Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.2 LAccepted-AOC 234 PKT 8 SEC 12 SURYODAYA APARTMENT DWARKA NEW DELHI 110075 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110075 | L1 | Accepted-AOC L1 AND REASONABLE | |
| 2 | L2₹21.3 L+₹48,613.34 (2.33%)Rejected-Finance MAHARAJA SOCIETY HAPA YARD ROAD NR ALFA PAN STREET NO 6 O S KALWADGET JAMNAGAR GUJ | L2 | Rejected-Finance NOT L1 | |
| 3 | L3₹22.5 L+₹1.6 L (7.86%)Rejected-Finance INDEX NO B 107 HQ CE WC 234 PKT 8 SEC 12 SURYODAYA APARTMENT DWARKA NEW DELHI 110078 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110078 | L3 | Rejected-Finance NOT L1 |
Tender Value
₹20.5 L
EMD Value
₹41,000
Closing Date
5 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE A JAMNAGAR
INFANTRY LINES JAMNAGAR
SPL REPAIRS TO BLDG NO NP-11 OF NO-1 INF BN AT MIL STN JAMNAGAR (05/SRW(BUILDING)/JAM/23-24)
2023_MES_612686_2
8015
Open Tender
Civil Works
Item Rate
274 days
JAMNAGAR
AS PER TENDER DOCUMENTS
6 documents required · 6 mandatory
₹500
GE ARMY JAMNAGAR
₹41,000
30 Oct 2023
14 Sept 2023
7 Oct 2023
15 Sept 2023
5 Oct 2023
20 Sept 2023
Amount
Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.
S&F High tensile galvalume sheets colour coated single skin high rib / multi rib TMP Profile Galvalume sheeting in roof having 1000-1020 mm width 28 mm high crest @ maximum 250 mm pitch (centre to centre) and minimum 190mm manufactured out of 0.50 mm TCT (total coated thickness) cold rolled steel, having yield strength 550MPa minimum and wall coated with 25 micron modified polyester paint system applied on Zincalume on top and with back coating on sheet shall be 7-10 micron epoxy paint. The sheet shall be supplied in length maximum upto 6-12 meters long to suit with structural dimensions and fixed with self tapping screws with built in gasket (with bitumen washer) of suitable size machine fixed as per manufacturer instructions and applying adhesive compound to joint overlap of sheets complete all as specified and directed by Engineer-in-Charge.
S&F High tensile galvalume sheets colour coated single skin plain Galvalume sheeting in ridge and cladding having 1000-1020 mm width manufactured out of 0.50 mm TCT (total coated thickness) cold rolled steel, having yield strength 550MPa minimum and wall coated with 25 micron modified polyester paint system applied on Zincalume on top and with back coating on sheet shall be 7-10 micron epoxy paint. The sheet shall be supplied in length maximum upto 6-12 meters long to suit with structural dimensions and fixed with self tapping screws with built in gasket (with bitumen washer) of suitable size machine fixed as per manufacturer instructions and applying adhesive compound to joint overlap of sheets complete all as specified and directed by Engineer-in-Charge.
Taking down wooden roof trusses, coupled rafters or trussed beams clear span above 8 metres to 12 metres complete all as specified and as directed.
Dismantling timber scantlings 40 sq. cm and over in section, in any position unframed work complete all as specified and as directed
Demolition of Brickwork or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
M&L Providing cement concrete 1:2:4, type B-1 using (20 mm graded aggregate) as in coping apex stones, bed plates, kerbs, slightly rounded or chamfered angles and throating complete all as specified and directed.
S&F steel work in tubular trusses (Hollow/rectangular section) including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 4923 garde Yst-310. complete all as specified and directed.
S&F mild steel rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails , fixed with angle cleats or other connecting plates, gusset plates, etc conforming to Gde Fe-410-W (Gde E- 250) quality 'A' complete all as specified & directed.
S&F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Gde Fe-410-W (Gde E- 250) quality 'A' complete all as specified and directed.
S&F mild steel work as in band straps, supports or stays for rain water ,ventilating pipes, including bolts, if required; clamps , wall tie, hooks , angle cleats ,hold fast etc and similar small articles conforming to Fe 290, grade E-165 complete all as specified.
