havells/Anchor

Supply and fixing Switch piano; flush type, single pole, one way, 230 Volts 15/16 Amps IS: 3854 marked with valid CML No. complete all as specified. Make: HPL/Havells/Anchor

S & F step type regulator socket type single module 5 step for ceiling fan 1200/1400 mm size 230 volts, 6 Amps 120 watts . Make: HPL/Havells/Anchor

Supply and fixing Ceiling rose, three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified. Make HPL/Havells/Anchor

Supply and fixing of LED recessed mounted high efficiency down lighter 15 watt light fitting 1400 lumen, >5700k having conical metal back plate for heat sink, spring type mounting arrangement complete incl taking down existing fitting complete all as directed. Make: Crompton Proxima R or equivalent in Philips/Wipro

Supply and fixing LED recessed mounted 2'X2', 36 Watt and higher wattage in CRCA powder coated box type fitting with polycarbonate diffuser CCT >5700 K ,CRI >80,PF>.95 incl taking down old u/s fitting complete. Make Crompton greaves Polaris Nio - I or equivalent of Wipro / Phillips

S&F Air ventilation fan (square plastic body with louvers) 300 mm sweep single phase 230V, of 1250 RPM including connecting with three core 23/0.0076 copper wire from ceiling rose to fan complete all as directed incl taking out of old fan and depositing to MES store yard. Make : Bajaj / Crompton / Havells

Supply and fixing in replacement of surface mounted LED luminaries of size 300X300 MM 12 watt CRCA housing with brightness LEDs CCT >5700 K ,CRI >80,PF>.95 incl taking down old u/s fitting complete. Make CromptonPearl Nio- S or equivalent of Wipro / Phillips

S&F mirror light decorative compact luminaries with decorative ends caps 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete incl taking down old u/s fitting complete. Make Havells Cat No Edgelite/ Crompton LINNET or equivalent in Philips/Wipro

S&F wall/ceiling mounted decorative down lighter with 15 watt retrofit LED lamp with engineering plastic housing complete all as directed by Engineer-in-charge complete incl taking down old u/s fitting complete. Make Havells Cat No Crown or equilent in Philips/Wipro

S&F LED tube light fitting batten type with extruded alluminium body and polycarbonate diffuser all in one single phase 22/20 W with lamp 6500/4000 K complete pre-wired all accessories complete incl taking down old u/s fitting complete. Make Philips Smart Bright or Crompton LDLB-20-CDL/WIPRO TRMLED

Supply, fixing, connecting and testing of building security light luminaries with surge protector and photovoltaic/LDR sensor controlled made out of single piece die cast alluminium housing suitable for and including 1X45 Watt LED lamp type complete, pre-wired including bracket made out of 32 mm bore medium grade GI pipe made to shape with bolts, buts & washers of min 1.2 Mtr incl grouting of nuts or fasteners clamps and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified incl taking out old u/s fitting complete. Make Greenstar/ Philips/Wipro. Note: The unit rate include for painting to bracket with one coat of red oxide paint and two coat of alluminium paint before fixing

Supplying and fixing emergency lighting unit and exit signs self contain LED acrylic sheet wall mounted with one hour battery backup including battery and charger with sign label as per existing complete. Make: Compton Greaves /Bajaj/Phillips

M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with Two runs of 4 Sq mm as current carrying conductor and one run of 2.5 Sq mm as earth conductor PVC insulated FRLS cable with multi stranded copper conductor of nominal cross section area as under and drawing into existing steel/PVC conduit complete all as specified incl taking down old u/s sub main. Note:- Three runs of wire shall be measured as one meter only for payment purpose. Make:- KEI/Finolex/Havells/Polycab

Supply and fixing in repair of Distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection. Make:- Legrand/Hager/L&T AU (Note:- DB and MCCB/MCB shall be of same make.)

Supply and fixing in repair of double door Distribution board 7 segment 8 way 415 volt made out sheet metal suitable for and incl one MCCB as incoming, DP MCB of 63 Amps 10 KA C series as out going for each phase (03 Nos) and DIN rail mounted 8 MCB SP 10 to 32 Amps C series 10 KA for each phase (24 Nos) interconnected with suitable rated bus bar prewired, neutral and earthing link complete all as specified and directed by Engr-in-charge. Make-Lexic legrand /Schneider/Siemens

Supply and fixing in repair of MCCB 100 Amps FP 415 Volts having breaking capacity 15 KA with and incl spreader link kit complete suitable for fixing as incoming in polycarbonate busbar or DB Vertical TPN or 7 segment DB etc complete all as specified and directed. Make-Lexic legrand /Schneider/Siemens

S & F , MCB SP 6 to 32 Amp, 240 Volts, 'B' curve having breaking capacity 10 KA, air flow channels and ON/OFF indication.

S&F in repair of ELCB single pole and neutral 240 Volt, C curve 10 KA 40 to 63 Amps in existing DBs all as specified and directed. Make-Lexic legrand/ABB/Schneider/Siemens.

S & F in repairs, Isolator SPN 40 to 63 Amps, 240 Volts having braking capacity 10 KA.

S & F 18mm thick plywood coated with fibre reinforced plastic (FRP) 3mm laminated on both faces (3mm+12mm+3mm) and edges to be sealed with PVC edges binding tape for cupboard self and shutter complete as per specification and as directed by the Engr-in-Charge. Make : Jayna, Brown Crust, Plusch.

S & F 18mm thick plywood coated with fibre reinforced plastic (FRP) 3mm laminated on one faces (3mm+9mm) and edges to be sealed with PVC edges binding tape for cupboard self and shutter complete as per specification and as directed by the Engr-in-Charge. Make : Jayna, Brown Crust, Plusch.

RASHI CONSTRUCTIONS

M/S JAI PRAKASH GOEL