WBPWD/BSTD/EE/NIQ02e/24-25/1

Amount

Supply Installation, Testing & Commissioning of MS Pipe up to 150 NB as per IS: 1239, part-I (Heavy Grade) and 200 NB and above as per IS: 3589, thk 6.3 mm with fittings with structural support and paint as per IS: 5 (shade: 536) . For under ground piping 4mm thk wrapping and coating shall be applicable. 200 NB

Supply Installation, Testing & Commissioning of CI Sluice Valve with fittings 200 NB

Supply Installation, Testing & Commissioning of CI swing check type Non-Return Valve as per IS: 5312 with fittings 150 NB

Supply Installation, Testing & Commissioning of SS single headed Hydrant Valve as per IS : 5290, type-A with fittings

Supply Installation, Testing & Commissioning of SS Branch pipe with nozzle(19mm) as per IS: 903 with fittings

Supply Installation, Testing & Commissioning of 15 mtr long RRL Hose as per IS: 636 with fittings

Supply Installation, Testing & Commissioning of Hose box fabricated from 16 SWG MS sheet (IS: 513) size: 750 X 600 X 250 mm with 3mm thk glass and fittings

Supply Installation, Testing & Commissioning of Pressure Gauge 150mm dial with half coupling, nipple, root valve adaptor, 3 waygauge cock, vibration damper as per standard guideline.

Supply Installation, Testing & Commissioning of CI Air release valve (25NB) with CI isolation valve with fittings

Supply Installation, Testing & Commissioning of SS Ball valve(25NB) with fittings

Maintenance & Overhauling of Electric Motor driven Horizontal centrifugal Fire pump and Jockey pump of existing make with coupling & coupling guard, base frame as necessay foundation in all complete as per specification and direction of the engineer In-Charge (TEFC Motor & Bronze impeller)

Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steelcomplete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst ) with branch line (inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete asrequired. 1000 mm

Maintenance & Overhauling of Diesel Engine driven Horizontal centrifugal Fire stand-by pump of existing make , repairing / replacing with new (if necessary) coupling & coupling guard, base frame, Cylinder Liner, Liner 'O' Ring, Piston Ring, Cylinder Head Gaskit, Engine Gasket, Fuel pipe, Filter Kit, Push Rod, Copper washer as necessay foundation in all complete as per specification and direction of the engineer In-Charge. a) Greasing of Engine and pumps is included in the contractor scope. b) Consumption of Diesel for running of Engine as demand to keep the engine in good condition is included in the contractor scope. c) Repairing of Cylinder Head, Valve and Valve Guide opening, Fittings, Machining and valve Grandinng included in the contractor scope d) Repairing and caliberation of Fuel pump injector Nozzle , Turbocharger including replacement of worn out parts included in the contractor scope.

Supplying trained and qualified manpower round the clock for operation of installed Fire pumps, Fire network (Hydrant & Sprinkler system) as per routine checking and situation demands. The Job includs cheaking of all valves & other instruments. installed inside the pump house and in network of Basirhat District Hospital (New & Old Building). a) Every labours engaged with this work must be paid with minimum wages as laid down in the existing labour department order. For 365 days. Quantity 1 job

NILEX FIRE PROTECTION SYSTEMS

DISCERN CONSTRUCTION & SAFETY SOLUTIONS PRIVATE LIMITED

SREE MAA ENTERPRISES

BALAJI FIRE PROTECTION SYSTEMS