Loading…
Loading…
Tender ID
Tender Value
₹48.3 Cr
EMD Value
₹96.6 L
Closing Date
5 May 2026, 3:00 pmClosed
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
01
21 conditions · 10 needing a document upload
1.2 Financial Eligibility Criterion: The tenderer must have minimum average annual contractual turnover of 'V/N' or 'V' whichever is less; where V=Advertised value of the tender in Crores of Rupees. N=Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderer shall submit requisite information as per Annexure-IV, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported by Audited Balance Sheet. Financial Eligibility Criteria (For Joint Venture Firm): The JV shall satisfy the requirement of "Financial Eligibility" mentioned at para-1.2 above. The "financial capacity" of the lead member of JV shall not be less than 51% of the financial eligibility criteria mentioned at para-1.2 above. The arithmetic sum of individual "financial capacity" of all the members shall be taken as JV's "financial capacity" to satisfy this requirement. Note: - Contractual payment received by a Member in an earlier JV shall be reckoned only to the extent of the concerned member's share in that JV for the purpose of satisfying compliance of the above-mentioned financial eligibility criteria in the tender under consideration.
1.3. Bid Capacity: For tenders having advertised value more than Rs.10 Crore wherein eligibility criteria include bid capacity also, the tenderer will be qualified only if its available bid capacity is equal to or more than the total value of the present tender. The available bid capacity shall be calculated as under: - Available Bid Capacity = [A x N x 2] (-)0.33 x N x B Where- A = Maximum value of construction works executed and payment received in any one of the previous three financial years or the current financial year (up to date of inviting tender), taking into account the completed as well as works in progress. N = Number of years prescribed for completion of work for which bids has been invited. B = Existing commitments and balance amount of ongoing works with tenderer as per the prescribed proforma of Railway for statement of all works in progress and also the works which are awarded to tenderer but yet not started upto the date of inviting of tender. NOTE:- (a)The Tenderer (s) shall furnish the details as per Annexure VI of tender document:- (i)Maximum value of construction works executed and payment received in any one of the previous three financial years or the current financial year (up to date of inviting tender) for calculating A and. (ii)Existing commitments and balance amount of ongoing works with tenderer as per the prescribed proforma of Railway for statement of all works in progress and also the works which are awarded to tenderer but yet not started up to the date of inviting of tender for calculating B. In case of no works in hand, a 'NIL' statement should be furnished. The submitted details for (i) and (ii) above should be duly verified by Chartered Accountant. Bid Capacity for Joint Venture Firm:- The JV shall satisfy the requirement of "Bid Capacity" requirement mentioned at para-1.3 of NIT. The arithmetic sum of individual "Bid capacity" of all the members shall be taken as JV's "Bid capacity" to satisfy this requirement. (b)In case if a bidder is JV, the tenderer (s) must furnish the details of (i)Maximum value of construction works executed and payment received in any one of the previous three financial years or the current financial year (up to date of inviting tender) by each member of JV for calculating 'A', and (ii)Existing commitment and balance amount of ongoing work with each member of JV either in individual capacity or as a member of other JV as per the prescribed proforma of Railway for statement of all works in progress and also the works which are awarded to each member of JV either in individual capacity or as a member of other JV but yet not started up to the date of inviting of tender for calculating 'B'. In case of no works in hand a 'NIL' statement should be furnished. The submitted details for (i) and (ii) above should be duly verified by Chartered Accountant.
(c)Value of a completed work/work in progress/work awarded but yet not started for Member in an earlier JV shall be reckoned only to the extent of the concerned member's share in that JV for the purpose of satisfying his / her compliance to the above mentioned bid capacity in the tender under consideration. (d)The arithmetic sum of individual "bid capacity" of all the members shall be taken as JV's "bid capacity". (e)In case, the tenderer/s failed to submit the above statement along with offer, their/ his offer shall be considered as incomplete and will be Rejected Summarily. (f)The available bid capacity of tenderer shall be assessed based on the details submitted by the tenderer. In case, the available bid capacity is lesser than estimated cost of work put to tender, his offer shall not be considered even if he has been found eligible in other eligibility criteria /tender requirement. NOTE:- Date of inviting tender shall be the date of publishing tender notice on IREPS website.
