Providing Improvement works at Goshala 3 belongs to SVVS Devasthanam, Kanipakam

Earth work excavation for foundation and depositing on bank at the place shown by the Engineer in in charge with in the work site including all leads and lifts lab our charges , strutting shoring and de watering in necessary and as directed by the Engineer in charge in all kind of soil mixture off gravel and soft disintegrated rock like shells ordinary gravel , stony at and earth mixed with fair sized boulders.

Filling with Sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work .

Plain Cement concrete (1:4:8) proportion using 40 mm gauge hard broken granite metal from approved quarry including cost and conveyance of all materials, and all labour charges for rage charges on all materials , and all lab our charges for machine mixing concrete, laying concrete in foundation, ramming in layers of 15 cm thick each, finishing top surface to required level neatly water curing etc. complete for finished item.

Cement concrete (1:2:4) proportion using 20 mm gauge hard broken granite metal from approved quarry including cost and conveyance of all materials, and all labour charges for rage charges on all materials , and all lab our charges for machine mixing concrete, laying concrete in foundation, ramming in layers of 15 cm thick each, finishing top surface to required level neatly water curing etc. complete for finished item.

Brick Masonry for partition walls (230 mm thick) in CM (1:6) prop.(Cement:Sand) using Bricks second class or ground moulded (Non-Modular or traditional size) 23 x 11 x 7 cm from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, excluding cost of seigniorage charges on all materials, scaffolding charges and all labour charges like mixing cement mortar, lift charges, curing, complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 509 & 501)

Plastering to even surface of walls with 20mm thick in single coat in CM (1:5) finished smooth including cost and conveyance of all materials to site, Cost of seigniorage charges on all materials, all taxes, finishing, curing, scaffolding and all operational, incidental, labour charges etc., including cutting grooves where ever necessary etc., complete for finished item of work. (As per SS 903.) per 10 Sqm.

Supply & Errection of M.S. Pipe made with M.S. Pipes, L-angles, M.S. Plates including cost & conveyance of all materials, labour charges for fabrication and errection including welding charges all incidental cahrges etc., complete for finished item of work and also as directed during execution.

Supply and fixing of Galvalume sheet Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.5mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile length: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours with minimum end of 15 cms etc.,complete as directed during execution.

Painting with synthetic enamil paint of approved colour and make 2 coas over primary coat (totally 3 coats) to the new Iron work including cost and conveyance of all materials, labour charges, curing and all incidential charges etc., complete. BLD CSTN -10-12

Providing, laying Reinforced cement concrete Hume pipes of300mm Dia., NP-4 class for pipe culverts including cost and conveyance of Pipes etc., complete and Labour charges for laying, jointing of 300 mm dia. R.C.C Hume pipes in position including lifting, aligning, lowering and hoisting etc., as per drawing and as per MoRT&H Specification 2900, 2905 and 2906 (5th Revision) and IRC Special Publication No: 13 and as directed by the Engineer-in-Charge for finished item of work.

Supply and fixing of 50 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings ,welding & labour charges complete

Supply and fixing of Hot dipped Galvanised Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979: 4"x4" (102 mm x 102 mm) -8 Gauge.