Construction of Veternary Dispensary building at Suchaini tehsil Bhuntar district Kullu

Amount

Cutting in earth work in all kinds soil such as pick work, jumper work and blasting work in soft and hard rock, saturated soil and its intermediate classification of soil, chieseling/wedging out of rock (where blasting is prohibited) and pumping or bailing out watering/dewatering upto any lift, clearance of jungle including uprooting of vegetation, grass, bushes, wood trees and scrabbling of grith up to any height and depth, removal of rubbish and unserviceable materials. Any loss to the public and private property during the course of execution shall be the absolute responsibility of the contractor, which shall have to be duly compensated by him in all respect. with in all leads and lift of materials and other incidentals and as per direction of Engineer-in-charge.

Excavation in earth work all kinds of soils and disposal of all excavated earth up to any leads such as pick work, jumper work and blasting work in soft and hard rock, conglomrate rock or saturated soil and its intermediate classification of soil including chieseling/wedging out of rock (where blasting is prohibited) and pumping or bailing out watering/dewatering upto any lift and disposal of all excavated earth up to all leads,lifts and other incidentals and as per directed by Engineer-in-charge.

Excavation in foundations, trenches etc. in earth work in all kinds of soil such as pick jumper work, blasting work and hard blasting work saturated soil including chiselling where blasting is not possible or any other mixed variety of soil dewatering and removal of slush and other incidentials lift upto any height stacking the excavated soil upto any lead from the edge of excavation and then returning the stacked soil in 15cm (fifteen centimetre) thick layer when required into plinths sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of al surplus excavated earth with in all leads and lift and carriage of materials in all respect and as per direction of Engineer-in-charge.

Excavation in earth work in all kinds of soil such as pick jumper work upto any lead from the edge of excavation and then returning the stacked soil in 15cm (fifteen centimetre) thick layer into plinths sides of foundations etc. consolidating each deposited layer by ramming and watering with in all leads and lift and carriage of materials in all respect and as per direction of Engineer-in-charge.

Providing and laying cement concrete 1:6:12 (one cement:six sand : twelve graded stone aggregate 40 mm (forty milimetre nominal size) and curing complete excluding cost of centring and shuttering in: Foundation and plinth:including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement :six sand : twelve graded stone aggregate 20mm (twenty milimetre nominal size) at plinth level in Cement Mortar 1:6 (one cement:six sand) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Stone filling behind retaining walls/ breast walls and under floor including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Brick work using common burnt clay building bricks in super structure above plinth level up to all level in Cement Mortar 1:6 (one Cement : six Sand) Second Class Bricks including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing form work with steel plates 3.15mm. (Three point fifteen milimetre) thick welded with angle iron in frame 30x30x5mm.(thirty into thirty into five milimetre) so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs.(four metre) and removal of the same for insitu-reinforced concrete & plain concrete work in: (a) Flat surfaces such as soffits of suspended floors, roofs, landings and the like. Floors etc.upto 200 mm (two hundred milimetre) in thickness including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers,bressumers and lintels not exceeding 1 Mtr. (one metre) in depth in all heights from floor.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Edges of slabs and breaks in floors and walls: under 20 cm. (twenty centimetre) wide including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying cement concrete work 1:2:4 (one Cement: two Sand:four graded stone aggregate 20 mm (twenty milimetre nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in :Suspended Floor roofs, landing and shelves and their support balconies,beams, girders, bressumers and contilever upto all floor level including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing mild steel/Tor steel reinforcement for R.C.C. (rainforced cement concrete) work including bending, binding and placing in position complete upto all floor level .Tor Steel including cost of binding wire including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing wood work in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position.Second class Deodar wood including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 12 mm thick(twelve milimetre) prelaminated board both side bwp phenol bonded exterior/interior grade analled shutters with frame of first class deodar wood for doors including bright finished/black enamelled iron butt hinges with necessary screws 40 mm (forty milimetre ) thick frame including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows including black enamelled iron butt hinges with necessary screws. 40 mm (forty milimetre) thick second class deodar wood with including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing 40x3 mm (forty into three milimetre) flat iron hold fast 40cm.(forty centimetre) Long including fixing to frame with 10mm (ten milimetre) diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm. (thirty into ten into fifteen centimetre) 1:3:6 ( one cement : three sand: six graded stone aggregate 20mm(twenty milimetre) nominal size) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws complete . Plain grill including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete. (i) 300x16mm (three hundred into sixteen milimetre) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete (i) 250x10mm (two hundred fifty into ten milimetre) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete 150x10mm (one hundred fifty into ten milimetre) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete.125 mm (one hundred twenty five milimetre) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete 100 mm (one hundred milimetre) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Filling in plinth with sand under floors including watering ,ramming, consolidating and dressing complete including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying precast terrazzo tiles hydraulic compressed 20 mm (twenty milimetre )thick with marble chips of specified sizes laid in floors, treads of steps and landings on a bed of 25 mm (twenty milimetre )average thickness of cemen tmortar 1:6 (1 cement :6 sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles incliding rubbing and polishing complete with tiles of medium shade up to all level including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge

Providing and laying White glazed tiles 6 mm (six milimetre) thick in skirting risers of steps and dado 12 mm (twelve milimetre) thick cement mortar 1:3 (one cement :three sand) and jointed with cement slurry up to all level including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge

15mm (fifteen milimetre) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm (eighty milimetre) in girth and finished even and smooth. Cement mortar 1:6 (one cement:six sand) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Distempering with dry distemper of approved brand and manufacture(Two coats)and of required shade on undecorated wall surface to given an even shade over and including primer coat of whiting after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

For distempering with dry distemper on ceilling and for sloped roofs. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting.Readymixed paint brushing with wood primer pink. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Painting two coats (excluding priming coat)on new wood and wood based surfaces,with readymixed paint,brushing to give an even shade including cleaning of all dirt,dust and other foreign matter sand papering and stopping:-- With white paint including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing under layer for plinth protection of 75mm (seventy five milimetre) thick (unconsolidated) bed dry brick/stone aggregated 40mm (forty milimetre) nominal size with rammed and consolidated and grouted with fine sand including preparation of ground. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm (twenty milimetre nominal size) including preparation of ground. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall.15x22 cm (fifteen into twenty two centimetre) in cement mortar 1:6 (one Cement : six Sand) and inside plastring with cement plaster 1:3 (one Cement:three Sand) including earth work and laying 10 cm (ten centimetre cement concrete in 1:5:10 (one Cement : five Sand : ten graded stone aggregate) of 40 mm (forty milimetre nominal size) and 7.5 cm (seven point five centimetre) cement concrete 1:2:4 (one Cement : two Sand : four Graded stone aggregate of 20 mm (twenty milimetre nominal size) and finished with a floating coat of neat cement complete as per standard design including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 0.60mm (zero point sixty milimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six milimetre) dia metre with prepainted limpet and rubber washers complete with all accesoriees as required including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing ridges or hips 60 cm (sixty centimetre) overall with 0.60mm (zero point sixty milimetre) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 microns primer coating + back coat of polyster of 5 (five) microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm (six milimetre) dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 15 cm.(fifteen centimetre) wide 45 cm.(forty five centimetre) overall semicircular plain G.I. sheetgutter with iron brackets 40x3mm (forty in to three milimetre) size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design. 0.63mm (zero point sixty three milimetre) thick sheet. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint. In beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing partical board ceiling of approved quality with butt jointing and nail (frame work and cover fillets to be paid for separately. Particle board (bwp phenol bonded exterior/interior grade) 8 mm (eight milimetre) thick. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing M.S. BP Sheet 1.66mm to 2mm (one point sixty six milimetre to two milimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete (Base members of steel work shall be measured & paid separtely) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing to wall ceilling and floor galvanized mild steel tubes (medium grade) tube fitting and clanps including making good the wall ceilling and floor (a) 15 mm (fifteen milimetre) nominal bore.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

20 mm (twenty milimetre) nominal bore including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Making connection of galvanized steel distritution branch with galvanised mild steel main 20 mm (twenty milimetre) to 40 mm (forty milimetre) nominal bore by providing and fixing tee including cutting and threading the pipes complete. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing PVC water storage tank of ISI : 12701 marked G.I inlet and outlet connection, 15 mm (fifteen milimetre) nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hositing up to all heights above ground level. 1000 litre (one thousand litre) net capacity tank.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing vitreous China wash down, water closet squatting pan (Indian Type W.C Pan) size 580 mm (five hundred eighty milimetre) (Earth work bed concrete, foot rest and trap to be measured and paid for separately. Orissa pattern. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 100 mm 'P' or 'S' trap for water closet (squatting pan) ISI marked, inclding jointing the trap with the pan and PVC pipe with approved adhesive etc complete. 110 mm (one hundred ten milimetre) dia. including carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 10/12.50/15 litres (ten/ twelve point fifty/ fifteen litre) vitreous China low level flushing cistern with a pair of C.I or mild steel brackets, complete with fitting such as lead valve less syphon, 15 mm (fifteen milimetre) nominal size brass ball valve. With polythene float, C.P brass handle, unions and couplings for connection with inlet, outlet and overflow pipes. 40mm (forty milimetre) dia C.P flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) including carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing in position brass mosquito proof coupling for over flow pipe of 25 mm (twenty five milimetre) nominal dia (over flow pipe to be measured and paid for separately.)including carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I or M.S brackets painted white including cutting holes and making good the same but excluding fittings. 550m x 400mm. (five hundred fifty milimetre x four hundred milimetre) including carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing C.P brass waste for wash basin and sink 32 mm (thirty two milimetre) dia.including carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing M.I Union for wash basin or sink. 32 mm (thirty two milimtre) dia. including carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing C.P brass S, Trap for wash basin and sink. 32 mm (thirty two milimetre) dia including carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing angle valve 15 mm (fifteen milimetre) with out nut and pipe. including carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing C.P brass bib tap with capstern head 15 mm (fifteen milimetre) dia. including carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing sand cast/ iron grating for gully flur or Nahani trap. including carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 600mm x450mm (six hundred milimetre into four hundred fifty milimetre) bevelled edge mirror of superior glass mounted on 6 mm (six milimetre ) thick A.C sheet or ply wood sheet and fixed to wooden plugs with C.P brass secreen. including carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing C.P brass towel rail complete wall C.P brass brackets fixed to wooden plugs with C.P brass secreen 600mm x20mm. (six hundred milimetre into twenty milimetre) including carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 600mm x 120 mm (six hundred milimetre into one hundred twenty milimetre) glass shlf with C.P brass bracket and guard rail complete, fixed to wooden plugs with C.P Brass screws. including carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing C.P Brass pillar tap with Capstan Head.15 mm (fifteen milimetre) dia. including carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing Brass full way valve with wheel. 15 mm (fifteen milimetre) nominal bore.including carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

20 mm (twenty milimetre) nominal bore.including carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing high pressure PVC spigot and socket waste pipe and vantilating pipe 35.1 marked including fixing with approved adhasive complete. (a) 110 mm (one hundred milimetre) dia including carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

90 mm (ninety milimetre) dia. including carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete. 110 mm (one hundred ten milimetre) dia. including carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

75 mm (seventy five milimetre) dia.including carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing PVC floor trap ISI marked of self clearing design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm x 90 mm (one hundred ten milimetre into ninety milimetre) including carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Constructing circular type manhole 1.40 metre (one point forty metre) internal diameter with R.C.C top slab in 1:2:4 (one cement: two sand: four graded stone aggregate 20 mm (twenty milimetre) nominal size foundation concrete 1:4:8 (one cement : four sand: eight graded stone aggregate 40 mm nominal size) inside plastering 15 mm (fifteen milimetre) thick with cement mortar 1:3 (one cement: three sand), finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement: two sand: four graded stone aggregate 20mm nominal size) fninished smooth complete including curing and testing. (i) 2.50 (two point fifty) metre dep with C.I Cover and frame(medum duty) 500 mm internal diametre, total weight of cover and frame to be not less than 116 kg. (one hundred sixteen kilo gramme) (Weight of cover 58 kg. (fifty eight kilogramme) and weight of frame 58 kg. )including carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Himraj