REPAIRS TO FLOOR, WALL, SANITARY FITTINGS, ROOF, JOINERY ETC IN SMA AREA AND A AND B AREA AT NAVAL BASE KOCHI

Amount

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), all as specified and directed.

M&L for 100 mm thick plain cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base all as specified and directed .

M&L for PCC 1:3:6 type C2, 75 mm thick using 40 mm graded stone aggregate finished surface even and smooth without using extra cement, all as specified and directed.

M&L for coarse aggregate for granolithic floors, graded from 12.5mm to 4.75mm under floors or in foundations, spreading, levelling and well ramming in layers not exc 25cm thick, including watering as required complete all as specified and directed.

S&F Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness ,M-35 Grade with grey cement and pigment all as specified and directed.

M&L for cement concrete type B-1, 1:2:4 using (20mm graded stone aggregate) 40mm thick as in flooring, all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for glazed ceramic colored designed straight edge tiles 7mm thick, size of tile n.exc 600mmX300mm on vertical surfaces such as skirting or dados laid over cement mortar backing coat set and jointed with neat cement slurry and pointed in white or coloured cement to match incl Rendering in CM 1:4, 10mm thick for fixing tiles on skirting/dado all as specified and directed.

M & L for Non Skid ceramic colored tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm on floors laid over cement mortar screeding set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles incl 15mm thick screed bed or bedding layer of mortar in CM 1:6 all as specified and directed.

M & L for Non Skid ceramic colored tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm on floors laid over cement mortar screeding set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles incl 15mm thick screed bed or bedding layer of mortar in CM 1:6 all as specified and directed.

M & L for Non Skid ceramic colored tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm on vertical surfaces as skirting including 10mm thick cement plaster 1:3 and pointed in white or coloured cement to match the colour of tiles all as specified and directed.

S&F Vitrified Ceramic tiles light shade, 10 mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 Sqm, in floors and dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed or bedding layer of mortar in CM 1:6 all as specified and directed.

S&F vitrified Ceramic tiles light shade, 10 mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 Sqm, in vertical surfaces as skirting including 10mm thick cement plaster 1:3 and pointed in white or coloured cement to match the colour of tiles all as specified and directed.

Demolition of brickwork/block masonry or stone masonry or PCC block masonry built in cement mortar including removal of debris all as specified and directed.

M&L for pre-cast cement concrete block masonry in Type C1, 1:3:6 (20mm graded aggregate) with solid blocks, exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water any description, etc.

M&L for rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4, finished even & smooth (without using extra cement.) all as specified and directed .

M & L for applying two coats of cement base paint over a coat of primer on plastered surfaces of walls incl preparation of surface all as specified and directed.

M&L for rendering 10mm thick on brick work or concrete surfaces in cement mortar 1:6 finished even & smooth (without using extra cement.) all as specified and directed .

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L for rendering 5mm thick CM 1:3 on fair faces of concrete surfaces on ceiling, all as specified and as directed.

M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash all as specified and as directed.

M&L for cutting/grinding of terrazzo tiles or kota stone floor etc with grinding machine after filling the pits and holes with matching cement and polishing with 3 step grinding stone complete on floor/ vertical surface of wall dado, skirting etc complete all as specified and directed.

S & F in repairs Vitreous china wash down water closet pan(EWC), any color, pedestal pattern, all as specified and directed.

S&F in repairs vitreous china squatting pan orissa pattern (IWC) size 580x440mm white with integral foot rest including provision of lime concrete bedding all as specified and directed.

S & F in repairs Plastic seat cover, any color closed pattern with flat bottom & cover and mild steel chromium plated or aluminium hinges, etc including fixing bolts complete all as specified and directed.

S & F in repairs PVC valveless, syphonic action type, flushing cistern, low level, any color, with inlet ball valve, float and handle including brackets and all connections, ISI marked, all as specified and directed.

S & F in repairs PVC connection 15mm bore 45cm long with brass coupling complete.

S&F in repairs white glazed vitreous china WHB flat back size 550x400 mm including CI bracket etc incl PVC waste pipe 40mm bore 90cm long with coupling spring type complete all as specified and directed.

S&F in repairs vitreous china urinal bowl flat back of size 465 X 355 X 265mm white alongwith waste coupling including fixing plugs, beding urinal against wall in CM 1:2 securing urinals to plugs including 60mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

S&F in repairs 125 mm dia stainless steel grating complete all as specified and directed.

S&F in repairs stop valve, cast copper alloy, screwed down, high pressure, screwed at the ends for iron pipe or union with crutch or butterfly handle of 15mm dia including GI Nipple and Socket complete all as specified and directed.

All as per item No.32 above, but fancy type, chromium plated with long shank and cup (concealed type) as in repair.

S&F in repair Brass Chromium plated waste coupling 32 mm dia all as specified and directed.

S&F in repairs PVC (SWR) Nahani trap/floor trap, 75mm , plain with grating including jointng with solvent cement complete, all as specified and directed.

S&F in repairs 32 mm dia PVC waste pipe with cup head for Wash Hand Basin all as specified and directed.

S&F in repairs stainless steel sink with draining board made out of 1.0mm thick sheet for kitchen with plug , washers, waste pipe , cast iron cantilever brackets, connecting union, over all size 915X460mm with bowl size 410X330X160mm all as specified and directed. Make Nirali/Jayna/Coment as in repair.

S& F in repairs pillar tap 15mm bore fancy type, cast copper alloy with capstan heads, chromium plated, screwed down, all as specified and directed.

S&F in repair Brass Chromium Plated Tubular Towel Rail, 20mm dia, D type, 60 cm long between flanges and fixed, complete all as specified and as directed.

S&F in repairs CP Brass concealed stop cock knob with caps and brass screw all as specified and directed. Make-Parryware

Taking down chowkats or frames with shutters (without taking off shutters from frames) n exc 1.50 sq. m each all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutters from frames) exc 1.50 sq. m but not exc 4 Sqm each all as specified

Taking down shutters of any description not exc 1 sqm each

Taking down shutters of any description exc 1 sqm and n exc 2Sqm each

Taking down shutters of any description n exc 1 sq.m each and refixing in same opening after necessary repair all as specified &directed by Engr-in-Charge

Taking down shutters of any description exc 1 sq.m and n.exc 2 sq.m each and refixing in same opening after necessary repair all as specified &directed by Engr-in-Charge

M&L for 2nd class hard wood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified

M&L for 35 mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats all as specified

S&F Glazed and skeleton shutters for doors 35mm thick 2nd class hardwood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat all as specified and directed.

S&F Glazed and skeleton shutters for windows and ventilators 30mm thick 2nd class hardwood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkat all as specified &directed by Engr-in-Charge.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides for cubboards and similar works etc complete all as specified

S&F powder coated aluminium frame work for doors, windows, ventilators and partitions with one or more rebates including joining cleat for fixing etc.complete all as specified (minimum thickness of powder coating 50 micron).

S&F powder coated aluminium window & ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55Kg/RM including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium fitings such as peg stays 150mm long (1No), hinges type B21 100mm long (2Nos), suitable handle (1No) complete all as specified and directed.

S&F 4 mm thick figured glass, pin head type, ordinary quality fixed with aluminium beading, glazing pin etc in square not exc 0.50 sqm in each pane complete all as specified and directed.

S&F 4 mm thick sheet glass, ordinary quality fixed with aluminium beading, glazing pin etc in square not exc 0.50 sqm in each pane complete all as specified and directed.

S& F Alluminium anodised DECO Grill 10mm thick DG 104 fixed with necessary H/F/H channel etc complete all as specified and directed. (Note : Deco grill fixed with windows with all fittings as directed by Engr -in- charge)

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5.0mm plain colour PVC sheet reinforced with mild steel square tube, and fixing in opening as per specifications and drawing, complete all as specified and as directed.

S&F Factory Made Solid Panel PVC Door Shutter 30 mm thick (style) consisting of frame made out of Mild Steel Tubes for Top & Bottom Rails having Mild Steel Frame shall be covered with heat moulded plain colour PVC ‘C’ Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and plain colour PVC Sheets for Top Rail, Lock Rail & Bottom Rail on either side and as gap insert for Top Rail & Bottom Rail; Panelling of plain colour PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles and Rails with suitable PVC Sheet Beading and joined together with Solvent Cement and fixing in the Frame at Site as per Specifications and Drawing, complete all as specified and as directed.

S&F 100mm stainless steel hinges, medium weight, colled rolled, fixed with screws complete all as specified and directed.

All as per item No.60 above, but 75mm size.

S&F 200mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in repairs Aluminium Door closer, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified and directed.

S & F Hasp staple 100mm brass safty type with mild steel hinge pin including bolt to hinge plate fixed with screws complete all as specified and directed.

S & F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified

All as per item No.65 above, but 100mm size.

S&F 125mm long Aluminium anodised handle, cast type all as specified and directed.

All as per item No.67 above, but 100mm size.

S&F in repairs stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, all as specified and directed.

S&F bands, straps, supports or stays for rainwater, ventilating pipes including bolts, if required, hooks (stay) heavy for large gates, hold fasts and similar articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate for fixing hold fast including necessary formwork all as specified and directed.

M&L for repair to steel window/ ventilator in any position by casing of hinges including oiling, cleaning, welding as necessary including cutting and making good of old jambs etc to match with the existing for smooth functioning of shutters complete all as directed (The rate quoted are deemed to be inclusive of carrying out repairs from external side of multistorey bldgs)

M&L for repair to aluminium doors of size n.exc 2 sqm each and making good and functional including changing of pivot,repairs to lock,handle,rubber beadings etc all as directed

Hacking out old broken glass (any thickness) from wooden frame fixed with putty or fixed with beads.

M&L for 5.5 mm thick sheet glass, ordinary quality fixed with aluminium beading, glazing pin or with oil putty in square exc 0.50 sqm in each pane all as specified

S&F 4mm thick Sheet glass one side frosted, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

M&L for 4 mm thick sheet glass, ordinary quality fixed with oil putty in square not exc 0.50 sqm in each pane all as specified

Dismantling of cast iron or reinforeced concrete drain pipes, jointed in cement mortar and taking out of walls all as directed.

S&F 75 mm PVC (SWR) pipes single scoketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110 mm PVC (SWR) pipes single scoketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) bends, 75mm dia complete, all as specified and directed.

S&F PVC (SWR) bends, 110mm dia complete, all as specified and directed.

S&F PVC (SWR) junction single (single T) equal or unequal 75 mm dia with access door, all as specified and directed.

S&F PVC (SWR) junction single (single T) eqUal or unequal 110 mm dia with access door, all as specified and directed.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for all as specified and directed.

M & L for PCC 1:3:6 type C2 using 40mm graded stone aggregate, 75mm thick, as in plinth protection, path, pavings etc incl making impressions of expanded metal, whilst the concrete is green, all as specified and directed.

Vidya constructions

POOJA ENGINEERING WORKS

Anaswara Constructions

MS BUILDERS

SUKU CONSTRUCTIONS