Comprehensive Operation, Preventive Maintenance & Repairs of Civil Structures, various type of pipeline, various type of valves, storage structures, pumping machineries and electrical equipment etc. located at different head works and sub headwork sites including supply of potable water to all the hamlets/villages/cities for 30 months period. District .Morbi

NAME OF WORK: Comprehensive Operation and Maintenance of the project mainly Water

Treatment Plant, different class, type and diameter pipes, pump houses, Sumps, RCC ESR,

H.G.L.R, Sluice valves, Flow meters, Non-return valve, Pump, motor, capacitor, L.T. Panels, L.T.

cables and transformer installed at Headwork and Sub headwork. Work includes replacement of

spares for all equipment and maintenance of all civil structures and all electro-mechanical

installation etc. complete. Including submission of periodic MIS reports on software. Supply of

potable water in accordance, maintaining residual chlorine, and all consumables. All type

operations, preventive maintenance, overhauls and repair/ break down maintenance for

civil/mechanical & electrical works. Providing prescribed nos. of qualified and experienced staff

for overall management of O&M work as per detailed specification & obligatory requirement for

2.5 year. Excluding electric power, raw water cost, chlorine, PAC and bleaching powder under

NCD-4 RWSS(Gr.9,10,11) of Tal.- Halvad, Dist.- Morbi as per tender.

ESTIMATED COST: RS.53178788.16

Gujarat Water Supply & Sewerage Board

Zone – 3, Rajkot

THIS PAGE IS LEFT INTENTIONALLY BLANK

SR. NO. PARTICULARS

THIS PAGE IS LEFT INTENTIONALLY BLANK.

Schedule showing approximate quantity of materials to be supplied to the contractor at the govt. store

for the work to be executed on contract and the rate which they are to be charged.

Sr. Particular Quantity Issue Rate Unit Place of

1 Chlorine gas Free of cost Department's

2 PAC (10% liquid) Free of cost store anywhere in

3 Bleaching powder Free of cost Morbi District

1. Materials not included in “Schedule – A” but required for the work shall be provided by the

contractor at his own cost.

2. Any materials required for items other than labour charges items mentioned in “Schedule – B” and

materials not included in “Schedule – A” but available with dept. will be issued on request of the

contractor at departmental issued rate or market rate whichever is more.

3. The contractor shall provide his own arrangement for loading, unloading and transporting the

materials issued by the dept. from store to site at his own cost. Contractor will be responsible for

damages whatsoever during transfer.

4. The unused materials issued by the department for this work shall be returned to the department

in good and acceptable condition by the contractors. Any such unused materials not returned by

the contractor in time or issued will be recovered at Double of (As per issue rate + 3% storage

charge or Board RC + 3% storage charges) whichever is more.

5. All materials such as Specials, Fittings, Spares,etc. shall bebrought by Agency / Contractor at site

6. GWSSB will provide chlorine gas at the site of chlorine dosing.

7. The material which requires to be procured by contractor and same as available with the

department the same can be issued to the contractor after prior approval from the competent

authority and charged for the same will be at the current market rate or issue rate fixed by the

department whichever is higher. The contractor shall have to deposit total cost of materials

issued or shall be recovered from the running account bill.

8. The materials issued for the above work shall be used in the above O&M work only. If any of

materials issued for this work and found used in other works shall be charged at the double rate.

9. As per the instructions of the competent authority and availability of materials, if needed contractor

have to transport the same from the other store to ………Scheme for which no extra carting,

loading, unloading will be paid.

10. The materials issued free of cost to the contractor is to be transported to the site of work in good

condition by the contractor for which no extra payment will be made.

11. The materials to be brought/purchase by the contractor shall be got approval from the EIC before

using in the work.

Signature of the contractor Executive Engineer

P. H. Works Division

NAME OF WORK: Comprehensive Operation and Maintenance of the project mainly Water

Treatment Plant, different class, type and diameter pipes, pump houses, Sumps, RCC ESR,

H.G.L.R, Sluice valves, Flow meters, Non-return valve, Pump, motor, capacitor, L.T. Panels, L.T.

cables and transformer installed at Headwork and Sub headwork. Work includes replacement of

spares for all equipment and maintenance of all civil structures and all electro-mechanical

installation etc. complete. Including submission of periodic MIS reports on software. Supply of

potable water in accordance, maintaining residual chlorine, and all consumables. All type

operations, preventive maintenance, overhauls and repair/ break down maintenance for

civil/mechanical & electrical works. Providing prescribed nos. of qualified and experienced staff

for overall management of O&M work as per detailed specification & obligatory requirement for

2.5 year. Excluding electric power, raw water cost, chlorine, PAC and bleaching powder under

NCD-4 RWSS(Gr.9,10,11) of Tal.- Halvad, Dist.- Morbi as per tender.

Amount up to 2 decimals

Part Description

Comprehencive Operation, maintenance and repairing of Water

Supply Scheme in all respect i.e., all the components executed under

the project mainly Pumping machinary/WTP/SUMP/ESR/ Pipelines /

civil structures / head works / Sub head works etc. including

establishment charges and all equipments / materials / labour for

repairing of pipeline and other civil works including water analysis

charges etc comp. As per detailed specification & obligatory

requirement for 30 months including supply of clear water to each

Head works, Sub-Head works & 15 villages / 6 hamlets/1 city including

satisfactory maintaining the record for the same, but excluding electric

power and raw water, supply of chemicals such as alum, chlorine gas

etc. under NCD-4 RWSS (Gr.9,10,11) of Tal-Halvad,Dist-Morbi as per

Maintenance activities, measured and paid separately, such as

painting, cleaning of reservoirs/ tanks, procurement and replacement

of filter media etc complete as per this tender document

C Repair, upgradation of non-functional assets which are crucial for safe

and efficient functioning of RWSS

Total Amount (A+B+C)

Total Amount (A+B+C)

Total of Schedule B in Rupees Five Crore Thirty one Lacs Seventy eight thousand Seven hundred

Eighty eight Only.

I / We am / are willing to carry out the work at_________ % above / below percent (should be

written in figure and words) of the estimated rates mentioned above amount of my / our tender

works out as under.

Estimated amount Put to tender: Rs. Estimated amount Put to tender: Rs.

Deduct ______ % above Rs. ____________ Add ______ % above Rs.

In words Rupees __________________________ In words Rupees __________________________

 Rates to be quoted exclusive of GST.

 Part A is payable on monthly basis whereas part B & C are subject to completion of activities

and approval of the measurement.

 Water supply of target quantity of water to all habitations (village, towns and hamlets)on a

daily basis. If due to breakdown, agency is not capable of supplying water then such quantity

should be supplied the next day to cope up with the shortage. Such that the water supplied on

the next day will be 2 times the regular per day target.

 Contractor should quote rate in words & figure both.

 Insurance Policy should be procured in favour of Executive Engineer, PH Works Division,

Morbi, and contractor has to produce it before entering into agreement with department, for

the full period of O&M.

 The bidders should strictly note that rate will be fixed and firm. No escalation will be given

during the maintenance period.

 The work should be carried out as per the terms and conditions laid down in the tender

 The cost of raw water, electricity will be borne by GWSSB.

 GWSSB will supply necessary stock of Chlorine gas, PAC & bleaching powder. All other

required material for O&M work shall be brought by the contractor at his own cost including

loading, unloading and carting and the same material shall get approval from the Engineer-in-

charge before use in the work.

 The cost is including all type of taxes (other than GST), octroi, freight, loading, unloading,

carting labour charges payment to labour including insurance, P.F. and all other liabilities for

the staff engaged for the O&M work.

 All replaced material (provided from the department’s store) shall be returned to department

store by the contractor at his own cost.

 Painting of overall structures:Internal/external painting of civil structures, machineries,

manifolds, valves etc. (as per Part-B)

Interior Paint: Distemper paint to all civil assets (as per Part-B)

Exterior paint: shall be acrylic emulsion paint colour (like APEX): pump house, treatment

plants, treated water pumping stations, GSRs, ESRs, sump, stores, etc all.(as per Part-B)

Oil paint colour: All type of doors, windows, ventilation, shutter, pump, motor, all valves &

equipment inside pump house, transformer yard, D.P. structure, transformer etc

Black Japan colour: air valve, sluice valve, riser pipe of air valve, zero velocity valve, butterfly

valve (outdoor), bypass arrangement etc.

Signature of the contractor Executive Engineer

P. H. Works Division

Breakup of Schedule B

Part A: Operation & Maintenance

Qty. Unit Item Rate (in Rs.) Per Amount in

Comprehencive Operation, maintenance and

repairing of Water Supply Scheme in all respect

i.e., all the components executed under the

project mainly Pumping

machinary/WTP/SUMP/ESR/ Pipelines / civil

structures / head works / Sub head works etc.

including establishment charges and all

equipments / materials / labour for repairing of

pipeline and other civil works including water

A analysis charges etc comp. As per detailed

specification & obligatory requirement for

months including supply of clear water to each

Head works, Sub-Head works & 15 villages /

hamlets/1 city including satisfactory maintaining

the record for the same, but excluding electric

power and raw water, supply of chemicals such

as alum, chlorine gas etc. under NCD-4 RWSS

(Gr.9,10,11) of Tal-Halvad,Dist-Morbi as per

i 12 Months First Year

ii 12 Months Second Year

iii 6 Months Third Year

Total for Part A in. Rupees Four Crore Fifty three lac Two thousand Three Hundred Twenty five Only

Part B- Maintenance (separately payable on actuals, as measured)

Qty. Unit Item Per Amount in

Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on

undecorated wall surface to give an even

B1 shade including throughly brushing the surface

(i) free from mortar droppings and other foreign

matter and sand papered smooth. (Only ESR)

Halvad HW ESR(10 lac lit) & Bhalgamda HW

ESR (8 lac lit)

B1 8466.00 Sq.Mt. Wall painting (two coats) with plastic emulsion 87.51 Sq.Mt.

Qty. Unit Item Per Amount in

(ii) paint of approved brand and manufacture on

undecorated wall surface to give an even

shade including throughly brushing the surface

free from mortar droppings and other foreign

matter and sand papered smooth. (Only Sump

& Compound wall)

Khetavav sump(10 lac lit), Khetavav sump(5

lac lit), Sara Sump(10 lac lit), Khetardi sump(5

lac lit), Bhalgamda Sump(15 lac lit)

Oil paint colour: Painting two coat on steel

work or wood work with synthetic enamel paint

60.00 Sq.Mt. including necessary papering and cleaning te 68.74 Sq.Mt.

surface etc. complete.

Halvad HW, Sara SHW, Khetavav SHW Door

Sub Total- Part B1 1 time in 2.5 years Total Rs..

Cleaning of Storage reservoir: UG sumps,

B2 ESR, HGLR/ GLCC and all village level sumps

(i) every six months (5 times in the contract

Sump 4.0 ML at Halvad HW

Sump 1.0 ML at Khetavav SHW

Sump 0.5 ML at Khetavav SHW

Sump 1.5 ML at Bhalgamda HW

Sump 1.0 ML at Sara SHW

Sump 0.5 ML at Khetardi SHW

Sump 0.26 ML at Velala boosting station

Sump 0.55 ML at Liya boosting station

5.0 Sump 0.07 ML at Vegadvav boosting No.

5.0 Sump 0.35 ML at Malaniyad boosting No.

Sump 0.29 ML at Devaliya boosting station

Cleaning of RCC ESR including cleaning and

removing algae, calcinations, sludge, dirt

deposition from bottom and as well as from

wall of container, disinfection by bleaching

powder with all necessary scafolding, tools and

plants, labours and cost of disinfectant etc

complete(10 times in the contract period)

Qty. Unit Item Per Amount in

ESR 1.0 ML at Halvad HW

ESR 0.80 ML at Bhalgamda HW

Sub Total- Part B2 (For Every Six Month) For 5 time cleaning in 2.5 Year Total Rs.

Providing & Supplying the filter sand of

specified effective size (0.45 to 0.70 mm) and

uniformity coefficient( not more than 1.7, nor

less than 1.3) and laying over gravel support

conforming to IS: 8491 (1) - 77 in filter bed of

required depth as per design and drawing.

Inclusive of all lead.

Sub Total- Part B3: 4 time in 2.5 years Total Rs..

Total- Part B (B1+B2+B3)

Total for Part B in. Rupees Twenty seven Lacs Sixty five thousand Four hundred forty Only

Part C- Upgradation or Repair of non-functional legacy assets

Qty. Unit Item Per Amount in

Item No.1: -Providing C.C.M.:100 for encasing

pipes using trap metal size 12 mm to 50 mm

incl. form work curing consolidation etc.

45.00 Cum. complete. 4113.80 Cum.

Using trap metal 20mm nominal size

location: at Various place & various pipeline

Item No.6: -Labour charges for repairing leakage

in CI/DI pipeline of following diameter at different

places including necessary excavation manually

or by machinery, removing of mud, dewatering,

cleaning of pipe, cutting of pipe, Jointing &

50.00 No. repairing using CID joints including CID joints, 5686.00 No.

rubber rings, nut bolts, hiring excavator, Hydra/

Crane, dewatering machine, fuel, operator etc

complete (including cost of jointing material but

excluding cost of pipe)

For 300 mm dia. DI k-7 pipeline of merupar

Qty. Unit Item Per Amount in

Description of Items Rate

Item Labou Amount

Qty. Unit r 10%

No. Supply (Rs.)

General servicing and overhauling of MCC Panel

with three feeder of 150 kw (all 3 working

1 feeder)and 3 feeder of 75 KW(all 3 working

feeder)Make: Industrial control) including following

(A)SITC of cooling fan in feeder no.1(150 KW)

(Rate of cooling fan 1650 and labour rate is taken

10% of Supply Rate = 165, so Total rate is Rs

(B)SITC of cooling fan and ELR in feeder no.2(150

1.2 (Rate of cooling fan 1650 and ELR is 5780, labour 1 No. 7430 743

rate is taken 10% of Supply Rate = 743, so Total

rate is Rs 8173 .

MCC Panel outgoing feeder of 150 kw (all 3 working

feeder,Make: Industrial control)

1.3 (B)SITC of AC Ameter, Digital Type (96 x 96) with 1 No. 1616 140

inbuilt ASS for Incoming(s)/

Outgoings(s), as required. in feeder no.2(150 KW)

SITC of providing instrument Transformers

complete with accessories, associated wiring &

controls, of following type & rating

1.4 Resin Cast insulated Current Transformer, Double 3 No. 1537 200

300/5A, 5-15VA, Class 1.0 / 5P10 for metering/

protection, as applicable in feeder no.2(150 KW)

MCC Panel outgoing feeder of 150 kw (all

working feeder,Make: Industrial control)

1.5 (B)SITC of On / Off / Trip Indicating lamps(110 / 9 No. 251 122

230V AC) for MCCB controlled

Outgoing module(s). in feeder no.(150 KW)

MCC Panel outgoing feeder of 150 kw (all 3 working

feeder,Make: Industrial control)

(C ) Supply, installation, testing & commissioning of

415 V Fully automatic Microprocessor based soft

starter with built in bypass arrangement for pump

1.6 control application as per general specification as 1 No. 4772

under: Control Method -Torque Control, Input

voltage- 415 V, 3 Phase, Input frequency - 50/

Hz (± 5%), Confirmative to standard - IEC 61947-4

2UL, CSA, CE, Motor protection - inbuilt Thermal

Protection, Starter protection - SC UV, Phase

unbalance, Phase failure, EMC Std- IEC 61000-4-2

Level 3 & IEC 61000-4-3-Level-3, Built in

communication as per RS 485.(150 KW )(in Feeder

MCC Panel incoming feeder,Make: Industrial

1.7 (D) SITC of R, Y & B Phase Indicating Lamps (63.5 1 No. 466 122

/ 110 / 230 V AC) for Incoming module(s) in

In MCC Panel with Three outgoing feeder of 75 kw

(all working feeder,Make: Industrial control)

1.8 (A) SITC of ELR in feeder no.1(75 KW) 1 No. 5780 578

(Rate of ELR is 5780, labour rate is taken 10% of

Supply Rate = 578 so Total rate is Rs 6358 .

In MCC Panel with Three outgoing feeder of 75 kw

(all working feeder,Make: Industrial control)

1.9 (A) SITC of On / Off / Trip Indicating lamps(110 / 9 no. 251 122

230V AC) for MCCB controlled

Outgoing module(s) in feeder no.(75 KW)

In MCC Panel with Three outgoing feeder of 75 kw

(all working feeder,Make: Industrial control)

(a)Supply, installation, testing & commissioning of

415 V Fully automatic Microprocessor based soft

starter with built in bypass arrangement for pump

control application as per general specification as

under: Control Method -Torque Control, Input

1.10 voltage- 415 V, 3 Phase, Input frequency - 50/ 60 1 no. 67,079 4,772

Hz (± 5%), Confirmative to standard - IEC 61947-4

2UL, CSA, CE, Motor protection - inbuilt Thermal

Protection, Starter protection - SC UV, Phase

unbalance, Phase failure, EMC Std- IEC 61000-4-2

Level 3 & IEC 61000-4-3-Level-3, Built in

communication as per RS 485.(75 KW)(feeder

Cable Tray : Supply & laying MS ladder type cable

trays with side channel of size - 75 x 15 x 15 mm /

100 x 15 x 15 mm & rungs of size - 35 x 15 x 15 mm

spaced at 250 mm apart, fabricated from 2 mm thick

sheet steel in standard length of 2.5 meter, duly

finished with one coat of red oxide & two coats of

Aluminium paint as per IS including accessories

such as coupler plates / fish plates, bends, tees,

reducers, elbows, covers and electro-galvanized

hardware etc, erected on existing support as per

specification and instruction of Engineer-in charge.

of size 150(w) X 75(H) X 2.0mm Thick

Supply at site, Storage, Erecting Istallation Testing

& commissioning of Bourdon type pressure gauge,

± 1% Accuracy, direct bottom 1/2" ,NPT(M) process

connection, IP 67, Glycerine filled SS304, Case with

Bayonet type Bezel, SS 316 L bourden tube, SS

3 316 Movement material Aluminium Dial with black 8 Nos. 1303.00 109.00

graduation on white background, Micro Zero

adjustable pointer, neoprene gasket, Blow out

disk,shatter proof glass, SS tag plate etc as per IS

3624 (150 MM Dia) (of range 0 -10 kg/cm2 with IS

General servicing and overhauling of 300 KVAR

APFCR Panel including following items

Providing&erecting capacitor duty contactor

phase, 415 V with proper connection for following

rating.(25 kVAR capacitor duty contactor AC3)

Supply, installation, testing & commissioning heavy

duty APP type capacitor unit, vacuum impregnated

with non-PCB / non toxic oil, internally delta

b connected with built in internal fuses complete with 150 259 26

discharge resistances & terminal cover, rated for

440 V AC, 3 Phase, 50 Hz as per IS: 13585 Part-1.

APP type Capacitor

(A)SITC of cooling fan in APFC panel

(Rate of cooling fan 1650 and labour rate is taken

c 10% of Supply Rate = 165, so Total rate is Rs 1815 1 No. 1650 165

Overhauling and General servicing, change

required parts and making panel in working

condition of 630 A Vacuum Circuit Breaker Panel

(Make : Crompton) including as below.

(1) SITC of DC supply battery powerpack

(2) SITC of overcurrent relay(OCR), Earth fault

5 relay(ELR),master trip Realy & other relay. 1 JOb 0

(3) SITC of Ameter and Vmeter

(4) SITC of all Indication lamp.

(5) SITC of Announciator

(6) SITC of Potencial Transformer

(For above item 30% of SITC cost is taken,SITC

servicing,overhauling,dismentaling,loading,unloadin

g,refitting of 1000KVA Transformer including

following items

(a) Routine maintenance of Transformer in

operation covering check for Insulation Resistance,

oil breakdown strength, reconditioning /replacement

of silica gel, cleaning of transformer & topping up of

oil if required. (excluding cost of transformer oil)

(b) Testing of transformer oil for dielectric

breakdown strength.

(c) Replacing old and unserviceable gasket of Top

cover plate of Transformer having following

capacity. (250 kVA)

(d) Replacing old & unserviceable gasket bushing of

HT for the following capacity Transformer (1000

(e) Replacing old & unserviceable gasket bushing of 8

LT for the following capacity Transformer (1000

(f) Outside painting of Transformer for the following

capacity (1000 kVA)

(g) Replacing the oil level glass of the 250/ 315/

500/ 750/ 1000kVA by new one

(h) Replacing the breather of the Transformer of

following capacity. (1000 kVA)

(i) Conveyance charges for transformer from

workshop to site or back one side) -Outside

Divisional Head Quarter for first 30km from store

(j) Loading/ Unloading transformer on one side

(1000kVA )-4 Job

(k) Transformer oil having good resistance to high

electrical stress,high di-electric strength(50KV) low

viscosity,low pour point,high flash point and

excellent thermal properties for efficient heat

transfer and cooling as per IS 335-1972

(l) filtration of treansformer oil as per IS for removal

of moisture,carbon,slurry etc.by means of circulating

oil through vacuum pump from heating elements

and filters to with stand the breaking strength of the

oil above 40KV beyond one minute tested in oil

testing kit (A) On site

Repairing of 600 mm dia inlet Electro-mechanical

Flowmeter(Make : E + H) including following

items(1) SITC of Display (power supply :220,

communication : RS 485, Disply: Remote with LCD

display for flow Rate & Totalizes, (2) SITC of

8 sensor Cable of required length as per site 1 job

requirement (3) replacement of flowtube(whereever

required)(4) Calibration of the flowmetersensor

Cable Rate is for 160 m is 16000, and Display is

45500, so total is 61500, labour Rate is consider

% of supply Rate, so

Supply, installation, testing & commissioning of

horizontal mono submersible pump set (Drain

pump) as per IS: 14220 / 1994 & its latest

amendments of following duty parameters with

suitable submersible motor as per IS: 9283 / 1994 &

its latest amendments working on 3 phase, 415 V ±

9 10%, 50 ± 3% Hz power supply, rated speed 2900 2 Unit 15840 0

RPM of following duty capacity. Material of

Constructions: Impeller: High tensile brass / LTB II;

Casing: CI FG 260; Pump & Motor shaft: SS 304;

Bearing Bush: LTB III including necessary piping

system etc.complete.

capacity 20 m3/hr Flow and 10 meter Head

Mains with 1.1kV grade FRLS PVC insulated ISI

marked stranded copper conductor wire in following

type of pipe to be erected in/ on wall /ceiling with

sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size. With medium class Rigid PVC pipe

and accessories a. 2 wire 4 sq.mm (with 2.5 sq.mm

Providing following type of Modular type

accessories mounted with PVC/ metallic box, single

mounting base frame covered with textured/ metallic

front plate, modules erected with necessary

connection as desired by Engineer In charge

16A single Pole Modular MCB Switch, Cat. II

Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assemble don

single MCPCB, with housing use dasa heat sink

shall be made of thick sheet Steel conforming to

IS:513 / CRCA / aluminium pressure die cast

powder coated and high U.V. & corrosion resistance

with diffuser house din aluminium casted body with

company mark/name 160 V to 270 V , Power Factor

12 more than 0.95, THD < 15 %,CCT 3000 K to 6500K, 6 Each 693.72 32.8

Luminaire efficacy> 85 lumens/watt ,LED driver

efficiency > 85 %(fitting required LM - 79 & LM -80

Certificates ) (NOTE: Below description have shown

ranges of Wattage capacity of LED fittings. The

Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Square / Circular shaped Surface / Recessed

Mount Down light with provision for spring loaded

mounting clips complete.IP20

22-24 Watts, Surge - 2KV,IP-20, 4 feet, Cat-III

Supplying and erecting LED streetlight/ Flood light

fittings with High power White LEDs wattage of

Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminium housing with

smooth finish powder coated and heat sink extruded

aluminium with diffuserand Polycarbonateoptics/

lenses with company mark /name engraved or

embossed160 to 270 V, Power Factor more than

Uniformity ratio > 0.45, Luminaire efficacy >

lumens/watt. LED driver efficiency > 85%. (fittings

required LM - 79 & LM-80 certificates) (NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings. The Engineer incharge may

select any wattage capacity between the ranges

(A) Street Light (IP-65), Surge protection - 4 KV

integraland, Light must have 440 VAC line supply

with over-voltage protection.

36-48 Watts, Surge - 2KV,IP-20, 4 feet, Cat-III

Point wiring Arrangement:

Design, supply, erection, testing and

commissioning of suitable general arrangement

of point wiring for pump house.

Point wiring for Light / Bell with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires upto 10 mtr length, in below

type of pipe erected with 6A Modular types witch

14 / bell push & accessories and earth continuity of 12 Pt. 277.16 56.58

following type, erected on PVC /Metallic

/Wooden box, single mounting base frame

covered with textured / metallic / white front

plate module serected on / in wall / ceiling as per

pipe erected, with necessary Lamp holder /

ceiling rose / H.D. Connector as directed.

(a)with medium class Rigid PVC pipe and

accessories erected flushed on wall / ceiling

Supply, testing & commissioning portable diesel

driven self priming horizontal mono dewatering

pump set with four wheel trolley, GI medium duty

15 delivery pipes, specials, suction strainer etc. 1 Unit 0

complete set Material of Constructions: Impeller:

Bronze, Casing: CI, Shaft: Carbon Steel

Capacity : 12-30 LPS,Head:6-12 meter Head

servicing,overhauling,dismentaling,loading,unloadin

g,refitting of 1000KVA Transformer including

following items

(a) Routine maintenance of Transformer in

operation covering check for Insulation Resistance,

oil breakdown strength, reconditioning /replacement

of silica gel, cleaning of transformer & topping up of

oil if required. (excluding cost of transformer oil)

(b) Testing of transformer oil for dielectric

breakdown strength.

(c) Replacing old and unserviceable gasket of Top

cover plate of Transformer having following

capacity. (250 kVA)

(d) Replacing old & unserviceable gasket bushing of

HT for the following capacity Transformer (1000

(e) Replacing old & unserviceable gasket bushing of

LT for the following capacity Transformer (1000

(f) Outside painting of Transformer for the following 13254.4

capacity (1000 kVA) 8

(g) Replacing the oil level glass of the 250/ 315/

500/ 750/ 1000kVA by new one

(h) Replacing the breather of the Transformer of

following capacity. (1000 kVA)

(i) Conveyance charges for transformer from

workshop to site or back one side) -Outside

Divisional Head Quarter for first 30km from store

(j) Loading/ Unloading transformer on one side

(1000kVA )-4 Job

(k) Transformer oil having good resistance to high

electrical stress,high di-electric strength(50KV) low

viscosity,low pour point,high flash point and

excellent thermal properties for efficient heat

transfer and cooling as per IS 335-1972

(l) filtration of treansformer oil as per IS for removal

of moisture,carbon,slurry etc.by means of circulating

oil through vacuum pump from heating elements

and filters to with stand the breaking strength of the

oil above 40KV beyond one minute tested in oil

testing kit (A) On site

Overhauling and General servicing, change

required parts and making panel in working

condition of 630 A Vacuum Circuit Breaker Panel

(Make : Crompton) including as below.

(1) SITC of DC supply battery powerpack

(2) SITC of overcurrent relay(OCR), Earth fault

2 relay(ELR),master trip Realy &other relay. 1 JOb 0

(3) SITC of Ameter and Vmeter

(4) SITC of all Indication lamp.

(5) SITC of Announciator

(6) SITC of Potencial Transformer

(For above items 30% of SITC cost is taken,SITC

General servicing and overhauling of 300 KVAR

APFCR Panel including following items

Providing&erecting capacitor duty contactor

a phase, 415 V with proper connection for following 4 Nos. 2800.71 311.19

rating.(25 kVAR capacitor duty contactor AC3)

Supply, installation, testing & commissioning heavy

duty APP type capacitor unit, vacuum impregnated

with non-PCB / non toxic oil, internally delta

b connected with built in internal fuses complete with 150 259 26

discharge resistances & terminal cover, rated for

440 V AC, 3 Phase, 50 Hz as per IS: 13585 Part-1.

APP type Capacitor

General servicing and overhauling of MCC Panel

with three feeder of 225 kw (all 3 working

feeder)Make: Industrial control) including following

MCC Panel outgoing feeder of 225 kw (all 3 working

feeder,Make: Industrial control)

a (B)SITC of AC Ameter, Digital Type (96 x 96) with 1 No. 1616 140

inbuilt ASS for Incoming(s)/

Outgoings(s), as required. in feeder no.(225 KW)

SITC of providing instrument Transformers

complete with accessories, associated wiring &

controls, of following type & rating

Resin Cast insulated Current Transformer, Double

1000/1A or 5A, 5-15VA, Class 1.0/ 5P10 for

metering/ protection, as

applicable in feeder no

MCC Panel outgoing feeder of 225 kw (all

working feeder,Make: Industrial control)

c (B)SITC of On / Off / Trip Indicating lamps(110 / 9 No. 251 122

230V AC) for MCCB controlled

Outgoing module(s). in feeder no.225 KW)

In MCC LT Panel with microprocessor softstarter

with three outgoing feeder of min. 225 kw (Make:

Industrial control)

Supply, installation, testing & commissioning of

V Fully automatic Microprocessor based soft starter

with built in bypass arrangement for pump control

application as per general specification as under:

Control Method -Torque Control, Input voltage- 415

V, 3 Phase, Input frequency - 50/ 60 Hz (± 5%),

Confirmative to standard - IEC 61947-4 2UL, CSA,

CE, Motor protection - inbuilt Thermal Protection,

Starter protection - SC UV, Phase unbalance,

Phase failure, EMC Std- IEC 61000-4-2 Level 3 &

IEC 61000-4-3-Level-3, Built in communication as

per RS 485.(225 KW )(parallel rate of 220 KW is

In MCC LT Panel with microprocessor softstarter

with three outgoing feeder of min. 225 kw (Make:

Industrial control) SITC of operating Handle and

Repairing of motor terminal box of motor of 225 KW

(lumsum rate is taken)

Supply at site, Storage, Erecting Istallation Testing

& commissioning of Bourdon type pressure gauge,

± 1% Accuracy, direct bottom 1/2" ,NPT(M) process

connection, IP 67, Glycerine filled SS304, Case with

Bayonet type Bezel, SS 316 L bourden tube, SS

6 316 Movement material Aluminium Dial with black 4 No. 1303.00 109.00

graduation on white background, Micro Zero

adjustable pointer, neoprene gasket, Blow out

disk,shatter proof glass, SS tag plate etc as per IS

3624 (150 MM Dia) (of range 0 -10 kg/cm2 with IS

Supply, installation, testing & commissioning of

horizontal mono submersible pump set (Drain

pump) as per IS: 14220 / 1994 & its latest

amendments of following duty parameters with

suitable submersible motor as per IS: 9283 / 1994 &

its latest amendments working on 3 phase, 415 V ±

10%, 50 ± 3% Hz power supply, rated speed

RPM of following duty capacity. Material of

Constructions: Impeller: High tensile brass / LTB II;

Casing: CI FG 260; Pump & Motor shaft: SS 304;

Bearing Bush: LTB III

capacity 20 m3/hr Flow and 10 meter Head

Repairing of 700 mm dia outlet Electro-mechanical

Flowmeter(Make : E + H) including following items

(1) SITC of Display (power supply :220,

communication : RS 485, Disply: Remote with LCD

8 display for flow Rate & Totalizes, 1 job

(2) SITC of sensor Cable of required length as per

site requirement

(3) replacement of flowtube(whereever required)

(4) Calibration of the flowmeter

Mains with 1.1kV grade FRLS PVC insulated ISI

marked stranded copper conductor wire in following

type of pipe to be erected in/ on wall /ceiling with

sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size. With medium class Rigid PVC pipe

and accessories a. 2 wire 4 sq.mm (with 2.5 sq.mm

Providing following type of Modular type

accessories mounted with PVC/ metallic box, single

mounting base frame covered with textured/ metallic

10 front plate, modules erected with necessary 6 Each 236.98 9.02

connection as desired by Engineer In charge

16A single Pole Modular MCB Switch, Cat. II

Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assemble don

single MCPCB, with housing use dasa heat sink

shall be made of thick sheet Steel conforming to

IS:513 / CRCA / aluminium pressure die cast

powder coated and high U.V. & corrosion resistance

with diffuser house din aluminium casted body with

company mark/name 160 V to 270 V , Power Factor

more than 0.95, THD < 15 %,CCT 3000 K to 6500K,

11 Luminaire efficacy> 85 lumens/watt ,LED driver 2 Each 693.72 32.8

efficiency > 85 %(fitting required LM - 79 & LM -80

Certificates ) (NOTE: Below description have shown

ranges of Wattage capacity of LED fittings. The

Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Square / Circular shaped Surface / Recessed

Mount Down light with provision for spring loaded

mounting clips complete.IP20

22-24 Watts, Surge - 2KV,IP-20, 4 feet, Cat-III

Supplying and erecting LED streetlight/ Flood light

fittings with High power White LEDs wattage of

Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminium housing with

smooth finish powder coated and heat sink extruded

aluminium with diffuserand Polycarbonateoptics/

lenses with company mark /name engraved or

embossed160 to 270 V, Power Factor more than

Uniformity ratio > 0.45, Luminaire efficacy >

lumens/watt. LED driver efficiency > 85%. (fittings

required LM - 79 & LM-80 certificates) (NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings. The Engineer incharge may

select any wattage capacity between the ranges

(A) Street Light (IP-65), Surge protection - 4 KV

integraland, Light must have 440 VAC line supply

with over-voltage protection.

36-48 Watts, Surge - 2KV,IP-20, 4 feet, Cat-III

Point wiring Arrangement:

Design, supply, erection, testing and

commissioning of suitable general arrangement

of point wiring for pump house.

Point wiring for Light / Bell with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires upto 10 mtr length, in below

type of pipe erected with 6A Modular types witch

13 / bell push & accessories and earth continuity of 5 Pt. 277.16 56.58

following type, erected on PVC /Metallic

/Wooden box, single mounting base frame

covered with textured / metallic / white front

plate module serected on / in wall / ceiling as per

pipe erected, with necessary Lamp holder /

ceiling rose / H.D. Connector as directed.

(a)with medium class Rigid PVC pipe and

accessories erected flushed on wall / ceiling

General servicing and overhauling of MCC Panel

with two feeder of 110 kw (all 2 working feeder)and

two feeder of 75 KW(all 2 working feeder)Make:

Industrial control) including following Items

MCC Panel outgoing feeder of 110 kw (all

working feeder,Make: Industrial control)

a (B)SITC of AC Ameter, Digital Type (96 x 96) with 1 No. 1616 140

inbuilt ASS for Incoming(s)/

Outgoings(s), as required. in feeder no 1(110 KW)

SITC of providing instrument Transformers

complete with accessories, associated wiring &

controls, of following type & ratingResin Cast

insulated Current Transformer, Double Core with

CTR 4001000/1A or 5A, 5-15VA, Class 1.0/ 5P10

for metering/ protection, as applicable in feeder no

MCC Panel outgoing feeder of 110 kw (all

working feeder,Make: Industrial control)

c (B)SITC of On / Off / Trip Indicating lamps(110 / 6 No. 251 122

230V AC) for MCCB controlled

Outgoing module(s). in feeder no.1 & 2(110 KW)

(A)SITC of cooling fan in feeder no.2(110 KW)

(B)SITC of ELR in feeder no.2(110 KW)

MCC Panel incoming feeder,Make: Industrial

f (D) SITC of R, Y & B Phase Indicating Lamps (63.5 1 No. 466 122

/ 110 / 230 V AC) for Incoming module(s) in

MCC Panel outgoing feeder of 75 kw (all 2 working

feeder,Make: Industrial control)

g (B)SITC of On / Off / Trip Indicating lamps(110 / 6 No. 251 122

230V AC) for MCCB controlled

Outgoing module(s). in feeder no.1 & 2(75 KW)

(A)SITC of cooling fan in feeder no.1(75 KW)

(B)SITC of ELR in feeder no.2(75 KW)

Supply at site, Storage, Erecting Istallation Testing

& commissioning of Bourdon type pressure gauge,

± 1% Accuracy, direct bottom 1/2" ,NPT(M) process

connection, IP 67, Glycerine filled SS304, Case with

Bayonet type Bezel, SS 316 L bourden tube, SS

2 316 Movement material Aluminium Dial with black 6 No. 1303.00 109.00

graduation on white background, Micro Zero

adjustable pointer, neoprene gasket, Blow out

disk,shatter proof glass, SS tag plate etc as per IS

3624 (150 MM Dia) (of range 0 -10 kg/cm2 with IS

General servicing and overhauling of 180 KVAR

APFCR Panel including following items

Providing&erecting capacitor duty contactor

a phase, 415 V with proper connection for following 4 Nos. 2800.71 311.19

rating.(25 kVAR capacitor duty contactor AC3)

Supply, installation, testing & commissioning heavy

duty APP type capacitor unit, vacuum impregnated

with non-PCB / non toxic oil, internally delta

b connected with built in internal fuses complete with 90 259 26

discharge resistances & terminal cover, rated for

440 V AC, 3 Phase, 50 Hz as per IS: 13585 Part-1.

APP type Capacitor

Replacing the Silica Gel breather of the Transformer

of following capacity.(630KVA)

Cable Tray : Supply & laying MS ladder type cable

trays with side channel of size - 75 x 15 x 15 mm /

100 x 15 x 15 mm & rungs of size - 35 x 15 x 15 mm

spaced at 250 mm apart, fabricated from 2 mm thick

sheet steel in standard length of 2.5 meter, duly

finished with one coat of red oxide & two coats of

Aluminium paint as per IS including accessories

such as coupler plates / fish plates, bends, tees,

reducers, elbows, covers and electro-galvanized

hardware etc, erected on existing support as per

specification and instruction of Engineer-in charge.

of size 150(w) X 75(H) X 2.0mm Thick

Repairing of 600 mm dia inlet Electro-mechanical

Flowmeter(Make : Adept) including following items

(1) SITC of Display (power supply :220,

communication : RS 485, Disply: Remote with LCD

6 display for flow Rate & Totalizes, 1 job

(2) SITC of sensor Cable of required length as per

site requirement

(3) replacement of flowtube(whereever required)

(4) Calibration of the flowmeter

Supply, installation, testing & commissioning of

horizontal mono submersible pump set (Drain

pump) as per IS: 14220 / 1994 & its latest

amendments of following duty parameters with

suitable submersible motor as per IS: 9283 / 1994 &

its latest amendments working on 3 phase, 415 V ±

10%, 50 ± 3% Hz power supply, rated speed

RPM of following duty capacity. Material of

Constructions: Impeller: High tensile brass / LTB II;

Casing: CI FG 260; Pump & Motor shaft: SS 304;

Bearing Bush: LTB III

capacity 20 m3/hr Flow and 10 meter Head

Mains with 1.1kV grade FRLS PVC insulated ISI

marked stranded copper conductor wire in following

type of pipe to be erected in/ on wall /ceiling with

sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size. With medium class Rigid PVC pipe

and accessories a. 2 wire 4 sq.mm (with 2.5 sq.mm

Providing following type of Modular type

accessories mounted with PVC/ metallic box, single

mounting base frame covered with textured/ metallic

front plate, modules erected with necessary

connection as desired by Engineer In charge

16A single Pole Modular MCB Switch, Cat. II

Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assemble don

single MCPCB, with housing use dasa heat sink

shall be made of thick sheet Steel conforming to

IS:513 / CRCA / aluminium pressure die cast

powder coated and high U.V. & corrosion resistance

with diffuser house din aluminium casted body with

company mark/name 160 V to 270 V , Power Factor

more than 0.95, THD < 15 %,CCT 3000 K to 6500K,

10 Luminaire efficacy> 85 lumens/watt ,LED driver 2 Each 693.72 32.8

efficiency > 85 %(fitting required LM - 79 & LM -80

Certificates ) (NOTE: Below description have shown

ranges of Wattage capacity of LED fittings. The

Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Square / Circular shaped Surface / Recessed

Mount Down light with provision for spring loaded

mounting clips complete.IP20

22-24 Watts, Surge - 2KV,IP-20, 4 feet, Cat-III

Supplying and erecting LED streetlight/ Flood light

fittings with High power White LEDs wattage of

Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminium housing with

smooth finish powder coated and heat sink extruded

aluminium with diffuserand Polycarbonateoptics/

lenses with company mark /name engraved or

embossed160 to 270 V, Power Factor more than

Uniformity ratio > 0.45, Luminaire efficacy >

11 lumens/watt. LED driver efficiency > 85%. (fittings 1 Each 3080.74 123

required LM - 79 & LM-80 certificates) (NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings. The Engineer incharge may

select any wattage capacity between the ranges

(A) Street Light (IP-65), Surge protection - 4 KV

integraland, Light must have 440 VAC line supply

with over-voltage protection.

36-48 Watts, Surge - 2KV,IP-20, 4 feet, Cat-III

Point wiring Arrangement:

Design, supply, erection, testing and

commissioning of suitable general arrangement

of point wiring for pump house.

Point wiring for Light / Bell with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires upto 10 mtr length, in below

type of pipe erected with 6A Modular types witch

/ bell push & accessories and earth continuity of

following type, erected on PVC /Metallic

/Wooden box, single mounting base frame

covered with textured / metallic / white front

plate module serected on / in wall / ceiling as per

pipe erected, with necessary Lamp holder /

ceiling rose / H.D. Connector as directed.

(a)with medium class Rigid PVC pipe and

accessories erected flushed on wall / ceiling

Supply, testing & commissioning portable diesel

driven self priming horizontal mono dewatering

pump set with four wheel trolley, GI medium duty

15 delivery pipes, specials, suction strainer etc. 1 Unit 0

complete set Material of Constructions: Impeller:

Bronze, Casing: CI, Shaft: Carbon SteelCapacity :

12-30 LPS,Head:6-12 meter Head

MCC Panel with two feeder of 45 kw (all 2 working

feeder)(Make:Samudra) including following Items

1.1 SITC of AC Ameter, Digital Type (96 x 96) with 2 No. 1616 140

inbuilt ASS for Incoming(s)/

Outgoings(s), as required. in feeder(45 KW)

SITC of providing instrument Transformers

complete with accessories, associated wiring &

controls, of following type & rating

Resin Cast insulated Current Transformer, Double

150/ 5A, 5-15VA, Class 1.0 / 5P10 for metering/

MCC Panel outgoing feeder of 45 kw (all 2 working

feeder,Make: Industrial control)

1.3 (B)SITC of On / Off / Trip Indicating lamps(110 / 6 No. 251 122

230V AC) for MCCB controlled

Outgoing module(s). in feeder no.(45 KW)

SITC of 3 Phase, 4 Wire Multifunction Meter, Class

1.0 or better, Flush Mounting- 96 x 96 mm with RS

485 communication port for Incoming(s) /

Outgoings(s), as required.

MCC Panel outgoing feeder of 45 kw (all 2 working

feeder,Make: Samudra)

1.5 (D) SITC of R, Y & B Phase Indicating Lamps (63.5 1 No. 466 122

/ 110 / 230 V AC) for Incoming module(s) in

Supply at site, Storage, Erecting Istallation Testing

& commissioning of Bourdon type pressure gauge,

± 1% Accuracy, direct bottom 1/2" ,NPT(M) process

connection, IP 67, Glycerine filled SS304, Case with

Bayonet type Bezel, SS 316 L bourden tube, SS

2 316 Movement material Aluminium Dial with black 3 No. 1303.00 109.00

graduation on white background, Micro Zero

adjustable pointer, neoprene gasket, Blow out

disk,shatter proof glass, SS tag plate etc as per IS

3624 (150 MM Dia) (of range 0 -10 kg/cm2 with IS

Supply, installation, testing & commissioning of

horizontal mono submersible pump set (Drain

pump) as per IS: 14220 / 1994 & its latest

amendments of following duty parameters with

suitable submersible motor as per IS: 9283 / 1994 &

its latest amendments working on 3 phase, 415 V ±

3 10%, 50 ± 3% Hz power supply, rated speed 2900 1 Unit 15840 0

RPM of following duty capacity. Material of

Constructions: Impeller: High tensile brass / LTB II;

Casing: CI FG 260; Pump & Motor shaft: SS 304;

Bearing Bush: LTB III including piping system

capacity 20 m3/hr Flow and 10 meter Head

Supply, installation, testing & commissioning

approved make coupled vacuum pump set with

horizontal foot mounted TEFC squirrel cage motor

having under mentioned capacity working on

phase, 50 ± 3% Hz, 415 V ± 10%, with base plate,

4 DOL starter, cable, GI medium duty suction pipes of 1 Unit 52,440 0.00

required meters long, specials, valve, PVC tank of

250 litres capacity etc. complete. Material of

Constructions: Impeller- SS/CF8M, Shaft: SS410,

Casing: CIFG260

Repairing of 300 mm dia Electro-mechanical

Flowmeter(Make : Adept) including following items

(1) SITC of Display (power supply :220,

communication : RS 485, Disply: Remote with LCD 31500.0

display for flow Rate & Totalizes, 0

(2) SITC of sensor Cable of required length as per

site requirement

(3) replacement of flowtube(whereever required)

(4) Calibration of the flowmeter

Lowering of openwell Horizontal Submersible pump

sets of Cat 3.7(1300LPM X 50 mtr Head X 25 HP) in

Well/Sump with HDPE pipe/GI/MS column pipe by

6 means of chain pulley block/fixture & jointing the 2 Job 0 1000

cable with fuse unit / Control panel board including

fitting accessories & making it in working condition

including satisfactory testing. (1W+1S)

Auto transformer starter suitable for local & remote

pump control application consisting of

Auto Transformer (vacuum impregnated, air cooled

having three (3) tappings at 50%, 65%

and 80%), incomer MCCB / MPCB, overload relay

and contactors as per Type II coordination

including digital MFM with RS 485 communication

port, analogue type ammeter with selector

switch, run hour meter, required protective relays &

control accessories.

Transportation of HMSM pumpset,Panel,Cable and

pipe etc complete from NC-7 Departmental store to

7 Khetaradi HW including loading, 1 Job 0 5176

transporatation,unloading etc including labour,

hydra crane etc complete.(considering 40 km lead)

SITC of ISI mark CI D/F sluice valve (IS :14846 &

latest revisions ) of following class and dia.

Including all taxes, insurance, transportation, freight

charges, octroi, Inspection charges, Loading,

Unloading, Conveyance to departmental store,

stacking etc. complete.

100 mm dia (PN 1.0 Hand wheel/Cap operated

(PD type short body)

Providing and supplying ISI marks CI D/F reflux

valve as per IS 5312(latest edition) of following

class and diameter including all

taxes,insurance,transporatation,freight

9 charges,octroi,inspection 2 No. 5348 439.00

charges,loading,unloading,conveyence to

department store,stacking etc.complete.

PN1.0,100 mm dia

Mains with 1.1kV grade FRLS PVC insulated ISI

marked stranded copper conductor wire in following

type of pipe to be erected in/ on wall /ceiling with

sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size. With medium class Rigid PVC pipe

and accessories a. 2 wire 4 sq.mm (with 2.5 sq.mm

Providing following type of Modular type

accessories mounted with PVC/ metallic box, single

mounting base frame covered with textured/ metallic

11 front plate, modules erected with necessary 6 Each 236.98 9.02

connection as desired by Engineer In charge

16A single Pole Modular MCB Switch, Cat. II

Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assemble don

single MCPCB, with housing use dasa heat sink

shall be made of thick sheet Steel conforming to

IS:513 / CRCA / aluminium pressure die cast

powder coated and high U.V. & corrosion resistance

with diffuser house din aluminium casted body with

company mark/name 160 V to 270 V , Power Factor

more than 0.95, THD < 15 %,CCT 3000 K to 6500K,

12 Luminaire efficacy> 85 lumens/watt ,LED driver 2 Each 693.72 32.8

efficiency > 85 %(fitting required LM - 79 & LM -80

Certificates ) (NOTE: Below description have shown

ranges of Wattage capacity of LED fittings. The

Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Square / Circular shaped Surface / Recessed

Mount Down light with provision for spring loaded

mounting clips complete.IP20

22-24 Watts, Surge - 2KV,IP-20, 4 feet, Cat-III

Supplying and erecting LED streetlight/ Flood light

fittings with High power White LEDs wattage of

Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminium housing with

smooth finish powder coated and heat sink extruded

aluminium with diffuserand Polycarbonateoptics/

lenses with company mark /name engraved or

embossed160 to 270 V, Power Factor more than

Uniformity ratio > 0.45, Luminaire efficacy >

lumens/watt. LED driver efficiency > 85%. (fittings

required LM - 79 & LM-80 certificates) (NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings. The Engineer incharge may

select any wattage capacity between the ranges

(A) Street Light (IP-65), Surge protection - 4 KV

integraland, Light must have 440 VAC line supply

with over-voltage protection.

36-48 Watts, Surge - 2KV,IP-20, 4 feet, Cat-III

Point wiring Arrangement:Design, supply,

erection, testing and commissioning of suitable

general arrangement of point wiring for pump

house. Point wiring for Light / Bell with 2-1.5

sq.mm & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires upto 10 mtr

length, in below type of pipe erected with 6A

Modular types witch / bell push & accessories

and earth continuity of following type, erected

on PVC /Metallic /Wooden box, single mounting

base frame covered with textured / metallic /

white front plate module serected on / in wall /

ceiling as per pipe erected, with necessary

Lamp holder / ceiling rose / H.D. Connector as

directed.(a)with medium class Rigid PVC pipe

and accessories erected flushed on wall / ceiling

Control Panel Board

SITC of 51-60 HP Auto transformer starter

suitable for local & remote pump control

application consisting of Auto Transformer

(vacuum impregnated, air cooled having three

15 (3) tappings at 50%, 65% and 80%), incomer 1 No. 46238

MCCB / MPCB, overload relay and contactors as

per Type II coordination including digital MFM

with RS 485 communication port, analogue type

ammeter with selector switch, run hour meter,

required protective relays & control accessories.

General servicing and overhauling of 70 KVAR

APFCR Panel including following items

sitc of capacitor duty contactor 3 phase, 415 V with

a proper connection for following rating.(15 kVAR 4 No. 2202.93 244.77

capacitor duty contactor AC3)

Supply, installation, testing & commissioning heavy

duty APP type capacitor unit, vacuum impregnated

with non-PCB / non toxic oil, internally delta

b connected with built in internal fuses complete with 70 259 26

discharge resistances & terminal cover, rated for

440 V AC, 3 Phase, 50 Hz as per IS: 13585 Part-1.

APP type Capacitor

Supplying & erecting funnel type earthing having

earth plate of following size burred in specifically

prepared earth pit 3 mtr. below ground with 40 kg.

charcoal and salt with alternate layers of charcoal

& salt, 20mm.dia. G.I. pipe with Funnel with a wire

mesh for watering & bricks masonry block, C.I.

Cover complete as per para 7.3 of IS 3043 with

necessary length of copper earth wire No 6 SWG

bolted with lug to the plate and covered in 12 mm

dia. G.I. pipe 2.5 mtr long complete connected to

the nearest switch gear with end socket as per

direction & duly tested by earth tester confirming to

IS (As per drawing) with With 45 x 45 x 0.35 cms.

C.I. earth plate For Panel

Providing and erecting required size HOT dip

Galvinized Strip of size 50 mm width X 12 mm

thickness for earthing of

HT/OCB/ACB/Transformer/LT Panel Board/Motors

etc. using copper clamp for the purpose of

connecting panel body earth to earth pit etc

complete as per site requirement.

Supply and installation of MS fabricated structure

cabin @ site of work using 65 mm, 50 mm & 25 mm

square pipes with cabin minimum size 5.0 mtr X

mtr X 3 mtr or required size as per site situation

including providing & fitting of (1) backalite sheet

mm thick in sides, (2) 20 guage MS sheet outer side

for side walls, (3) backalite sheet 3.5 mm thick sheet

4 for roof side, (4) 24 guage GI sheet out side with 15 1 No 233100 0

mm plywood sandwitch fitting & flooring with 19 mm

water proof plywood sheet and (5) shock proof

rubber mating. Job includes oil painting two coats,

door locking handle arrangement, providing proper

air entilation and fuse box. The meter & fuse box

should be fitted on timber hold fast for holding screw

or nut bolts by semi skilled labour as per detailed

technical specifications, drawings and instructions of

the Engineer-in-charge.

Supply at site, Storage, Erecting Istallation Testing

& commissioning of Bourdon type pressure gauge,

± 1% Accuracy, direct bottom 1/2" ,NPT(M) process

connection, IP 67, Glycerine filled SS304, Case with

Bayonet type Bezel, SS 316 L bourden tube, SS

5 316 Movement material Aluminium Dial with black 4 No. 1303.00 109.00

graduation on white background, Micro Zero

adjustable pointer, neoprene gasket, Blow out

disk,shatter proof glass, SS tag plate etc as per IS

3624 (150 MM Dia) (of range 0 -10 kg/cm2 with IS

Providing & casting in situ reinforced cement

concrete in grade M 20 (Ratio 1:2:4) using quartzite

trap metal of size 6 mm to 12 mm for RCC work,

6 including scaffolding centering, form work, 9 9180.40 0.00

consolidating, curing etc. inclusive providing and

binding necessary size TMT steel bars of Fe

grade with water proofing compound as per

directives for pipe support / thrust blocks.

Design, Supply, fabrication & erection of metallic

floating Jetty / Pontoon for pump sets with

required capacity chain pulley block and gantry

7 girder structure including required materials like MS 1 Set 672000 0

angles, channels, floats, GI / MS pipes, hardware,

MS / Aluminum chequered plate with MS / GI safety

railings etc. complete.

ITC of Departmently supply 350 mm Floater with

necessary fitting

Supply, laying, testing & commissioning 1.1 kV

grade, XLPE insulated, stranded Aluminium

conductor, galvanised steel flat strip / round wire

armoured, extruded PVC type ST2 sheathed, heavy

duty cable (to be laid on wall surface with necessary

clamps / in existing cable trench / cable trays /

conduit / pipe sleeves at road crossing or floor as

per site requirement) conforming to IS:7098 (Part-

1) & IEC:60502 (Part-1) of following sizes:

Vegadvav Boosting station

SITC of Horizontal mono submersible pump set of

Cat SM-2.6 and accessories as per IS 14220/1994 &

latest revisions for 3 phase, 400/440 Vott, 50 C/s AC

Supply & 2900 RPM along with sand guard & cable (05

mtr length) etc. complete unit as per detailed technical

specifications & MOC :- Casing : CI -FG

Impeller : Bronze & Shaft : S.S:410 of following

capacity -(600 lpm,40 mtr head,12.5 hp)

Providing, Supplying, Lowering, Laying and jointing

of ISI mark G.I. pipes (IS 1239) with couplings & GI

specials of following class and diameter in proper

position, grade and alignment as directed by

Engineer-In-Charge including conveyance from

2 stores to site work, labour, giving hyrdraulic testing 15 Mtr 598.00

including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores,

stacking etc, complete

80mm dia Medium Duty for delivery pipe

Providing, Supplying, Lowering, Laying and jointing

of ISI mark G.I. pipes (IS 1239) with couplings & GI

specials of following class and diameter in proper

position, grade and alignment as directed by

Engineer-In-Charge including conveyance from

3 stores to site work, labour, giving hyrdraulic testing 10 Mtr 1143.00

including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores,

stacking etc, complete

125mm dia Medium Duty for Heaer pipe

Manufacture, supply and delivery of GI special

flange ended including all taxes. Upto 300 mm dia.

Supply at site, Storage, Erecting Istallation

Testing & commissioning of Bourdon type

pressure gauge, ± 1% Accuracy, direct bottom

1/2" ,NPT(M) process connection, IP

Glycerine filled SS304, Case with Bayonet type

Bezel, SS 316 L bourden tube, SS 316

Movement material Aluminium Dial with black

graduation on white background, Micro Zero

adjustable pointer, neoprene gasket, Blow out

disk,shatter proof glass, SS tag plate etc as per

IS 3624 (150 MM Dia) (of range 0 -10 kg/cm2

Supply at Site, Storage,Erection, Installation,

Testing & Commissioning of Both End Flanged

80 mm Ø C.I. Non rising Spindle Type Sluice

Valve of PN 1.0 with hand wheel opereted (pd

type short body) etc. Complete. including all

6 taxes, insurance, transportation, freight charges, 1 No. 2652.00

octroi, inspection charges, loading, unloading,

conveyance to departmental stores/site, stacking

etc. complete. 1no. for Delivery piping as per IS

14846 (Latest Edition) & Specification With ISI

Providing and supplying ISI marks CI D/F reflux valve as

per IS 5312(latest edition) of following class and

diameter including all

taxes,insurance,transporatation,freight

charges,octroi,inspection

charges,loading,unloading,conveyence to department

store,stacking etc.complete.

PN1.0,80 mm dia on delivery pipe

Supply at Site, Storage,Erection, Installation,

Testing & Commissioning of Both End Flanged

125 mm Ø C.I. Non rising Spindle Type Sluice

Valve of PN 1.0 with hand wheel opereted (pd

type short body) etc. Complete. including all

8 taxes, insurance, transportation, freight charges, 1 No. 4464.00

octroi, inspection charges, loading, unloading,

conveyance to departmental stores/site, stacking

etc. complete. 1no. for Delivery piping as per IS

14846 (Latest Edition) & Specification With ISI

Mark Only. (ON delivery Pipe)

Providing and supplying ISI marks CI D/F reflux valve as

per IS 5312(latest edition) of following class and

diameter including all

taxes,insurance,transporatation,freight

charges,octroi,inspection

charges,loading,unloading,conveyence to department

store,stacking etc.complete.

PN1.0,125 mm dia on header pipe

Providing approved make Triple Pole Metal

Clad switch Fuse Unit 415/500 V with HRC

10 fuse of suitable load and neutral link confirming 1 NO 3229.00

Erection & connection charges for 63A HRC (SFU) on

11 New angle iron frame duly painted with red oxide.

Supply, laying, testing & commissioning 1.1 kV

grade, XLPE insulated, stranded Aluminium

conductor, galvanised steel flat strip / round wire

armoured, extruded PVC type ST2 sheathed,

heavy duty cable (to be laid on wall surface with

12 necessary clamps / in existing cable trench / cable 20 mtr 91.00

trays / conduit / pipe sleeves at road crossing or

floor as per site requirement) (including cable

lugs,termination etc.) conforming to IS:

(Part-1) & IEC: 60502 (Part-1) of 4 Core X

sizes: - From SFU to change over switch

Supply of Approved make Iron Clad or metal

clad four pole change over switch 415V.

confirming to IS of following capacity

Changeover switch (63 A ) Cat - III on new

angle iron frame duly painted with red oxide

Supply, laying, testing & commissioning 1.1 kV

grade, XLPE insulated, stranded Aluminium

conductor, galvanised steel flat strip / round wire

armoured, extruded PVC type ST2 sheathed,

heavy duty cable (to be laid on wall surface with

14 necessary clamps / in existing cable trench / cable 20 mtr 72.00

trays / conduit / pipe sleeves at road crossing or

floor as per site requirement) (including cable

lugs,termination etc.) conforming to IS:

(Part-1) & IEC: 60502 (Part-1) of 4 Core X 6.0 sizes:

- From change over switch to Panel

SITC of star Delta Starter from 11 to 15 HP for local

& remote pump control application consisting of MPCB,

overload relay and contactors as per Type II coordination

including digital voltmeter,analogue ammeter with

15 selector switch, run hour meter, required protective 1 NO 11119.00

relays & control accessoriesThis item also includes

APP type suitable rating capacitor as per GWSSB

rate contract specifications.