S&F 16mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 2.5cm and n exc 30cm long complete all as specified and as directed
M & L for preparation of new steel or iron surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete
S&F False ceiling work comprising GI frame work of size 605 x 605mm, for seamless celling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx. 900mm centre to centre with GI cleat and steel expansion fasteners with and incl ceiling section (not exc 1.2m length) of 0.55mm thickness having knurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre including hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long and 4mm thick Non asbestos fibre cement building boards (E-boards) fixed or laid/ inserted to timber/GI/Aluminium framework with screws as in ceiling , including taking down old false ceiling including frame work and hangers, complete all as specified and as directed.
Taking down and refixing the existing ceiling board in same frame work complete all as specified and as directed
Demolition of (reinforced) cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
M & L for RCC (nominal mix ) 1:1.5:3(using 20mm graded stone aggregate), as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.
Use and waste of formwork to sides and soffits of floor or roof beams, beams with rough finished surfaces of concrete in flat complete all as specified and directed.
S & F TMT steel deformed or twisted bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including MS wire (annealed) not less than 0.9mm dia or securing with clips.
M&L TMT bars 6 to 8 mm dia and over cut to length, bent to shape required incl cranking, bending, spirally for hooping for column hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc. confirming to Fe-410-S or Fe-410-0.
S & F TMTsteel deformed or twisted bars, 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including MS wire (annealed) not less than 0.9mm dia or securing with clips.
Taking down wooden door/window chowkat or frames exc 1.5 Sqm but n exc 4 Sqm each but with shutters (without taking off shutters from the frames) complete all as specified and directed.
Taking down wooden window/ventilators chowkat or frames n.exc 1.5 Sqm each but with shutters (without taking off shutters from the frames) complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for window grills etc complete all as specified and as directed.
S&F Framed work such as grills,gratings, such as gates etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
S&F Pressed steel frames of size 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including one shop coat of primer complete all as specified and directed.
S&F Factory made solid PVC door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed.
S&F Factory made35mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides of covered with decorative face veneer and lipping / with teak wood beading 6mm thick complete all as specified and as directed.
M&L plain cement concrete 1:2:4, type B-0 using (12.5 mm graded aggregate) in door frames, any size complete all as specified and directed.
S&F SS butt hinges cold rolled medium weight, 100mm size complete all as directed
S&F Extruded aluminium alloy handles 150mm long, fabricated type, anodised, complete all as specified and as directed.
S&F Aluminium anodised barrel tower bolts, 200 mm long, of extruded section, complete all as specified and as directed.
S&F Aluminium anodised barrel tower bolts, 150 mm long, of extruded section, complete all as specified and as directed.
S&F 250 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and as directed.
S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring and vulcanised rubber piece fixed on door, over all length of cover plate 140mm all as specified and directed
S&F Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each of 2nd class hardwood complete all as specified and as directed.
S&F 50mm butt hinges, medium weight, stainless steel complete all as specified and directed.
M&L preparation of new untreated Steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
M&L preparation of new untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F Anodised powder coating (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.
S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.
S&F 5.5 mm sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as direcetd.
M&Lfor double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as pecified and as directed.
S&F Powder coated aluminium anodised sliding window of 3 track, frame and shutters of section (a) Three Track Frame:- (i)Bottom - 20832 (ii)Top/side – 20831 (b) Shutter:- (i)Bottom – 20736 (ii)Top/Side – 20738 (iii) interlocke - 20737 or appropriate equivalent section fixed with 4.8 mm thick tinted sheet glass and rubber gasket, handles, locking arrangement and SS wire mesh SS wire cloth 0.36mm dia of wire and average width of aperture 1.40mm, including making opening for handle & fittings, fixed with complete all as specified and as directed by Engineer-in-Charge. NOTE : (ii) Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, etc (iii).comprising frames of (Jindal aluminium section or equivalent as specified) roller bearing, rubber beading, consealed lock.
S&F in coloured aluminium anodised adjustable louvered ventilator, frame of section 63.5mm X 38.1mm X 1.47 mm or higher appropriate equivalent section with aluminium adjustable lovers with 4 mm thick figured/frosted sheet glass with rubber gasket, SS wire cloth 0.36mm dia of wire and average width of aperture 1.40mm incl necessary channel frame work, handles, locking arrangement etc complete all as specified and directed by the Engr-in-Charge. Note Quoted rates shall include all glazing / SS wire cloth, rubber packing,jointing,cleat, glazing , snap beading etc.
M&L 18-20 mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, incl 20 mm thick screed bed in CM 1:4 all as specified and as directed by Engr-in-charge.
M&L Rounding to edges of granite slabs one edge,such as in window cill, cooking platform, and other similar situations including grinding polishing complete all as specified and as directed.
Demolition of Stone slabs and tiles (interlocking paver block) laid dry of any description or thickness in floors, aprons et etc complete all as specified and as directed.
Demolition of cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L 40 mm thick PCC type B-1, 1:2:4 (20mm graded aggregate) as in floor complete all as specified and directed.
M&L 25 mm thick PCC type B-1, 1:2:4 (20mm graded aggregate) as level course complete all as specified and directed.
M&L coloured, non-skid ceramic tiles 7 to 8mm thick (square / rectangular ) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L coloured Glazed ceramic tiles in vertical surface 450mm X 300mm X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & including 10 mm thick plaster in CM 1:4 complete all as specified and directed.
M&L 75 mm thick Cement concrete 1:3:6, type C-2 using (40 mm graded aggregate) as in plinth protection complete all as specified and directed.
Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade 'A' complete all as specified and directed.
M&L for hard core of broken stone boulder of gauge not exceeding 63mm, deposited spread level and layers not exceeding 15cm thick, watered and rammed true surface complete all as sprcified and as directed.
M&L for 75mm thick plain cement concrete type D2, 1:4:8 (using 40 mm graded stone aggregate) as in sub base of path, hardstanding, etc complete all as specified and as directed.
M&L for machine pressed precast concrete interlocking paver block any shape and size jointed and pointed with gray/colour cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 grade including 50mm thick sand for cushioning complete all as specified and as directed.
M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry grey cement and pigment in floors including 20mm screed bed in CM 1:6 complete all as specified and as directedcomplete all as specified and as directed.
S&F in repair SS Curtain Rod Decorative pattern 25 mm dia complete all as specified and directed.
S&F SS Curtain Rod Bracket decorative type suitable for 25 mm dia curtain rod complete all as specified and directed.
Taking up/down GI tubing and connections 15 mm size of pipes including all fittings complete all as specified and directed.
Taking up/down GI tubing and connections 20 mm size of pipes including all fittings complete all as specified and directed.
Supplying and laying of 20 mm dia.(outer dia.) CPVC pipes SDR 11 with plain CPVC SDR 11 fittings jointed with CPVC adesive taflon tape complete to walls/ceiling or laying in floors including all connected brass CPVC fitting complete all as specified.
Supplying and laying of 25 mm dia.(outer dia.) CPVC pipes SDR 11 with plain CPVC SDR 11 fittings jointed with sealant solvent leak proof on walls/ceiling or laying in floors including all connected brass CPVC fitting complete all as specified.
S&F Vitreous China wash down water closet (Pedestal pattern) white with concealed S-Trap/P-trap, 360mm wide, 390mm high and 415 to 445mm long at top including fixing bolt, Plastic water closet seat cover white closed pattern with recessed bottom and cover and mild steel chromium plated hinging device including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete, fixed in repairs, complete all as specified and directed.
S&F in repairs health faucet ,brass spray shower with knob with 1.20mtr tube & Hook any description including flexible attachment Make Prayag Cat No BEA-41 or equivalent complete all as specified and directed.
S&F in repair PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float and handle of capacity 10 litres including brackets complete all as specified and directed.
S&F in repairs Vitreous china wash basin, white , flat back , size 550 x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, and restoring connection componants all as specified and as directed.
S&F in repairs15 mm bore pillar tap cast copper alloy, with capstan heads chromium plated, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut, capstan head, screwed for pipe all as specified and as directed.
S&F in repairs 15mm bore Bib taps cast copper alloy chromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed all as specified and as directed.
S&F in repairs angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions.complete all as specified and as directed. Make:- Prayag Cat No 8510 or equivelent
S&F in repair PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.
S&F in repair Tubular towel rail, brass CP 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
S& F Soap Dish complete all as specified and directed. Make :- Cantabil series Cat No BA 45 of make Prayag or equivelent
S&F CP corner glass shelf 300 mm long with brass bracket, CP brass screws etc. including minimum 6 mm thick plain glass complete all as specified and directed. Make:- Prayag Cat No BEA-44 or equivelent
S&F in repair Toilet paper holder CP fixed to wall with chromium plated brass screws complete all as specified and directed. Make:- Prayag, Cat No BA-38 or equivelent
S&F Vitreous China urinals, bowl type (back or corner wall type), Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)
S&F Concussive push button taps of cast copper alloy, screwed for iron pipe and fixed , fixed in reapairs, complete all as specified and directed.
S & F Grating doom 100mm dia of PTMT(Minimum weight 25gms) fixed in repairs all as specified and directed.
S & F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) with rubber rings joints fixed in repairs all as specified and directed.
M&L 32mm dia waste fittings for pipe, brass chromium plated for glazed ware sinks, basins, etc and fly-nuts, flange end bedded in red lead cement and otherend fixed all as specified and directed.
S&F in repairs 32 mm bore PVC waste pipe with fittings of approved make suitable for WHB, Urinals etc all as specified and directed.
S&F in repair PVC(SWR) pipe 110 mm dia, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F in repair PVC(SWR) pipe 75 mm dia, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F in repair PVC(SWR) bend any radius, 110 mm dia complete all as specified and directed.
S&F in repair PVC(SWR) bend any radius, 75 mm dia complete all as specified and directed.
S&F in repair 75mm dia of outlet, PVC (SWR) floor trap, plain with grating including jointing with solvent complete all as specified and directed.
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc capacity of tank exc 500 Ltr and n exc 1000 Ltr complete all as specified and directed.
S&F in repair 25 mm bore Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
S&F in repair gun-metal, globe or gate valve with iron wheel, screwed both ends for iron pipe, ISI marked of size 20mm bore , fixed in repairs ,complete all as specified and as directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
M&L for plain cement concrete 1:4:8, type D2 using 40 mm graded aggregate in foundations, filling and mass-concrete complete all as specified and directed.
M&L brickwork with old size flyash bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.
M & L for RCC (nominal mix ) 1:1.5:3 type A1 (using 20mm graded stone aggregate), as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
Use and waste of formwork to for soffits of suspended slab such as roof slab,floor slab,landings and similar works not exceeding 200 mm thick, finished rough surfaces of concrete complete all as specified and directed
Taking down cement plaster any description on brick/stone or concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water to receive plaster complete all as specified and directed.
M&L for 10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces and finising even & smooth without using extra cement complete all as specified and directed.
M&L for 10 mm thick rendering in CM 1:6 on on stone masonry surfaces and finising even & smooth without using extra cement complete all as specified and directed.
M & L rendering 15mm thick on brick wall or concrete surface consisting two layers of 5mm thick in cement mortar 1:4 over 10mm thick in CM (1:6) finished even and smooth with using water proofing compound complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid saperately.)
M & L rendering 15mm thick on stone masonry surfaces consisting two layers of 5mm thick in cement mortar 1:4 over 10mm thick in CM (1:6) finished even and smooth with using water proofing compound complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid saperately.)
Supply only water proofing compound
M&L for preparation of newly plastered surfaces and applying two coats of oil emulsion distemper including one coat of suiatable primer including 3mm thick wall care putty in two layers on wall etc complete all as specified and directed.
M&L for complete removal of existing treatment on wall and applying two coats of oil bond distemper over & including one coat of primer including 3mm thick wall care putty in two layers on wall complete all as specified and directed.
M&L for preparation of new palstered surfaces and appling three coats of white wash on walls all as specified and as directed.
