Repairs to Perimeter Wall all around the Cordite Factory Aruvankadu

Dismantling of Mild steel work of any description (Y or V type angle fencing on perimeter boundary wall of height 3.0m to 3.50 height) complete as directed.

Demolition of Concrete of any description and in any position complete as directed.

Dismantling fencing wire any type/ barbed wire concertina wire mesh on perimeter boundary wall all as directed.

M&L Brickwork with fly ash bricks of Old size bricks in cement mortar, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete as directed.

M&L Pre-cast cement concrete block masonry with solid blocks, Type C1 1:3:6, exc. 10 cm in width and setting in cement mortar 1:4, complete as directed.

Providing, cement concrete for copings, kneelers, apex stones, bed plates, kerbs, etc Type B1 1:2:4 roof kerbs or mud stops, rounded or chamfered on edges (at height of 3.0 -3.5 m height of Perimeter wall), including necessary form work complete as directed.

S&F for MS angle posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 (Y or V shape MS angle of size 50x50x6mm at a height of 3.0-3.5 m including drilling, welding etc.) complete as directed.

Fixing only MS angle posts and struts in fencing on perimeter wall at a heignt of 3.0m to 3.5 m, including minor welding if required, as directed.

S&F for Galvanised. 2 strand, steel barbed confirm to IS 278 -2001, wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc at height of 3.0-3.5 m as directed (each line wire to be measured)

Restraining, resecuring including making good staples etc. fixed in repairs of Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), work to be done as per MES SSR Specification.