Supply, laying, testing & commissioning 1.1 kV

grade, XLPE insulated, stranded Aluminium

conductor, galvanised steel flat strip / round wire

armoured, extruded PVC type ST2 sheathed,

heavy duty cable (to be laid on wall surface with

16 necessary clamps / in existing cable trench / cable 30 mtr 55.00

trays / conduit / pipe sleeves at road crossing or

floor as per site requirement) (including cable

lugs,termination etc.) conforming to IS:

(Part-1) & IEC: 60502 (Part-1) of 3 Core X 4.0 sizes:

- From control panel to Motor

Maintenance free Chemical Earting:For

SITC of UL Listed Maintenance Free Earting

System made of copper bonded rod of 10 feet

(3 mt approx.) length, 17.2mm dia. (Minimum

copper bonding shall be 0.25mm, suitable for

25 kA fault current) along with Rod-to-

conductor connectors, 95% pure Crabon-

Based Earth enhancement material of 30 kg,

pit cover as required and as per specification.

Providing and erecting required size HOT dip

Galvinized Strip of size 50 mm width X

mm thickness for earthing of

HT/OCB/ACB/Transformer/LT Panel

Board/Motors etc. using copper clamp for the

purpose of connecting panel body earth to

earth pit etc complete as per site requirement.

Providing Chain pulley block with tripple gear

arrangement, lifting hook, load chain & hand

19 chain & locking device & spur gear travelling 1 set 14400.00

trolley & all accessories with 6 mtr lift - 1 Ton

SITC of "I" Section Beam 150mm X 75mm X

8 mm(TW 5mm) - Structure Steel Required for

gentry girder arrangement for Loading /

Unloading of pump/Motor from / to floor of

pump house to / from Vehicle including

required Welding & foundation of Cement

Concerete & Painting as per requirement etc.

Assuming - 6 Mtr Verticle poe 4 Nos. & 6 Mtr.

Horizontal Fitting 4 No. 6X4 + 6X4 = 24+24 mtr

(I Section Beam Size-150mm X 75mm X 8 mm

Additional Bolt Nut foundation plate Etc.

Kg= Say 792 Kg.

Malniyad Boosting station

For Anjar/Malaniyad Village

SITC of Horizontal mono submersible pump set of

Cat SM-4.5 and accessories as per IS 14220/1994 &

latest revisions for 3 phase, 400/440 Vott, 50 C/s AC

Supply & 2900 RPM along with sand guard & cable (05

mtr length) etc. complete unit as per detailed technical

specifications & MOC :- Casing : CI -FG

Impeller : Bronze & Shaft : S.S:410 of following

capacity -(1600 lpm,26 mtr head,17.5 hp)

Providing, Supplying, Lowering, Laying and jointing

of ISI mark G.I. pipes (IS 1239) with couplings & GI

specials of following class and diameter in proper

position, grade and alignment as directed by

Engineer-In-Charge including conveyance from

2 stores to site work, labour, giving hyrdraulic testing 10 Mtr 864.00

including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores,

stacking etc, complete100 mm dia Medium Duty

for delivery pipe

Providing, Supplying, Lowering, Laying and jointing

of ISI mark G.I. pipes (IS 1239) with couplings & GI

specials of following class and diameter in proper

position, grade and alignment as directed by

Engineer-In-Charge including conveyance from

stores to site work, labour, giving hyrdraulic testing

3 including all taxes, insurance, transportation, 10 Mtr 1807.00

freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores,

stacking etc, complete

200 mm dia Medium Duty for Header pipe (Rate

for 150 mm pipe is 1355,so rate for 200mm is

Manufacture, supply and delivery of GI special

flange ended including all taxes. Upto 300 mm dia.

Supply at site, Storage, Erecting Istallation

Testing & commissioning of Bourdon type

pressure gauge, ± 1% Accuracy, direct bottom

1/2" ,NPT(M) process connection, IP

Glycerine filled SS304, Case with Bayonet type

Bezel, SS 316 L bourden tube, SS 316

Movement material Aluminium Dial with black

graduation on white background, Micro Zero

adjustable pointer, neoprene gasket, Blow out

disk,shatter proof glass, SS tag plate etc as per

IS 3624 (150 MM Dia) (of range 0 -10 kg/cm2

Supply at Site, Storage,Erection, Installation,

Testing & Commissioning of Both End Flanged

100 mm Ø C.I. Non rising Spindle Type Sluice

Valve of PN 1.0 with hand wheel opereted (pd

type short body) etc. Complete. including all

6 taxes, insurance, transportation, freight charges, 1 No. 3563.00

octroi, inspection charges, loading, unloading,

conveyance to departmental stores/site, stacking

etc. complete. 1no. for Delivery piping as per IS

14846 (Latest Edition) & Specification With ISI

Providing and supplying ISI marks CI D/F reflux valve as

per IS 5312(latest edition) of following class and

diameter including all

taxes,insurance,transporatation,freight

charges,octroi,inspection

charges,loading,unloading,conveyence to department

store,stacking etc.complete.

PN1.0,100 mm dia on delivery pipe

Supply at Site, Storage,Erection, Installation,

Testing & Commissioning of Both End Flanged

200 mm Ø C.I. Non rising Spindle Type Sluice

Valve of PN 1.0 with hand wheel opereted (pd

type short body) etc. Complete. including all

8 taxes, insurance, transportation, freight charges, 1 No. 9813.00

octroi, inspection charges, loading, unloading,

conveyance to departmental stores/site, stacking

etc. complete. 1no. for Delivery piping as per IS

14846 (Latest Edition) & Specification With ISI

Mark Only. (ON delivery Pipe)

Providing and supplying ISI marks CI D/F reflux valve as

per IS 5312(latest edition) of following class and

diameter including all

taxes,insurance,transporatation,freight

charges,octroi,inspection

charges,loading,unloading,conveyence to department

store,stacking etc.complete.

PN1.0,200 mm dia on header pipe

Providing approved make Triple Pole Metal

Clad switch Fuse Unit 415/500 V with HRC

10 fuse of suitable load and neutral link confirming 1 NO 5755.00

Erection & connection charges for 125A HRC

11 (SFU) on New angle iron frame duly painted 1 NO 94.00 43.00

with red oxide.(parallel rate of 100A is taken)

Supply, laying, testing & commissioning 1.1 kV

grade, XLPE insulated, stranded Aluminium

conductor, galvanised steel flat strip / round wire

armoured, extruded PVC type ST2 sheathed,

heavy duty cable (to be laid on wall surface with

12 necessary clamps / in existing cable trench / cable 20 mtr 102.00

trays / conduit / pipe sleeves at road crossing or

floor as per site requirement) (including cable

lugs,termination etc.) conforming to IS:

(Part-1) & IEC: 60502 (Part-1) of 4 Core X

sizes: - From SFU to change over switch

Supply of Approved make Iron Clad or metal

clad four pole change over switch 415V.

13 confirming to IS of following capacity 1 No. 3967.00

Changeover switch (63 A ) Cat - III on new

angle iron frame duly painted with red oxide

Supply, laying, testing & commissioning 1.1 kV

grade, XLPE insulated, stranded Aluminium

conductor, galvanised steel flat strip / round wire

armoured, extruded PVC type ST2 sheathed,

heavy duty cable (to be laid on wall surface with

14 necessary clamps / in existing cable trench / cable 20 mtr 102.00

trays / conduit / pipe sleeves at road crossing or

floor as per site requirement) (including cable

lugs,termination etc.) conforming to IS:

(Part-1) & IEC: 60502 (Part-1) of 4 Core X

sizes: - From change over switch to Panel

SITC of star Delta Starter from 16 to 20 HP for local

& remote pump control application consisting of MPCB,

overload relay and contactors as per Type II coordination

including digital voltmeter,analogue ammeter with

15 selector switch, run hour meter, required protective 1 NO 13771.00

relays & control accessoriesThis item also includes

APP type suitable rating capacitor as per GWSSB

rate contract specifications.

Supply, laying, testing & commissioning 1.1 kV

grade, XLPE insulated, stranded Aluminium

conductor, galvanised steel flat strip / round wire

armoured, extruded PVC type ST2 sheathed,

heavy duty cable (to be laid on wall surface with

16 necessary clamps / in existing cable trench / cable 30 mtr 55.00

trays / conduit / pipe sleeves at road crossing or

floor as per site requirement) (including cable

lugs,termination etc.) conforming to IS:

(Part-1) & IEC: 60502 (Part-1) of 3 Core X 4.0 sizes:

- From control panel to Motor

Maintenance free Chemical Earting:For

SITC of UL Listed Maintenance Free Earting

System made of copper bonded rod of 10 feet

(3 mt approx.) length, 17.2mm dia. (Minimum

copper bonding shall be 0.25mm, suitable for

25 kA fault current) along with Rod-to-

conductor connectors, 95% pure Crabon-

Based Earth enhancement material of 30 kg,

pit cover as required and as per specification.

Providing and erecting required size HOT dip

Galvinized Strip of size 50 mm width X

mm thickness for earthing of

18 HT/OCB/ACB/Transformer/LT Panel 100 Kgs. 60.00

Board/Motors etc. using copper clamp for the

purpose of connecting panel body earth to

earth pit etc complete as per site requirement.

Providing Chain pulley block with tripple gear

arrangement, lifting hook, load chain & hand

chain & locking device & spur gear travelling

trolley & all accessories with 6 mtr lift - 1 Ton

SITC of "I" Section Beam 150mm X 75mm X

8 mm(TW 5mm) - Structure Steel Required for

gentry girder arrangement for Loading /

Unloading of pump/Motor from / to floor of

pump house to / from Vehicle including

required Welding & foundation of Cement

Concerete & Painting as per requirement etc.

Assuming - 6 Mtr Verticle poe 4 Nos. & 6 Mtr.

Horizontal Fitting 4 No. 6X4 + 6X4 = 24+24 mtr

(I Section Beam Size-150mm X 75mm X 8 mm

Additional Bolt Nut foundation plate Etc.

Kg= Say 792 Kg.

For Mangalpur/Ranmalpur Village

SITC of Horizontal mono submersible pump set of

Cat SM-3.7 and accessories as per IS 14220/1994 &

latest revisions for 3 phase, 400/440 Vott, 50 C/s AC

Supply & 2900 RPM along with sand guard & cable (05

mtr length) etc. complete unit as per detailed technical

specifications & MOC :- Casing : CI -FG

Impeller : Bronze & Shaft : S.S:410 of following

capacity -(1300 lpm,50 mtr head,25 hp)

Providing, Supplying, Lowering, Laying and jointing

of ISI mark G.I. pipes (IS 1239) with couplings & GI

specials of following class and diameter in proper

position, grade and alignment as directed by

Engineer-In-Charge including conveyance from

2 stores to site work, labour, giving hyrdraulic testing 15 Mtr 598.00

including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores,

stacking etc, complete

80mm dia Medium Duty for delivery pipe

Providing, Supplying, Lowering, Laying and jointing

of ISI mark G.I. pipes (IS 1239) with couplings & GI

specials of following class and diameter in proper

position, grade and alignment as directed by

Engineer-In-Charge including conveyance from

3 stores to site work, labour, giving hyrdraulic testing 10 Mtr 1807.00

including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores,

stacking etc, complete

200 mm dia Medium Duty for Header pipe

Manufacture, supply and delivery of GI special

flange ended including all taxes. Upto 300 mm dia.

Supply at site, Storage, Erecting Istallation

Testing & commissioning of Bourdon type

pressure gauge, ± 1% Accuracy, direct bottom

1/2" ,NPT(M) process connection, IP

Glycerine filled SS304, Case with Bayonet type

Bezel, SS 316 L bourden tube, SS 316

Movement material Aluminium Dial with black

graduation on white background, Micro Zero

adjustable pointer, neoprene gasket, Blow out

disk,shatter proof glass, SS tag plate etc as per

IS 3624 (150 MM Dia) (of range 0 -10 kg/cm2

Supply at Site, Storage,Erection, Installation,

Testing & Commissioning of Both End Flanged

80 mm Ø C.I. Non rising Spindle Type Sluice

Valve of PN 1.0 with hand wheel opereted (pd

type short body) etc. Complete. including all

6 taxes, insurance, transportation, freight charges, 1 No. 2652.00

octroi, inspection charges, loading, unloading,

conveyance to departmental stores/site, stacking

etc. complete. 1no. for Delivery piping as per IS

14846 (Latest Edition) & Specification With ISI

Providing and supplying ISI marks CI D/F reflux valve as

per IS 5312(latest edition) of following class and

diameter including all

taxes,insurance,transporatation,freight

charges,octroi,inspection

charges,loading,unloading,conveyence to department

store,stacking etc.complete.

PN1.0,80 mm dia on delivery pipe

Supply at Site, Storage,Erection, Installation,

Testing & Commissioning of Both End Flanged

200 mm Ø C.I. Non rising Spindle Type Sluice

Valve of PN 1.0 with hand wheel opereted (pd

type short body) etc. Complete. including all

8 taxes, insurance, transportation, freight charges, 1 No. 9813.00

octroi, inspection charges, loading, unloading,

conveyance to departmental stores/site, stacking

etc. complete. 1no. for Delivery piping as per IS

14846 (Latest Edition) & Specification With ISI

Mark Only. (ON delivery Pipe)

Providing and supplying ISI marks CI D/F reflux valve as

per IS 5312(latest edition) of following class and

diameter including all

taxes,insurance,transporatation,freight

charges,octroi,inspection

charges,loading,unloading,conveyence to department

store,stacking etc.complete.

PN1.0,200 mm dia on header pipe

Supply, laying, testing & commissioning 1.1 kV

grade, XLPE insulated, stranded Aluminium

conductor, galvanised steel flat strip / round wire

armoured, extruded PVC type ST2 sheathed,

12 heavy duty cable (to be laid on wall surface with 20 mtr 102.00

necessary clamps / in existing cable trench / cable

trays / conduit / pipe sleeves at road crossing or

floor as per site requirement) (including cable

lugs,termination etc.) conforming to IS:

(Part-1) & IEC: 60502 (Part-1) of 4 Core X

sizes: - From SFU to change over switch

Supply of Approved make Iron Clad or metal

clad four pole change over switch 415V.