M&L for complete removal of existing treatment on wall and appling three coats of white wash on walls all as specified and as directed.
M&L for preparation of new plastered or unplastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed.
Material and labour for complete removal of existing treatment from plastered or unplastered surfaces of walls including cleaning with scrapers, any number of coats and any width or girth etc, the area of application should be cleaned thoroughly, remove all dirt, dust and uneven elements from the surface by washing and scraping and all the unevenness in the surface should be corrected by filling the exterior wallcare putty, surface should be sanded down with fine grade sand paper for smoothness applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces,as per manfecturars instructions complete all as directed and specified.
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and as directed
M&L .for RCC NP-2 drain pipe 150 mm internal dia, grade ‘A’ laid in trenches and Collar/push joint complete all as specified and directed by Engr-In-Charge.
M&L Concrete bed Cement concrete with 1:4:8 type D-2 to 150 mm ID drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified.
M&L precast RCC 1:2:4 type B1 using 20mm graded stone aggregate as in landings, cover slab,chajjas etc.and similar articles with plain faces set in CM 1:6 complete all as specified and directed.
Excavation in trenches not exceeding 1.5 mtr width and not exc 1.5 mtr in depth and getting out soft / loose soil for laying / taking out old GI Pipe / LT UG cable complete all as directed by Engineer -in -charge.
Returning, filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.
Removing of excavated materials (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
Supply and laying unreinforced precast concrete cable cover, ISI marked class LV types 1 flat size 250mm x 150mm x 40mm having minimum average breaking load 200Kg, complying IS:5820-1970 made of concrete used of grade M-20, laid flat in trenches over the cable with the length of concrete cover perpendicular to the direction of the cable length, adjacent / abutting each other at a gap of 10mm complete all as specified.
Supply, spread and filling for fine dry river sand cushion in trenches for cable protection, 8 cm in depth before laying cable and and 15 cm indepth after laying the cable complete all as specified. NOTE: - Only compacted thickness will be measured and paid.
Supply and lay GI tubing light grade ISI marked for cable protection/GI strip or wire, protection at road crossing/floor/ wall/on poles or at any indicated situation etc duly sealed at both end after drawing cable including necessary clamps, saddles all as directed and specified for the sizes 40mm bore
Taking down existing old Extg unserviceable LT UG service cable of any description and size complete as specified and directed by Engr -in- Charge.
Supply and Laying, & testing and commissioning LT under ground cable, 1100 volts grade, XLPE insulated, PVC sheathed heavy duty armoured with multi stranded aluminium conductor, laid in pipes, trenches ducts, fixed on poles etc. 4 core x 16 Sqm complete all as specified and directed.
Taking down existing unserviceable GI tubing of any size pipes including all fittings complete all as specified and directed.
Supply, lay, connect and test GI tubing ,medium grade with all fitting such as bends elbows, tees, short pieces, union etc laid in trenches and along with wall of size 25 mm dia
S & F gun- metal globe or gate valves of size 25mm bore, with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed
M & L for Cutting the existing GI Tubing 50 mm dia in position and screwing the pipe of both side for insertion of tee reducer 50x 25 mm dia for branch line etc to new water connection complete all as specified and directed
Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site.
Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed.
Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.
Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE (E/M) Jamnagar complete all as specified and as directed.
M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLSH multi stranded conductor cable in and including PVC nonmetallic rigid heavy duty PVC counduit of white/ivory colour and its accessories ISI marked heavy duty concealed in walls etc of size 20/25mm ISI marked inclusive of tees ,bend ,elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc with white laminated 3 mm thick hylam sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :-
(a) One light point controlled by one, one way switch 5 Amps
(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator
(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.
(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.
Description all as per item No 131 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH, PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLSH, PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.
S & F for Switch Piano type single pole 5 amp, 230 Volts complete all as specified and directed at site.
S & F for Switch Piano type single pole 15 amp, 230 Volts complete all as specified and directed at site.
S & F for socket outlet 2 in 1 , 5 pin, 5 amp, 230 Volts complete all as specified and directed at site.
