REPAIRS MAINT OF PUMP MOTOR OF DIFFERENT CAPACITY CHOLORINE PLANT AND ALLIED WORKS AND COMPREHENSIVE MAINTENANCE OF VEHICLES UNDER GE EAST BAREILLY

Amount

S&F in repair for glow sign board (box type) LED of required size 600 x 600 mm made out of MS sheet of suitable size with sheet fixed on front and marked with details of Pump House etc on front and rear with different colours including provision of LED tube light-(18 watt -02 nos) , fittings & fixtures in equal distance to illuminate board including connections with 2.5 sqmm single core stranded copper conductor cable and writing with 10 mm size letters complete all as specified and directed .

M & L Painting to pipe of pump house rising mains hydrants, sluice valves, pipe, fittings, NRV, discharge head etc after cleaning, srapping and making the surfaces free from rust of main externally and painting with two coats of synthetic enamelled paint in black/ blue/ red including marking/ writing on pipe complete as specified and directed

S&F in repair electric shock treatment chart coloured of size approximetely 900 mm x 600 mm & 6 mm thick plywood with Teak wood frame including covered with plastic laminated sheet complete all as specified and directed.

S&F in repair machinary maintenance chart coloured of size approximately 900 mm x 600 mm & 6 mm thick plywood with teak wood frame including covered with plastic laminated sheet complete all as specified and directed.

M&L for trimming vegetation or small inequalities clearing all grass vegetation, saplings, shrubs, brushwood, roots, and tree of surroundings area up to 500 sq mtr including cleaning and removing rubbish upto a distance of 50 mtr outside the periphery of the area under clearance of water supply installations 21 Nos, Pump house No-12,20/35,21,22,23,24,25,26,27,28,29,30,31,32,33,34,36,37,38,41 & 16/37 and STPs - 04 Nos, complete all as specified and as directed.(Note-trimming will be done two times during contrct at all installations of water supply).

S & F in repair Booster pump multi stage, suitable for 2 HP motor, for injecting chlorine gas doses by gaseous plant vacuum operated complete all as specified and as directed.

M&L repair to electric motor 2 HP, 3 Phase, 415 volts, for chloronome plant by removing unserviceable winding & re-winding the motor with super enameled insulated class copper wire of existing size, gauge and weight etc including varnishing, heating and replacement of motor bearings 2 Nos complete all as specified and directed.

S&F in repair electric motor 2 HP, 3 phase suitable for chloronome plant complete all as specified and directed

S&F in repair for Aviation light on OH tank 18/21 mtrs staging (on top of OH tank) with all fittings,fixtures,and accessories including 2.5 sqmm wire in 20 mm PVC conduit from light to connection points ,including 2-way MCB DB with isolator (10 Amp )capacity complete all as specified and directed.

M&L for installation of electronic Automatic level controller including probe unit ,five stage magnetic sensor concealed in stainless steel tube of required length,controlling box including systems incorporated with stage signal,high & low alarm,pump automation as directed (Model ALC Mark-I) capable to one tank from one pump complete all as specified and directed

M&L for laying in ground Wire from probe unit to controller of 10 pair PVC copper conductor (0.5 sqmm)all as specified and directed(Note:-this item shall be measured in accordance with the quantity required for item no. 10 above ,besides shall also be measured as required in existing level indicators) complete as specified and directed

S&F in repair 1100 volts grade heavy duty cable PVC insulated aluminum conductor screened served with inner sheathing of PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4mm GI suspension wire , one twin core cables flat or circular of size 10 Sqmm complete as specified and directed

S&F in repair Off load change over switch 200 Amp 4pole 415 Volt, complete all as specified and directed (Make- C&S /L&T or Equavalent as Approved by GE)

S & F in repair energy saving and environemntal friendly long life versatile pressure die-cast aluminium IP-65 roadway luminaire 72 W LED fitting with high power LEDs light source and electronic driver complete as specified and directed. Make C&S/Crompton/Surya or equivalent as approved by GE.

S& F in replacement new generation post top energy saving environment friendly, long aesthetically designed with symmetrical light distribution spun aluminium landscap luminaire with power LED,s of 35 Watt as light source of 35 Watt suitable for pole dia 76 mm complete all as specified and directed

S & F in replacement of street light brackets 40 mm dia GI pipe medicum grade upto 1.5 mtr long bend to shape including flat iron clamps and sutable nuts and bolts all as specified and directed

Material and labour for replacement of PVC insulated single core multistranded copper cable of size 1.5 sq mm unsheathed 1100 volts grade drawn through conduit / cassing capping on surface / pole /wall concealed and making good of disturbed surface including taking down unserviceable wire all as specified .

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed

Dismantling unserviceable main switch/DBs incl wooden board and deposit to MES store yard including making good disturbed surface of wall complete all as specified and directed

Taking down light fittings any type, tube light/wall bracket fitting/bldg security light fitting and fixtures, etc, and making good to the disturbed surfaces of walls/floor etc to macth with existing surfaces including white washing/colour washing /distempering to match with existing wall/floor/ceiling finishes.

Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces.

M & L Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable FRLS of size 1.5 Sqmm stranded for earth continuity wire, to be drawn in and including, PVC casing capping not less then 20 mm width with MS sheet metal sunken switch/Terminal box 1.2 mm thick and phenolic laminated sheet cover 3.0 mm thick and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified . .Note : Cutting chases and making good to match with the adjoining surface shall be included in the unit rate for (a) One light point controlled by one, one way switch

ditto all as per item no 22 above but One ceiling /exhaust fan point controlled by one switch, (Note : - Rate shall be included for connection of ceiling rose to fan by using 3 core flexible copper wire in white colour complete all as directed and specified

ditto all as per item no 22 above but One 3 pin 5 amp socket out point on the same board with other switches complete all as directed and specified

ditto all as per item no 22 above but One3 pin 5 amps socket out let point on independent board complete all as directed and specified

ditto all as per item no 22 above but for one socket outlet 15 amp on independent board with 2.5 Sq. mm cable and 1.5 Sq.mm. earth wire complete all as specified & directed.

Material and labour for switch piano flush type 5A, SP one way complete all as specified & directed.

Supply and fixing switch socket combination, 5 and 15 Amps, 230 volt, multi pin, flush type universal complete all as specified & directed.

Supply and fixing switch socket combination, 5 Amps, 230 volt, multi pin, flush type universal complete all as specified & directed.

Supply and fixing Lamp Holder(ISI Marked) PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified & directed.

S&F Ceiling rose, surface bakelite 65x50 mm three terminal Make Anchor or equivalent in GM /Plaza .

Supply and fixing Sub main wiring power/circuit using FRLS PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 2.5 Sqmm, earth continuity conductor of size 1.5 Sqmm to be drawn through and including PVC conduit 20mm dia concealed in walls/roof/floors all as directed by Engineer in Charge. (Notes:- (i)Two wires of 2.5 sqmm and one wire of 1.5 sqmm and one run of PVC conduit shall be measured as one unit.

Supply and fixing LED Tube light fittings 18 Watt MS batten with decorative cap, pre-wired for T8 LED tube light, including 18 Watt LED tube aluminium extruction lamp and mounting clamps etc. all as per makeHavells cat part No LHEXBQP5IN1W018 equivalent to CG/Philips/Bajaj complete.

S&F Bldg Security light energy efficient 1X20 Watt LED 6K Endura cityliner leaf (with Toughned glass) die cast aluminium and fixing arrangement of fitting including 1 mtr 35/50mm GI 90 degree bend pipe complete all as specified (Make: Havells cat No; LHETBXU7PA6S025 or equivalent to Philips/Bajaj /CG as approved by GE)

M&L for MCB DB made of sheet steel phosphatised, powder painted with bus bar 200 A, neutral link, earth bar and Din rail , 415Volts SPN with 8 way Double door all as per Cat No.607711 of Legrand or equivalent in Havells/C&S/ABB/Hager as approved by GE. Note - (1) The unit rate includes for cutting the brick walls to accommodate DB to make flush to wall. (2) The unit rate includes for making good the disturbed surfaces including finishes to match with the adjoining surface.

Supply and fixing MCB SPN 240 Volts, breaking capacity 10 KA of rating 6-32 Amps complete all as specified and as directed.

Supply and fixing MCB SP breaking capacity 10 KA of rating 6-32 Amps complete all as specified and as directed.

M&L for Earthing with galvanized steel earth plate electrode of size 600 mm x 600mm x 6.0 mm buried directly in ground (earth pi n ot less than 2.25 Mtr b elow normal ground level) connected to galvanized earth lead strip of size 25mm x 4 mm by means of bolts, buts, check nuts and washers of galvanized iro n on steel including 40 mm dia light grade GI tubing for protection of earth lead, MS sheet m etal funnel with wire mesh, watering pipe medium grade 20 mm dia, charcoal or coke and common salt in alternative layer of 15 Cm compacted thickness all around the electrode with concrete earth pit of PCC 1:3:6 type 1.50 mm thick precast RCC (1:2:4) type B1 pit cover reinfored with 8 mm dia deformed bar and suitable handle made of 10 mm dia round bar including aluminium strip of size 25 mm x 3 mm for extension of earth lead and necessary excavation, earth work, in soil/loose soil and disposal of spolis to a distance n ot ec 15 Mtr and necessary connection and testing complete all as shown n electrical plate No. 3 and all as direted and specified.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 for concealed water tubing and making good, cutting not exceeding 5 to 10cm girth in RCC/stone walls complete all as directed.

Taking down the Unseviceable LT panel installed at PH and replacement with following new parts for Wall mounted LT panel board indoor type of size 1200mm x 1200 mm x400 mm with sheet CRCA sheet of 2 mm thickness comprising of following :- (a) Supply and fix in repair 3 pole power contactor type ML 4 suitable for operation on,440 Volts ,AC, 50 Hz -03 Nos (b) Supply and fix in repair over load protection relay with relay range 45-75A suitable for operation on 3 phase, 415 V -01 Nos (c) Supply and fix in repair voltmeter three phase anologue type class 1 voltage range 0-500 V flush mounting 96x96mm (d) Supply and fix in repair ammeter three phase anologue type 5A class 1 of range 0-200 A flush mounting 96x96mm inculding CT 200/5 (e) Supply and fix in repair MCCB 125 A capacity 3 pole for 415V -01 Nos (f) Supply and fix in repair MCCB 200 A capacity 4 pole for 415V -01Nos (g) Supply and fix in repairs indicating lamp on all 3 phases R Y B -01 set (h) S&F wiring with PVC insulated multistranded copper conductor single core cable 4 sq mm (Nominal cross sectional area) as per site requirement including suitable size of copper lugs etc all as specified and directed-01 Job (j) S&F in repairs single phase preventer direct mounting type with relay range 28-40 A 230 Volts suitable for electric motor of water supply installation-01 No (k) Supply and fix in repairs electronic timer type ST 100 suitable for operation on 240/360/415 volts 50 Hz for 3-10 Sec-01 Nos. (l) Painting complete panel board with one coat of synthe enamelled paint of silver colour ( inside and outside) complete -01 Job

Supply & replacement of Contactor ML-3 ,suitable to operate 35-45 HP submersible pumping set Cat part No SS-90721 Make-L&T or equivalent as approved by GE.

Supply & replacement of Contactor ML-4 ,suitable to operate 50-60 HP submersible pumping set Cat part No SS-90910 Make-L&T or equivalent as approved by GE.

M&L for cleaning of RCC Over Head Tanks of capacity 1 lakh gallon, removing and taking out sand, sludge and mud etc including disposal of the same at a distance not exceeding 100 mtrs from the tank,including two coats of whitewash on whole internal walls of OH Tank complete all as specified & as directed . NOTE: -All the safety equipments for workers working on OHT and U/G Sumps will be provided by the contactor.Cleaning of OH tank is in every 6 month or contracor is responsible to clean all OH tank two time in their contract period at same cost quoted rate.

Ditto all as per item no 43 above but capacity 50000 gallon.

Ditto all as per item no 43 above but capacity 25000/35000 gallon.

Supply only Aquafit (Calcium based granular disinfectant) for water treatment ,Packing in 45 KG ,plastic drums complete all as specified and directed .

M&L MCCB , 4 pole, 415 Volt, fixed type 125 to 160 amp with breaking capacity 36 Ka complete all as specified and directed.

M&L MCCB , 4 pole, 415 Volt, fixed type 160 to 200 amp with breaking capacity 35 kA complete all as specified and directed.

Repair and servicing of powder base vacuum type chloronome for smooth functioning including necessary spares at their own cost required for rectifying the defects to be included for smooth functioning the plants for the following plants :- Location :- Pump house No. 21,22,23,26,35,37,41 and swimming pool etc Note:- (i) For smooth functioning the complete spares plants and rewinding & repair of mixing motor has to concluded in the quoted rate. (ii) All testing equipments to be used in installations. (iii) Contractor should be well equiped with proper protection of chlorine gas and mask should be kept with all operators.

Supplying only caustic/Soda crystals/Soda Ash powder in 5 Kg vacum packets complete all as specified and directed

Supplying only Soda lime powder in 25 Kg vacuum packets complete all as specified and directed

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m depth for laying of pipe/foundation etc or for shaft well cess pits manholes pier holes etc and not exceeding 1.5 m in depth and n.exc 10 sq m on plan and getting out in soft/loose soil complete all as specified & directed.

Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified & directed

Removing excavated materials (soil) to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified & directed

M&L for boring the holes under roads pavements, hardstanding by treanch less techonology, using ultrasound technique and necessary machine including CI Pipe of 100 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed.

M&L for cutting of roads for laying of pipe under roads, pavements, hardstanding by excavation and making good after laying and testing complete all as specified and directed.

Taking up and down steel tubing and connections, including cleaning for re fixing or removal to store of 25 mm dia bore of pipes complete all as specified and directed.

Taking up and down steel tubing and connections, including cleaning for re fixing or removal to store of 20 mm dia bore of pipes complete all as specified and directed.

Taking up and down steel tubing and connections, including cleaning for re fixing or removal to store of 15 mm dia bore of pipes complete all as specified and directed.

Supply and laying steel water tubing medium grade of following bore fixed with wall/laid in floor with and including all GI fittings as required at site complete all as specified and directed for 25 mm bore .( Make:-TATA/JINDAL/Zenith or equivalent as approved by GE)

Ditto all as per item no 60 above but 20 mm bore

Ditto all as per item no 60 above but 15 mm bore

S&F Gate valve of following sizes as specified and directed. Make : NMV, ZOLOTO, LEADER or equivalent as approved by GE. (a) Gate valve of size 50 mm.

Ditto all as per item no 63 above but Gate valve of size 40 mm.

Ditto all as per item no 63 above but Gate valve of size 25 mm.

Ditto all as per item no 63 above but Gate valve of size 20 mm.

Ditto all as per item no 63 above but Gate valve of size 15 mm.

S&F of 'D' Joint of following dia complete all as specified and directed. 80 mm dia

Ditto all as per item no 68 above but 100 mm dia

Ditto all as per item no 68 above but 150 mm dia

Ditto all as per item no 68 above but 200 mm dia

M&L for repair/rectification of leakage/blockage to water supply distribution lines of 15mm dia to 20mm dia of GI tubing by necessary excavation, returning /filling as required , tightening of lose joints of union ,elbow, socket nipple as per site requirement including for replacement of GI union ,socket, nipple as required complete all as directed.

Ditto all as per item no 72 above but 40 mm dia

Ditto all as per item no 72 above but 50 mm dia

M&L for dewatering complete trenches manually for repairing joints by cocking and inserting spurn yarn and Run lead joint, making good/ leakless the existing joint including necessary excavation and earth work like returning, filling etc for pipes of following dia complete all as directed. (a) 80 mm dia

Ditto all as per item no 75 above but 100 mm dia

Ditto all as per item no 75 above but 150 mm dia

Ditto all as per item no 75 above but 200 mm dia

M&L for dewatering complete trenches,Repair/rectification of leakage and blockageof PPR pipes manually repairing joints by inserting proper accessories and fittings of PPR pipes making good/ leakless the existing joint including necessary excavation and earth work like returning, filling etc for pipes of following dia complete all as directed. (a) 10 mm dia

Ditto all as per item no 79 above but 90 mm dia

Ditto all as per item no 79 above but 75 mm dia

Supply and fixing CI fittings for CI Bends, connecting pieces, bell mouth pieces, tapers, tee pieces of one end flanged and other end spigot or socket upto 150 mm dia complete all as specified and directed.

S&F of Non Return Valve of following sizes at various pump houses complete as specified and directed. Make: KIRLOSKAR, RAMCO or equivalent NRV of 150 mm dia

Ditto all as per item no 83 above but NRV of 200 mm dia

Supply only lead for fitting in CI pipe joints complete all as specified and directed

S&F in repairs electronic timer type ST 100 suitable for operation on 415 volts 50 Hz for 3-30 Sec all as specified and as directed. Make : L&T or equivalent as approved by GE.

S&F in repairs electronic timer type ET 100 suitable for operation on 415 volts 50 Hz for 3-10/30 Sec all as specified and as directed. Make : L&T or equivalent as approved by GE.

Supply only grass and weeds killer chemical of make Roundup all as specified and directed.

S&F rubber mat of size 1mtrx2mtrx12 mm at installation of make jyoti or equivalent as directed by Engr-In-Charge

S&F pressure gauge of dial 30 to 60 suitable for fixing at 100/150 header mm pipe with all fiting andf fixtures of make guru or equivalent as specified and directed.

S&F mini motor protection relay for 35-51hp submersibble motors of make L&T all as specified amd directed.

M&L for provision of new wash out points by proper cutting and screwing of existing DI/CI/GI pipe fixing reducer tee of suitable size, supplying and fixing, Jointing, testing CI sluice valve of following size by fixing 02 Nos at each wash out point with flanged ends including necessary mountings nuts, bolts washers and packing fibers gasket on both end and making pit chamber including iron frame cover 3.15 mm thick with locking arrangements complete all as specified and directed for Wash out point at 150 mm bore pipe

Ditto all as per item no 94 above but Wash out point at 100 mm bore pipe

Supply and fix in repair spare conntact kit for ML 3 contractor complete all as specified and directed . (Make :- L&T/Havells/C&S or equivalent as approved by GE)

Supply and fix in repair spare conntact kit for ML 4 contractor complete all as specified and directed . (Make :- L&T/Havells/C&S or equivalent as approved by GE)

S&F in replacement of Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weigh 15mm- 20mm125gms).complete all as specified and as directed.

M&L for dismantling of motor, 3 phase, 7.5 KW, taking out burnt winding wire from stator, cleaning all slots properly, repair of pump/rewinding the motor with proper guage of super enamelled winding wire and varnishing properly including baking and providing insulation and packing properly re-assembling the motor with pump and installed at its proper position and testing the same including connection plate complete all as specified and as directed.

M &L Lifting/taking out defective submersible pump of any capacity alonwith column pipe of any size and submersible cable , dismantling the pump from motor, setting aside for repair /servicing / overhauling including lowering the pump set into borewell, replacemt of packing and nut bolts ( if required) and testing after the completion of repair works in the presence of GE/ Engr in charge .

M&L Rewinding to submersible pump 50 HP of any make with super enameled copper winding wire PVC coated 2 mm thick as per taken out qty , Providing PVC separators , PVC sleeves & jointing compound as specified and directed. Note :- Rewinding, replacement items will be measured and paid seprately under relevent item.If the same motor copper winding wiring burnt second time in the above CA Period, The contractor is responsible to paid and rewind the same at their own cost.

Ditto all as per item no 101 above but capacity 41 hp

Ditto all as per item no 101 above but capacity 10/15 hp

Supply only the following parts of the submersible pump and motor for capacity 50/41/10/15 HP of original company as approved by Accepting officer. Make : KSB, Crompton,Kirlosker Supply only Thrust bearing plate made out of carbon for submersible motor

Supply only Gun metal bush for submersible motor

Supply only Shaft sleeve made out of stainless steel for submersible motor

Supply only Clamp stud for submersible motor

Supply only Rotor balancing of submersible motor

Supply only Shaft grinding of submersible motor

Supply only GM Neck Ring for submersible pump

Supply only Stainless steel sleeve for submersible pump

Supply only Stainless steel pump shaft for submersible pump

Supply only Stainless steel impeller for submersible pump

Supply only Cast iron bowl for submersible pump

Supply only Rubber bush for submersible pump

S&F in repair sluice valve class PN-1.6 heavy duty flanged ends drilled ISI marked confirming to IS: 14846 suitable for 150 mm bore pipe, wheel operated (Handle) with high tensile stainless steel spindle, including nuts, bolts and jointing with jointing materials etc. complete including taking out old existing unservicable sluice valve including making arrangement for safe working all as specified and directed. Make: BIR, KIRLOSKAR ,Kartar or Equivalent a approved by GE

S&F in repair sluice valve class PN-1.6 heavy duty flanged ends drilled ISI marked confirming to IS: 14846 suitable for 100 mm bore pipe, wheel operated (Handle) with high tensile stainless steel spindle, including nuts, bolts and jointing with jointing materials etc. complete including taking out old existing unservicable sluice valve including making arrangement for safe working all as specified and directed.Make: BIR, KIRLOSKAR ,Kartar or Equivalent a approved by GE

M&L for dismantling of non clog type centrifugal pump set of capacity 12.5 HP either fixedor floor or on trolley mounred and taling out unsv spares and performin following operation to complete the task-: Rewinding of the motor centrifugsal pumping set with insulated copper winding including sleeves as per originsl approved and replacement of worn out parts including griding of parts testing & transport charges complete all as specified and directed. replacement of motor bearing with lock nut -02 Nos Repalcement of fan motor-01 No Replacement of star coupling set with rubber-01 Each

Dewatering of inner sump by potable pumpiong set and taking out complete the sanitary materials and other wastage from sluice valve connect from outer sump well for equalisation of water in both well all as specified and directed

Take the water sample from the bore well at ph no. 12,21,22,23,24,25,26,27,28,29,30,31,20/35,32,33,34,36,37,38,41, MH PH and two consumer end and send it for physical/Chemical/Bateriological test from any recognised govt agency (two times in contract period) and provide its report to Engr in charge.

Supply fixing testing and commissioning submersible cable flat 16 sqmm 3 core PVC insulated and PVC sheathed with multi stranded copper conductor 1100 volts grade fixed to submersible motor column pipe using suitable size of clamps made out of stainless steel flat of size 20x2 mm with steel nuts bolts & washer foe every column pipe of 3 mtr lenght all as specified and directed.

Supply and replacement of CI pipe 150 mm bore flanged ends class LA- ISI marked including necessary nuts bolts and packing etc complete all as specified and directed.

Supply install in repair and commissioning of Granular chlorination dosing pump of high pressure single head gear motored adjustable dosing pump having output of 2 U.S. GPD to 40 U S GPD and adjustable high pressure of up to 100 PSI (7 kg/cm2)or more ,power input 230 V,50 HZ self priming with nonmetalic with connecting nuts ,ferrules and with all accessories including lead,tubing connection injection check valve complete all as specified and directed. Preparation tank(300 ltr) (i) Water inlet line (ii) Outlet with strainer (iii) Drain (iv) Overflow (v) Conical bottom for sludge deposition (vi) Pot hole with cover (viiLevel gauge (viii) Inspection port (ix) Agitator 120 watt 900 RPM single phase mounted with plastic shaft and impeller. Service Tank (100 ltr) (i) Water line inlet (ii) Dosing pump inlet arrangement (iii) Drain (iv) Overflow (v) Level gauge (vi) Inspection port make-:Declibac/Briozing

Repair/maint of vehicles- Tata 207 , Tata Xenon , once in a month for 06 Months by cleaning the vehicle from outside with the help of soap/shampoo /car washing detergent completely by removing dust and dirt from under side of the vehicle, checking of lubricants oil ,water, brake oil and other acessories fluid and top up it if required. Cleaning the vehicle from inside with the help of suction pump removing dirt and dust from complete unit, cleaning of dash board with the help of suitable mild cleaning agent of car . Cleaning of radiator of vehicle, checking its efficiency and proper functionng, checking of brake of the vehicle and do minor repair if required.Do suitable oiling and greasing. Checking allingnment of the wheels functioning of wiper, indicators ,back and front light ,suspension system,leaf spring, music system, and all electrical work like wiring and testing of all lights and bulbs,repair of puncture of tube inner if any complete all as specified and directed

Ditto all as per item No 124 above but for Eicher 10.70/10.75 complete all as specified and as directed

Ditto all as per item No 124 above but for Hindustan Car Ambassador complete all as specified and as directed

Repair/maint of vehicles- Motor cycle-Royal Enfield , once in a month for 06 Months by cleaning the vehicle from outside with the help of soap/shampoo/washing detergent completely by removing dust and dirt from under side of the vehicle, checking of lubricants oil , brake oil and other acessories fluid and top up it if required. checking of brake of the vehicle and do minor repair if required.Do suitable oiling and greasing. Checking of brakes ,clutch and accelerator,Chain & socket , indicators ,back and front light ,suspension system,and testing of all lights and bulbs,repair of puncture if any ,complete all as specified and directed

ditto- as above item No 7.00 but for Motor Cycle Hero complete all as specified and as directed

(A) Tata 207 DI/Tata Xenon Servicing and Repair/Maintenance of Vehicles- Tata 207,Tata Xenon each two times at interval of 2 & half months comprising checking and repair/replacement of unserviceable spares of engine ,self starter , gear box FIP(Fuel Injector Pump), shaft,shocker and suspension system ,braking system inlcuding brake shoe ,Radiator cleaning, replacement of all type of filters and greasing of all wheels, Wheel alignment and wheel balancing by computerized Machine including tyre rotation etc of Vehicles including dismantling / Replacing of defective parts with new parts at workshop complete all as specified and directed by Engr in charge Note :-1. Spare parts shall be measured and paid separatly under relevant items here in after as "SUPPLY ONLY" but fixing of the same deemed to be included in unit rate. 2.Engine Oil will be supplied free of cost by the department but topping and refiling will be done by the contractor. 3 Brake oil, gear oil and coolant shall be measured and paid separatley . 4 Servicing of vehicle shall be carried out at authorised workshop only. 5.Other minor consumable items like nut bolts washer , cotton waste etc are deemed to be included in the quoted rate

Supplu only Air filter ,Oil filter and Fuel filter each set of three Make - Micro ,bosh

Supply only Brake oil

Supply only Steering/gear oil

Supply only Coolant

Supply only Clutch and pressure plate set including clutch bearing and clutch cylinder,Cluthch Paddle complete Make -C K or eqlt

Supply only Head light assembly complete with Bulb and connection complete . Make - Autopal, Helonix,Lumax

Supply only Head light bulb Helogen 12 volt 60 watt Make - Autopal,Helonix

Supply only Fog lamp

Supply only Brake/ Back light Assy Make - Autopal, K K

Supply only Indicator Assy Make - Autopal, K K

Supply only Wipper Assy with blade complete make -Syndicate,Champion etc

Supply only Water pump assembly

Supply only odometer

Supply only Door Lock assembly Make -Syndicate,ATS

Supply only Water pump assembly

Supply only Coolant bottle with pipe

Supply only Mud pad of best quality

Supply only Side looking mirror of side doors of best quality

Supply only Fan v belt Make -Fenner

M & L for rewinding of self starter of Vehicles with super enamelled insulating copper wire of existing gauge , insulating materials including assembling and testing complete all as specified and directed by Opening and dismantling of self starter, and replacing with following items. (a) Carbon brushes -01 Set (b) Solenoid Switch -01 No (c) bendix -01 No (d) Fly wheel -01 No (as per sample).

M & L for repair of alternator including repair/replace of rectifier assembly and repair/replace of rotor assembly complete all as specified and as directed

M & L for repair of suspension system by Dismantling front wheel and wheel joint upper and Lower of suspension system,leaf springs, reassembling and testing after repair including replacement of following items:- (a) Suspension Kit -01 Kit, (b) Lower arm bush -08 Nos. (c) Upper arm bush -04 Nos. (d) Wheel joint upper -02 Nos. (e) Wheel joint lower -02 Nos. (f) Coil spring pad -02 Nos. (g) Tie rod end -04 Nos. (h) Upper arm bolt -02 Nos. (j) Kamani bush front -01 No. (k) Penion bearing -02 Nos. (l) Penion -01 No. (m) UJ Cross -01 No. testing complete all as specified and directed

Repair of Wheels and braking system including servicing and testing of master and slave cylinder by Dismantling front and rear wheels, greasing, brake work including replacing the following items:- (a) Brake pad front wheel -04 Nos. (b) Rear wheel brake shoes -08 Nos. (c) Wheel bearing inner -02 Nos. (d) Wheel bearing outer -02 Nos. (e) Wheel cylinder kit -01 No. (f) Brake plate assly -01 No. (g) Brake pad assembly -04 Nos.(h) Brake lining-01 No

M & L for repair of Master cylinder complete

Repair of fuel pump and testing on testing bench reassembling after repair and replacing with following items:- (a) Valve lifter -01 No (b) Spring -01 No and other items as required

Opening steering assembly, removing stearing rack, lathe work, facing, ramming including replacing the following items:- (a) Centre pin bush -02 Nos. (b) Centre bearing assly -01 No. (c) Link rod repair kit, (d) Check nut -02 No. (e) Lower stearing oil -01 Ltr.

Denting and Painting of Vehicle part or full body in work shop including replacement of rusted M S sheet by using gas welding,applying two coat of synthetic enamelled paint over one coat of base primer and matching with existing surface complete all as specified and directed Only painting including painting of all army sign and marking and vehicle BA No. on Number plate.

Denting and welding of broken parts complete all as directed by the Engr-in-Charge

Replacement of rusted/ damaged seat cover complete set including repair of Damaged seats and stitching work complete all as specified and directed

Supply and fixing of foot mat for Vehicle-Tata 207 complete all as specified and directed

Supply only Floor matting best quality for TATA 207 DI/TATA XENON

Replace of Front glass/roof top rubber beading complete Make -Syndicate,ATS,TATA

Repair to Door /Window glass with rubber beading complete Make -Syndicate,ATS,TATA

Supply and fixing in repair of PVC multistranded copper single core cable 25 sqmm required for Battery

Supply and fixing in repair of Horn assembly complete including wiring connection and fixing

Repair to gear box including bush repair/repalce and greasing etc. Complete.

Repair to tank leakage if any for the fuel tank including cleaning of tank and replacement of u/S float valve assembly and fuel tank lock and key.

Reconditioning of unserviceable battery 12 volts 80AH

Supply and fixing in repair of brass battery terminal complete

(B) Eicher 10.70/10.75 Servicing and Repair/Maintenance of Vehicles- Eicher 10.70/10.75 each two times at interval of 2 & half months comprising checking and repair/replacement of unserviceable spares of engine ,self starter , gear box FIP (Fuel Injector Pump), shaft,shocker and suspension system ,braking system inlcuding brake shoe ,Radiator cleaning, replacement of all type of filters and greasing of all wheels, Wheel alignment and wheel balancing by computerized Machine including tyre rotation etc of Vehicles including dismantling / Replacing of defective parts with new parts at workshop complete all as specified and directed by Engr in charge Note :-1. Spare parts shall be measured and paid separatly under relevant items here in after as "SUPPLY ONLY" but fixing of the same deemed to be included in unit rate. 2.Engine Oil will be supplied free of cost by the department but topping and refiling will be done by the contractor. 3 Brake oil, gear oil and coolant shall be measured and paid separatley . 4 Servicing of vehicle shall be carried out at authorised workshop only. 5.Other minor consumable items like nut bolts washer , cotton waste etc are deemed to be included in the quoted rate

Supply only Air filter ,Oil filter and Fuel filter each set of three Make - Micro ,bosh

Supply only Brake oil

Supply only Gear oil

Supply only Coolant

Supply only Clutch and pressure plate set , including clutch cylinder , Clutch bearing complete Make -C K or eqlt

Supply only Head light assembly complete with Bulb and connection complete . Make - Autopal, Helonix,Lumax

Supply only Head light bulb Helogen 12 volt 60 watt Make - Autopal,Helonix

Supply only Break/ Back light Assy Make - Autopal, K K

Supply only Indicator Assy Make - Autopal, K K

Supply only Fog lamp

Supply only Wipper Assy with blade complete make -Syndicate,Champion etc

Supply only Wipper blade

Supply only odometer

Replace of Front glass/roof top rubber beading as per existing complete

Repair to Door /Window glass with replacement of rubber beading as per existing complete

Supply only Door Lock assembly Make -Syndicate,ATS

Supply only Water pump assembly

Supply only Side looking mirror of side doors of best quality

Supply only Mud pad of best quality

Supply only Coolant bottle with pipe

Supply only Fan v belt Make -Fenner

Denting and Painting of Vehicle part or full body in work shop including replacement of rusted M S sheet by using gas welding,applying two coat of synthetic enamelled paint over one coat of base primer and matching with existing surface complete all as specified and directed Only painting including painting of all army sign and marking and vehicle BA No. on Number plate.

Denting and welding of broken parts complete all as directed by the Engr-in-Charge

Replacement of rusted/ damaged cloth seat/seat cover including stitching complete all as specified and directed

Supply only Floor matting best quality for Eicher 10.70/10.75

Supply and fixing of foot mat of size 600x300 mm

M & L for rewinding of self starter of Vehicles with super enamelled insulating copper wire of existing gauge , insulating materials including assembling and testing complete all as specified and directed by Opening and dismantling of self starter, and replacing with following items. (a) Carbon brushes -01 Set (b) Solenoid Switch -01 No (c) bendix -01 No (d) Fly wheel -01 No (as per sample).

M & L for repair of alternator including repair/replace of rectifier assembly and repair/replace of rotor assembly complete all as specified and as directed

M & L for repair of suspension system by Dismantling front wheel and wheel joint upper and Lower of suspension system,leaf springs, reassembling and testing after repair including replacement of following items:- (a) Suspension Kit -01 Kit, (b) Lower arm bush -08 Nos. (c) Upper arm bush -04 Nos. (d) Wheel joint upper -02 Nos. (e) Wheel joint lower -02 Nos. (f) Coil spring pad -02 Nos. (g) Tie rod end -04 Nos. (h) Upper arm bolt -02 Nos. (j) Kamani bush front -01 No. (k) Penion bearing -02 Nos. (l) Penion -01 No. (m) UJ Cross -01 No. testing complete all as specified and directed

Repair of Wheels and braking system including servicing and testing of master and slave cylinder by Dismantling front and rear wheels, Hub greasing, brake work including replacing the following items:- (a) Brake pad front wheel -04 Nos. (b) Rear wheel brake shoes -08 Nos. (c) Wheel bearing inner -02 Nos. (d) Wheel bearing outer -02 Nos. (e) Wheel cylinder kit -01 No. (f) Brake plate assly -01 No. (g) Brake pad assembly -04 Nos.(h) Brake lining-01 No

M & L for repair of Master cylinder complete

Repair of fuel pump and testing on testing bench reassembling after repair and replacing with following items:- (a) Valve lifter -01 No (b) Spring -01 No and other items as required

Opening steering assembly, removing stearing rack, lathe work, facing, ramming including replacing the following items:- (a) Centre pin bush -02 Nos. (b) Centre bearing assly -01 No. (c) Link rod repair kit, (d) Check nut -02 No. (e) Lower stearing oil -01 Ltr.

Supply and fixing of PVC multistranded copper single core cable 25 sqmm required for Battery

Repair of puncture of tube inner complete all as specified and directed

Repair to gear box including bush repair/repalce and greesing etc. Complete.

Repair to tank leakage if any for the fuel tank including cleaning of tank and replacement of u/S float valve assembly and fuel tank lock and key.

Reconditioning of unserviceable battery 12 volts 80AH

Supply and fixing in repair of brass battery terminal complete

C Staff Car Ambassdor Servicing and Repair/Maintenance of Vehicles- Ambassdor car Make- Hindustan each two times at interval of 2 & half months comprising checking and repair/replacement of unserviceable spares of engine ,self starter , gear box FIP (Fuel Injector Pump), shaft,shocker and suspension system ,braking system inlcuding brake shoe ,Radiator cleaning, replacement of all type of filters and greasing of all wheels, Wheel alignment and wheel balancing by computerized Machine including tyre rotation etc of Vehicles including dismantling / Replacing of defective parts with new parts at workshop complete all as specified and directed by Engr in charge Note :-1. Spare parts shall be measured and paid separatly under relevant items here in after as "SUPPLY ONLY" but fixing of the same deemed to be included in unit rate. 2.Engine Oil will be supplied free of cost by the department but topping and refiling will be done by the contractor. 3 Brake oil, gear oil and coolant shall be measured and paid separatley . 4 Servicing of vehicle shall be carried out at authorised workshop only. 5.Other minor consumable items like nut bolts washer , cotton waste etc are deemed to be included in the quoted rate

Supply only Air filter ,Oil filter and Fuel filter each set of three Make - Micro ,bosh

Supply only Coolant

Supply only Brake oil

Supply only Gear oil (Castrol)

Supply only Car polish 200gm

Supply only Glow Plug

Supply only Engine main seal rear

Supply only Gear box seal front

Supply only Gear sim

Supply only Gear box packing kit

Supply only Tapped cover gas kit

Supply only Fan belt (Fenner)

Supply only Fuel pipe set

Supply only Fuel pipe clip

Labour charge for dismantling engine complete chassis and replacement of main seal and dismantling gear box and replacement of gear box seal and other u/s part .( NOTE :- Parts will be measured and paid as SUPPLY ONLY")

Supply only Radiator cleaning fluid bottle

Supply only Coolant bottle with pipe

Supply only Silencer packing

Supply only Silencer belt (TVS)

Supply only Distributor paint & condenser kit (Lucus)

Supply only Float pin

Supply only Dyframe spring (carburetor)

Supply only Carburetor packing kit

Supply only Rocker

Supply only Rocker bolt

Supply only Quarter glass lock wet

Supply only Steering cover

M & L for rewinding of self starter of Vehicles with super enamelled insulating copper wire of existing gauge , insulating materials including assembling and testing complete all as specified and directed by Opening and dismantling of self starter, and replacing with following items. (a) Carbon brushes -01 Set (b) Solenoid Switch -01 No (c) bendix -01 No (d) Fly wheel -01 No (as per sample).

M & L for repair of suspension system by Dismantling front wheel and wheel joint upper and Lower of suspension system,leaf springs, reassembling and testing after repair including replacement of following items:- (a) Suspension Kit -01 Kit, (b) Lower arm bush -08 Nos. (c) Upper arm bush -04 Nos. (d) Wheel joint upper -02 Nos. (e) Wheel joint lower -02 Nos. (f) Coil spring pad -02 Nos. (g) Tie rod end -04 Nos. (h) Upper arm bolt -02 Nos. (j) Kamani bush front -01 No. (k) Penion bearing -02 Nos. (l) Penion -01 No. (m) UJ Cross -01 No. testing complete all as specified and directed

Repair of Wheels and braking system including servicing and testing of master and slave cylinder by Dismantling front and rear wheels, greasing, brake work including replacing the following items:- (a) Brake pad front wheel -04 Nos. (b) Rear wheel brake shoes -08 Nos. (c) Wheel bearing inner -02 Nos. (d) Wheel bearing outer -02 Nos. (e) Wheel cylinder kit -01 No. (f) Brake plate assly -01 No. (g) Brake pad assembly -04 Nos.(h) Brake lining-01 No

M & L for repair of Master cylinder complete

Repair of fuel pump and testing on testing bench reassembling after repair and replacing with following items:- (a) Valve lifter -01 No (b) Spring -01 No and other items as required

Opening steering assembly, removing stearing rack, lathe work, facing, ramming including replacing the following items:- (a) Centre pin bush -02 Nos. (b) Centre bearing assly -01 No. (c) Link rod repair kit, (d) Check nut -02 No. (e) Lower stearing oil -01 Ltr.

Supply only Velvet best quality

Supply only Markeen cloth

Supply only Banyan Foam

Supply only Foam sheet ½ 32 density size 3x6

Supply only Foam sheet 2” 32 density size 3x6

Supply only Floor matting best quality

Supply and fixing of foot mat of size 600x300 mm

G Motor Cycle Royal Enfield 350 CC/Hero Servicing and Repair/Maintenance of Vehicles- Motor cycle Royal Enfield 350 CC two times at interval of 2 & half months comprising checking and repair/replacement of unserviceable spares of engine, gear box, FIP(Fuel Injector Pump), suspension system ,braking system , Chain and chain cover, Kick Assembly, replacement of filters and greasing of all wheels, of Vehicles including dismantling / Replacing of defective parts with new parts at work shop complete all as specified and directed by Engr in charge Note :-1. Spare parts shall be measured and paid separatly under relevant items here in after as "SUPPLY ONLY" but fixing of the same deemed to be included in unit rate.. 2.Engine Oil will be supplied free of cost by the department but topping and refiling will be done by the contractor. 3 Brake oil, gear oil shall be measured and paid separatley . 4 Servicing of vehicle shall be carried out at authorised workshop only. 5.Other minor consumable items like nut bolts washer , cotton waste etc are deemed to be included in the quoted rate

Ditto all per item no 251 above but for Motor cycle -Hero

Supply only Brake shoe

Supply only Clutch plate

Supply only Brake cable

Supply only Speedometer assembly

Supply only Horn assembly

Supply only Speedometer Cable

Supply only Back light assembly

lock and key of fuel tank Notes:- (a) All the old retrived material obtained from demolition of vehicle will be the department property and the same will be depsoited to MT store yard. (b) All above vehicle shall be tested by the contractor Rep and their functionality shall be ensured on daily basis before going on duty at 8:30 AM on each working day at MT yard in presence of MES Rep/Engineer-in-charge and by the contractor rep. In case of failure on the part of the contractor to do so Penal recovery of Rs 500/- per day per vehicle shall be made from the contractors dues. (c) All defective parts shall be replaced by contractor within 48 hrs in above listed vehicle if any breakdown/offroad condition of vehicle. In case of failure on the part of contractor to do so a panel recovery of Rs. 1000/- per day per vehicle shall be made from the contractor dues. (d) The contractor must submit the purchase voucher of the spares parts and test and repair report from the authorised service station/ authorised workshop after repair of vehicle.

sunder and company

SONI ENTERPRISES

Baba Amarnath Enterprises

D K THUKRAL AND SONS

prabhave traders