Re Tender of Fabrication, erection and painting , supplying and fixing of new screw rod, embedded parts and hoisting mechanism of three MS shutters at PAANGAL

Amount

Dismantling the existing wooden shutter , screw rod and its accessories, stacking these shutter at convenient place .Including the cost of all material ,labor,hire charges.energy charges,conveyance and all leads and lifts etc.complete.

od21228/2017_2018/MH : Dismantling the existing wooden shutter , screw rod and its accessories, stacking these shutter at convenient place .Including the cost of all material ,labor,hire charges.energy charges,conveyance and all leads and lifts etc.complete.

Demolishing and chipping concrete in cement mortar and clear away the debris within a distance of 150m (to fix the sill beam )

15.1 : Demolishing lime concrete manually / by mechanical means and disposal of material within 50 metres lead as per direction of Engineer - in- Charges.

Fabrication and Supply of material for embedded parts for Sill beam and Seal track

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.107 : Supply of MS round bar including cost of conveyance charges

od7152/2018_2019/MH : Fabrication, erection and commissioning of Structural steel Embedded parts in IS2062 Grade and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour , machinery , incidental and handling charges etc complete but excluding cost of material already supplied

od25618/2019_2020/MH : Fabrication, Supply, erection and assembling in correct position and alignment by welding SS Embedded parts in 304L Grade like roller track, seal track,Seal seat etc as per approved specifications, drawings and directions of deptl officer at site including cost of all materials,labour,machinery for planing, welding,shearing, grinding etc,lead and lift, conveyance, incidental and handling etc complete

Providing and laying in position specified grade RCC 1:1.5:3 for fixing sill beam,making hoisting slab,fixing dowell bar Etc.

5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

Suppy of MS materials (MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B ) for fabricating shutters , including cost of conveyance charges

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

Fabrication of MS shutters , using 10mm MS plate as skin plate,ISA 65x65x10 as stiffners.

od7167/2018_2019/MH : Fabrication and supply of Structural steel shutters and accessories as per approved specifications and deptl officers at site including cost of labour ,machinery , all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied Rate analysis for 9.6qtl fabrication

Painting of shutters with 2 cost of epoxy coal tar paint over two coat of zinc rich primer after cleaning the surface properly by hand and power tool and erection of gates saftely in the grooves

85.114 : Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

Supply and fabrication of screw rod of outer dia 65mm.including cost of all materials, labour, hire charges and conveyance etc.complete

od7168/2018_2019/MH : Supply of EN -8 shaft having 65mm outer dia for Screw rod

od7169/2018_2019/MH : Machining of shaft 65mm outer dia , head pitch of 12.7 mm root dia 50.3 mm using EN -8 shaft Including cost of all material, labour,tools etc. complete

Providing of worm and pinion having a lifting speed of around 5.00 cm/min for 24 rpm of hand operation including cost of all materials, labour, trial run hire charges and conveyance.(2Nos worm and Pinion/shutter)

od18726/2017_2018/MH : Providing of worm and pinion having a lifting speed of around 5.00 cm/min for 24 rpmof hand operation, mechanical stopper and Locking arrangement including cost of all materials, labour, hire charges and conveyance.(2 No worm andPinion ,excluding the cost of line shaft)

od7226/2018_2019/MH : Providing connecting shaft to connect two worm reducers (already supplied) of the operating mechanism including cost of GI pipe, coupling flange, handle for hand operating mechanism etc

Supply of MS materials (MS Plates, MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B) and GI Pipes for fabricating hoisting bridge and hand rails including cost of conveyance charges.

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

od18729/2017_2018/MH : Bolts and nuts up to 300 mm in length

od18730/2017_2018/MH : Supply of Bolts and nuts above 300 mm in length

Fabrication of hoisting bridge and accessories comprising ISMC150x75 as main girder ISA 65x65x8 as stool 10mm MS plate as base plate includes the cost of material labor etc.complete

od7170/2018_2019/MH : Fabrication and supply of Hoisting Girder in structural steel confirming to IS2062Gr as per approved specifications and directions of deptl officer at site including cost of labour, machinery, incidental and handling charges for fixing handrails and allied works etc complete but excluding material already supplied.

Painting of hoisting bridge and its accessories with 2 coats of enamel paint over 1 coat of zinchromate primer after hand power tool cleaning

85.115 : Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

85.117 : Supplying and fixing in correct position with specified initial interface the Angular type rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

85.116 : Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

od25148/2019_2020/MH : Erecting the shutter , operating mechanism ,hoisting platform involving the work of lifting andplacing them, setting, aligning etc. including labour, hire and conveyance charge of tools.

od25622/2019_2020/MH : Trial run the gates with its hoisting mechanism etc. including cost of all materials, machinery , labour, all lift and lead, incidental and conveyance charges etc. As per instruction of departmental officers in charge.

Manual conveyance of fabricated parts from road to site

od29953/2017_2018/MH : Conveying manually the fabricated shutter and its accessories from road side to site

Bidder Name

SOMAN K