Tender for Emergency work of locate 22kv / 11kv UG cable fault locating & attending the fault by providing joining kit etc. [suitable Straight through joining kit & Outdoor end termination kit to be supplied by contractor and 22kv / 11kv XLPE cable will be supplied by DGVCL] under All Sub Sub divisions area under Pandesara Division

Labour charge for excavation of 2100mm long

x 1200mm wide x 1200 mm deep joint pits for

installation of 11kV / 22kV Straight through

joints as per instruction of engineer-in-charge &

1. covering the cable with 150 mm dia (Outer), No

thickness 25 mm, 1.0 meter long RCC half

round muffs & refilling same as per

instruction of EIC .

Supply & fixing of heat shrinkable straight

through joint type for upto 22kV 3C x 185 mm2

2. size XLPE cable as per DGVCL technical No

specification(Using Approved make cable kit as

per DGVCL technical specification)

Supply & fixing of heat shrinkable straight

through joint for upto 11kV 3C x 185 mm2 size

3. XLPE cableas per DGVCL technical specification.

(Using Approved make cable kit as per DGVCL

technical specification)

Supply & fixing of heat & shrinkable end

4 terminations (Indoor/outdoor) for upto 22 kV 3C

x 185 mm2 size XLPE cable as per DGVCL

technical specification(Using Approved make

cable kit as per DGVCL technical specification)

Supply & fixing of heat shrink type end

terminations (Indoor/outdoor) for upto 11kV 3C No

x 185 mm2 size XLPE cable as per DGVCL

5 technical specification(Using Approved make

cable kit as per DGVCL technical specification)

Work of fault finding 11/22 cable under ground Nos

6 XLPE cable fault locating exact place of fault.

Consecutive more than one Fault Finding on Nos

7 same cable till the cable charged fully.

8 Labour charge for excavation of cable trench of Meter

400mm width x 1200mm depth, in any type of

soil for laying of cable of size up to 240 mm2

(For additional cable 200 mm additional width

shall be considered i.e. half trench length is to

be considered)

9 Labour charge for laying of 11kV / 22 kV XLPE Meter

Cable of size up to 240 mm2 & preparation of

sand layer 100mm thick, in the cable trench &

covering the cable with 150 mm dia (Inner),

thickness 25 mm, 1.0 meter long RCC half

round muffs and providing and fixing of 4inch

width yellow colour polyethylene tape with

printing "CAUTION ELECTRIC CABLE BELOW" at

0.75 m depth from ground surface after laying

cable in trench. This will provide indication that

electric cable is passing underground so as to

protect cable from mechnical injuries, refilling

the same, as per Instruction of Engineer in

Charge (EIC).

10 Labour work for RCC concreting on disputed CMT

location and repairing of damage portion of

road crossing for the work carried out for roads

crossing as well as concreting & muffing of

ploes including all materials (1:2:4)

11 Providing & fixing concrete stone route marker NO

of 300 mm width x 150 mm thick x 650 mm

height embedded in earth at least 300 mm

below & 350 mm above ground level

respectively at distance approx 50 meters along

the length of cable. The RCC concreting (1:2:4)

(all necessary maeterials will be in bidder's

scope) of route marker is to be carried out

mm width x 150 mm thick x 300 mm below

ground level as per instruction of EIC. The

route marker should be with name of company

with approved yellow colour-DGVCL. The

distance from marker to cable and cable depth

with feeder name etc., marked with arrow sign

is to be painted on it.The route marker is to be

fixed at location near to any fixed permanent

location (not necessary to fix exact on top of

cable) as per instruction of EIC.

12 Providing and fixing of pipe type earthing from No

80 mm dia class-B GI pipe with pit to be filled

per DGVCL Drg. No. dg /100 for DP and cable.

The earthing pit should be joined with cable by

G.I. strip of size 1” width & 2 mm thick. All

material GI pipe, Coke, Salt etc will be supplied

by bidder.

13 Labour charge for erecting of 11kV / 22 kV XLPE

cable of size up to 240 mm2 on DP Structure

with fixing of 02 Nos polymer cleats on top and Per Job

middle part. Polymer cleats, nut bolts etc.

fixing material to be provided by contractor.

14 Providing & fixing of 6.11kg/cm2 , class-4,Green

color, 110mm O.D. , 8.5mm thickness H.D.P.E.

pipe confirms to IS 4984 and BIS certification

on the erected DP structure for the mechanical

protection of cable by inserting the cable inside

HDPE pipe. The HDPE pipe shall be erected in

Per Job

such a way that 300mm shall be below the

ground level and the rest 2700 mm shall be

supported on the DP Structure with 01 No

Polymer cleat.All materials including polymer

cleat and Nut bolt to be provided by contractor.

15 Testing of cable at various points and

commissioning the feeder as per instruction of

engineer-in-charge.Test result shall be

submitted by contractor with bill.

16 Supply & fixing of heat shrink type end

terminations (outdoor) for 11kV 3C x 240 mm2 Nos

size XLPE cable as per DGVCL technical

specification(Using Approved make cable kit as

per DGVCL technical specification)

17 Supply & fixing of heat & shrinkable end

terminations (outdoor) for 22 kV 3C x 240 mm2

size XLPE cable as per DGVCL technical Nos

specification) (Using Approved make cable kit as

per DGVCL technical specification)

18 Supply & fixing of heat shrink type end

terminations (indoor) for 11kV 3C x 240 mm2

size XLPE cable as per DGVCL technical Nos

specification) (Using Approved make cable kit as

per DGVCL technical specification)

19 Supply & fixing of heat shrinkable straight

through joint for 11kV 3C x 240 mm2 size XLPE

cableas per DGVCL technical specification. Nos

(Using Approved make cable kit as per DGVCL

technical specification)

20 Supply & fixing of heat shrinkable straight

through joint type for 22kV 3C x 240 mm2 size

XLPE cable as per DGVCL technical Nos

specification(Using Approved make cable kit as

per DGVCL technical specification)

RS THIRTY ONLY. Total

Grand Total

Grand Total

In Words:- Fifteen Lacs only.

Note: (1) Above rates are inclusive of all taxes, levies, duties & PF etc. Exclusive of GST

(2) 22KV XLPE cable will be supplied by DGVCL.

(3) Agency have to supply and provide end termination and St.Jointing kit of 11/22KV rating of Raychem/ 3M/

dension/tyco brand for the work as per G.T.P. attached with tender.

(4) Pit for straight joint have to Excavate for 2100mm wide & 1200 mm depth & if more size pit excavate

Proportionate rate should be given & agency is fully responsible for excavate pit either by JCB or

(5) In emergency, when Dept. fault finding VAN not available, than only item at Sr. No 6 & 7 In Sch-B may

be applicable and justification must be attached.

SIGN OF CONTRACTOR

Executive Engineer (O & M)

DGVCL, Pandesara Division