REPAIRS TO VARIOUS TYPE OF FENCING, GATE, DRAINS AT NORTH OF RAILWAY LINE UNDER GE MISAMARI

Amount

Demolition of brick work or stone masonry built in cement mortar incl all quoins arches pillars etc, complete all as specified and directed.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed.

Demolition of Reinforced cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L Cement Concrete (1:4:8) (using 40mm graded stone aggregate) in Foundations, Filling and Mass Concrete including use and waste Formwork as ordered/required at Site, complete all as specified and as directed.

M&L Brick Work with Sub-Class ‘B’ Bricks (with modular size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L Brick Work with Sub-Class ‘B’ Bricks (with modular Size Bricks),less than half brick thick on wall built in cement Mortar 1:3 complete all as specified and directed

Dismantling Bricks (laid Flat in Floor or laid on Side Walls of Brick Drains, Channels), etc., Bricks laid, bedded and pointed in any Cement Mortar, complete all as specified and as directed.

M&L Brick Work with size Sub-Class ‘B’ Bricks, laid on Edge as Side Walls of Brick Drains in Slope, Bedded and Jointed in Cement Mortar 1:6 and Pointed in Cement Mortar 1:3, complete all as specified and as directed.

M&L for PCC (1:3:6) type C2 (using 40mm graded stone aggreagte) as in surface channel and drains etc, complete all as specified and directed

M&L for 75 mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection, etc, complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded stoe aggreagte) as in coping bed block, etc ,complete all as specified and directed

M&L for redndering 15 mm thick in cement mortar (1:4) on concrete /brick masonry wall surfaces, mixed with WPC & 2% of cement, complete all as specified and directed. Note : WPC shall be meaured and paid separetely under relevant item.

Cleaning to Drain by taking out Brick Bat, Pebbles, Slits, Muds, Clay, Sludge etc from the bottom of Drains and culvert bed and removing to a distance not exc 50.00 Meter and depostied, complete all as specified and directed.

Supply only integral water Proofing Compund.

M&L Pre-cast Reinforced Cement Concrete (1:2:4) type B1 ( using 20mm graded aggregate) providing, in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts,boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar 1:4, complete with joints to match complete all as specified and directed. Note: Reinforcement will be Measured and Paid separately under relevant item.

M&L for TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.

Dismantling posts or struts (RCC) any section embedded in natural ground, including taking out embeded portion and making good disturbed ground in any type of soil, complete all as specified and as directed.

Excavation in post holes or simillar hole each n exc. 0.5 cum, getting out, returning , filling in and ramming earth or broken rubble mixed with earth around in layer not exc 25cm in soft/loose soil, complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

S&F MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, quality confirming to Fe-290 (Gde-E-165), complete all as specified and as directed.

M&L for MS work for fencing post and struts made from angle iron and flat iron in any section including cutting tops to shape , drilling holes and notching for fixing of wires etc confirming to Fe -290 or Fe -330, with and incl necessary nut and bolts of 12mm dia of reqd length, complete all as specified and as directed.

Dismantling fancing wire mesh, any type, complete all as specified and as directed.

Supply only chain link MS galvanised any mesh size or type, complete all as specified and as directed.

Fixing only chain link fencing including line wire, any mesh, size and any type of standards rails straining bolt etc including provision of binding wire complete all as specified and directed.

S&F in repair Galvanised 2 strand, steel barbed wire, 2.24mm dia barbed with 2mm dia barbs straining and fixing to any type of standard rails straining bolts, includigng, securing or tying at crossings with and provision of steel wire, staples or steel pins, etc, complete all as specified and as directed.

S&F repairs of seccon concertina coil 600mm dia (before stretching) with 10-12 stands of SRPBT wire of minimum dia 2.59 tensile strength of 1620 N/Sqmm with conforming IS -513DD grade & IS -4454 Part I/1981 grade-II for respective material of razor bldg and core wire including all fixing arrangements as per manufactures instruction for fixing & erection, complete all as specified and as directed.

Demolition/Breaking up Drain Pipes 600mm bore (dia), Jointed in Cement Mortar of any description including PCC of Packing and Haunching to Sides of the Pipes, complete all as specified and as directed.

Demolition/Breaking up Drain Pipes 900mm bore (dia), Jointed in Cement Mortar of any description including PCC of Packing and Haunching to Sides of the Pipes , complete all as specified and as directed.

M&L for 600 mm bore reinforced concrete pipes class NP3,laid and jointed complete with collars, preparation of surface, complete all as specified and as directed.

M&L for 900 mm bore reinforced concrete pipes class NP3,laid and jointed complete with collars, preparation of surface, complete all as specified and as directed.

M&L for cement concrete bed to drain pipe 900 mm bore (Internal) in cement concrete (1:3:6) type C-2 with (using 40mm graded stone aggregate) including packing under and complete surrounding pipes with concrete after they are laid and tested all, complete all as specified and directed.

M&L for cement concrete bed to drain pipe 600 mm bore (Internal) in cement concrete (1:3:6) type C-2 with (using 40mm graded stone aggregate ) including packing under and complete surrounding pipes with concrete after they are laid and tested all, complete all as specified and directed.

Demolition of stone slabs tiles of any description or thickness in floors aprons laid bedeed and pointed in any morter etc, complete all as specified and as directed.

M&L for Granite of any type 20mm thick cut beded and jointed with grey cement slurry and pointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete incl 20 mm thick bed in CM 1:6, as in floors, complete all as specified and as directed.

M&L for Granite of any type 20mm thick as in vertical surfaces, cut beded and jointed with grey cement slurry and pointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete incl 20 mm thick bed in CM 1:6, complete all as specified and as directed.

M&Lfor preparing new or perviously untreated Steel and Iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic Enamel paint (First quality) over a coat of Red oxide Zinc chorme pimer, complete all as specified and as directed.

M&L for Preparation of old painted steel surfaces of any description over 10 CM width or girth not otherwise described applying one coat of synthetic enamel paint, complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer, complete all as specified and as directed.

R R ENTERPRISES

M/S RANA ENGINEERING ENTERPRISE