WBPWD/EE/BED/e-NIQ-52/2025-26

Amount

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling.

Supply & Fixtng of Computer board (Modular typel:- Supply & Fixing 240 V, 3 nos.6A, & 1 no.20A Modular type plug socket with separate 3 nos. 6 A & 1 no. 20A Modular type switch, indicator & 20A Modular type SP MCB 25A on 2 row 12 Module GI Modular type switch board with 2 row 12 Module top cover plate flushed in wall incl.S&Fswitchboard and cover plate and maling necy. connections with PVC Cu wire and earth continuity wire etc.(Legrand Myrius/ Crabtree/ Siemens).

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supplying and fixing 2 Way MCB SS enclosure with IP-20/30 protection, powder coated including S/F 32A DP (two pole) MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment.(Make : Legrand).

Supply and Fixing of Junction box (250x200x105mm) with Front side opening door and Earth stud,locking arrangement with clamp (Mk- Syntex- GSJB2520 /equivalent). Junction box having following accessories: 2W ay 32A Stud type power Terminal- 1 no(Mk.- Reputed) 6A SP MCB C- curve, 10KA, (Make : L&T/legrand/ABB) -l no

S & F Trner Control unit for 1 Ph AC machines with 12-way SPN DB Box(Mk.- L& T/Crabtree/ kgrand/Siemens/ABB). 12 way SPN DB or Timer DB- I no 40A DP MCB Isolator-1 no Digital 24 hrs.Time switch- I no 324 2-pole power contactor-1no Centre off 2-way toggle switch-1 no 32A Barrier type Terminal -1 no LED indicating lamp-1 no 2x4+1x2.5 Sq.mm Cu wire(Gloster /KEI/RR Kabel)

S & F Timer Control unit for Compound Ltght with l2-way SPN DB Box(Mk.- L & T I Cr abtree I Legrand/ Siemens/ABB) : 12 way SPN DB or Timer DB- I no 40A DP MCB Isolator-l no DieltaJ24 hrs.Time switch-1 no 25A 2 pole power contactor-1no Centre off 2-way toggle switch-1 no 32A Barrier type Terminal -1 no LED lndicating lamp-2 no 2x4+1x2.5 Sq.mm Cu wire(Gloster /KEI/ RR Kabel)

Supply and fixing of OLP3+ 25A single phase AC starter on 4 module GI box with supply & fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), with 25A modular type plug top with indicator and switch with 2 Module GI Modular type switch board widl top cover ptate flushed in wall and making necy.connection wire PVC Cu wire and earth continuity wire as per direction of EIC.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. i) 4 x 84/0.3 (6 sqmm) + 2 x 56/0.3 (4 sqmm) ECC

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy.fittings as required. i) 2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC

ii) 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC

iii) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

iv)2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. a) 3 x 22/0.3 (1.5 sqmm)

b) 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

c) 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC

d) 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC

e) 4x84/0.3 (6 sqmm) + 2x56/0.3 (4 sqmm) as ECC

f) 4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. i) 2.5sqmm

ii) 4 sqmm

iii) 6 sqmm

iii) 10 sqmm

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works. a) 25mm size

b) 20mm size

Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles. a) 19 mm dia 3 mm thick polythene pipe without earth continuity wire.

Cutting channel of 43 mm x 43 mm size on masonry wall incl.S&F heavy gauge 25 mm dia 3 mm thick polythene pipe(without earth continuity wire), by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works.

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish. Average run 8 mtr.

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish. Average run 8 mtr.

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works i) 4 Module

ii) 6 Module

iii) 8 Module

iv) 12 Module

Supplying and fixing double-door 2+8 way (Enclosure (607711)) SPN MCB Distribution Board with IP-42/43 protection, with 01 no. DP 40A MCB isolator as incommer and 8 nos 6A -10A SP MCB as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (SPN DB, MCB & isolator all make : Legrand)

Supplying and fixing double door 4 way(Enclosure (607715)) Horizontal TPN MCB Distribution board with IP-42/43 protection, with 01 no. FP 63A MCB isolator as incommer and 12 nos 16A -32A SP MCB as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (HTPN, MCB & isolator all make : Legrand)

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type 125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Supply and delivery of 4 feet Industrial type single LED tube fitting with 1 no. LED tube [Make- Philips, TMC 502 1xTLED/ Crompton/ Bajaj/ Wipro/ Jaquar/ Panasonic; and 01 no.18 watt LED tube light (6500K)(Philips Mas LEDTube 1200mm 18W 865 T8 I – 2100lm).

Supply and delivery of 4 feet Industrial type twin LED tube fitting with 2 nos. LED tube [Make- Philips, TMC 502 1xTLED/ Crompton/ Bajaj/ Wipro/ Jaquar/ Panasonic; and 02 nos.18 watt LED tube light (6500K)(Philips Mas LEDTube 1200mm 18W 865 T8 I – 2100lm). ]

Supply and delivery 1.1 KV grade XLPE insulated stranded Alumunium conductor galvanised steel armoured cable of the following sizes. Make : Havells / Gloster / Polycab). (i) 2 core x 10 sq.mm.

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed. (i) 2 core x 10 sq.mm.

Supply and delivery 1.1 KV grade XLPE insulated stranded Alumunium conductor galvanised steel armoured cable of the following sizes. Make : Havells / Gloster / Polycab) (i) 4 core 16 sq.mm.

Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed (i) 4 core 16 sq.mm.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : a) 2 core 10 sqmm.

b) 4 core 16 sqmm.

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : a) 4 core 16 sqmm.

b) 4 core 16 sqmm.

Straigh through Jointing of cable of different size by compound jointing kit including S&F ferrul, tapes and jointing materials (Brand approved by EIC) as to GS. 4 core 185 sqmm cable

4 core 120-150 sqmm cable

4 core 95 sqmm cable

4 core 70 sqmm cable

Bituminious Road cutting by using Jac Hamour Compressor Machine, Fuel, Mobil, Compressor Operator and Three Breaker.

Supply of MK1 DOL Starters [HSN Code 8536] for 7.5 H.P. Relay 11-18A (L&T SS96211POCO)

Supply of MK1 MK1 FASD S tarters [HSN Code 8536] for 10 H.P. Relay 11-18A (L&T SS96257POCO)

Fixing only starters (for motor control) on angle iron frame on wall as below: a) Direct on Line starter for motor (upto 5 HP).

b) Star-Delta starter for motor (above 5 HP upto 15 HP).

Providing CC (6:3:1) muffing 0.3 mtr dia upto the height of 0.3 mtr. above the ground level around the pole base complete with 3 mm thick neatly finished cement plaster all-round after dismantling the unserviceable muffing if necessary. Note : 1) Suitable quantity of Common / Regular EI materials like wires, Pipes, modular type switches, sockets, MCB of different ratings, modular type switch boards, LED fittings, LED driver, cable jointing kit etc. should be stored at site by the Agency in advance with his own responsibility to overcome emergency situations. 2) Works through requisition (i.e, Regular work) should be started within 16 hrs & the emergency breakdown works should be started within 4 hrs with requisite manpower after getting the information either from site or from office. Each individual work must be completed with minimum executing time as per site requirement. 3) The Agency must submit the details of communicating person in this regard along with his Mobile number & Email id.

Note:- Rate should be quoted inclusive of all taxes and duties including GST.

HALDAR ENTERPRISE (BID ID -6808570)

M/S SAMRIDDHI ELECTRO & CO. (BID ID -6827778)

GANAPATI DEBA & CO (BID ID -6827855)

RAI ENTERPRISE (BID ID -6805245)