13 confirming to IS of following capacity 1 No. 12119.00

Changeover switch (100 A ) Cat - III on new

angle iron frame duly painted with red oxide

Supply, laying, testing & commissioning 1.1 kV

grade, XLPE insulated, stranded Aluminium

conductor, galvanised steel flat strip / round wire

armoured, extruded PVC type ST2 sheathed,

heavy duty cable (to be laid on wall surface with

14 necessary clamps / in existing cable trench / cable 20 mtr 102.00

trays / conduit / pipe sleeves at road crossing or

floor as per site requirement) (including cable

lugs,termination etc.) conforming to IS:

(Part-1) & IEC: 60502 (Part-1) of 4 Core X

sizes: - From change over switch to Panel

Auto transformer starter suitable for local & remote

pump control application consisting of

Auto Transformer (vacuum impregnated, air cooled

having three (3) tappings at 50%, 65%

and 80%), incomer MCCB / MPCB, overload relay and

contactors as per Type II coordination

including digital MFM with RS 485 communication port,

analogue type ammeter with selector

switch, run hour meter, required protective relays &

control accessories.(21 to 30 HP)

Supply, laying, testing & commissioning 1.1 kV

grade, XLPE insulated, stranded Aluminium

conductor, galvanised steel flat strip / round wire

armoured, extruded PVC type ST2 sheathed,

heavy duty cable (to be laid on wall surface with

16 necessary clamps / in existing cable trench / cable 40 mtr 80.00

trays / conduit / pipe sleeves at road crossing or

floor as per site requirement) (including cable

lugs,termination etc.) conforming to IS:

(Part-1) & IEC: 60502 (Part-1) of 3 Core X

sizes: - From control panel to Motor

Maintenance free Chemical Earting:For

SITC of UL Listed Maintenance Free Earting

System made of copper bonded rod of 10 feet

(3 mt approx.) length, 17.2mm dia. (Minimum

copper bonding shall be 0.25mm, suitable for

25 kA fault current) along with Rod-to-

conductor connectors, 95% pure Crabon-

Based Earth enhancement material of 30 kg,

pit cover as required and as per specification.

Providing and erecting required size HOT dip

Galvinized Strip of size 50 mm width X

mm thickness for earthing of

HT/OCB/ACB/Transformer/LT Panel

Board/Motors etc. using copper clamp for the

purpose of connecting panel body earth to

earth pit etc complete as per site requirement.

Juna devaliya Boosting station

For Dhulkot/Survadar Village

SITC of Horizontal mono submersible pump set of

Cat SM-3.1 and accessories as per IS 14220/1994 &

latest revisions for 3 phase, 400/440 Vott, 50 C/s AC

Supply & 2900 RPM along with sand guard & cable (05

mtr length) etc. complete unit as per detailed technical

specifications & MOC :- Casing : CI -FG

Impeller : Bronze & Shaft : S.S:410 of following

capacity -(700 lpm,24 mtr head,10 hp)

Providing, Supplying, Lowering, Laying and jointing

of ISI mark G.I. pipes (IS 1239) with couplings & GI

specials of following class and diameter in proper

position, grade and alignment as directed by

Engineer-In-Charge including conveyance from

2 stores to site work, labour, giving hyrdraulic testing 15 Mtr 598.00

including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores,

stacking etc, complete

80mm dia Medium Duty for delivery pipe

Providing, Supplying, Lowering, Laying and jointing

of ISI mark G.I. pipes (IS 1239) with couplings & GI

specials of following class and diameter in proper

position, grade and alignment as directed by

Engineer-In-Charge including conveyance from

3 stores to site work, labour, giving hyrdraulic testing 10 Mtr 1143.00

including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores,

stacking etc, complete

125mm dia Medium Duty for Heaer pipe

Manufacture, supply and delivery of GI special

flange ended including all taxes. Upto 300 mm dia.

Supply at site, Storage, Erecting Istallation

Testing & commissioning of Bourdon type

pressure gauge, ± 1% Accuracy, direct bottom

1/2" ,NPT(M) process connection, IP

Glycerine filled SS304, Case with Bayonet type

5 Bezel, SS 316 L bourden tube, SS 316 2 No. 1303.00

Movement material Aluminium Dial with black

graduation on white background, Micro Zero

adjustable pointer, neoprene gasket, Blow out

disk,shatter proof glass, SS tag plate etc as per

IS 3624 (150 MM Dia) (of range 0 -10 kg/cm2

Supply at Site, Storage,Erection, Installation,

Testing & Commissioning of Both End Flanged

80 mm Ø C.I. Non rising Spindle Type Sluice

Valve of PN 1.0 with hand wheel opereted (pd

type short body) etc. Complete. including all

6 taxes, insurance, transportation, freight charges, 1 No. 2652.00

octroi, inspection charges, loading, unloading,

conveyance to departmental stores/site, stacking

etc. complete. 1no. for Delivery piping as per IS

14846 (Latest Edition) & Specification With ISI

Providing and supplying ISI marks CI D/F reflux valve as

per IS 5312(latest edition) of following class and

diameter including all

taxes,insurance,transporatation,freight

charges,octroi,inspection

charges,loading,unloading,conveyence to department

store,stacking etc.complete.

PN1.0,80 mm dia on delivery pipe

Supply at Site, Storage,Erection, Installation,

Testing & Commissioning of Both End Flanged

125 mm Ø C.I. Non rising Spindle Type Sluice

Valve of PN 1.0 with hand wheel opereted (pd

type short body) etc. Complete. including all

8 taxes, insurance, transportation, freight charges, 1 No. 4464.00

octroi, inspection charges, loading, unloading,

conveyance to departmental stores/site, stacking

etc. complete. 1no. for Delivery piping as per IS

14846 (Latest Edition) & Specification With ISI

Mark Only. (ON delivery Pipe)

Providing and supplying ISI marks CI D/F reflux valve as

per IS 5312(latest edition) of following class and

diameter including all

taxes,insurance,transporatation,freight

charges,octroi,inspection

charges,loading,unloading,conveyence to department

store,stacking etc.complete.

PN1.0,125 mm dia on header pipe

Providing approved make Triple Pole Metal

Clad switch Fuse Unit 415/500 V with HRC

10 fuse of suitable load and neutral link confirming 1 NO 5755.00

Erection & connection charges for 125A HRC

11 (SFU) on New angle iron frame duly painted 1 NO 94.00 43.00

with red oxide.(parallel rate of 100A is taken)

Supply, laying, testing & commissioning 1.1 kV

grade, XLPE insulated, stranded Aluminium

conductor, galvanised steel flat strip / round wire

12 armoured, extruded PVC type ST2 sheathed, 20 mtr 64.00

heavy duty cable (to be laid on wall surface with

necessary clamps / in existing cable trench / cable

trays / conduit / pipe sleeves at road crossing or

floor as per site requirement) (including cable

lugs,termination etc.) conforming to IS:

(Part-1) & IEC: 60502 (Part-1) of 4 Core X 4.0 sizes:

- From SFU to change over switch

Supply of Approved make Iron Clad or metal

clad four pole change over switch 415V.

13 confirming to IS of following capacity 1 No. 3967.00

Changeover switch (63 A ) Cat - III on new

angle iron frame duly painted with red oxide

Supply, laying, testing & commissioning 1.1 kV

grade, XLPE insulated, stranded Aluminium

conductor, galvanised steel flat strip / round wire

armoured, extruded PVC type ST2 sheathed,

heavy duty cable (to be laid on wall surface with

14 necessary clamps / in existing cable trench / cable 20 mtr 64.00

trays / conduit / pipe sleeves at road crossing or

floor as per site requirement) (including cable

lugs,termination etc.) conforming to IS:

(Part-1) & IEC: 60502 (Part-1) of 4 Core X 4.0 sizes:

- From change over switch to Panel

SITC of star Delta Starter from 8 to 10 HP for local

& remote pump control application consisting of MPCB,

overload relay and contactors as per Type II coordination

including digital voltmeter,analogue ammeter with

15 selector switch, run hour meter, required protective 1 NO 9128.00

relays & control accessoriesThis item also includes

APP type suitable rating capacitor as per GWSSB

rate contract specifications.

Supply, laying, testing & commissioning 1.1 kV

grade, XLPE insulated, stranded Aluminium

conductor, galvanised steel flat strip / round wire

armoured, extruded PVC type ST2 sheathed,

heavy duty cable (to be laid on wall surface with

16 necessary clamps / in existing cable trench / cable 40 mtr 55.00

trays / conduit / pipe sleeves at road crossing or

floor as per site requirement) (including cable

lugs,termination etc.) conforming to IS:

(Part-1) & IEC: 60502 (Part-1) of 3 Core X 4.0 sizes:

- From control panel to Motor

Maintenance free Chemical Earting:For

SITC of UL Listed Maintenance Free Earting

System made of copper bonded rod of 10 feet

(3 mt approx.) length, 17.2mm dia. (Minimum

copper bonding shall be 0.25mm, suitable for

25 kA fault current) along with Rod-to-

conductor connectors, 95% pure Crabon-

Based Earth enhancement material of 30 kg,

pit cover as required and as per specification.

Providing and erecting required size HOT dip

Galvinized Strip of size 50 mm width X

18 mm thickness for earthing of 100 Kgs. 60.00

HT/OCB/ACB/Transformer/LT Panel

Board/Motors etc. using copper clamp for the

purpose of connecting panel body earth to

earth pit etc complete as per site requirement.

Providing Chain pulley block with tripple gear

arrangement, lifting hook, load chain & hand

19 chain & locking device & spur gear travelling 1 set 14400.00

trolley & all accessories with 6 mtr lift - 1 Ton

SITC of "I" Section Beam 150mm X 75mm X

8 mm(TW 5mm) - Structure Steel Required for

gentry girder arrangement for Loading /

Unloading of pump/Motor from / to floor of

pump house to / from Vehicle including

required Welding & foundation of Cement

Concerete & Painting as per requirement etc.

Assuming - 6 Mtr Verticle poe 4 Nos. & 6 Mtr.

Horizontal Fitting 4 No. 6X4 + 6X4 = 24+24 mtr

(I Section Beam Size-150mm X 75mm X 8 mm

Additional Bolt Nut foundation plate Etc.

Kg= Say 792 Kg.

For juna/nava Devaliya Village

SITC of Horizontal mono submersible pump set of

Cat SM-3.7 and accessories as per IS 14220/1994 &

latest revisions for 3 phase, 400/440 Vott, 50 C/s AC

Supply & 2900 RPM along with sand guard & cable (05

mtr length) etc. complete unit as per detailed technical

specifications & MOC :- Casing : CI -FG

Impeller : Bronze & Shaft : S.S:410 of following

capacity -(1300 lpm,50 mtr head,25 hp)

Providing, Supplying, Lowering, Laying and jointing

of ISI mark G.I. pipes (IS 1239) with couplings & GI

specials of following class and diameter in proper

position, grade and alignment as directed by

Engineer-In-Charge including conveyance from

2 stores to site work, labour, giving hyrdraulic testing 15 Mtr 598.00

including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores,

stacking etc, complete

80mm dia Medium Duty for delivery pipe

Providing, Supplying, Lowering, Laying and jointing

of ISI mark G.I. pipes (IS 1239) with couplings & GI

specials of following class and diameter in proper

position, grade and alignment as directed by

Engineer-In-Charge including conveyance from

stores to site work, labour, giving hyrdraulic testing

including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores,

stacking etc, complete

200 mm dia Medium Duty for Header pipe (Rate

for 150 mm pipe is 1355,so rate for 200mm is

Manufacture, supply and delivery of GI special

flange ended including all taxes. Upto 300 mm dia.

Supply at site, Storage, Erecting Istallation

Testing & commissioning of Bourdon type

pressure gauge, ± 1% Accuracy, direct bottom

1/2" ,NPT(M) process connection, IP

Glycerine filled SS304, Case with Bayonet type

Bezel, SS 316 L bourden tube, SS 316

Movement material Aluminium Dial with black

graduation on white background, Micro Zero

adjustable pointer, neoprene gasket, Blow out

disk,shatter proof glass, SS tag plate etc as per

IS 3624 (150 MM Dia) (of range 0 -10 kg/cm2

Supply at Site, Storage,Erection, Installation,

Testing & Commissioning of Both End Flanged

80 mm Ø C.I. Non rising Spindle Type Sluice

Valve of PN 1.0 with hand wheel opereted (pd

type short body) etc. Complete. including all

6 taxes, insurance, transportation, freight charges, 1 No. 2652.00

octroi, inspection charges, loading, unloading,

conveyance to departmental stores/site, stacking

etc. complete. 1no. for Delivery piping as per IS

14846 (Latest Edition) & Specification With ISI

Providing and supplying ISI marks CI D/F reflux valve as

per IS 5312(latest edition) of following class and

diameter including all

taxes,insurance,transporatation,freight

charges,octroi,inspection

charges,loading,unloading,conveyence to department

store,stacking etc.complete.

PN1.0,80 mm dia on delivery pipe

Supply at Site, Storage,Erection, Installation,

Testing & Commissioning of Both End Flanged

200 mm Ø C.I. Non rising Spindle Type Sluice

Valve of PN 1.0 with hand wheel opereted (pd

type short body) etc. Complete. including all

8 taxes, insurance, transportation, freight charges, 1 No. 9813.00

octroi, inspection charges, loading, unloading,

conveyance to departmental stores/site, stacking

etc. complete. 1no. for Delivery piping as per IS

14846 (Latest Edition) & Specification With ISI

Mark Only. (ON delivery Pipe)

Providing and supplying ISI marks CI D/F reflux valve as

per IS 5312(latest edition) of following class and

diameter including all

taxes,insurance,transporatation,freight

charges,octroi,inspection

charges,loading,unloading,conveyence to department

store,stacking etc.complete.

PN1.0,200 mm dia on header pipe

Supply, laying, testing & commissioning 1.1 kV

grade, XLPE insulated, stranded Aluminium

conductor, galvanised steel flat strip / round wire

armoured, extruded PVC type ST2 sheathed,

heavy duty cable (to be laid on wall surface with

10 necessary clamps / in existing cable trench / cable 20 mtr 102.00

trays / conduit / pipe sleeves at road crossing or

floor as per site requirement) (including cable

lugs,termination etc.) conforming to IS:

(Part-1) & IEC: 60502 (Part-1) of 4 Core X

sizes: - From SFU to change over switch

Supply of Approved make Iron Clad or metal

clad four pole change over switch 415V.

