TSM-Sabarimala-Supplying and Installation RO Plant at Sannidhanam and Construction of Operator Room

Amount

Appendix I- Supplying & installation of RO plant at Sannidhanam Supplying providing & installing MULTIPORT VALVE - NB (F) T -

Supplying and providing & installing DUEL MEDIA FILTER, polyglass Vessel - 3072 code,12m3/hour capacity to size of 770mm dia X 1815 height FRP made.

Supplying and providing & installing ACTIVATED CARBON FILTER Polyglass Vessel – 3072 Capacity : 12 M3/hr Size : 770 Dia x 1815 Ht - FRP made

Supplying and providing & installing - e-Dose Metering Pump - For Antiscalant Dosing

Supplying and providing & installing -50 Lt HDPE Tank - For Antiscalant Dosing

Supplying and providing & installing - 20" Jumbo Hou with Sw Cartridge - 5 Micron Jumbo

Supplying and providing & installing - Pressure Gauge Gly-Filled - 0-7 Kg, 2 1/2" Dial

Supplying and providing & installing -Pressure Gauge Gly-Filled - 0-28 Kg, 2 1/2" Dial

Supplying and providing & installing -Aster Rotameter F1200E - For Feed Or Reject

Supplying and providing & installing- Membrane Housing - 8" Single Element FRP Alfa

Supplying and providing & installing HIGH PRESSURE PUMP Capacity : 10 M3/hr -

Supplying and providing & installing Astero Mimic Panel -11 - Control Panel

Supplying and providing & installing LOW / HIGH PRESSURE SWITCH Capacity : 10 M3/hr -

Supplying and providing & installing FLOATY LEVEL SWITCH - FOR TREATED WATER

Supplying and providing & installing Flimtec Membrane -8" -

Supplying and providing & installingFILTER FEED PUMP Capacity : 10 M3/hr - Lubi

Supplying and providing & installing- REVERSE OSMOSIS UNIT Type : Skid Mounted Capacity : 5000 LPH -Film Tech

Supplying and providing & installing - SMBS Dosing System -

Supplying and providing & installing Chemical Washing Tank -

Supplying and providing & installing -Chemical Washing Pump -

Supplying and providing & installing BACK WASH PUMP Capacity : 10 M3/hr - Lubi

Supplying and providing & installing UV Disinfection Capacity : Max. 6000 LPH - Uv Plasma Make

Supplying and providing Pebbles - 25mm

Supplying and providing Silex Sand

Supplying and providing Fine sand -0.45mm to 0.70mm

Supplying and providing Activated Carbon

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.25 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 40 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm nominal outer dia Pipes

Polyethylene water storage tank with cover and suitable locking arrangement

Supplying and providing & installing Skid - SS - 304

Supplying and providing & installing Scaddle Bush - SS

Supplying and providing & installing Solenoid Valve - 1 inch

Appendix II- Construction of operator room Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.80 mm thick with zinc coating not less than 275 gm/m²

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.80 mm thick with zinc coating not less than 275 gm/m²

Solid block masonry using precast solid block (factory made) of size 30X20X15 cm or nearest avalable size conforming to IS 2185 part 1 of 1979 for super structure upto floor two level with thickness 15 cm in CM 1:6(1 cement : 6 course sand ) etc. complete.

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 50 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall20 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External work100 mm nominal inner dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External work.

Aqua Purification Technology

P M SIVADAS

HARIDAS PANTHAPLACKAL MADHAVANPILLAI