S & F for socket outlet 2-in-1, 5 pin, 5/15 amp, 230 Volts complete all as specified and directed.
S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified
S & F for stepped type electronic fan regulator flushType complete all as specified and directed at site.
M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit
M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 4 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 4.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 4 sqmm cable,one run of 4 sqmm cable and one run of PVC conduit will be measured as one unit
S & F for sheet metal enclosure MCB DB TPN 4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.
S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.
S & F for MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.
S & F for MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.
S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.
Labour only for refixing the celing fan/ Exhaust fan obtained from item No 131 above with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc. complete all as specified and as directed.
S & F for LED down light commerial interior luminaire round shape 12 watts, white finish operating voltage 150 Volts-270 Volts AC, 50 Hz, recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling, including connecting up with driver three core flexible copper conductor cases of suitable size with warranty option of 5 years from dae of installation complete all as directed by Engineer-in-charge. Make : Bajaj Cat part No BGSLO sleek recess RD 12 W WH LED, Wipro Cat Part No LD-90-141-XXX-65-XX or its equvalent in Philips CAt part No DN296B LED 12S-6500 PSU WH or Havells or equivalent of make specified all as specified and directed by Enr-in-charge
S&F for LED luminaire commercial interior 600 m x 600 mm square LED panel 24/30 watts, 220V AC surface type with high efficiency PMMA diffuser soft glare free light completed with dirvers, holders, LED lamp suitable for roof ceiling, including connecting up with driver three core flexible copper conductor cases of suitable size with warranty option of 5 years from date of installation complete all as directed by Engineer-in-charge. Make : Bajaj Cat Part No BZRSQL 43L LED GX PRO WH, Wipro cat part No LL20-281-XXX065-ALI or its equivalant in Philips Cat part No RC383B LED 36S-4000 PSU OD WH PIR or equivalent of make specified
S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Make :- Bajaj Cat No BIBWP 10W LED or Wipro Cat Part No LW07-141-XXX-57-G1 or Philips Cat Part No. or equivalent of make specified complete all as specified and directed by Engr-in-Charge.
S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make :- Bajaj Cat Part No BCLAB 20W WH LED P or Wipro Cat Part NoLL24R-251-57XX or Philips Cat Part No BN100C LED40S-6500 PSU L120 GR or equivalent of make specified complete all as specified and directed by Engr-in-Charge.
S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make :- Bajaj Cat part No ENXT P 24L WH CR PC SD (Edge plus series) or its equvalent in Philips, Wipro or equivalent of make specified
S & F for energy efficient exhaust fan of 300 mm sweep made of metal body Ventil Air-DS type complete with louvers with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed. (Note:- Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted)
M&L for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in grond (earth pit not less than 2.25 mtrs below normal ground level) with the top edge of the plate not less than 1.5m below the normal ground level connected to GI wire 4.00mm dia protected by 15mm bore GI pipe light grade) and watering pipe 20mm bore GI pipe (medium grade) and chamber PCC (1:4:8) type D2( using 40mm grade stone aggregate), MS FUNNEL with wire mesh ,coping shall be PCC (1:3:6) type C1 using 20mm graded stone aggregate and RCC (1:2:4) type B1 using 20mm graded stone aggregate, pit cover 50mm thick reinforced with 8 mm MS bar at 80mm c/c both way in lieu of CI pit cover with lifting hook including excavation and earth work and removal of surplus soil complete all as shown in electrical plate No-3 of SSR part-I and as specified including earth plate packed around with charcoal dust common salt complete including GI sheet funnel, wire mesh, earth lead wire 4mm dia and earth lead connected to earthing test point/ main board. The GI earth wire 8 SWG under the earth and on pole/db upto a height of 1.5m shall also be protected by 15mm dia GI pipe (light grade ) and the GI pipe to be fixed with poles/wall by means of 02 Nos. FI clamp 25x3mm with nuts bolts and washer etc. incl taking down old earthing complete all as specified and directed by Engineer-in-Charge. Note :- GI earthing wire and protected pipe 15 mm dia of same size upto 7.5m shall deemed to be included into quoted rate
sanu enterprise
M/s Punnsons India
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .