Construction of seed lab cum godown under NMEO-OS at NRS, Vanarasi

Name of work :- Construction of seed lab cum godown under NMEO-OS at

SCHEDULE B:CIVIL & PLUMBING-DRAINAGE WORK ESTIMATE

No. Description of Item Unit Estimated Amount (Rs.)

Clearing and grubbing road land including uprooting rank vegetation

grass bushes,shrubs,sapling and trees girth up to 300 mm removal of

1 Hectare 0.02 84495.12

stumps of trees cut earlier and disposal of unserviceable materials(A) By

manual means in area of light jungle

Excavation for foundation upto 1.5 m depth including sorting out and

2 stacking of useful materials and disposing off the excavated stuff upto Cu.mt. 328.00 153.33

50 Meter lead.(B) Dense or Hard soil

Excavation for foundation for depth from 1.5 m to 3.0 m including

sorting out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(B) Dense or Hard soil

Excavation for foundation for depth from 3.0 m to 5.0 m including

sorting out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(B) Dense or Hard soil

Boring holes 3.5 m deep in ordinary soil (for cast in situ piles) and

getting out the soil and disposal of the surplus excavated soil as directed

5 within a lead of 50 Meter for following diameter of pipes.(ii) 230 mm Each 4.00 1335.63

Filling available excavated earth (excluding rock) in trenches. plinth,

6 sides of foundations etc. in layers not exceeding 20 cm. in depth Cu.mt. 467.00 133.66

consolidating each disposited layer by ramming and watering.

Filling in foundation and plinth with murrum or selected soil in layers of

7 20cm. thickness including watering, ramming and consolidating etc. Cu.mt. 174.00 296.30

Filling in plinth with sand under floors including watering ramming,

consolidating and dressing complete

Carring out plinth treatment to post construction / existing structure by

spraying chemical solution for termite control treatment including

labour and material consistment with I.S.I specification. Using Chlordene

and Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration Weight one

9 percent is recommended i.e one litre 20 EC chemical emulsion with 19 Sq.mt. 190.00 81.21

liter give 1 % concrentration inclusive of one litre chemical emulsion

appication at the rate of 5 Litre chemical / Sqm of surface is

recommended as per I.S

Providing and filling rubbles including hand packing and filling

10 interstices with quarry spalls behind abutments and between returns as Cu.mt. 14.00 1086.50

Filling in foundation and plinth with brick Bats Chhara in layers of 20cm.

11 thickness including watering, remming and consolidating etc. complete. Cu.mt. 2.00 615.58

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand

: 4- graded stone aggregates 20 mm nominal size) and curing complete

excluding cost of formwork in (A) Foundation and Plinth

Providing laying controlled cement concrete M-250 work with curing

complete including the cost of form work and excluding the rate of

reinforcement for reinforced concrete work in. Upto floor two level

Ground Floor ( A ) Foundations footings

Providing laying controlled cement concrete M-250 work with curing

complete including the cost of form work and excluding the rate of

reinforcement for reinforced concrete work in. Columns Upto plinth

Providing laying controlled cement concrete M-250 work with curing

complete including the cost of form work and excluding the rate of

reinforcement for reinforced concrete work in. Columns at all floor level

Providing laying controlled cement concrete M-250 work with curing

complete including the cost of form work and excluding the rate of

16 reinforcement for reinforced concrete work in plan for complete as Cu.mt. 17.32 5921.63

directed by engineer in charge. for Ground Beams and Plinth Beams

Providing laying controlled cement concrete M-250 work with curing

complete including the cost of form work and excluding the rate of

17 reinforcement for reinforced concrete work in plan for complete as Cu.mt. 12.00 6378.15

directed by engineer in charge. for beam at all floor level.

Providing laying controlled cement concrete M-250 work with curing

complete including the cost of form work and excluding the rate of

reinforcement for reinforced concrete work in plan for complete as

directed by engineer in charge. Sill at all floor level.

Providing laying controlled cement concrete M-250 work with curing

complete including the cost of form work and excluding the rate of

19 reinforcement for reinforced concrete work in plan for complete as Cu.mt. 4.00 7448.75

directed by engineer in charge. Lintel & Coping at all floor level.

Providing laying controlled cement concrete M-250 work with curing

complete including the cost of form work and excluding the rate of

reinforcement for reinforced concrete work in plan for complete as

directed by engineer in charge. all floor level Chhajja

Providing laying controlled cement concrete M-250 work with curing

complete including the cost of form work and excluding the rate of

reinforcement for reinforced concrete work in plan for complete as

directed by engineer in charge. Plinth Slab

Providing laying controlled cement concrete M-250 work with curing

complete including the cost of form work and excluding the rate of

reinforcement for reinforced concrete work in plan for complete as

directed by engineer in charge. slab at all floor level.

Providing laying controlled cement concrete M-250 work with curing

complete including the cost of form work and excluding the rate of

reinforcement for reinforced concrete work in. Staircase At all floor

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

24 bending, binding and placing in position etc complete at all floor level.as Kg. 10091.00 77.29

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional upto Plinth

Brick work using common burnt clay building bricks having crushing

26 strength not less than 35 kg./Sq.Cm. in Cement Mortar 1:6 (1- Cement : 6 Cu.mt. 34.00 4444.59

-fine sand)(B) Conventional at all floor level.

Half brick masonry in common brunt clay building bricks having crushing

strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:3 ( 1-Cement : 3-

27 coarse sand ) with 2 Nos of 6mm Mild steel round bars after every three Sq.mt. 154.00 740.45

course embedded in Cement Mortar in foundation and plinth (B)

Conventional at all floor level.

Half brick thick honey- comb brick work with common burnt clay

28 building bricks having crushing strength not less than 35 Kg/Sq.Cm. (i) In Sq.mt. 8.00 315.27

Cement Mortar 1:4 ( 1- Cement : 4 - coarse sand)

Providing & Fixing the Chikenmesh - 20 guage(Crimp Jali) of approved

size applying between the RCC and masonry junction in proper line, level

29 and plumb with all material, labour, tools, tackles and equipment. Sq.mt. 115.00 555.50

Including providing and fixing the jali with nails, etc complete as directed

by the site-in-charge.

Providing 10mm thick cement plaster in single coat on brick/concrete

walls for interior plastering upto floor two level and finished even and

smooth in (i)Cement mortar 1:3 (1-cement:3-sand) at All Floor level

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto floor

two level and finished even and smooth in (i) Cement mortar 1:3 (1-

cement:3-sand) at at all Floor level.

20mm thick sand faced cement plaster on walls above ground level

consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand)

and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc.

complete. at All Floor level.

Providing throating or plaster drip and moulding to R.C.C. Chhajja at all

Providing cement vata (10cm. x 10 cm. size) quarter round in cement

34 mortar 1:1 including neat cement finishing, watering etc. complete at all R.mt. 32.00 24.29

Providing & applying CHEMICAL WATER PROOFING treatment to the

terrace / sunk slab including cleaning the surface, opening the creaks in "

V " grooves pattened and filling the same water proof cement mortar 1:1

(1 cement: 1 sand ) including brick bats as directed to have proper slope

over a layer of C.M. 1:1 (1 cement: 1 sand) including finishing the top

surface with 15mm thick water proof cement plaster in C.M. (1:3) (1

cement: 3 sand) and finishing with a floating coat of neat cement slurry

35 using chemical water proofing compound as per manufactures Sq.mt. 21.00 443.80

specifications and standard specifications as per indian Water proofing

or equivalent including curing its with specified period as directed and

thickness to very between 75 mm x 150 mm to have proper slope and

gradient including vata of 100 mm x 100 mm size on with drip mould

inside periphery of the parapet / beam in C.M. 1:1 (1 cement: 1 sand )

etc. completed by EIC.

Providing and laying broken chine mosaic flooring for terrace using

mm to 20 mm broken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to bring mortar creme

out upto surface using white cement including rounding off junctions

and extending them upto 15 cm along the wall,clearing with water and

oxalic acid etc. as directed.

Providing and laying Vitrified tiles (GVT) 8 to 10 mm thick , 24'' x 24'' in

flooring laid on a bed of12mm thick cement mortar 1:3 (1-cement : 3-

coarse sand) finishing with flush pointing in white cement, etc complete

as per make list.

Providing and laying Ceramic tiles 6mm thick in flooring in Toilet and

landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-

coarse sand ) finishing with flush pointing in white cement. Complete at

all floor as per make list

Providing and laying Ceramic tiles 6mm thick in Toilet dedo on 10mm

39 thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with Sq.mt. 22.00 997.88

white cement slurry , etc complete as per make list.

Providing and laying polished Kota stone slab flooring for staircase

including grooves as per drawing over 20mm (Average) thick base of

cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty

40 :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed Sq.mt. 73.00 1010.92

with pigment to match the shade of slab including rubbing and polishing

etc. complete. (A) 25mm thick , etc complete as per make list.

Providing and laying polished kota stone for the staircase slab 25mm

thick in risers of steps,skirting Dedo and pillars laid on 10mm thick

cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray

cement slury mixed with pigment to match the shade of slab including

rubbingand polishing etc. complete. Complete at all floor as per make

Providing and fixing in Door ,Window sills and jambs 18 mm thick

Green Marble of approved shade and size laid over a bed of C:M 1:6

42 including cement floating, curing, rubbing, polishing, cleaning, moulding Sq.mt. 51.00 1575.60

on each side etc. complete and joints with white cement. Complete at

all floor as per make list

Providing and fixing Sandwiched granite and kota as Kitchen platform,

pantry, Basin counter of width 0.60 to 0.70 m with 18mm thick granite

of approved color + 30mm Cm in 1:4 + 20mm kotah stone one side

polished in one piece for kitchen / platform. The joint shall be filled with

white cement with pigments to match the color of the stone. The

cutouts for Kitchen sink if required shall be provided as per drawing. The

platform shall be supported on pair of polished kotah stone @ 0.75 to

0.90 m c/c filled with cement slurry. It shall include facia. The facia and

other edges shall be duly chamfered / rounded as per drawing. The

stone shall be of one shade only and different shades if found will be

rejected, finished sizes shall be measured & paid for.complete as per

detailed drawings & directed by E.I.C. Complete at all floor as per make

PARTLY GLAZED DOUBLE LEAF DOOR (LAMINATE FINISH):- Providing &

Fixing Partly Glazed Double leaf Door, of size as per deatil drawing (for

each door.) considering block board flush door sheet of 35 mm

thickness covered both side by 9 mm ply & finished with 1 mm thick

laminate on both sides of shutters and having 12 mm clear toughen

glass slits as per given pattern & size with crystal edges in both shutters

, fixed with burmaborder Patti at joints , Finishing with all necessary S.S

44 hardwires like DOOR S.S Handles 5PHO 2218SS -FPHO 2218 , conceal Sq.mt. 5.00 7332.60

Door lock Mortize Body 85x60M S.S , DOOR UK key CYLI,60MM 1CK S.S

KEY M/HL 125 ROSE SS ,cylinders, stoppers, tower bolt, MS nails, SS-304

screws,miscellaneous hardware items etc. As per details given in

drawing and as per instructions of Architect/consultant/Engineer In

charge. Complete at all floor as per make list

Providing and fixing FRP frame size 125x65 mm and 35mm thick FRP

shutter having extra reinforcement on sides & edges in polish finish. The

core of the shutter & frame is to be filed up with injected polyurethene

foam done in situ alongwith embedded wooden pieces for stiffening &

also taking hinges & fintures. The whole FRP frame & shutter is to be

water proof weather proof, termite proof & resistance to mild

acid/alkali. Rates are to be inclusive of S.S hinges with necessary screws

& alluminium S.S fixtures & fastenings & fastener sleeve. Complete at all

floor as per make list.

Providing and fixing window having extruded aluminum Colour

anodized section frame main outer size 63.50 x 38.10 x 1.95 mm,@ Wt

1.094 Kg / Rmt, horizontal two track member size 61.85 mm x 31.75 mm

x 1.20mm @ wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x

31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding shutters of

horizontal member size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,

vertical member of size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,

@ Wt. 0.457 Kg/mt with 5 mm thick transparent bronze colour tinted

float glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc

Complete for Window at all floor as per make list.

Providing and fixing standared extruded of alluminium section of size

63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized

47 alluminium frame for ventilation with 5 mm thick frosted glass as details Sq.mt. 6.00 1718.01

etc complete for Ventilation at all floor as per make list.

Providing and applying one coat of water based exterior primer of

approved brand and make as mentioned below on wall surfaces after

thoroughly brushing the surface free from mortar droppings and other

foreign matter. Item includes making the surface even and smooth by

sand papers. Rates are inclusive of all the material and labourers and

48 scaffolding work, cleaning of the floors etc. required for the work with Sq.mt. 353.00 152.76

weather proof exterior emulsion paint on wall surface (two coats) to

give an required shape even shade after thoroughly brushing the surface

to remove all dirt, and remains of loose powdered materials.etc

Complete at all floor as per make list.

Applying two coats of Birla (white cement based) or Asian (acrylic lapy-

putty) or equivalent & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other

49 foreign matter and sand papered smooth with Wall painting (two coats) Sq.mt. 610.00 121.65

of plastic emulsion paint of approved brand and manufacture on

undecorated wall / Ceiling surfaces to give an even shade (work for all

the floors) Complete at all floor as per make list.

Providing and fixing M.S. grills of required pattern to frames of windows

& ventilation etc. with M.S. flats at required spacings and frame

50 alround, square or round bars with round headed bolts and nuts or by Kg. 315.00 105.19

screws (A) Plain Grill. Etc complete as directed by architect /EIC at all

Roof & MS LADDER: Steel work, welded in built up sections framed work

including cutting, hoisting, fixing in position and applying a priming coat

of red lead paint. (A)In beams and joists, channels angles Tees, flats,

with connecting plates or angle cleats as in main and cross beams. Hip

and jack rafters, purlins conneted to common rafters etc all complete as

directed by EIC

Applying priming coat over new steel and other metel surface after and

including preparing the surface by throughly cleaning,oil,grease, dirt and

other foreign matter and scoured with brushes fine steel wood, scrapers

and sand paper with ready mixed priming paint brushing red lead. and

Painting two coats (excluding priming coat) on new steel and other

metal surface with enamel paint, brushing, interior to give an even

shade including cleaning the surface an even shade including cleanicn

the surface of all dirt, dust and other foreign matter. Complete at all

floor as per make list

Providing and fixing S.S. (16 Guage ASIS 304 grade) PIPE RELLING of

0.90m height as pattern shown in drawings at STAIRCASE with anchoring

0.075m in RCC or masonry including 50mm dia. SS pipe as hand rail,

32x32mm SS pipe as vertical support and 3 No.s - 16mm dia. SS pipe as

intermediate horizontal member including welding, grinding, fixing in

position with necessary fixtures and fastenings (25mm bracket, base SS

cap 50mm dia. hole, base SS cap 32x32mm hole, SS pipe cap 16mm hole

& 16mm long) and polishing etc. complete as per detailed drawings &

directed by E.I.C.

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior

glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to

wooden pluge with C.P. brass screws and washers. at all floor level.

Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished

iron J or L Hooks, Bolts and nuts 8mm diameter with bitumen and G.I.

55 limpet washer or G.I. limpet washer. filled with white lead complete Sq.mt. 70.00 734.19

excluding the cost of purlins, Rafters and Trusses.(1) 0.80 mm thick

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35Kg/ Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating coat of

neat cement on walls and bed concrete etc. complete.(iii) Inside

dimensions 600mm x 850 mm and 450mm deep for pipe lines with

three or more inlets.

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight.(i) Square mouth traps. (A) 100mm x

100mm size P type.

Supplying and fixing reinforced concrete heavy duty non-pressure pipes

with collars for culverts including setting and joining the pipes in C.M.

1:2 watering and laying (to level or slope) of I.S. class NP2 of following

internal diameters.(i) 300mm dia.

Providing laying and jointing in true line and level 15mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings make as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp

59 at every two metre C/C or shall be concealed as directed including R.mt. 10.00 72.65

necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings make as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp

60 at every two metre C/C or shall be concealed as directed including R.mt. 40.00 91.84

necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings make as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp

61 at every two metre C/C or shall be concealed as directed including R.mt. 30.00 148.12

necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

Providing, laying in treanches and jointing in true line and level 50mm

dia. U-PVC PLUMBING PIPE line (SCH-40) including fitting of (As per

make list) as approved by Engineer in charge. Pipe shall be fixed on the

wall with the help of clamp at every 2 meter c/c or shall be concealed as

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all

material including excavation for trenches and reffiling etc.. complete as

directed by E.I.C.

Providing & fixing 75 mm dia. PVC " Cowl Vent" of ISI make of working

63 pressure 4 Kg/sq.cm. with adhesive solvent cement etc. in true line and Nos. 3.00 33.33

level etc. complete as directed by Engineer In charge.

Providing & fixing 110 mm dia. PVC " Cowl Vent" of ISI make of

64 working pressure 4 Kg/sq.cm. with adhesive solvent cement etc. in true Nos. 3.00 43.43

line and level etc. complete as directed by Engineer In charge.

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working

pressure polythene pipes of the following outside Dia. Low densidy,

65 complete with special falnge compression type fittings, wall clipsetc. R.mt. 20.00 280.24

including making good the wall ceiling and floor.(F) 75mm

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working

pressure polythene pipes of the following outside Dia. Low densidy,

66 complete with special falnge compression type fittings, wall clipsetc. R.mt. 20.00 339.05

including making good the wall ceiling and floor.(F) 110mm

Providing, laying and jointing in true line and level 110 diametre

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and

other end socketed with rubber ring, & fittings conforming to ISI 14735-

1999 of approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be fixed on wall

67 using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 R.mt. 10.00 857.66

mm heigh at every 2000 mm center to center or shall be concealed in

walls as directed including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

Providing, laying and jointing in true line and level 160 diametre

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and

other end socketed with rubber ring, & fittings conforming to ISI 14735-

1999 of approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be fixed on wall

68 using of PVC clamp of the size 160 mm diametre x 210 mm length x 196 R.mt. 10.00 834.39

mm heigh at every 2000 mm center to center or shall be concealed in

walls as directed including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

Providing, laying and jointing (to level or slopes) 160mm diameter PVC-

U SWR pipes (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubbering and fitting conforming to ISI

14735-1999 of ISI (PRINCE / SUPREME / ASTRAL / FINOLEX / Equivalent)

or approved brand for drainage-line fitted in trenches including

69 excavation for trenches & refilling, Pipe shall be jointed with each other R.mt. 30.00 1111.00

with rubber lubricant, including necessary fittings such as bends, shoes

etc. including testing of pipe & joints and jointed with adhessive solvent

cement including the cost of all materials etc... completed as directed by

Providing, laying and jointing (to level or slopes) 110mm diameter PVC-

U RIGID pipes (Class 2) with working pressure 4 kg/cm² conforming to IS

4985-2000 with one end plain and other end socketed with rubbering

and fitting conforming to ISI 7834 of ISI approved brand for Rainwater

line fitted in floors or walls. Pipe shall be jointed with each other with

rubber lubricant, Pipe shall be fixed on wall using PVC clamps at every

70 2000mm c/c or shall be concealed in wall as directed including necessary R.mt. 15.00 342.39

fitting such as bends, tees, shoe bend, end cap for future expantion etc.

including testing of pipe & joints and jointed with adhessive solvent

cement including the cost of all materials including cutting and making

floors and walls as per original/good enough if require.... etc., complete.

as directed by E.I.C.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm

diameter with jali of the following nominal diameter of self cleansing

design with C.I scread down or hinged grating including the cost of

cutting and making good the walls.

Providing and fixing wash down water closet (European type, W.C. Pan)

with integral P or S trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) (A) vitreous China Pattern

:(i) in white colour including Providing and fixing plastic seat and cover

72 for wash down water closer with C.P. brass hinges and rubber buffers. Each 3.00 2252.90

(B) Black plastic seal and cover with Jet spray heavy duty with S.S.

Braided hose 60 cm long, Providing and fixing brass screw down stop

tap.(A) 15mm dia. etc. complete as directed by E.I.C. As per make list.

Providing and fixing to level or slope 110mm dia. PVC-U SWR W.C.

Connector of approved brand with lipring including rubber packing ring

fixing with adhesive solvent cement and testing the same air and water

tight... etc., Complete as directed by EIC.

Providing and fixing washbasin with single hole for pillar tap with C.I. or

M.S. brackets painted white including sutting holes and making good the

same including fittings.(A) Vitreous China:(ii) Flat Back washbasin

550mm x v 400mm size. (i) In white colour., including fixing C.P. Brass

waste coupling 32mm dia. & 32mm dia. rigid P.V.C. waste pipe &

Providing and fixing pillar tap, capstan head, screw down high pressure

with screws, shanks and back nuts. (i) 15mm dia., Providing and fixing

brass screw down stop tap.(A) 15mm dia., 15mm P.V.C. connection pipe

etc.. complete as ditectrd by E.I.C. As per make list.

Providing and fixing SS Sink Glosy ASIS 304 Grade x 1mm thick with over

all size 610x460 mm & bowl size 560x410x200 with C.I. or M.S. brackets,

painted white including cutting holes in walls and making good the same

75 including fittings and including the cost of providing and fixing rigid Each 1.00 2815.99

P.V.C. waste pipe of 32mm dia. and waste coupline 32 mm dia. and

testing the same for leak proof etc. complete as directed by E.I.C As per

Providing and fixing screw down bib taps of following size.(A) Brass

screw down bib tap polished bright. (i)15mm dia.

Providing and fixing pillar tap of approved ISI brand capstan head,

77 screw down high pressure with screws, shanks and back nuts. (i) 15mm Each 4.00 308.73

Providing and fixing chromium plated brass half trun flush cock of rom

78 made of approved quality including fixing in pipe line etc. complete.(i) Each 5.00 254.79

79 Providing and fixing brass screw down stop tap.(A) 15mm dia. Nos. 3.00 205.83

Providing and fixing Two way BIB cock with wall flange of genuine

Jaquar ompany brand, in with model no FUS-CHR29041, water tap

brand or approved ISI brand quality, fixing in pieline and testing the

same… etc., complete., as directed by EIC Complete at all floor as per

Providing and fixing ball cock of approved. quality as directed.(B)

Abonite (ii) 50mm dia.

Providing and fixing C.P. brass towel rail comlete with C.P. brass

82 brackets fixed to wooden plugs with C.P. brass scews.(B) 600mm x 20mm Each 3.00 616.43

Providing and fixing 40mm dia. Zoloto bronze handle valve including

83 fixing in pipeline and testing the same… etc., complete.as directed by EIC Each 2.00 2641.96

Providing and fixing 50mm dia. Zoloto bronze handle valve including

84 fixing in pipeline and testing the same… etc., complete.as directed by EIC Each 2.00 3753.81

Providing and fixing 25mm dia. Zoloto bronze handle valve including

85 fixing in pipeline and testing the same… etc., complete.as directed by EIC Each 2.00 1137.63

Providing erecting and fixing double coated ISI water tank of required

86 capacity each with all necessary fittings and connection etc. Complete at litre 2000.00 3.95

Terrace Floor as per make list

Providing and fixing Urinal of approved quality including connection

87 with trap and with integral longitudinal flush pipe.(A) Squating plate Each 2.00 1584.87

pattern white earthenware 550mm x 300mm.

Providing University Logo and Letter's Of different sizes Engraved on

88 Black Granite Stone, Painted with Gold Foil on it. Making a Plaque and Job 1.00 18180.00

Fixing it on the structure, Price with Labour

Providing and fixing rolling shutters of approved make made of 80 mm

wide M.S. laths inter-locked together through their entire length and

jointed together at the ends by end locks mounted on specially designed

pipe shaft with bracket plates, guide channels and arragements for

inside and outside locking with push-pull operation including the cost of

hood cover and spring etc. complete.(A) Shutters having width below

TOTAL AMOUNT OF CIVIL & PLUMBING-DRAINAGE WORK

TOTAL AMOUNT OF CIVIL & PLUMBING-DRAINAGE WORK