11 confirming to IS of following capacity 1 No. 12119.00

Changeover switch (100 A ) Cat - III on new

angle iron frame duly painted with red oxide

Supply, laying, testing & commissioning 1.1 kV

grade, XLPE insulated, stranded Aluminium

conductor, galvanised steel flat strip / round wire

armoured, extruded PVC type ST2 sheathed,

heavy duty cable (to be laid on wall surface with

12 necessary clamps / in existing cable trench / cable 20 mtr 102.00

trays / conduit / pipe sleeves at road crossing or

floor as per site requirement) (including cable

lugs,termination etc.) conforming to IS:

(Part-1) & IEC: 60502 (Part-1) of 4 Core X

sizes: - From change over switch to Panel

Auto transformer starter suitable for local & remote

pump control application consisting of

Auto Transformer (vacuum impregnated, air cooled

having three (3) tappings at 50%, 65%

and 80%), incomer MCCB / MPCB, overload relay and

contactors as per Type II coordination

including digital MFM with RS 485 communication port,

analogue type ammeter with selector

switch, run hour meter, required protective relays &

control accessories.(21 to 30 HP)

Supply, laying, testing & commissioning 1.1 kV

grade, XLPE insulated, stranded Aluminium

conductor, galvanised steel flat strip / round wire

armoured, extruded PVC type ST2 sheathed,

heavy duty cable (to be laid on wall surface with

14 necessary clamps / in existing cable trench / cable 40 mtr 80.00

trays / conduit / pipe sleeves at road crossing or

floor as per site requirement) (including cable

lugs,termination etc.) conforming to IS:

(Part-1) & IEC: 60502 (Part-1) of 3 Core X

sizes: - From control panel to Motor

Maintenance free Chemical Earting:For

SITC of UL Listed Maintenance Free Earting

System made of copper bonded rod of 10 feet

(3 mt approx.) length, 17.2mm dia. (Minimum

copper bonding shall be 0.25mm, suitable for

25 kA fault current) along with Rod-to-

conductor connectors, 95% pure Crabon-

Based Earth enhancement material of 30 kg,

pit cover as required and as per specification.

Providing and erecting required size HOT dip

Galvinized Strip of size 50 mm width X

mm thickness for earthing of

16 HT/OCB/ACB/Transformer/LT Panel 100 Kgs. 60.00

Board/Motors etc. using copper clamp for the

purpose of connecting panel body earth to

earth pit etc complete as per site requirement.

Liya Boosting station

For Vadadhra Village

SITC of Horizontal mono submersible pump set of

Cat SM-3.2 and accessories as per IS 14220/1994 &

latest revisions for 3 phase, 400/440 Vott, 50 C/s AC

Supply & 2900 RPM along with sand guard & cable (05

mtr length) etc. complete unit as per detailed technical

specifications & MOC :- Casing : CI -FG

Impeller : Bronze & Shaft : S.S:410 of following

capacity -(1000 lpm,24 mtr head,12.5 hp)

Providing, Supplying, Lowering, Laying and jointing

of ISI mark G.I. pipes (IS 1239) with couplings & GI

specials of following class and diameter in proper

position, grade and alignment as directed by

Engineer-In-Charge including conveyance from

2 stores to site work, labour, giving hyrdraulic testing 15 Mtr 864.00

including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores,

stacking etc, complete

100mm dia Medium Duty for delivery pipe

Providing, Supplying, Lowering, Laying and jointing

of ISI mark G.I. pipes (IS 1239) with couplings & GI

specials of following class and diameter in proper

position, grade and alignment as directed by

Engineer-In-Charge including conveyance from

3 stores to site work, labour, giving hyrdraulic testing 10 Mtr 1355.00

including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores,

stacking etc, complete

150mm dia Medium Duty for Heaer pipe

Manufacture, supply and delivery of GI special

flange ended including all taxes. Upto 300 mm dia.

Supply at site, Storage, Erecting Istallation

Testing & commissioning of Bourdon type

pressure gauge, ± 1% Accuracy, direct bottom

1/2" ,NPT(M) process connection, IP 67,

Glycerine filled SS304, Case with Bayonet type

Bezel, SS 316 L bourden tube, SS

Movement material Aluminium Dial with black

graduation on white background, Micro Zero

adjustable pointer, neoprene gasket, Blow out

disk,shatter proof glass, SS tag plate etc as per

IS 3624 (150 MM Dia) (of range 0 -10 kg/cm2

Supply at Site, Storage,Erection, Installation,

Testing & Commissioning of Both End Flanged

100 mm Ø C.I. Non rising Spindle Type Sluice

Valve of PN 1.0 with hand wheel opereted (pd

type short body) etc. Complete. including all

6 taxes, insurance, transportation, freight charges, 1 No. 3563.00

octroi, inspection charges, loading, unloading,

conveyance to departmental stores/site, stacking

etc. complete. 1no. for Delivery piping as per IS

14846 (Latest Edition) & Specification With ISI

Mark Only. no.15a)

Providing and supplying ISI marks CI D/F reflux valve as

per IS 5312(latest edition) of following class and

diameter including all

taxes,insurance,transporatation,freight

charges,octroi,inspection

charges,loading,unloading,conveyence to department

store,stacking etc.complete.

PN1.0,100 mm dia on delivery pipe

Supply at Site, Storage,Erection, Installation,

Testing & Commissioning of Both End Flanged

150 mm Ø C.I. Non rising Spindle Type Sluice

Valve of PN 1.0 with hand wheel opereted (pd

type short body) etc. Complete. including all

8 taxes, insurance, transportation, freight charges, 1 No. 5848.00

octroi, inspection charges, loading, unloading,

conveyance to departmental stores/site, stacking

etc. complete. 1no. for Delivery piping as per IS

14846 (Latest Edition) & Specification With ISI

Mark Only. (ON delivery Pipe)

Providing and supplying ISI marks CI D/F reflux valve as

per IS 5312(latest edition) of following class and

diameter including all

taxes,insurance,transporatation,freight

charges,octroi,inspection

charges,loading,unloading,conveyence to department

store,stacking etc.complete.PN1.0,150 mm dia on

Providing approved make Triple Pole Metal

Clad switch Fuse Unit 415/500 V with HRC

10 fuse of suitable load and neutral link confirming 1 NO 5755.00

Erection & connection charges for 125A HRC

11 (SFU) on New angle iron frame duly painted 1 NO 94.00 43.00

with red oxide.(parallel rate of 100A is taken)

Supply, laying, testing & commissioning 1.1 kV

grade, XLPE insulated, stranded Aluminium

conductor, galvanised steel flat strip / round wire

12 armoured, extruded PVC type ST2 sheathed, 20 mtr 72.00

heavy duty cable (to be laid on wall surface with

necessary clamps / in existing cable trench / cable

trays / conduit / pipe sleeves at road crossing or

floor as per site requirement) (including cable

lugs,termination etc.) conforming to IS:

(Part-1) & IEC: 60502 (Part-1) of 4 Core X 6.0 sizes:

- From SFU to change over switch

Supply of Approved make Iron Clad or metal

clad four pole change over switch 415V.

confirming to IS of following capacity

Changeover switch (63 A ) Cat - III on new

angle iron frame duly painted with red oxide

Supply, laying, testing & commissioning 1.1 kV

grade, XLPE insulated, stranded Aluminium

conductor, galvanised steel flat strip / round wire

armoured, extruded PVC type ST2 sheathed,

heavy duty cable (to be laid on wall surface with

14 necessary clamps / in existing cable trench / cable 20 mtr 72.00

trays / conduit / pipe sleeves at road crossing or

floor as per site requirement) (including cable

lugs,termination etc.) conforming to IS:

(Part-1) & IEC: 60502 (Part-1) of 4 Core X 6.0 sizes:

- From change over switch to Panel

SITC of star Delta Starter from 11 to 15 HP for local

& remote pump control application consisting of MPCB,

overload relay and contactors as per Type II coordination

including digital voltmeter,analogue ammeter with

15 selector switch, run hour meter, required protective 1 NO 11119.00

relays & control accessoriesThis item also includes

APP type suitable rating capacitor as per GWSSB

rate contract specifications.

Supply, laying, testing & commissioning 1.1 kV

grade, XLPE insulated, stranded Aluminium

conductor, galvanised steel flat strip / round wire

armoured, extruded PVC type ST2 sheathed,

heavy duty cable (to be laid on wall surface with

16 necessary clamps / in existing cable trench / cable 40 mtr 55.00

trays / conduit / pipe sleeves at road crossing or

floor as per site requirement) (including cable

lugs,termination etc.) conforming to IS:

(Part-1) & IEC: 60502 (Part-1) of 3 Core X 4.0 sizes:

- From control panel to Motor

Maintenance free Chemical Earting:For

SITC of UL Listed Maintenance Free Earting

System made of copper bonded rod of 10 feet

(3 mt approx.) length, 17.2mm dia. (Minimum

copper bonding shall be 0.25mm, suitable for

25 kA fault current) along with Rod-to-

conductor connectors, 95% pure Crabon-

Based Earth enhancement material of 30 kg,

pit cover as required and as per specification.

Providing and erecting required size HOT dip

Galvinized Strip of size 50 mm width X 12

18 mm thickness for earthing of 100 Kgs. 60.00

HT/OCB/ACB/Transformer/LT Panel

Board/Motors etc. using copper clamp for the

purpose of connecting panel body earth to

earth pit etc complete as per site requirement.

Providing Chain pulley block with tripple gear

arrangement, lifting hook, load chain & hand

19 chain & locking device & spur gear travelling 1 set 14400.00

trolley & all accessories with 6 mtr lift - 1 Ton

SITC of "I" Section Beam 150mm X 75mm X

8 mm(TW 5mm) - Structure Steel Required for

gentry girder arrangement for Loading /

Unloading of pump/Motor from / to floor of

pump house to / from Vehicle including

required Welding & foundation of Cement

Concerete & Painting as per requirement etc.

Assuming - 6 Mtr Verticle poe 4 Nos. & 6 Mtr.

Horizontal Fitting 4 No. 6X4 + 6X4 = 24+24 mtr

(I Section Beam Size-150mm X 75mm X 8 mm

Additional Bolt Nut foundation plate Etc.

Kg= Say 792 Kg.

For Liya Village

SITC of Horizontal mono submersible pump set of

Cat SM-2.10 and accessories as per IS 14220/1994 &

latest revisions for 3 phase, 400/440 Vott, 50 C/s AC

Supply & 2900 RPM along with sand guard & cable (05

mtr length) etc. complete unit as per detailed technical

specifications & MOC :- Casing : CI -FG

Impeller : Bronze & Shaft : S.S:410 of following

capacity -(700 lpm,70 mtr head,25 hp)

Providing, Supplying, Lowering, Laying and jointing

of ISI mark G.I. pipes (IS 1239) with couplings & GI

specials of following class and diameter in proper

position, grade and alignment as directed by

Engineer-In-Charge including conveyance from

2 stores to site work, labour, giving hyrdraulic testing 15 Mtr 598.00

including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores,

stacking etc, complete

80mm dia Medium Duty for delivery pipe

Providing, Supplying, Lowering, Laying and jointing

of ISI mark G.I. pipes (IS 1239) with couplings & GI

specials of following class and diameter in proper

position, grade and alignment as directed by

3 Engineer-In-Charge including conveyance from 10 Mtr 1143.00

stores to site work, labour, giving hyrdraulic testing

including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores,

stacking etc, complete

125 mm dia Medium Duty for Header pipe

Manufacture, supply and delivery of GI special

flange ended including all taxes. Upto 300 mm dia.

Supply at site, Storage, Erecting Istallation

Testing & commissioning of Bourdon type

pressure gauge, ± 1% Accuracy, direct bottom

1/2" ,NPT(M) process connection, IP

Glycerine filled SS304, Case with Bayonet type

Bezel, SS 316 L bourden tube, SS 316

Movement material Aluminium Dial with black

graduation on white background, Micro Zero

adjustable pointer, neoprene gasket, Blow out

disk,shatter proof glass, SS tag plate etc as per

IS 3624 (150 MM Dia) (of range 0 -10 kg/cm2

Supply at Site, Storage,Erection, Installation,

Testing & Commissioning of Both End Flanged

80 mm Ø C.I. Non rising Spindle Type Sluice

Valve of PN 1.6 with hand wheel opereted (pd

type short body) etc. Complete. including all

6 taxes, insurance, transportation, freight charges, 1 No. 2679.00

octroi, inspection charges, loading, unloading,

conveyance to departmental stores/site, stacking

etc. complete. 1no. for Delivery piping as per IS

14846 (Latest Edition) & Specification With ISI

Providing and supplying ISI marks CI D/F reflux valve as

per IS 5312(latest edition) of following class and

diameter including all

taxes,insurance,transporatation,freight

charges,octroi,inspection

charges,loading,unloading,conveyence to department

store,stacking etc.complete.

PN1.6,80 mm dia on delivery pipe

Supply at Site, Storage,Erection, Installation,

Testing & Commissioning of Both End Flanged

125 mm Ø C.I. Non rising Spindle Type Sluice

Valve of PN 1.6 with hand wheel opereted (pd

type short body) etc. Complete. including all

8 taxes, insurance, transportation, freight charges, 1 No. 4536.00

octroi, inspection charges, loading, unloading,

conveyance to departmental stores/site, stacking

etc. complete. 1no. for Delivery piping as per IS

14846 (Latest Edition) & Specification With ISI

Mark Only. (ON delivery Pipe)

Providing and supplying ISI marks CI D/F reflux valve as

per IS 5312(latest edition) of following class and

diameter including all

taxes,insurance,transporatation,freight

charges,octroi,inspection

charges,loading,unloading,conveyence to department

store,stacking etc.complete.

PN1.6,125 mm dia on header pipe

Supply, laying, testing & commissioning 1.1 kV

grade, XLPE insulated, stranded Aluminium

conductor, galvanised steel flat strip / round wire

armoured, extruded PVC type ST2 sheathed,

heavy duty cable (to be laid on wall surface with

10 necessary clamps / in existing cable trench / cable 20 mtr 102.00

trays / conduit / pipe sleeves at road crossing or

floor as per site requirement) (including cable

lugs,termination etc.) conforming to IS:

(Part-1) & IEC: 60502 (Part-1) of 4 Core X

sizes: - From SFU to change over switch

Supply of Approved make Iron Clad or metal

clad four pole change over switch 415V.

confirming to IS of following capacity

Changeover switch (100 A ) Cat - III on new

angle iron frame duly painted with red oxide

Supply, laying, testing & commissioning 1.1 kV

grade, XLPE insulated, stranded Aluminium

conductor, galvanised steel flat strip / round wire

armoured, extruded PVC type ST2 sheathed,

heavy duty cable (to be laid on wall surface with

necessary clamps / in existing cable trench / cable

12 trays / conduit / pipe sleeves at road crossing or 20 mtr 102.00

floor as per site requirement) (including cable

lugs,termination etc.) conforming to IS:

(Part-1) & IEC: 60502 (Part-1) of 4 Core X

sizes: - From change over switch to Panel

(GWSSB E&M SOR 2022-23, Sec - E, Pg 51, Item

Auto transformer starter suitable for local & remote

pump control application consisting of

Auto Transformer (vacuum impregnated, air cooled

having three (3) tappings at 50%, 65%

and 80%), incomer MCCB / MPCB, overload relay and

contactors as per Type II coordination

including digital MFM with RS 485 communication port,

analogue type ammeter with selector

switch, run hour meter, required protective relays &

control accessories.(21 to 30 HP)

Supply, laying, testing & commissioning 1.1 kV

grade, XLPE insulated, stranded Aluminium

conductor, galvanised steel flat strip / round wire

armoured, extruded PVC type ST2 sheathed,

heavy duty cable (to be laid on wall surface with

14 necessary clamps / in existing cable trench / cable 40 mtr 80.00

trays / conduit / pipe sleeves at road crossing or

floor as per site requirement) (including cable

lugs,termination etc.) conforming to IS:

(Part-1) & IEC: 60502 (Part-1) of 3 Core X

sizes: - From control panel to Motor

Maintenance free Chemical Earting:For

Pump and panel SITC of UL Listed

Maintenance Free Earting System made of

copper bonded rod of 10 feet (3 mt approx.)

length, 17.2mm dia. (Minimum copper bonding

shall be 0.25mm, suitable for 25 kA fault

current) along with Rod-to-conductor

connectors, 95% pure Crabon-Based Earth

enhancement material of 30 kg, pit cover as

required and as per specification.

Providing and erecting required size HOT dip

Galvinized Strip of size 50 mm width X

mm thickness for earthing of

HT/OCB/ACB/Transformer/LT Panel

Board/Motors etc. using copper clamp for the

purpose of connecting panel body earth to

earth pit etc complete as per site requirement.

Velala Boosting station

For junu rayasanpur Village

SITC of Horizontal mono submersible pump set of

Cat SM-2.5 and accessories as per IS 14220/1994 &

latest revisions for 3 phase, 400/440 Vott, 50 C/s AC

Supply & 2900 RPM along with sand guard & cable (05

mtr length) etc. complete unit as per detailed technical

specifications & MOC :- Casing : CI -FG

Impeller : Bronze & Shaft : S.S:410 of following

capacity -(498 lpm,32.5 mtr head,10 hp)

Providing, Supplying, Lowering, Laying and jointing

of ISI mark G.I. pipes (IS 1239) with couplings & GI

specials of following class and diameter in proper

position, grade and alignment as directed by

Engineer-In-Charge including conveyance from

2 stores to site work, labour, giving hyrdraulic testing 15 Mtr 598.00

including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores,

stacking etc, complete

80mm dia Medium Duty for delivery pipe

Providing, Supplying, Lowering, Laying and jointing

of ISI mark G.I. pipes (IS 1239) with couplings & GI

specials of following class and diameter in proper

position, grade and alignment as directed by

Engineer-In-Charge including conveyance from

3 stores to site work, labour, giving hyrdraulic testing 10 Mtr 864.00

including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores,

stacking etc, complete

100 mm dia Medium Duty for Header pipe

Manufacture, supply and delivery of GI special

flange ended including all taxes. Upto 300 mm dia.

Supply at site, Storage, Erecting Istallation

Testing & commissioning of Bourdon type

pressure gauge, ± 1% Accuracy, direct bottom

1/2" ,NPT(M) process connection, IP

Glycerine filled SS304, Case with Bayonet type

Bezel, SS 316 L bourden tube, SS 316

Movement material Aluminium Dial with black

graduation on white background, Micro Zero

adjustable pointer, neoprene gasket, Blow out

disk,shatter proof glass, SS tag plate etc as per

IS 3624 (150 MM Dia) (of range 0 -10 kg/cm2

Supply at Site, Storage,Erection, Installation,

Testing & Commissioning of Both End Flanged

80 mm Ø C.I. Non rising Spindle Type Sluice

Valve of PN 1.0 with hand wheel opereted (pd

type short body) etc. Complete. including all

6 taxes, insurance, transportation, freight charges, 1 No. 2652.00

octroi, inspection charges, loading, unloading,

conveyance to departmental stores/site, stacking

etc. complete. 1no. for Delivery piping as per IS

14846 (Latest Edition) & Specification With ISI

Providing and supplying ISI marks CI D/F reflux valve as

per IS 5312(latest edition) of following class and

diameter including all

taxes,insurance,transporatation,freight

charges,octroi,inspection

charges,loading,unloading,conveyence to department

store,stacking etc.complete.

PN1.0,80 mm dia on delivery pipe

Supply at Site, Storage,Erection, Installation,

Testing & Commissioning of Both End Flanged

100 mm Ø C.I. Non rising Spindle Type Sluice

Valve of PN 1.0 with hand wheel opereted (pd

type short body) etc. Complete. including all

8 taxes, insurance, transportation, freight charges, 1 No. 3563.00

octroi, inspection charges, loading, unloading,

conveyance to departmental stores/site, stacking

etc. complete. 1no. for Delivery piping as per IS

14846 (Latest Edition) & Specification With ISI

Mark Only. (ON delivery Pipe)

Providing and supplying ISI marks CI D/F reflux valve as

per IS 5312(latest edition) of following class and

diameter including all

taxes,insurance,transporatation,freight

charges,octroi,inspection

charges,loading,unloading,conveyence to department

store,stacking etc.complete.

PN1.0,100 mm dia on header pipe

Providing approved make Triple Pole Metal

Clad switch Fuse Unit 415/500 V with HRC

10 fuse of suitable load and neutral link confirming 1 NO 5755.00

Erection & connection charges for 125A HRC

11 (SFU) on New angle iron frame duly painted 1 NO 94.00 43.00

with red oxide.(parallel rate of 100A is taken)

Supply, laying, testing & commissioning 1.1 kV

grade, XLPE insulated, stranded Aluminium

conductor, galvanised steel flat strip / round wire

armoured, extruded PVC type ST2 sheathed,

heavy duty cable (to be laid on wall surface with

12 necessary clamps / in existing cable trench / cable 20 mtr 64.00

trays / conduit / pipe sleeves at road crossing or

floor as per site requirement) (including cable

lugs,termination etc.) conforming to IS:

(Part-1) & IEC: 60502 (Part-1) of 4 Core X 4.0 sizes:

- From SFU to change over switch

Supply of Approved make Iron Clad or metal

clad four pole change over switch 415V.

confirming to IS of following capacity

Changeover switch (63 A ) Cat - III on new

angle iron frame duly painted with red oxide

Supply, laying, testing & commissioning 1.1 kV

grade, XLPE insulated, stranded Aluminium

conductor, galvanised steel flat strip / round wire

armoured, extruded PVC type ST2 sheathed,

heavy duty cable (to be laid on wall surface with

14 necessary clamps / in existing cable trench / cable 20 mtr 64.00

trays / conduit / pipe sleeves at road crossing or

floor as per site requirement) (including cable

lugs,termination etc.) conforming to IS:

(Part-1) & IEC: 60502 (Part-1) of 4 Core X 4.0 sizes:

- From change over switch to Panel

SITC of star Delta Starter from 8 to 10 HP for local

& remote pump control application consisting of MPCB,

overload relay and contactors as per Type II coordination

including digital voltmeter,analogue ammeter with

15 selector switch, run hour meter, required protective 1 NO 9128.00

relays & control accessoriesThis item also includes

APP type suitable rating capacitor as per GWSSB

rate contract specifications.

Supply, laying, testing & commissioning 1.1 kV

grade, XLPE insulated, stranded Aluminium

conductor, galvanised steel flat strip / round wire

armoured, extruded PVC type ST2 sheathed,

heavy duty cable (to be laid on wall surface with

16 necessary clamps / in existing cable trench / cable 80 mtr 55.00

trays / conduit / pipe sleeves at road crossing or

floor as per site requirement) (including cable

lugs,termination etc.) conforming to IS:

(Part-1) & IEC: 60502 (Part-1) of 3 Core X 4.0 sizes:

- From control panel to Motor

Maintenance free Chemical Earting:For

SITC of UL Listed Maintenance Free Earting

System made of copper bonded rod of 10 feet

(3 mt approx.) length, 17.2mm dia. (Minimum

copper bonding shall be 0.25mm, suitable for

25 kA fault current) along with Rod-to-

conductor connectors, 95% pure Crabon-

Based Earth enhancement material of 30 kg,

pit cover as required and as per specification.

Providing and erecting required size HOT dip

Galvinized Strip of size 50 mm width X

mm thickness for earthing of

18 HT/OCB/ACB/Transformer/LT Panel 100 Kgs. 60.00

Board/Motors etc. using copper clamp for the

purpose of connecting panel body earth to

earth pit etc complete as per site requirement.

Providing Chain pulley block with tripple gear

arrangement, lifting hook, load chain & hand

19 chain & locking device & spur gear travelling 1 set 14400.00

trolley & all accessories with 6 mtr lift - 1 Ton

SITC of "I" Section Beam 150mm X 75mm X

8 mm(TW 5mm) - Structure Steel Required for

gentry girder arrangement for Loading /

Unloading of pump/Motor from / to floor of

pump house to / from Vehicle including

required Welding & foundation of Cement

Concerete & Painting as per requirement etc.

Assuming - 6 Mtr Verticle poe 4 Nos. & 6 Mtr.

Horizontal Fitting 4 No. 6X4 + 6X4 = 24+24 mtr

(I Section Beam Size-150mm X 75mm X 8 mm

Additional Bolt Nut foundation plate Etc.

Kg= Say 792 Kg.

For Nava rayasanpur Village

SITC of Horizontal mono submersible pump set of

Cat SM-2.9 and accessories as per IS 14220/1994 &

latest revisions for 3 phase, 400/440 Vott, 50 C/s AC

Supply & 2900 RPM along with sand guard & cable (05

mtr length) etc. complete unit as per detailed technical

specifications & MOC :- Casing : CI -FG

Impeller : Bronze & Shaft : S.S:410 of following

capacity -(440 lpm,52 mtr head,15 hp)

Providing, Supplying, Lowering, Laying and jointing

of ISI mark G.I. pipes (IS 1239) with couplings & GI

specials of following class and diameter in proper

position, grade and alignment as directed by

Engineer-In-Charge including conveyance from

2 stores to site work, labour, giving hyrdraulic testing 15 Mtr 460.00

including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores,

stacking etc, complete

65mm dia Medium Duty for delivery pipe

Providing, Supplying, Lowering, Laying and jointing

of ISI mark G.I. pipes (IS 1239) with couplings & GI

specials of following class and diameter in proper

position, grade and alignment as directed by

Engineer-In-Charge including conveyance from

3 stores to site work, labour, giving hyrdraulic testing 10 Mtr 864.00

including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores,

stacking etc, complete

100 mm dia Medium Duty for Header pipe

Manufacture, supply and delivery of GI special

flange ended including all taxes. Upto 300 mm dia.

Supply at site, Storage, Erecting Istallation

Testing & commissioning of Bourdon type

pressure gauge, ± 1% Accuracy, direct bottom

1/2" ,NPT(M) process connection, IP

Glycerine filled SS304, Case with Bayonet type

Bezel, SS 316 L bourden tube, SS 316

Movement material Aluminium Dial with black

graduation on white background, Micro Zero

adjustable pointer, neoprene gasket, Blow out

disk,shatter proof glass, SS tag plate etc as per

IS 3624 (150 MM Dia) (of range 0 -10 kg/cm2

Supply at Site, Storage,Erection, Installation,

Testing & Commissioning of Both End Flanged

65 mm Ø C.I. Non rising Spindle Type Sluice

Valve of PN 1.6 with hand wheel opereted (pd

type short body) etc. Complete. including all

6 taxes, insurance, transportation, freight charges, 1 No. 2384.00

octroi, inspection charges, loading, unloading,

conveyance to departmental stores/site, stacking

etc. complete. 1no. for Delivery piping as per IS

14846 (Latest Edition) & Specification With ISI

Providing and supplying ISI marks CI D/F reflux valve as

per IS 5312(latest edition) of following class and

diameter including all

taxes,insurance,transporatation,freight

charges,octroi,inspection

charges,loading,unloading,conveyence to department

store,stacking etc.complete.

PN1.6,65 mm dia on delivery pipe

Supply at Site, Storage,Erection, Installation,

Testing & Commissioning of Both End Flanged

100 mm Ø C.I. Non rising Spindle Type Sluice

Valve of PN 1.6 with hand wheel opereted (pd

type short body) etc. Complete. including all

8 taxes, insurance, transportation, freight charges, 1 No. 3598.00

octroi, inspection charges, loading, unloading,

conveyance to departmental stores/site, stacking

etc. complete. 1no. for Delivery piping as per IS

14846 (Latest Edition) & Specification With ISI

Mark Only. (ON delivery Pipe)

Providing and supplying ISI marks CI D/F reflux valve as

per IS 5312(latest edition) of following class and

diameter including all

taxes,insurance,transporatation,freight

charges,octroi,inspection

charges,loading,unloading,conveyence to department

store,stacking etc.complete.

PN1.6,100 mm dia on header pipe

Supply, laying, testing & commissioning 1.1 kV

grade, XLPE insulated, stranded Aluminium

conductor, galvanised steel flat strip / round wire

armoured, extruded PVC type ST2 sheathed,

heavy duty cable (to be laid on wall surface with

10 necessary clamps / in existing cable trench / cable 20 mtr 91.00

trays / conduit / pipe sleeves at road crossing or

floor as per site requirement) (including cable

lugs,termination etc.) conforming to IS:

(Part-1) & IEC: 60502 (Part-1) of 4 Core X

sizes: - From SFU to change over switch

Supply of Approved make Iron Clad or metal

clad four pole change over switch 415V.

11 confirming to IS of following capacity 1 No. 3967.00

Changeover switch (63 A ) Cat - III on new

angle iron frame duly painted with red oxide

Supply, laying, testing & commissioning 1.1 kV

grade, XLPE insulated, stranded Aluminium

conductor, galvanised steel flat strip / round wire

armoured, extruded PVC type ST2 sheathed,

heavy duty cable (to be laid on wall surface with

12 necessary clamps / in existing cable trench / cable 20 mtr 91.00

trays / conduit / pipe sleeves at road crossing or

floor as per site requirement) (including cable

lugs,termination etc.) conforming to IS:

(Part-1) & IEC: 60502 (Part-1) of 4 Core X

sizes: - From change over switch to Panel

SITC of star Delta Starter from 11 to 15 HP for local

& remote pump control application consisting of MPCB,

overload relay and contactors as per Type II coordination

including digital voltmeter,analogue ammeter with

13 selector switch, run hour meter, required protective 1 NO 11119.00

relays & control accessoriesThis item also includes

APP type suitable rating capacitor as per GWSSB

rate contract specifications.

Supply, laying, testing & commissioning 1.1 kV

grade, XLPE insulated, stranded Aluminium