MLA-SDF-MLA-SDF Irrumpanam VHSS Kitchen Construction of Tripunithura Municipality-New building-General Civil Work

Work Name:MLA-SDF-MLA-SDF Irrumpanam VHSS Kitchen Construction in ward 16 of Tripunithura Municipality-New building-General Civil Work

摮映硩湩⁧噐⁃楰数ⱳ映瑩楴杮⁳湩汣摵湩⁧楦楸杮琠敨瀠灩⁥楷桴挠慬灭⁳瑡ㄠ〮‰灳捡湩⹧吠楨⁳湩汣摵獥樠楯瑮湩⁧景瀠灩獥☠映瑩楴杮⁳楷桴漠敮猠整⁰噐⁃潳癬湥⁴散敭瑮愠摮琠獥楴杮漠⁦潪湩獴挠浯汰瑥⁥獡瀠牥搠物捥楴湯漠⁦湅楧敮牥椭⵮桃牡敧㈠‵浭搠慩ㄠ‰杋⽦浣ⴲ䔠瑸牥慮潷歲ⴠ䔠灸獯摥漠慷汬洀瑥敲Į㄀⸷〱㈮ㄮ债潲楶楤杮愠摮映硩湩⁧瑓楡汮獥⁳瑓敥⁁卉⁉〳‴ㄨ⼸⤸欠瑩档湥猠湩獡瀠牥䤠⁓㌱㠹″楷桴䌠䤮‮牢捡敫獴愠摮猠慴湩敬獳猠整汥瀠畬⁧〴洠Ɑ椠据畬楤杮瀠楡瑮湩⁧景映瑩楴杮⁳湡⁤牢捡敫獴‬畣瑴湩⁧湡⁤慭楫杮朠潯⁤桴⁥慷汬⁳桷牥癥牥爠煥極敲㩤䬊瑩档湥猠湩楷桴畯⁴牤楡潢牡㙤〱㕸〱洠潢汷搠灥桴㈠〰洠ѭ慥档ı㔀⸰⸹⸱㨱牐癯摩湩⁧潷摯眠牯湩映慲敭⁳景搠潯獲‬楷摮睯ⱳ挠敬敲瑳牯⁹楷摮睯⁳湡⁤瑯敨⁲牦浡獥‬牷畯桧⁴牦浡摥愠摮映硩摥椠潰楳楴湯眠瑩⁨潨摬映獡⁴畬獧漠⁲楷桴搠獡⁨慦瑳湥牥⁳景爠煥極敲⁤楤⁡…敬杮桴⠠潨摬映獡⁴畬獧漠⁲慤桳映獡整敮⁲桳污敢瀠楡⁤潦⁲敳慰慲整祬Ⱙ甠楳杮朠潯⁤畱污瑩⁹湁楪楬眠潯⁤樯捡潷摯Ɣ㤀㔮㌮㈮债潲楶楤杮愠摮映硩湩⁧慰敮汬摥漠⁲慰敮汬摥愠摮朠慬敺⁤桳瑵整獲映牯猠畨瑴牥⁳潦⁲潤牯ⱳ眠湩潤獷愠摮挠敬敲瑳牯⁹楷摮睯ⱳ椠据畬楤杮䤠䥓洠牡敫⁤⹍⹓瀠敲獳摥戠瑵⁴楨杮獥戠楲桧⁴楦楮桳摥漠⁦敲畱物摥猠穩⁥楷桴渠捥獥敳祲猠牣睥ⱳ攠捸畬楤杮瀠湡汥楬杮眠楨档眠汩敢瀠楡⁤潦⁲敳慰慲整祬‬污潣灭敬整愠⁳数⁲楤敲瑣潩景䔠杮湩敥⁲‭湩挭慨杲⹥䬊汩敳獡湯摥猠汥捥整⁤汰湡獫漠⁦桳敥桳浡眠潯㍤‰浭琠楨正猠畨瑴牥ﭳ⸹㠴㈮债潲楶楤杮愠摮映硩湩⁧⹍⹓䜠楲汬⁳景爠煥極敲⁤慰瑴牥湩映慲敭⁳景眠湩潤獷攠捴‮楷桴䴠匮‮汦瑡ⱳ猠畱牡⁥牯爠畯摮戠牡⁳瑥⹣椠据畬楤杮瀠楲業杮挠慯⁴楷桴愠灰潲敶⁤瑳敥牰浩牥愠汬挠浯汰瑥⹥楆數⁤潴漠数楮杮⽳眠潯敤牦浡獥眠瑩⁨慲汷瀠畬獧猠牣睥⁳瑥ɣ杫È伀㍄ㄱ㜴⼷〲㔲㈭㈰㨶畓灰祬湩⁧湡⁤楦楸杮椠汰捡⁥牧湡瑩⁥

ame board of slab area less than 0.9 sqm including engraving and painting letters etc. complete as per direction of Engineer in charge at sitej21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)Q
21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)´
21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sideso
21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)(OD334616/2025-2026:Engaging Man coolies