1.4Credentials if submitted in foreign currency shall be converted into Indian currency i.e., Indian Rupee as under: The conversion rate of US Dollars into Rupees shall be the daily representative exchange rates published by the Reserve Bank of India or entity authorized by RBI to do so for the relevant date or immediately previous date for which rates have been published. Where, relevant date shall be as on the last day of month previous to the one in which tender is invited. In case of any other currency, the same shall first be converted to US Dollars as on the last day of month previous to the one in which tender is invited, and the amount so derived in US Dollars shall be converted into Rupees at the aforesaid rate. The conversion rate of such currencies shall be the daily representative exchange rates published by the International Monetary Fund for the relevant date or immediately previous date for which rates have been published. Explanation for clause 1 including clause-1.1 to 1.4 - Eligibility Criteria: 1.Substantially completed work means an ongoing work in which payment equal to or more than 90% of the present contract value {excluding the payment made for adjustment of Price Variation (PVC), if any} has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender. 2.In case a work is started prior to 07 (seven) years, ending last day of month previous to the one in which tender is invited, but completed in last 07 (seven) years, ending last day of month previous to the one in which tender is invited, the completed work shall be considered for fulfillment of credentials. 3. If a work is physically completed and completion certificate to this extent is issued by the concerned organization but final bill is pending, such work shall be considered for fulfillment of credentials. 4.In case of completed work, the value of final bill (gross amount) including the PVC amount (if paid) shall be considered as the completion cost of work. In case final bill is pending, only the total gross amount already paid including the PVC amount (if paid) shall be considered as the completion cost of work. In case of substantially completed work, the total gross amount already paid including the PVC amount (if paid), as mentioned in the certificate, shall be considered as the cost of substantially completed work. 5.If a bidder has successfully completed a work as subcontractor and the work experience certificate has been issued for such work to the subcontractor by a Govt. Organization or Public listed company as defined in Note for item-1.1 above, the same shall be considered for the purpose of fulfillment of credentials. 6.In case a work is considered similar in nature for fulfillment of technical credentials, the overall cost including the PVC amount (if paid) of that completed work or substantially completed work, shall be considered and no separate evaluation for each component of that work shall be made to decide eligibility.
7.In case of newly formed partnership firm, the credentials of individual partners from previous propriety firm(s) or dissolved previous partnership firm(s) or split previous partnership firm(s), shall be considered only to the extent of their share in previous entity on the date of dissolution / split and their share in newly formed partnership firm. For example, a partner A had 30% share in previous entity and his share in present partnership firm is 20%. In the present tender under consideration, the credentials of partner A will be considered to the extent of 0.3*0.2*value of the work done in the previous entity. For this purpose, the tenderer shall submit along with his bid all the relevant documents which include copy of previous partnership deed(s), dissolution deed(s) and proof of surrender of PAN No.(s) in case of dissolution of partnership firm(s) etc. 8.In case of existing partnership firm, if any one or more partners quit the partnership firm, the credentials of remaining partnership firm shall be re-worked out i.e., the quitting partner(s) shall take away his credentials to the extent of his share on the date of quitting the partnership firm (e.g. in a partnership firm of partners A, B & C having share 30%, 30% & 40% respectively and credentials of Rs.10 crore; in case partner C quits the firm, the credentials of this partnership firm shall remain as Rs.6 crore). For this purpose, the tenderer shall submit along with his bid all the relevant documents which include copy of previous partnership deed(s), dissolution deed(s) and proof of surrender of PAN No.(s) in case of dissolution of partnership firm(s) etc. 9.In case of existing partnership firm if any new partner(s) joins the firm, without any modification in the name and PAN/TAN No of the firm, the credentials of partnership firm shall get enhanced to the extent of credentials of newly added partner(s) on the same principles as mentioned in item-6 above. For this purpose, the tenderer shall submit along with his bid all the relevant documents which include copy of previous partnership deeds, dissolution/splitting deeds and proof of surrender of PAN No.(s) in case of dissolution of partnership firm etc. 10.Any partner in a partnership firm cannot use or claim his credentials in any other firm without leaving the partnership firm i.e., In a partnership firm of A&B partners, A or B partner cannot use credentials of partnership firm of A&B partners in any other partnership firm or propriety firm without leaving partnership firm of A&B partners. 11.In case a partner in a partnership firm is replaced due to succession as per succession law, the proportion of credentials of the previous partner will be passed on to the successor. 12.If the percentage share among partners of a partnership firm is changed, but the partners remain the same, the credentials of the firm before such modification in the share will continue to be considered for the firm as it is without any change in their value. Further, in case a partner of partnership firm retires without taking away any credentials from the firm, the credentials of partnership firm shall remain the same as it is without any change in their value.
13. In a partnership firm "AB" of A&B partners, in case A also works as propriety firm "P" or partner in some other partnership firm "AX", credentials of A in propriety firm "P" or in other partnership firm "AX" earned after the date of becoming a partner of the firm AB shall not be added in partnership firm "AB". 14.In case a tenderer is LLP, the credentials of tenderer shall be worked out on above lines similar to a partnership firm. 15.In case company 'A' is merged with company 'B', then company 'B' would get the credentials of company 'A' also.
1.1Technical Eligibility Criteria: The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender. OR Two similar works each costing not less than the amount equal to 40% of advertised value of the tender. OR One similar work costing not less than the amount equal to 60% of advertised value of the tender, Similar nature of work for the purpose of eligibility criteria under 1.1 above shall mean: Erection and Commissioning/ Modification/ Augmentation/ Operation/ Maintenance/AMC Replacement of equipment on 25KV and/ or 2x25KV traction substation/Sectioning and Paralleling post/Sub-sectioning and Parallelling Post Or Erection and Commissioning/ Modification/ Augmentation/ Operation/ Maintenance/AMC Replacement of equipment on substation of 66KV or above (As per Electrical/HQ Letter no. Elect/SECR/243/tender policy/4362 Dtd:22.03.25 )
Note for item-1.1: (i)Substantially completed work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price Variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender. (ii)Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Government Organisation, work experience certificate issued by Public Listed Company having average annual turnover of Rs.500 Crore and above in last three financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/ registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed Company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. Offers submitted by Joint Venture are permitted. Eligibility criteria for Joint Venture Firms: Technical, financial eligibility and Bid capacity of the JV shall be adjudged based on satisfactory fulfilment of the following criteria: Technical Eligibility Criteria: The technical eligibility for the work as per para 1.1 above, shall be satisfied by either the 'JV in its own name & style' or 'Lead member of the JV'. Each other (non-lead) member(s) of JV, who is/are not satisfying the technical eligibility for the work as per para 1.1 above, shall have technical capacity of minimum 10% of the cost of work i.e., each non- lead member of JV member must have satisfactorily completed or substantially completed during the last 07 (seven) years, ending last day of month previous to the one in which tender is invited, one similar single work for a minimum of 10% of advertised value of the tender. Note:- (i). Value of a completed work done by a Member in an earlier JV shall be reckoned only to the extent of the concerned member's share in that JV for the purpose of satisfying his/her compliance to the above mentioned technical eligibility criteria in the tender under consideration.
Explanation for clause 1 including clause-1.1 to 1.4 - Eligibility Criteria: 1.Substantially completed work means an ongoing work in which payment equal to or more than 90% of the present contract value {excluding the payment made for adjustment of Price Variation (PVC), if any} has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender. 2.In case a work is started prior to 07 (seven) years, ending last day of month previous to the one in which tender is invited, but completed in last 07 (seven) years, ending last day of month previous to the one in which tender is invited, the completed work shall be considered for fulfillment of credentials. 3. If a work is physically completed and completion certificate to this extent is issued by the concerned organization but final bill is pending, such work shall be considered for fulfillment of credentials. 4.In case of completed work, the value of final bill (gross amount) including the PVC amount (if paid) shall be considered as the completion cost of work. In case final bill is pending, only the total gross amount already paid including the PVC amount (if paid) shall be considered as the completion cost of work. In case of substantially completed work, the total gross amount already paid including the PVC amount (if paid), as mentioned in the certificate, shall be considered as the cost of substantially completed work. 5.If a bidder has successfully completed a work as subcontractor and the work experience certificate has been issued for such work to the subcontractor by a Govt. Organization or Public listed company as defined in Note for item-1.1 above, the same shall be considered for the purpose of fulfillment of credentials. 6.In case a work is considered similar in nature for fulfillment of technical credentials, the overall cost including the PVC amount (if paid) of that completed work or substantially completed work, shall be considered and no separate evaluation for each component of that work shall be made to decide eligibility. 7.In case of newly formed partnership firm, the credentials of individual partners from previous propriety firm(s) or dissolved previous partnership firm(s) or split previous partnership firm(s), shall be considered only to the extent of their share in previous entity on the date of dissolution / split and their share in newly formed partnership firm. For example, a partner A had 30% share in previous entity and his share in present partnership firm is 20%. In the present tender under consideration, the credentials of partner A will be considered to the extent of 0.3*0.2*value of the work done in the previous entity. For this purpose, the tenderer shall submit along with his bid all the relevant documents which include copy of previous partnership deed(s), dissolution deed(s) and proof of surrender of PAN No.(s) in case of dissolution of partnership firm(s) etc.
8.In case of existing partnership firm, if any one or more partners quit the partnership firm, the credentials of remaining partnership firm shall be re-worked out i.e., the quitting partner(s) shall take away his credentials to the extent of his share on the date of quitting the partnership firm (e.g. in a partnership firm of partners A, B & C having share 30%, 30% & 40% respectively and credentials of Rs.10 crore; in case partner C quits the firm, the credentials of this partnership firm shall remain as Rs.6 crore). For this purpose, the tenderer shall submit along with his bid all the relevant documents which include copy of previous partnership deed(s), dissolution deed(s) and proof of surrender of PAN No.(s) in case of dissolution of partnership firm(s) etc. 9.In case of existing partnership firm if any new partner(s) joins the firm, without any modification in the name and PAN/TAN No of the firm, the credentials of partnership firm shall get enhanced to the extent of credentials of newly added partner(s) on the same principles as mentioned in item-6 above. For this purpose, the tenderer shall submit along with his bid all the relevant documents which include copy of previous partnership deeds, dissolution/splitting deeds and proof of surrender of PAN No.(s) in case of dissolution of partnership firm etc. 10.Any partner in a partnership firm cannot use or claim his credentials in any other firm without leaving the partnership firm i.e., In a partnership firm of A&B partners, A or B partner cannot use credentials of partnership firm of A&B partners in any other partnership firm or propriety firm without leaving partnership firm of A&B partners. 11.In case a partner in a partnership firm is replaced due to succession as per succession law, the proportion of credentials of the previous partner will be passed on to the successor. 12.If the percentage share among partners of a partnership firm is changed, but the partners remain the same, the credentials of the firm before such modification in the share will continue to be considered for the firm as it is without any change in their value. Further, in case a partner of partnership firm retires without taking away any credentials from the firm, the credentials of partnership firm shall remain the same as it is without any change in their value. 13. In a partnership firm "AB" of A&B partners, in case A also works as propriety firm "P" or partner in some other partnership firm "AX", credentials of A in propriety firm "P" or in other partnership firm "AX" earned after the date of becoming a partner of the firm AB shall not be added in partnership firm "AB". 14.In case a tenderer is LLP, the credentials of tenderer shall be worked out on above lines similar to a partnership firm. 15.In case company 'A' is merged with company 'B', then company 'B' would get the credentials of company 'A' also.
4 conditions · 3 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
As per format given in Annexure-III & ANNEXURE VI of tender document duly verified by Chartered Accountant.
Certificate as per Annexure-V and V(A) of Tender Document.
Declaration or an undertaking from the tenderer(s) that he is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which he or JV in which HUF was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause-62 of the General Conditions of Contract.
Design, supply, erection, testing and Commisioning of 01 nos 132 KV TSS at Belpahar , 02 nos SP at ( DAO & JSG), 05 nos SSP at ( KRL,JMG,HGR,LJKR,BRJN) in connection with 2x25 KV upgradation project between Kortalia to Jharsuguda section in Bilaspur Div. of South East Central Railway.
CPM-ELECT-PSI-2026-27-01
CPM-ELECT-PSI-2026-27-01
Open
Works - General
18 Months
Bilaspur, Chhattisgarh
₹0
₹96.6 L
5 May 2026
2 Apr 2026
21 Apr 2026
800 items across 6 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | 1.00 | — | — | ||
| Preparation of Design and Drawing ( all types ) for traction sub station ( four lines ) 2x25kv , as per RDSO spec and approved GPSD . | — | — | — | 1,72,257 | |
| — | 200.00 | — | — | ||
| Control room for TSS with all type civil and sanitary works as per approved GAD . | — | — | — | 36,20,400 | |
| — | 40.00 | — | — | ||
| Concrete for foundation and trench in hard soil. | — | — | — | 2,76,880 | |
| — | 20.00 | — | — | ||
| Concrete for foundation and trench in rock. | — | — | — | 1,61,180 | |
| — | 300.00 | — | — | ||
| Concrete for foundation and trench in other than hard soil and rock. | — | — | — | 16,65,900 | |
| — | 100.00 | — | — | ||
| Reinforced concrete for foundation, cable trench and baffle wall. | — | — | — | 8,93,300 | |
| — | 100.00 | — | — | ||
| Reinforced concrete for cable trench covers. | — | — | — | 1,68,200 | |
| — | 100.00 | — | — | ||
| Plastering of brick work. | — | — | — | 15,900 | |
| — | 100.00 | — | — | ||
| Brick work for oil sump/pit/apron & retaining wall. | — | — | — | 3,42,800 | |
| — | 70.00 | — | — | ||
| Supply of galvanization s t e e l structure including Traction mast, main masts, fabricated steel other than mast, SPS, Tower gantries ,portal, supporting structures & small part steel work. | — | — | — | 94,26,900 | |
| — | 70.00 | — | — | ||
| Erection of galvanization s t e e l structure including Traction mast, main masts, fabricated steel other than mast, SPS, Tower gantries ,portal, supporting structures & small part steel work. | — | — | — | 4,82,580 | |
| — | 2.00 | — | — | ||
| E r e c t io n , testing and commissioning of 1 3 2 kV/2x25 kV, 60/84/100MVA ONAN/ONAF/OFAF Three phase Scott connection power transformer with Bushing CTs. | — | — | — | 1,13,85,862 | |
| — | 4.00 | — | — | ||
| Erection, testing and commissioning of 12.3 MVA, 54 KV/27KV50 Hz Autotransformer with bushing CT oil and other equipment as per RDSO specification suitable for 2x25KV AT feeding system. | — | — | — | 23,98,920 | |
| — | 4.00 | — | — | ||
| Supply of 132 kV/1250 A Triple pole Isolator with earthing blade | — | — | — | 10,82,056 | |
| — | 4.00 | — | — | ||
| Erection of 132kV/1250 A Triple pole Isolator with earthing blade. | — | — | — | 55,444 | |
| — | 1.00 | — | — | ||
| Supply and erection of 132 kV/1250 A Triple pole Isolator for Bus Coupler. | — | — | — | 2,91,085 | |
| — | 4.00 | — | — | ||
| Supply and erection of 50 kV double pole Isolator. (With Insulator) | — | — | — | 12,30,172 | |
| — | 2.00 | — | — | ||
| Supply, of 132kV Triple pole SF-6 Circuit Breaker with interlocked. | — | — | — | 18,71,340 | |
| — | 2.00 | — | — | ||
| Installation, testing and commissioning of 132kV Triple pole SF6 Circuit breaker with interlocked. | — | — | — | 93,566 | |
| — | 12.00 | — | — | ||
| Supply of 132KV current transformer for transformer metering and protection. | — | — | — | 16,03,044 | |
| — | 12.00 | — | — | ||
| Erection of 132KV current transformer for transformer metering and protection. | — | — | — | 16,020 | |
| — | 800.00 | — | — | ||
| Supply and erection 132KV, 2X25kV system connectors, bus splices & all type TEE Connectors etc. required for commissioning of TSS as per explanatory note. | — | — | — | 20,24,000 | |
| — | 12.00 | — | — | ||
| Supply & erection of 120kV lightning arrestors. | — | — | — | 2,30,028 | |
| — | 1.00 | — | — | ||
| Supply of Control & Relay panel incorporating Numerical type protective relays for TSS suitable for Scott connected Power Transformer (Four lines) as per RDSO spec and approved GPSD. | — | — | — | 2,34,74,550 | |
| — | 1.00 | — | — | ||
| Erection, testing and commissioning of Control & Relay panel incorporating Numerical type protective relays for TSS suitable for Scott connected Power Transformer (Four line). | — | — | — | 9,61,983 | |
| — | 150.00 | — | — | ||
| Supply and erection of 50/39mm tubular aluminum busbar. (As per site requirement) | — | — | — | 1,01,700 | |
| — | 48.00 | — | — | ||
| Supply and erection of 132kV termination with disc insulators with adjuster complete(Zebra Conductor). | — | — | — | 9,84,240 | |
| — | 24.00 | — | — | ||
| Supply and erection of 132KV support insulators for TP Isolator and Post insulators. | — | — | — | 2,97,696 | |
| — | 400.00 | — | — | ||
| Supply, erection of ACSR Zebra Conductor of size 28.62mm dia. (As per site requirement) | — | — | — | 2,22,000 | |
| — | 350.00 | — | — | ||
| Supply, erection of 50kV Burisma's AAAC Conductor of size 36mm dia(768sqmm).(As per site requirement) | — | — | — | 3,38,450 | |
| — | 100.00 | — | — | ||
| Supply and erection of AAC Spider jumper. | — | — | — | 67,100 | |
| — | 1.00 | — | — | ||
| Supply, erection, testing and commissioning of Automatic Fault Locator (AFL) for 2x25 KV AC traction system based on Auto transformer neutral current ratio for SP, SSP and TSS. | — | — | — | 51,56,690 | |
| — | 6.00 | — | — | ||
| Supply and erection of 132/220 kV single phase oil filled Outdoor Type PT of ratio 132 root 3kV/100 r3V or 220/r3 kV/110 r3 class 02 VA as per latest grid code/ metering regulations/ amendments of concerned authority class 0.2 s, 10VA as per latest grid code/ metering regulations/ amendments to regulation of concerned authority. | — | — | — | 8,38,074 | |
| — | 4.00 | — | — | ||
| Supply, erection, testing and commissioning 50KV Double pole, SF-6 type circuit breaker with interlocking . | — | — | — | 16,87,364 | |
| — | 8.00 | — | — | ||
| Supply, erection of 50 KV Current transformer (1500-750/5A). | — | — | — | 21,91,984 | |
| — | 4.00 | — | — | ||
| Supply, erection of 50/55kv Double pole Isolator (without insulator) | — | — | — | 16,46,472 | |
| — | 8.00 | — | — | ||
| Supply and erection of 60KV lighting arrestor. | — | — | — | 5,05,408 | |
| — | 16.00 | — | — | ||
| Supply and erection 50KV support insulators or 66 kV support Insulator(As per site requirement) | — | — | — | 4,30,960 | |
| — | 12.00 | — | — | ||
| Supply and erection of 50 kV termination with adjuster complete with disc insulators. | — | — | — | 3,29,460 | |
| — | 26.00 | — | — | ||
| "Supply, Erection, Testing and Commissioning o f 25 KV DP Isolator 2000 Amp (Manual)" | — | — | — | 30,18,444 | |
| — | 1.00 | — | — | ||
| "Supply, Erection, Testing and Commissioning of 25 KV DP Isolator 2000 Amp (Motorized)" | — | — | — | 1,35,518 | |
| — | 12.00 | — | — | ||
| Supply & Erection of 25KV Double pole Vacuum Circuit Breaker (VCB) | — | — | — | 1,46,38,644 | |
| — | 12.00 | — | — | ||
| Supply and Erection of 25KV, 1500/750/5 amps , class ps Current Transformer (25KV CT) with accessories as per RDSO spec. | — | — | — | 12,39,192 | |
| — | 5.00 | — | — | ||
| "Supply, erection, testing and commissioning 25 interrupter". | — | — | — | 51,73,680 | |
| — | — | — | double pole | ||
| — | 4.00 | — | — | ||
| Supply, Erection, Testing and Commissioning of Series reactor for low loss. | — | — | — | 13,15,920 | |
| — | 4.00 | — | — | ||
| Supply, Erection, Testing and Commissioning of Shunt capacitor 2400 kVAR at 25kV | — | — | — | 10,58,908 | |
| — | 18.00 | — | — | ||
| Supply and erection of 42 KV Lightening Arrester. | — | — | — | 7,62,930 | |
| — | 8.00 | — | — | ||
| Supply and erection of 27.5 kV /110 V Potential transformer (type-II)(52 kV insulation class) | — | — | — | 9,36,456 | |
| — | 14.00 | — | — | ||
| Supply, erection, testing and commissioning 25 KV Potential transformer (PT)Type-I | — | — | — | 14,00,966 | |
| — | 4.00 | — | — | ||
| Supply and erection of 25 KV Neutral Current transformer (2/1A & 5/1A ) as per RDSO spec | — | — | — | 7,19,080 | |
| — | 4.00 | — | — | ||
| Supply and erection of 25 KV current transformer 400- 200/5 amp as per RDSO spec. | — | — | — | 7,28,188 | |
| — | 2.00 | — | — | ||
| Supply, Erection, transformer with all accessories. | — | — | — | 5,27,382 | |
| — | — | — | volt LT | ||
| — | 2.00 | — | — | ||
| Supply, Erection, testing and commissioning of 25 KV DO fuse switch Assembly. | — | — | — | 42,768 | |
| — | 8.00 | — | — | ||
| Supply and erection of Guy rod with Complete Set assembly | — | — | — | 95,528 | |
| — | 6.00 | — | — | ||
| Supply of 9 Ton suspension insulator for along feeder. | — | — | — | 83,364 | |
| — | 6.00 | — | — | ||
| Supply and erection of Al. along feeder (components) for termination. | — | — | — | 69,096 | |
| — | 1.00 | — | — | ||
| Supply and erection of Aluminum feeder wire 234sqmm | — | — | — | 2,36,480 | |
| — | 200.00 | — | — | ||
| Supply and Erection of 38.25mm dia (865 mm2) AAC Bull conductor | — | — | — | 95,000 | |
| — | 1.00 | — | — | ||
| Supply and installation of 250 AH, 110 V low maintenance lead acid (LMLA) batteries set with 2 nos. of suitable battery charger (1 set = 1 battery set & 2 nos. battery charger). battery charger. Battery as per RDSO spec. | — | — | — | 6,43,639 | |
| — | 750.00 | — | — | ||
| Supply, fabrication, painting and fixing of MS angle iron for supporting cable. | — | — | — | 78,000 | |
| — | 80.00 | — | — | ||
| Supply, laying and fixing of heavy duty ISI marked 'B' class GI pipe of 3.65mm wall thickness and 50mm dia to be laid along the wall or floor with proper galvanized clamps/ through the wall or underneath the floor in cement concrete as per explanatory note. | — | — | — | 38,960 | |
| — | 300.00 | — | — | ||
| Supply and erection of fencing panel and Gate at substation for TSS. | — | — | — | 10,38,000 | |
| — | 6.00 | — | — | ||
| Supply & erection of fencing up right. | — | — | — | 4,44,186 | |
| — | 500.00 | — | — | ||
| Supply & erection of anti climbing device at substation.. | — | — | — | 1,78,500 | |
| — | 1.00 | — | — | ||
| Supply and erection of various type Compete required set of indication boards & caution boards as per RDSO requirement for TSS | — | — | — | 2,98,749 | |
| — | 4.00 | — | — | ||
| Erection , testing and commissioning of Buried Earth Rail (13mtr) include earth electrode and accessories. | — | — | — | 2,99,984 | |
| — | 4.00 | — | — | ||
| Transportation of 13mr. (52/60kg) released long rail piece from nominated place within 10 KM area to work site and erection. | — | — | — | 32,392 | |
| — | 100.00 | — | — | ||
| SETC of 25KV support insulators (As per site requirement). | — | — | — | 6,28,400 | |
| — | 100.00 | — | — | ||
| Supply and erection of copper strip for equipment earthing. | — | — | — | 86,400 | |
| — | 50.00 | — | — | ||
| Supply and erection of Copper jumper (50 sq mm). | — | — | — | 2,12,700 | |
| — | 2000.00 | — | — | ||
| Supply of PVC insulated and sheathed copper unarmored cable size 7 core 2.5sqmm. | — | — | — | 2,04,000 | |
| — | 2000.00 | — | — | ||
| Erection of PVC insulated and sheathed copper unarmored cable size 7 core 2.5sqmm. | — | — | — | 24,000 | |
| — | 1000.00 | — | — | ||
| Supply of PVC insulated and sheathed copper unarmored cable size 10 core 2.5sqmm. | — | — | — | 2,21,000 | |
| — | 1000.00 | — | — | ||
| Erection of PVC insulated and sheathed copper unarmored cable size 10 core 2.5sqmm. | — | — | — | 12,000 | |
| — | 2000.00 | — | — | ||
| Supply of PVC insulated and sheathed copper unarmored cable size 4x4sqmm. | — | — | — | 1,92,000 | |
| — | 2000.00 | — | — | ||
| Erection of PVC insulated and sheathed copper unarmored cable size 4x4sqmm. | — | — | — | 20,000 | |
| — | 2000.00 | — | — | ||
| Supply of PVC insulated and sheathed copper unarmored cable size 2x4sqmm. | — | — | — | 1,32,000 | |
| — | 2000.00 | — | — | ||
| Erection of PVC insulated and sheathed copper unarmored cable size 2x4sqmm. | — | — | — | 20,000 | |
| — | 3000.00 | — | — | ||
| Supply of PVC insulated and sheathed copper unarmored cable size 2x2.5sqmm. | — | — | — | 2,49,000 | |
| — | 3000.00 | — | — | ||
| Erection of PVC insulated and sheathed copper unarmored cable size 2x2.5sqmm. | — | — | — | 30,000 | |
| — | 500.00 | — | — | ||
| Supply, of Al. XLPE Cable 2 core 300 Sq.mm | — | — | — | 3,56,500 | |
| — | 500.00 | — | — | ||
| Laying, testing and commissioning of Al. XLPE Cable 2 core 300 Sq.mm | — | — | — | 29,000 | |
| — | 60.00 | — | — | ||
| Supply & erection of Earth electrode (4mtr) as per RDSO spec. | — | — | — | 2,75,880 | |
| — | 800.00 | — | — | ||
| Supply and erection of earth bus 75x8 mm. MS strip laid in the ground. | — | — | — | 3,16,800 | |
| — | 700.00 | — | — | ||
| Supply and erection of earth bus 75x8 mm. MS strip laid exposed. | — | — | — | 2,69,500 | |
| — | 300.00 | — | — | ||
| Supply and erection of earth bus 50x6 mm laid in the ground. | — | — | — | 69,000 | |
| — | 200.00 | — | — | ||
| Supply and erection of earth bus 50x6 mm.MS strip laid exposed. | — | — | — | 45,200 | |
| — | 115.00 | — | — | ||
| Supply and Erection of 8 SWG GI wire for earthing. | — | — | — | 4,255 | |
| — | 1000.00 | — | — | ||
| Supply and Erection of 32 mm dia MS rod for earth mat. | — | — | — | 2,05,000 | |
| — | 1000.00 | — | — | ||
| Supply , erection and termination of earth screen wire of size 19/2.5mm. (As per site requirement) | — | — | — | 2,76,000 | |
| — | 1.00 | — | — | ||
| Supply and installation of 240 V, AC distribution board. for TSS | — | — | — | 63,959 | |
| — | 1.00 | — | — | ||
| Supply and installation of 110 V, DC distribution board. TSS | — | — | — | 1,28,479 | |
| — | 500.00 | — | — | ||
| Supply and spreading of gravel/ballast in the switch yard. | — | — | — | 6,62,500 | |
| — | 12.00 | — | — | ||
| Supply without insulator and erection of materials for termination of copper cross feeder with gantries. | — | — | — | 1,32,504 | |
| — | 22.00 | — | — | ||
| Supply, erection and commissioning of 9 T insulator for cross feeder | — | — | — | 2,90,620 | |
| — | 0.60 | — | — | ||
| Supply and Erection of copper cross feeder wires (37/2.25 mm HDBC) across the track at SP/SSP/FP/BT locations | — | — | — | 6,75,975 | |
| — | 30.00 | — | — | ||
| Supply and erection of large copper jumper 160sqmm cross feeder/isolator and OHE. | — | — | — | 1,75,380 | |
| — | 20.00 | — | — | ||
| Supply and erection of Structure Bonds size ( 50x6 mm) as per site requirement | — | — | — | 16,860 | |
| — | 3.00 | — | — | ||
| Supply and erection of energy meter accuracy of 0.2 s class, 110 V/1A with ABT complete feature including software hardware meter cubical etc. as per latest grid code/ metering regulations/ amendments to regulations of concern authority. | — | — | — | 31,40,643 | |
| — | 1.00 | — | — | ||
| Supply and erection of TSS Name board. | — | — | — | 1,972 | |
| — | 1.00 | — | — | ||
| Supply and erection of Shock treatment chart (laminated). | — | — | — | 3,606 | |
| — | 1.00 | — | — | ||
| Supply and erection of First aid box. | — | — | — | 1,969 | |
| — | 2.00 | — | — | ||
| 40KV Hand gloves Rubber made with suitable insulating rubber for Electrical appliances. | — | — | — | 8,000 | |
| — | 2.00 | — | — | ||
| Supply & Erection of approved Make "Dry chemical powder" type fire extinguisher 5 Kgs capacity confirming to latest IS:2171. | — | — | — | 7,998 | |
| — | 2.00 | — | — | ||
| Supply of CO2 Fire extinguishers 10Kg. | — | — | — | 49,558 | |
| — | 6.00 | — | — | ||
| Supply of Fire buckets 10Ltrs. | — | — | — | 3,276 | |
| — | 2.00 | — | — | ||
| Supply Fire buckets stands for 3 Buckets. | — | — | — | 7,294 | |
| — | 1.00 | — | — | ||
| Supply and erection of Section diagram board. | — | — | — | 16,134 | |
| — | 1.00 | — | — | ||
| Supply and erection of Key box for isolator with lock key. | — | — | — | 18,980 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
4L132KVTSSRDSO-00033-20-1.pdf
ATTACHMENT
4LSSPfor2x25kV.pdf
ATTACHMENT
4LSP-RDSO-00020-20-01ModA_compressed.pdf
ATTACHMENT
ApprovedPSILocPlanofKRLtoJSG2x25kv.pdf
ATTACHMENT
Controlbuildingspssp2X25--0210.pdf
ATTACHMENT
Control Building TSS
ATTACHMENT
JSGsection_compressed_compressed_compressed_compressed- Civil Survey report 1
ATTACHMENT
JSGsection_compressed_compressed_compressed_compressed- Civil Survey report 2
ATTACHMENT
OHEguidelines0042signedandapproved_compressed.pdf
ATTACHMENT
ProposedSTcablesrouteplan_KRL-JSGSection.pdf
ATTACHMENT
ControlRoomofTSSBSP-JSG_compressed_compressed2_compressed.pdf
ATTACHMENT
CivilSurveyReportKRL-JSGsection_compressed_compressed_compressed_compressed-1-50.pdf
ATTACHMENT
CivilSurveyReportKRL-JSGsection_compressed_compressed_compressed_compressed-51-111.pdf
ATTACHMENT
Revised160kmphPSIGuideline25022022.pdf
ATTACHMENT
TI-DRG-PSI-AT-RDSO-00049-21-01_compressed.pdf
ATTACHMENT
RDSOSpecificationforBidNo.CPM_EL_BSP_RIG_CPH_SCSK.pdf
ATTACHMENT
TenderDocumentKRL-JSGPSI.pdf
ATTACHMENT
GPSDJSGTORIGMar26_compressed.pdf
ATTACHMENT
Corrigendum.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .