Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.3 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹39.9 L+₹5.2 L (14.9%)Rejected-AOC | L2 | Rejected-AOC Being not L1 | |
| 3 | L3₹40.5 L+₹5.7 L (16.5%)Rejected-AOC | L3 | Rejected-AOC Being not L1 | |
| 4 | L4₹40.6 L+₹5.8 L (16.8%)Rejected-AOC | L4 | Rejected-AOC Being not L1 | |
| 5 | L5₹42.3 L+₹7.5 L (21.6%)Rejected-AOC | L5 | Rejected-AOC Being not L1 |
Tender Value
₹45.5 L
EMD Value
₹91,000
Closing Date
12 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri M Saravanan, IDSE, GE
Garrison Engineer North 35 Allenby Lines Secunderabad 500087
SPL REPAIRS TO SEWAGE LINE SEPTIC LINE SOAK PITS OF OTM IN BLDG NO E1DD E2DD E1E2DD T 44D AT PLASSEY LINES SPL REPAIRS TO 04 X BATHROOM OF BLDG NO P 22 AT SARVATRA LINE AND PROVN OF CUDAPPA STONE IN KITCHEN SINK UTENSIL PLATE RACK WOODEN CABINET IN
2023_MES_632981_1
8738
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer (North) Secunderabad
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Garrison Engineer (North)
₹91,000
Yes
7 Feb 2024
15 Dec 2023
19 Jan 2024
15 Dec 2023
12 Jan 2024
29 Dec 2023
Amount
Excavation in trenches n exc 1.50 m wide & n exc 1.50 in depth, for foundation etc or for shafts, wells, cess pits, manholes, pier holes etc n exc 10 sqm on plan and n exc 1.50 m in depth and getting out in soft/loose soil complete all as specified and directed.
Returning filling in including spreading levelling watering and well ramming in layers not exc 25cm thick complete all as specified and directed.
Removal of surplus soil to a distance n.exc. 50 m and n.exc. 1.5 m above the starting point complete all as specified and directed.
Demolition of cement concrete (un reinforced) of any description and in any position not other specifically provided including removal of debris beyond the premises complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position including removal of debris beyond the premises complete all as specified and directed.
Demolition of RCC Roofs, floors, landings, similar suspended work as in washing platforms etc., including removal of debris beyond the premises complete all as specified and directed.
M&L Providing RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in slabs supported on walls complete all as specified and directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
M&L Pre cast RCC ( 1:2:4) type B1 (using 20 mm graded stone aggregate) as in cover slabs for manholes, and set in CM (1:6) including necessary formwork complete all as specified and directed.
M&L Mild steel reinforcement TMT bars 6mm to 8mm dia and over cut to length bent to shape required including cranking hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in bed concrete and mass concreting complete all as specified and directed.
M&L PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in coping of drain/walls complete all as specified and directed.
M&L PCC ( 1:2:4) type B1 (using 20 mm graded stone aggregate) in coping, benching of manholes, drains, compound walls, bed blocks etc, with necessary formwork complete all as specified and directed.
M & L Rendering 15mm thick in CM (1:3) on fair faces of brick/concrete surfaces of sunken floors, including taking down existing plaster and mixing with water proofing compound (WPC), finished even and fair complete all as specified and directed. NOTE: WPC will be measured and paid separately.
M&L PCC (1:7:12) type F2 (using 40 mm graded stone aggregate) as in filling and mass concrete complete all as specified and directed.
M&L 25 mm thick PCC (1:2:4) type B0 (using 12.5 mm graded stone aggregate) and make to slope in sunken floors complete all as specified and directed by Eng-in-charge.
M & L Application of one coat of water based bitumen emulsion primer @ 0.3 lit per sqm including cleaning of surface thoroughly from dust & dirt. Lay water proofing treatment with polymetric membrane 3 Kg/ sqm standard consisting of 90 micron, HMHDPE torch on membrane over a coat of blown bitumen 85/25 @ 1.2 Kg/sqm on top of membrane and providing 25 mm thick sand cushioning to receive lean concrete in sunken floor complete all as directed and as specified.
Demolition of brick work built in cement mortar, including all quoins, arches, pillar etc., including removal of debris beyond the premises complete all as specified and directed.
M&L for Brick work with flyash bricks straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed.
M&L for Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and directed.
M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM (1:6) complete all as specified and directed.
Taking down chowkats with shutters (without taking of shutters from the frame) exc 1.50 Sqm but not exc 4 Sqm each complete all as specified and directed.
Taking down chowkats with shutter (without taking off shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed.
S&F Pressed steel frame of size 165 x 60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.
M&L PCC (1:2:4) type B1, (using 20mm graded stone aggregate) as in bed plates, kerbs, copings, filling of hallow portion of MS frames etc., including necessary form work complete all as specified and directed.
S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube supplying & fixing in openings as per specification & drawings complete all as specified and directed.
S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Paneling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per drawings and specifications complete all as specified and directed.
S&F 30 mm thick flush shutter solid core construction with black board core and ply wood face panels commercial type on both sides complete all as specified and directed.
S & F 100mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B1 complete all as specified and directed.
S&F 200mm long aluminum anodized barred tower bolts, of extruded section with bright bolt complete all as specified and directed.
S&F 150 mm long extruded aluminium alloy handles fabricated type, anodised, complete all as specified and directed.
S&F Factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
M&L for bands, straps, supports or stays for rain water , ventilating pipes, including bolts, if required complete all as specified and directed.
Dismantling wall floor or hearth tiling including cement mortar bedding but not backing and rubbish off the premises complete all as specified and directed.
S&F Non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm in floors etc., set and jointed in neat cement slurry and painted in white cement to match over 15mm thick screed bed in CM (1:6) complete all as specified and directed.
S&F Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick rendering in CM (1:4) as backing coat complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc.,including removal of debris beyond the premises complete all as specified and directed.
M&L Machine cut cudappah stone slab 20-25mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over kitchen platform and shelves over 20mm thick screed bed in CM (1:6) complete all as specified and directed.
M&L for 20mm thick granite (of any type) work ( table rubbed and polished) in steps, jambs, pillars, window-cills, washing platforms, and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., complete all as specified and directed.
Taking down cement plaster on brick or stone walls or terrazzo dado, etc including racking out joints hacking for keys scrubbing down with water etc., complete all as specified and directed.
M&L Rendering 10 mm thick in CM (1:6) on brick masonry or concrete surface, including finished the surface smooth and even without using extra cement complete all as specified and directed.
M&LRendering 15mm thick CM (1:6) on brick masonry or concrete surface, including finished the surface smooth and even without using extra cement complete all as specified and directed.
M&L Rendering 5mm thick CM (1:3) on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L Rendering 10mm thick CM (1:4) on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L Rendering two coats, first coat 10mm thick in CM (1:6) and 2nd coat 5mm thick in CM (1:4) with water proofing compound on external wall brick / concrete surfaces, finished even and smooth without using extra cement complete all as specified. (Note : Supply only approved water proofing compound shall be measured and paid separately under relevant item)
Supply only integral water proofing compound complete all as specified and directed.
M &L Preparation of new surfaces of walls and applying three coats of white wash complete all as specified and directed.
M & L Preparation of new surfaces of ceilings and applying three coats of white wash complete all as specified and directed.
M &L Preparation of new surfaces of walls and applying two coats of colour wash over a coat of white wash complete all as specified and directed.
M&L Preparation of new surfaces of walls and applying two coats of distemper (oil emulsion) over a coat of chalk whitening of any colour complete all as specified and directed.
M&L Preparation of new surfaces of ceilings and applying two coats of distemper (oil emulsion) over a coat of chalk whitening of any colour complete all as specified and directed.
M&L Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat pink primer complete all as specified and directed.
Taking up or down steel tubing and connections, 25 mm bore including cleaning for refixing (or) removing to store, complete all as specified and directed.
Taking up or down steel tubing and connections, 20 mm bore including cleaning for refixing (or) removing to store, complete all as specified and directed.
S & F in repairs 32 mm dia GI pipe (medium grade) in short lengths for spouts including cutting holes in walls and making good with CM (1:3) complete all as specified and directed.
S&F 25mm CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete all as specified and directed.
All as per item No. 57 above, but 20mm bore complete all as specified and directed.
S&F in repairs 15mm bib taps, cast copper alloy with crutch or butterfly handle screwed down for iron pipe complete all as specified and directed.
S&F 15 mm bore bib taps chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S & F in repairs 15 mm bore stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union complete all as specified and directed.
S & F PVC connection 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.
S & F swivel shower of PTMT any colour for fixing with 15mm pipe complete all as specified and directed.
S&F in repairs WHB Vitreous china glazed size 550x440mm, oval type coloured including cutting for & pinning in ends of brackets or existing stand including CP waste pipe and fitting 32mm complete all as specified and directed.
S&F in repairs 15mm dia pillar taps SWAN NECK type copper alloy with capstan head chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.
S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed.
S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed.
S&F Grating doom 100mm dia of PTMT (Minimum weight 25 grms complete all as specified and directed.
M & L for Low density waste pipe 32 mm dia for working pressure rating 4 Kg/Sqcm with polyethylene union and check nuts 75 cm long suitable for WHB/URINAL complete fixed in repairs
S & F in repairs Vitreous china Squatting pan orissa pattern size 580 x 440mm white with integral foot rest including connection to trap, and to flush pipe anti syphanage pipe etc., complete all as specified and directed.
S & F in repairs PVC low level flushing cistern 10 Lit capacity complete all as specified and directed.
S&F in repairs Vitreous china Urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including connection to flushing pipe and out going pipes etc., complete all as specified and directed.
S & F in repairs Gun metal gate valve, with iron wheel head screwed both ends for 25 mm bore pipe complete all as specified and directed.
S&F Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F PVC flexible waste pipes 32/38 mm bore 80cm long complete all as specified and directed.
S&F in repairs Stainless steel plate rack of size (900X600X250)mm complete all as specified and directed. Make : Blue star Cat Pat No: BSKPR312
M&L for 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
M&L for 75 mm dia PVC (SWR) pipes single socketed, in any length, with rubber ring joints, fixed to walls complete all as specified and directed.
M&L for 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.
S&F 75 mm PVC (SWR) bends any radius complete all as specified and directed.
S&F 75 mm PVC (SWR) bends any radius provided with access door complete all as specified and directed.
S&F 75 mm PVC (SWR) branch piece, single (single Y) equal or un equal complete all as specified and directed.
S&F 110 mm PVC (SWR) branch piece, single (single Y) equal or un equal complete all as specified and directed.
S&F 75mm PVC (SWR) Plain floor trap with grating including jointing with solvent cement complete all as specified and directed.
S&F 75 mm PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed.
S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.
Demolition and breaking up drain pipes salt glazed ware, AC, PVC or reinforced concrete) 300 mm dia set in cement mortar height upto 12 mtr complete all as specified and directed.
All as per item No 88 above, but for 200 mm bore pipes complete all as specified and directed.
All as per item No 88 above, but for 150 mm bore pipes complete all as specified and directed.
Demolition and breaking up drain pipes (salt glazed ware AC or Reinforced concrete) set in cement mortar 100mm dia complete all as specified and directed.
All as per serial item No. 91 above, but 75mm bore complete all as specified and directed.
M&L Concrete bed to drain pipes of size 300mm bore pipe with using PCC (1:4:8) type D-2, (using 40mm graded crushed stone aggregate) as in including packing under & haunching against the sides of pipes after the pipe are laid and tested complete all as specified and directed.
All as per item No 93 above, but for 200 mm bore pipes complete all as specified and directed.
All as per item No 93 above, but for 150 mm bore pipes complete all as specified and directed.
M&L Concrete bed to drain pipes of size 300mm bore pipe with using PCC (1:4:8) type D-2, (using 40mm graded crushed stone aggregate) including packing under & completely surrounding pipes with concrete (300mm bore pipe) after the pipe are laid and tested complete all as specified and directed.
All as per item No 96 above, but for 200 mm bore pipes complete all as specified and directed.
All as per item No 96 above, but for 150 mm bore pipes complete all as specified and directed.
M&L for RCC pipes class NP 2 of 300 mm dia laid and jointed complete with collars complete all as specified and directed.
M&L for RCC pipes class NP 2 of 200 mm dia laid and jointed complete with collars complete all as specified and directed
M&L for RCC pipes class NP 2 of 150 mm dia laid and jointed complete with collars complete all as specified and directed.
Renewal & replacement of 50 users RCC septic tank with effective depth of 1.5m and overall depth of 3m designed to carry sewage and sullage water, excavation in any type of soil, PCC (1:4:8) below foundation, RCC M 30 (Design mix) in walls, base slab, baffle walls and roof slabs including beams etc with vent shaft, manhole openings with cover connection etc., complete all as specified and directed by Engr-in-charge.
M&L for Soakage well of size 1.8m dia x 3m effective depth with excavation, in all type of soil, foundation in PCC (1:3:6), walls of honey combed masonry with top ring of M 25 concrete including intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slabs in M 25/ SFRC cover, interconnecting pipes of RCC/ DWC,etc filled with brick bats,etc complete all as specified and directed by Engr-in-charge.
M&L for destruction of growth of weed, plants with roots on the roof of bldgs and on the wall of bldgs (any height) with 2.40 'd' oil mixed veedicides or mixed with veedol chemical solution and sprayed on and around roots and at places of possible growth of weeds complete all as specified and directed.
M/s GM Constructions
LAKSHMI ENGINEERS
SURA INFRASTRUCTURE
GNV Engg Services
RAM CHARAN CONSTRUCTIONS
SRI BHAVANI ENTERPRISES
NEWS CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .