Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.1 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹30.0 L+₹2.5 L (9.24%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹30.7 L+₹3.2 L (11.7%)Rejected-Finance | L3 | Rejected-Finance Rejected | |
| 4 | L4₹31.1 L+₹3.6 L (13.3%)Rejected-Finance FLAT NO 1 GURUKRUPA APARTMENT BEHIND TELEPHONE EXCHANGE DEHUROAD PUNE | PUNE | PUNE | MAHARASHTRA | 412101 | L4 | Rejected-Finance Rejected | |
| 5 | L5₹32.7 L+₹5.2 L (19.0%)Rejected-Finance | L5 | Rejected-Finance Rejected |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
26 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Dehu Road, Pune
GE Dehu Road, Pune
REPAIRS TO DRAIN BOUNDARY WALL PLASTERING PATHWAY HARDSTANDING MISC WORKS AT 29 FAD AREA UNDER AGE BR EAST AT GE DEHU ROAD
2023_MES_599119_1
8772
Open Tender
Civil Works
Item Rate
180 days
GE Dehu Road, Pune
Pl ref tender documents
7 documents required · 7 mandatory
₹500
GE Dehu Road, Pune
₹98,000
Yes
24 May 2024
29 May 2023
28 Jun 2023
29 May 2023
26 Jun 2023
12 Jun 2023
Amount
Demolition of brick/stone masonry built in cement mortar all as specified.
M & L for brick work with sub class "B" brick st or curved on plan exceeding 6 mtr mean radious and built in cm 1:6 .
.-Ditto- As item no.2 above but Except bricks
Demolition of Re-inforced Cement Concrete in any position and any description including cutting of reinforcement bars to facilitate demolition complete all as specified and directed.
M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M & L for mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M&L for providing reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone agg) as in cover slabs. complete all as directed by Engr-in-charge.
M & L 15 mm thick cement plaster on brick wall in cement morat 1:4 and plastered surfaces shall be even and smooth without using extra cement complete.
M & L 15 mm thick cement plaster on brick wall in cement morat 1:6 and plastered surfaces shall be even and smooth without using extra cement complete.
M&L for preparing new plastered surfaces & applying two coats of cement base paint on walls. complete all as specified and directed.
M&L for preparation of new surfaces plastered or unplastered new surfaces & applying two coats of oil emulsion distemper on walls.
Demolition of cement concrete (unreinforced) of any description and in any position not ohterwise specifically provided for .complete all as sspecified
M/L PCC type D2 1:4:8 (40 mm Gr. Agg ) 75mm thick as in sub base.
M&L for laying machine pressed precast concrete interlocking reflective coloured pavers block any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade over 30mm thick sand layer watering and ramming all as specified.
M/L Chequared Cement Concrete (reflactive rubber molded) Tiles 30 CM x 30 CM X 25 mm th set and jointed in cement slurry and pointed in neat grey cement & pigment in floors over screed bed 15 mm thk in cm 1:6.
M&L for PCC type B1(1:2:4, using 20mm graded stone aggregate) as in bed blocks/coping/ edging all as specified and directed.
M&L for cement concrete 1:3:6 type C2 (using 40mm graded stone agg.) as in plinth protection 75 mm thick finished top surface even and smooth with out using extra cement
M & L for 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in sub base for hard standing complete all as specified and directed.
M&L for cement conceret 1:3:6 Type C-2 Using 40 mm graded stone aggregate as in surface channel and drain bed.
Extra for forming fair finished drain or channel 30 cm inner girth or more in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.
M & L for Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less completed all as specified
M/L PCC type B1 1:2:4 (20 mm Gr. Agg ) 50mm thick as in leveling course for floor finishes etc all as specified and as directed.
Finishing surface of concrete roads, pavements etc by belting/brooming complete all as specified and directed.
M & L for forming 12 mm thick expansion joints 150 mm deep, filled with preformed bituminous filler and top 30 mm primed and sealed with sealing compound grade 'A' complete all as specified and directed.
M & L for forming contraction (Dummy) joints 65 mm deep x 10 mm wide, filled with sealing compound grade 'A' complete all as specified and directed.
Demolition of and breaking up drain pipes (salt glazed ware) 450 mm dia set in cement mortor complete all as specified.
Ditto- all as item No.26 above but for internal dia of pipe300mm.
Ditto- all as item No.26 above but for internal dia of pipe 200mm.
M&L for 450 mm bore Reinfirced concrete pipes class NP3, laid and jointed complete with collars laid in trenches and jointed all as specified.
All as item No.29 above but for 300 mm internal dia of pipe.
All as item No. 29 above but for 200 mm internal dia of pipe.
M& L for PCC 1:4:8 type C-2, (using 40mm graded stone aggregate) as in bed of drain for 450mm bore pipe incl packing under and completely surrounding pipes with concrete after they are laid and tested for 300mm dia pipes complete all as specified and ditected by Engr-in-Charge.
All as item No. 32 above but for 300 mm dia RCC pipe.
All as item No. 32 above but for 200 mm dia RCC pipe.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar all as specified.
M&L for machine cut kota stone slab flooring 20-22 mm th over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing and polishing to receive mirror finish over 20 mm th screed bed in CM 1:6 complete all as specified and as directed.
Ditto all as above item ser No 71 but on skirting over 10 mm th backing coat in CM 1:4 complete.
M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete.
M&L Machine cut kadappa stone slab 20-25 mm th over cement screed base laid and jointed with grey cement slurry mixed with pigment to match.
Dismantling floor, hearth or wall tiling marble etc including cement mortar bedding,and not backing including removing serviceable tiles to stores and rubbish off the premises.
M&L for 40 mm thick plain cement concrete 1:2:4 type B-1 using (20 mm graded stone aggregate) as in sub base for leveling course.complete all as specified.
M&L for joint free non-skid ceramic tiles 7 mm to 8mm thick (square/rectangular) area of each tile exc 0.11sqm but n.exc 0.18sqm, of approved colour in floors, set and jointed in neat cement slurry and pointed with coloured cement to match the tile colour. over 15mm thick screed bed in CM (1:6) for floor.
Ditto above item No 42 but on skirting over 10 mm th rendering in CM 1:4 complete.
M & L Glazed ceramic coloured tiles 300 mm x 450 mm x 6 to 7 mm thick,as in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick rendering in CM (1:4) complete.
M & L Glazed ceramic coloured tiles 300 mm x200 mm x 6 to 7 mm thick,as in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick rendering in CM (1:4) complete.
M&L for vitrified coloured tiles 8 mm th (square/rectangular) polished area of each tile 0.30 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm th screed bed in CM 1:6 complete
Ditto above item No 46 but on skirting over 10 mm th rendering in CM 1:4 complete.
Shri Sant Cosntruction
KARPE AND SONS CONSTRUCTION
H S TAKHI
D J Construction
M/S OMKAR DEEPAK DHAVAN
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .