PROVISION OF CERTAIN WORKS SERVICES FOR CERTAIN TECHNICAL BUILDINGS AT AF STATION BAREILLY

Amount

Excavating in trenches (manual excavation), n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out on soft and loose soil complete all as specified and directed.

Excavation in trenches in Soft/Loose soil not exceeding 1.5 mtr wide and exceeding 1.5 mtr but not exceeding 3 mtr in depth and getting out all as required for laying of cables, foundation filling of poles or stays all as specified and directed.

Earthwork in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm in depth but not exceeding 1.5 m, in width as well as 10 sqm on plan) including getting out in all kind of soils and disposal of excavated earth lead up to 50m and lift upto 3.00m as directed by Eng-in-charge)

All as per SI No. 03 here-in-above but exc 3.0 m deep and n exc 4.5 m deep and -ditto-

All as per SI No. 03 here-in-above but exc 4.5 m deep and n exc 6.0 m deep and -ditto-

All as per SI No. 03 here-in-above but exc 6.0 m deep and n exc 7.5 m deep and -ditto-

M&L Cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L Cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete etc complete all as specified and directed.

M&L Fly ash Brick work with old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for Brick work with burnt clay sub class 'B' bricks old sized curved on planwith mean radius exc 6m mean radius built in cm 1:4 complete as specified and directed.

M&L for Brick work with burnt clay sub class 'B' bricks old sized curved on planwith mean radius n exc 6m with bricks roughly cut to radius or bricks with wedge shaped jointed in cm 1:4 as specified and directed.

M&L for 40mm thick DPC with PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) mixed with IWPC @3% by weight of cement incl uding applying evenly a coat of blown type bitumen @ of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 Cum per Sq.m and Supplying & Laying Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m complete all as specified and directed.

M&L for Fly ash Brickwork with old size bricks, straight or curved on plan to any radius in half brick thick walls built in cm 1:4 and complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming, in layers not exc 25 cm complete all as specified and directed

Removing excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Removing surplus excavated soil to a distance exc. 1.50 km but n exc. 5 km and depositing where directed complete all as specified & directed.

M&L Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, lintel bands, horizontal or sloping, and similar work for fair finished surfaces of concrete. as specified and directed.

M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished flat surfaces of concrete complete all as spd and direceted.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick for fair finished surfaces (Horizontal or sloping) complete all as specified and directed.

M&L for Formwork to flat surfaces of sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finish surfaces of concrete complete all as spd and directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surfaces complete all as spd and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 6mm to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 23 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders and all as specified and directed.

M&L for reinforced cement concrete M-25 Design Mix (using 20mm graded crushed stone aggregate ) in Slabs supported on walls, beams, lintels/bands and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

M&L for RCC M-25 Design Mix (using 20mm graded crushed stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

M&L for RCC M-25 Design Mix (using 20mm graded crushed stone aggregate) as in Columns, pillars, piers, posts and struts compete all as spd & directed.

M&L 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded cushed stone aggregate) as in sub base of floor complete all as specified and directed.

M&L for 100 mm thick (compacted thickness) PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base of road complete all as specified and directed.

M&L for 150 mm thick (compacted thickness) PCC M-25 design mix (using 20mm graded crushed stone aggregate) as in pavement/floor casted in panels complete all as directed.

M&L for Finishing the surface concrete by brooming withoout using extra cement while the concrete is green complete all as specified and directed.

ML for PVC dividing strips, 5mm thick and 48 mm wide fixed in PCC flooring complete all as specified and directed.

M&l for plain cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps;seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating incl all necessary formwork etc complete all as directed

M&L for 20mm thick plastering on fair faces of concrete roof surface in CM 1:4 mixed with IWPC @3% by weight of cement finished even and smooth without using extra cement (IWPC shall be measured and paid for separately) complete all as specified and directed.

S&F Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth and complete all as specified and directed.

S&F 15mm bore steel water tubing medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

S&F 20 mm bore steel water tubing medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

S&F for rotational moulded polyethylene water storage tank (three layered) of capacity 1000 liters (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F 18 mm thick pre-polished granite slab as in urinal partition, cut to size / shape as required, chamfering the edges etc, embedded in wall to a depth of 50 mm duly grouted in cement mortar and finishing the surfaces complete all as specified and directed.

S&F 110 mm bore dia PVC (SWR) pipes (IS 13592- 2013)single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) of dia 75 mm bore pipes (IS 13592- 2013) single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) of dia 75 mm bore pipes (IS 13592- 2013) single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S&F 110 mm bore dia PVC (SWR) junction single, (Single T) equal or unequal with access door (IS 13592- 2013) complete all as specified and directed.

S&F 110mm bore dia PVC (SWR) heel rest bend (IS 13592- 2013) of any radius complete all as specified and directed.

S&F 75mm bore dia PVC (SWR) junction on single, (Single T) equal or unequal (IS 13592- 2013) complete all as specified and directed.

S&F 75mm bore dia PVC (SWR) bends of any radius with access door (IS 13592- 2013) complete all as specified and directed.

S&F 75 mm bore dia PVC (SWR) heel rest bend of any radius (IS 13592- 2013) complete all as specified and directed.

S&F PVC (SWR) vent cowl for 75mm bore dia of pipe (IS 13592- 2013) complete all as specified and directed.

S&F PVC (SWR) floor trap, plain with PTMT grating including jointing with solvent cement for 75mm dia of outletcomplete all as specified and directed.

S&F Grating doom 125 mm dia with waste hole of PTMT.(Minimum weight 40gms) complete all as specified and directed.

M&L 15mm thick Cement plastering in cm 1:4 mixed with IWPC @3% by weight of cement (IWPC shall be measured and paid for seperately) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Supply only Integral water proofing compound (IWPC) complete all as specified and directed.

M&L cement plastering 15mm thick in cm 1:4 on fair faces of brickwall or concrete surfaces finished fair and even complete all as specified and directed.

M&L for preperation of new surfaces of ceilings, and three coats of white wash over 5mm thik cement plaster of cm 1:4 on ceillings and all as specified and directed.

M&L for 10mm thick Plastering in CM 1:6 on other than fair faces of brick wall or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 10mm thick Plastering in cm 1:4 on other than fair faces of brick wall or concrete surfaces finished fair & even complete all as specified and directed.

M&L for 10mm thick Cement plastering in cm 1:4 on fair faces of brick work or concrete surfaces finished fair & even complete all as spd and directed.

M & L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified & directed.

S&F 20mm thick granite stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 20 mm thick screed bed or bedding layer of cement mortar (1:4) for laying floor finishes, chamfering/bullnosing of edges and grinding and polishing complete all as specified and as directed.

S&F Non - skid concept coloured joint free coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed or bedding layer of CM 1:4 over and including 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) complete all as specified and directed.

M & L for Glazed ceramic colour tiles 7 mm thick in dado/skirting (vertical surface) of size 350 X 250 X 7 mm or 450X 300X 7mm and jointed in neat cement slurry and pointed in white or colour cement over 10mm thick cement plaster in cm 1:4 to match complete all as specified and as directed.

S&F vitreous china wash down water closet pan (Pedestal pattern) white excluding flushing cistern and flush pipe including white plastic seat cover closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as spedcified and directed.

S&F Vitreous China counter top wash basin,oval type, white fixed on granite slab complete all as specified and directed.(Granite slab shall be measured & paid for separately)

S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F 10 litres capacity PVC, valveless. Syphonic action type, flushing cistern, low level, white with inlet, ball valve, float, 32mm dia PVC flush pipe and brackets fixed to wall and jointing to WC complete all as specified and directed.

S&F PVC waste pipe 900mm long with threaded cup suitable for 32mm dia couplings for urinals and wash hand basinscomplete all as specified and directed.

S&F Toilet paper holder,brass chrome plated, box type , fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F Shelf (Soap dish) of PTMT fixed with and incl CP Brass screws and wooden/ plastic cleats (Min weight 300 gms) complete all as specified and directed.

S&F 32mm dia waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed.

S&F CP Fancy type stop valves/ angle stop valve, cast copper alloy, screwed down, high pressure, with castan head, screwed both ends for iron pipe or for unions and fixed for 15 mm bore complete all as specified and directed.

S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for bore 15mm complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S & F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F 5.50mm thick looking mirror 600x450mm size of approved quality fixed to walls with suitable stainless steel brackets and screws complete all as specified and directed.

M&L 15mm dia Fancy type chromium plated Bib taps, cast copper alloy with capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F CP health faucet, Jaquar, Allied series 15mm dia complete all as specified and directed.

Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M & L for preparation of newly plastered surface of wall and applying two coats of cement base paint (Camouflage paint), one base coat with two additional coats of camouflage pattern) complete including all as specified and as directed. Note : Colour scheme and design shall be as per existing wall

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F PTMT hinges of size 100mm complete all as specified and as directed.

S&F Aluminium handles, cast type, anodised of size 100mm complete all as specified and as directed.

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F 150mm Aluminium anodised, barrel tower bolts of extruded section and complete all as specified and as directed.

S&F Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified complete all as specified.

S&F 3mm thick pin head type glass area n.exc 0.50sqm each pane & fixed to aluminium ventilators complete all as specified and as directed.

M&L for Hardcore of broken stone and boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface and complete all as specified and as directed.

M&L for 250 mm thick (compacted thickness) Hardcore of broken stone or boulders of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 10 cm thick each layer, watered and rolled with 8 to 12 ton power roller to a true surface to required gradient and camber as required complete all as specified and directed.

M&L for 250 mm thick (compacted thickness) PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base of road complete all as specified and directed.

M&L for 250 mm thick (compacted thickness) PCC, M-25 design mix (using 20mm graded crushed stone aggregate) casted in panels as in pavement of road incl all necessary formwok complete all as specified & directed.

S & F for gun metal gate valve of 20 mm dia bore (class-1, 1.5 Mpa) with ISI mark and iron wheel head, screwed both ends to GI pipes complete all as specified and directed.

M&L for forming 12 mm wide expansion joint , filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound grade 'A' for 250 mm thick concrete slab and complete all as specified and directed.

M&L for Forming Construction joint 10mm wide and 30mm deep by cutting with diamond cutter and filled with sealing compound Grade 'A' complete all as specified and directed.

ML for forming Contraction(Dummy) joint 65mmx10mm wide by cutting with diamond cutter and filled by sealing compound grade 'A' complete all as specified and directed.

S & F for 20 mm dia ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

M&L for 50mm thick plain cement concrete (PCC) 1:2:4 type B1 (20mm graded aggregate) in plinth protection fair finished complete all as specified and directed.

M&L for forming butt joints in plinth protection 10mm wide and 75mm deep and filled with bituminous filler of 1 part of bitumen and 3 part of sand and complete all as specified and as directed.

S&F Steel rolling shutters (1mm thick laths) , fitted with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, gear operated type with bevel gear box and crank handleall as spcified in SSR patt-I clause No 10.23 to 10.23.4 including cutting holes in cement concrete or brick wall built in cm for securing hold fasts, PCC 1:2:4 in bed blocks and making good the surfaces with cm 1:4 complete as specified and direceted.

S&F Safety lever locks mild steel with 4 levers suitable for rolling shutters complete as specified and direceted.

M&L for preparation of new steel surfaces over 10cm in width of girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and as directed.

M & L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exc 0.36sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick bed or bedding layer of of CM 1:4 complete all as specified and directed .

M & L for 15 mm thick Fine fissured board of size 600X600mm mineral fibre accoustic false ceiling tiles CAT Part No 1833 M of ARMSTRONG false ceiling system at any height with back of the duly sanded and finished with a coat of protective paint and front duly finished and fixed to true lock PVC dle KL-24 suspension system (hot dipped galvanised steel section) of exposed T section grid with exposed face powder coated white colour. The suspension system consisting of parameter wall angle of size (24x24) mm of thickness 0.45 mm of GS sheet to secure on walls / partition face with the help of raw plug @ 450 mm c/c universal main runner of T shape section with single rotary stitchng of size (38x24) mm made from 0.35 GS sheet of length 3.6 mtr to be spaced at 1200 mm c/c CRO runner T shape with double rotary stitching of size (30 x 24) mm of length 1200 mm made from 0.25 mm thick GS sheet spaced @ 600 mm c/c (1200 x 600) mm of size modules internmediate T shaped cross runner of size (25 x 24) mm of length 600 mm made of 0.25 mm thickj GS sheet to form (600 x 600) size of module incl suspension of the ceiling frame from the RCC roof/structural member with soffit angle cleat and dash faseners and required member ofg GI suspender of 4 mm thick GI wire and level adjuster all complete and including cost of making opening for light fitting diffusers cut out etc to the required line and shape as per manufacturer recommendations complete all as specified and directed.

S & F Powder coated aluminium frame for doors, windows, ventilators, Partition with one or more rebates including joining cleat for fixing etc with powder coated complete all as specified.

S&F 5 mm thick Aluminium composit panel of approved colour fixed to frame work or door etc complete all as spd and directed.

S&F Aluminium section powder coated of colour as approved doors (two panels) with frame and shutters partly with 5 mm thick reflective glass and partly closed with 5 mm thick aluminium composite panel (alco panel) fixed with aluminium chamfered clip section no 4407 of aluminium door sections all as per Drg No as under : (a) Frame 100x40x2mm section No-2420 (b) Shutter style 85x44.45x1.7mm thick section 4546 (i) Top rail 14.30x44.45x1.7mm thick section 4553 (ii) Middle rail 83.50x44.45x1.7mm thick section 4565 (iii) Bottom rail 114.30x44.45x1.7mm thick section 4529 (iv) glazing clip powder coated 0.7mm thick section no 4407 (v) Handle aluminium powder coated 250 mm as approved (vi) Tower bolt powder coated 9.90 mm dia & 200mm long section No 4002 (vii) Mortice lock 100mm 7 leverof Godrej make (viii) Hold fast aluminium 100 mm long (ix) Rubber gasket white PVC (x) Namda rope to be fixed in the styles's groove for proper air tightness. Note : Bottom panel shall be with aluminium composit panel & top panel wiyh glass

M&L for Preparation of old plastered surfaces of wall and applying one coat of oil bound distemper complete all as specified and as directed.

M&L for Taking down existing steel gate of size 5.00m x 2.50m (two leaf) without damaging any member of gate with attached hold fasts and repair, replacement of pintle hinges-06 Nos, MS roller-02 Nos , replacement of MS roller track FI-50x10mm grouted with necessary MS hold fasts in floor etc complete in all respect and refixing the gate after repair/replacement in the prepared opening incl one coat of synthetic enamel paint after preparation of surfaces complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articlesand all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings compete all as specified and directed.

S & F for pre-painted Trapezoidal profile galvalume or Zincalume profiled coloured coated steel sheet 0.63mm total thickness (with coting and painting) as in roof covering/cladding, fixed with self tapping screws (make Hilti/Fischer), neoprene and EPDM washers class 3 of AS-3566(5.5-14X5 for crest and 5.5-14X25 for valley fixed) with 150mm end lap and one corrogation side lap whereever required penetrations and lap in sheet shall be sealed by using proper sealant profile/HDPE fillers shall be provided whereever required to close voids between sheets and fastners etc. as in roof covering/ cladding in straight or curved surface in any height complete all as specified and directed. Note : 1. The colour of sheet for bldg shall be approved by GE. 2. Sheeting shall be fixed of any height. Make : Tata Bluescope/ JSW Steel /Llyod Insulation/Everest Industries

S & F Pre- painted factory made profiled galvalume aluminum zinc coating GI based ridges of 0.63 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and all as specified and directed.

Demolition of unreinforced cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) by mechanical tools and disposal of debries out side the defence land complete all as specified and directed.

Demolition of unre-inforced cement concrete in ground floors and pavings exc 15 cm thickness (below or above ground level) by mecahanical tools and removing the debris out side the defence land complete all as specified and directed.

Surface dressing n exc 15 cm deep and getting out in soft & loose soil complete all as specified & directed.

S & F for steel work in tubler trusses including special shaped washer etc complete ERW or induction butt welded tubes confirming to IS 1161-2014 9 (or) IS-1239(Pt-I) grade St-240 complete all as specified and directed.

M & L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-290 (Gde E-165).complete all as specified and directed.

Excavating over areas (manual excavation), n exc 1.5 m deep and getting out in soft & loose soil all as specified and directed.

Rolling and consolidating formation surfaces in cutting with 8 to 10 ton power rollar complete all as specified and directed.

S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

M & L Cement concrete 1:2:4 type B-1 (20 mm graded crushed stone aggregate as in floor to drain etc including all necessary formworks, moulds etc complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

Add to or deduct from item No124 above, for each 25 mm girth or part thereof over or under 30cm ditto

S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe. 290.Gde-E-165 complete all as specified and direced.

M&L precast reinforced cement concrete 1:2:4 Type B-0 fixed in cm 1:4 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as spd and directed.

M&L for loose filling with aggregate of broken stones of gauge 80 to 200mm in soakage its, soakage wells etc complete all as specified and directed.

M&L for loose filling with bajri/ gravel 5 to 10mm in each layers n exc 15cm thick spreaded, levelled and rammed incl watering complete all as specified and directed.

M&L for coarse Sand (1.5mm to 2mm) filling under floors or in foundations including watering and consolidation in floors or pavings, compplete all as specified and directed.

S&F Rungs,Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as spd and directed.

M&L for Concrete bed to drain pipes 200 mm bore including packing under, and haunching against the sides of pipes complete surrounding after they are laid and tested, in cement concrete 1:4:8 type D2 complete all as specified and directed.

M&L Reinforced concrete pipes, 200 mm bore, class NP-2, laid and jointed complete with collars complete all as specified and directed.

M&L for 150mm bore dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars incl Cement concrete 1:3:6 type C-2 bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Provn of bore hole/well of 250mm dia size pilot bore through any kind of soil strata including hard dense stone/ boulder by means of direct rotary method below ground complete all as specified and directed.

Supply, assembly including jointing, lowering and fixing UPVC pipe 150mm dia (IS-13592-1992, pressure rating 10 kgf/cm2) including fittings and fixures complete all as specified and directed.

Supply,assembly including jointing, lowering and filling slotted UPVC (3mm slot size) pipe casing 150mm dia (IS-13592-1992) including fittings and fixtures and filling of gap with 3 to 6mm gravel around casing pipe in prepared bore complete all as specified and directed.

Supply,assembly including jointing, lowering and filling slotted UPVC (1.58 mm slot size) pipe casing 150mm dia (IS-13592-1992) including fittings and fixtures and filling of gap with 3 to 6mm gravel around casing pipe in prepared bore complete all as specified and directed.

S&F of PVC well cap of 150mm dia of pipe at the top of casing pipe of bore well with locking arrangement complete all as specified and directed.

S&F of PVC bail plug of 150mm dia of pipe at the top of casing pipe of bore well with fixing arrangement complete all as speciifed and directed.

M & L for Construction of Septic Tank for 25 users including necessary earth work in excavation in soft/loose soil, plain cement concrete 1:2:4 type B-2 ( using 40 mm graded crushed stone aggregate ) as in foundation , brick work (using burnt clay sub class 'B' brick, old sizes) in cement mortar 1:4, reinforced cement concrete M-25 ( design mix) as in slab cover including pre-cast man hole cover slab having 8 mm dia TMT bar reinforcemement @ 75 mm c/c & 6 mm thick mild steel plate embedded all around of cover slab , 15 mm thick plaster in cement sand mortar in 1:4 on wall, vent shaft, sludge chamber , form work to sides and soffits, 150 mm dia RCC NP-02 hume pipe as per IS as inlet & out let pipes up to 3 m from outer face of wall, CI vent pipe, sludge chamber, RCC baffle wall, returning filling & removal etc, complete all as shown on drawings & as specified. Drg No : HQ CE LKO Zone Drg No - TD/217 Sht No -1/1 to 1/2 dated 25/11/1968 Revised on 07/03/2003

M & L for Construction of Soakage well for 2.40 m dia( internal dia ) & 3.00 m (effective depth ) including necessary excavation in earth work in any type of soil , plain cement concrete 1:3:6 type C-2 ( using 40 mm graded crushed stone aggregate ) as in foundation , brick work in cement mortar 1:4 in walls & honey combed brick wall , reinforced cement concrete M-25 ( design mix) as in slab cover including pre-cast cover slab having 8 mm dia TMT bar reinforced , plain cement concrete band and dwarf wall, form work to sides and soffits of RCC slab & filling with brick bats loose filling complete complete all as specified and shown in drawings. Drg No : HQ CE LKO Zone Drg No - TD/576 Sht No -1/1 to 1/2 dated 16/06/1989

M&L for provision of Antistatic polyurethane flooring system comprising of the following including repering of crack complete all as specified and all as per manufaturer's instructions:- (a) Surface Cleaning: Cleaning of surface including construction joints, isolation joints and all the areas by means of grinding or scarifying maachine to make free from dust, foreign materials by mechanical scrubbing/acid washing followed by water washing and dried properly to the extent of moisture content on the surface level not more than 5%. Any pot hole, undulation shall be filled with three component epoxy mortar (ShaliFloor SL UL 3ES/ShaliPatch of STP or equivalent of CIPY/FOSROC/Asian Paint) after application of primer coat of two component epoxy bonding agent (Shaliprime 2 E of STP or equivalent) (b) Flooring Application: (i) Clean the surface from loose dust, dirt etc with the help of grinder and vacum cleanner. (ii) Applying two component moisture insensitive penetrative 2K epoxy primer (Shaliprime 2 E STP or Equivalent of CIPY/FOSROC/Asian Paint) for concrete surface @ 150 to 200 gm per sqm and allow it to dry overnight. (iii) Applying three component self levelling 3K epoxy underlayment base coat (ShaliFloor SLUL 3 ES of STP or Equivalent of CIPY/FOSROC/Asian Paint) of 3mm thick @ 5.5 kg/sqm and leave it for overnight. (iv) Apply self adhesive copper strip of 25mm width with thickness 60 to 80 micron in a grid fashion of 1m x 1m and copper strip shall be 1 mtr away from the edges. Copper strip grid will be connected to all the earthing pit by means of copper strip or and copper wire to nearest earthing pit.

(v) Apply a coat of conductive primer (ShaliFloor SL AS PU Primer) @ 250 gm/sqm (vi) Apply top coat of Antistatic Polyurethane Flooring @ 3.5 kg/sqm (ShaliFloor® SL AS 3PU of STP or Equivalent of fosroc / Asian/ CIPY ) of 2mm thick after cleaning and filling. Colour shade will be approved by GE in-consulation with users. (vii) Termination of Floor Treatment: All treatment of underlayment and leveling top coat polyurethane shall be terminated in a groove of 10 mm x 10 mm (depth) near doors, isolation joints and wherever necessary. (c) Treatment of Skirting/Coving at junction of Vertical & Horizontal joints : (i) Apply a coat of two component moisture insensitive epoxy primer (Shaliprime 2 E STP or Equivalent) having properties with a coverage of 150 ml/sqm and allow it to dry. (ii) A coving shall be formed with coving grade epoxy screed(ShaliFloor 3 ES of STP or Equivalent) and Primer Coat (Shaliprime 2 E STP or Equivalent) at the junction of floor and walls all around ,wherever exists. Skirting height shall be 65 mm x 65 mm. (iii) Apply two coats of two component aliphatic high build polyurethane coating having good chemical and weather resistance in two coats with a coverage of 150 ml/sqm per coat. Second coat shall be applied only after curing of previous coat at a gap of minimum 6 to 8 hrs. finally a thickness of 150 micron to achieve. Note :- (i) Entire treatement to be carried out by official applicator of approved product. (ii) Work to be executed in occupied hanger and the work in restricted area.

Supply and install split units, copper condensder, Inverter Type indoor / outdoor complete with cordless remoe control unit of capacity 2.0 TR 3 star with mounting bracket all as specified. Make :- Blue Star/ Hitachi / Carrier / Voltas

Supply and install split units, copper condenser, Inverter Type indoor / outdoor complete with cordless remoe control unit of capacity 1.5 TR 3 star with mounting bracket all as specified. Make :- Blue Star / Hitachi / Carrier / Voltas

Supply & Install automatic voltage stabilizer wall mounted single phase 50 cycles AC supply complete with volt meter and designed for input voltage of 160 volts to 260 volts and out put voltage stablized between 230 volts + 10% of capacity 5 KVA with high low voltage and time delay relay complete all as specified and as directed. Make V Guard, Blue Bird, Microtek

Supply & Install automatic voltage stabilizer wall mounted single phase 50 cycles AC supply complete with volt meter and designed for input voltage of 160 volts to 260 volts and out put voltage stablized between 230 volts + 10% of capacity 4 KVA with high low voltage and time delay relay complete all as specified and as directed. Make V Guard, Blue Bird, Microtek

Material & labour for Chemical earthing complete with copper plate electrode 900mm x 600mm x5mm burried directly in ground vetically to a depth not less than 4.70 mtr below normal ground level (with top edge of earth plate not less than 3.60 mtrs below ground level ) connected to copper strip 32 mm x 6 mm as main earthing lead by means of brass brazing at all joints all as directed and connected to earth test point all as specified and testing on completion with and including necessary excavation and earth work in any type of soil ,GI pipe medium grade 50 mm bore for protection of copper strip from earth electrode to earth test point, adequate quality of charcoal dust, common salt and magnesium sulphate in alternate layers of 100 mm thick x 6 layers all around the plate and RCC (1:2:4 type B1 using 20 mm graded crushed stone aggregate ) cover of size 54x54x50 mm reinforced with 8 mm dia TMT bars @ 75mm C/C both ways with mild steel flushed type handle 12 mm dia, PGI funnel with wire mesh, 20 mm dia GI pipe light grade for watering all as shown in drawing. Note :- a). Cost of copper strip and GI protection pipe up to a distance 7.5 M shall be included in quated rate of above Items. b) On testing,after completion of job ,if desired earth resistence (less than 1 Ohm ) is not found ,the earthing shall be redone at no extra cost to govt. Make : True Power Earthings, Sabo Systems Pvt Ltd, Jaipuria Brothers, Inter Tech India

M&L for earthing complete with galvanized steel earth plate of size 60cm x 60cm x 6mm thick burried directly in ground vertically at a depth not less than 2.25 metre deep below normal ground level with top edge of the plate not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and electrode connections by using galvanized iron lead wire GI strip 32x6mm by means of bolts, nuts, check nuts and washers made of galvanized iron or steel and protected by light grade 40mm dia GI pipe connected to main switch board or main contral board, and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1: 2: 4 type C2 including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No 3 of SSR Part I, all as specified and directed by Engr-in-Charge. Note : (i) Earth resistance shall be less than 5 ohm. (ii) RCC pit cover shall be pr cast of RCC(1:2:4) type B1,80mm thick reinforced with XPM not less than 4Kg/sqm. (iii) PCC chamber shall be constructed at least 500mm away from the edge pit. (iv) Rate shall be including GI strip and GI protection of pipe of length 7.5m, excess beyound 7.5m length reqd at site shall be measured and paid separetly.

S&F GI pipe, light grade 40 mm dia bore for copper strip complete all as required and as directed. Make :- TATA, Swastik, Jindal, Prakash, BST, Zenith

S & Fix Test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25 mm, drilled and screwed including 3 nos., 8 mm dia 25 mm long hex head screw.

S&F Copper strip 32 x 6mm buried in ground as main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthling etc. as required 32 x 6 mm copper countinity earth conductor. complete all as specified and as directed.

Taking down carefully by unscrewing old any type, ceiling/ surface tube light fittings etc complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L for Point Wiring for one light point controlled by one way switch complete with 1.5 Sqmm FR-LSH, PVC insulated unsheathed copper conductor single core multi stranded cable 650/1100 volts grade drawn in and including concealed non-metallic rigid PVC conduit medium grade with all fittings (ISI Marked) not less than 20 mm external dia but shall be increased as per actual site reqmt in accordance with clause no 19.125 of SSR part I fixed concealed / recessed in wall / ceiling etc including1.5 Sqmm FR-LSH, PVC insulated unsheathed copper conductor single core multi stranded cable 650/1100 volts gradeas earth continuity wire including MS sunken pressed steel terminal boxes of suitable size, made of sheet 1.6mm thick with 3.0 mm thick bakelite sheet top cover including nenessary cutting chases for concealing pipes and making good the surfaces complete all as specified. Make :- RR Kable, Finolex, Havells,

M&L for Point Wiring complete with 2.5 Sqmm FR-LSH, PVC insulated unsheathed copper conductor single core multi stranded cable 650/1100 volts grade drawn in and including concealed non-metallic rigid PVC conduit medium grade with all fittings (ISI Marked) not less than 20 mm external dia but shall be increased as per actual site reqmt in accordance with clause no 19.125 of SSR part I fixed concealed / recessed in wall / ceiling etc including 2.5 Sqmm FR-LSH, PVC insulated unsheathed copper conductor single core multi stranded cable 650/1100 volts gradeas earth continuity wire including MS sunken pressed steel terminal boxes of suitable size , made of sheet 1.6mm thick with 3.0 mm thick bakelite sheet top cover one 3 pin 15 or 16 Amp socket outlet on independent board including nenessary cutting chases for concealing pipes and making good the surfaces complete all as specified. Make :- RR Kable, Finolex, Havells,

M&L for Point Wiring complete with 4.0 Sqmm FR-LSH, PVC insulated unsheathed copper conductor single core multi stranded cable 650/1100 volts grade drawn in and including concealed non-metallic rigid PVC conduit medium grade with all fittings (ISI Marked) not less than 25 mm external dia but shall be increased as per actual site reqmt in accordance with clause no 19.125 of SSR part I fixed concealed / recessed in wall / ceiling etc including 4.0 Sqmm FR-LSH, PVC insulated unsheathed copper conductor single core multi stranded cable 650/1100 volts grade as earth continuity wire including MS sunken pressed steel terminal boxes of suitable size , made of sheet 1.6mm thick with 3.0 mm thick bakelite sheet top cover one 3 pin 15 or 16 Amp socket outlet on independent board including nenessary cutting chases for concealing pipes and making good the surfaces complete all as specified. Make :- RR Kable, Finolex, Havells,

S&F LED Flood light fitting 70W, IP 65 made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, IP65 protection,roadway luminaire with high power LED as light source , complete with all accessories internally pre-wired complete all as specified and directed. Make :- Philips, Wipro, Osram

S & F Recess mounted type LED light fitting 1' x 4' Full Glow complete with LED lamp 36 Watt, general purpose fully diffused recessed mounted LED luminaire with high transmitive diffuser suitable for indoor spaces complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable at a height of 8 Mtr false ceiling complete. Make :- Philips Cat Part No RC380B LED36S 6500 G5 L3W12 PSU OD or equivalent make of Wipro, Osram

S & F Surface mounted type LED light fitting 1' x 4' complete with LED lamp 34 Watt, general purpose fully diffused surface mounted LED luminaire with high transmitive diffuser suitable for indoor spaces complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable at a height of 8 Mtr surface complete. Make :- Philips Cat Part No SP680P LED34S 6500 PSU WH L120 S1 or equivalent make of Wipro, Osram

S&F Suspended/ Surface Type Highbay Luminaire 80 Watt, Environmental friendly, energy saving long life corrosion resistant vertical surface mounting pressure die-cast aluminium housing and control gear with high power LED as light source with hanging / fixed including all mounting accessories for fixing with truss of hanger/ MT Garages etc. and complete with prewired with flexible three core 1.50 sqmm size stranded copper conductor cable from light fitting to ceiling rose complete all as specified and directed. Make :- Havells Cat Part No SAUCER GEN XPRO HBP 80W LED 757 P90DBOLTG or equivalent of Philips, Wipro

S&F Heavy duty (Fully Metal Construction) Air circulator fan 600 mm sweep, 24 Inch, 1440 RPM, 4 speed controls, single phase, 230 volts, AC, 50 Hz, consisting of powerful circulator Motor with spiral guard design ensures High Air Thrust, High Torgue Gear Box with safety clutch, broad blade profile for low noise, resettable thermal overload protector oscillating mechanism and making electric connection using three core flexible twisted copper conductor of size 23/0.0076, free standing type complete all as specified and directed. Make :- Orient Cat Part No 600 mm Thunderstorm Stand Parot Green or equivalent make of Almonard, Khaitan, Usha

M&L for sub main wiring complete with 2 single core multi stranded copper conductor 2.5 sqmm (Nominal area) FR-LSH, PVC insulated unsheathed cable drawn in and including medium grade PVC conduit ISI Marked not less than 20 mm dia concealed including making good distrubed surface, of wall, including single core multi stranded copper conductor 2.5 sqmm size as earth wire drawn in same conduit complete all as specified and directed. Make :- RR Kable, Finolex, Havells, Plaza

S&F for flush mounting factory made TPN DBs Double door, IP-43 protection - IK 09 with metal door with neutral busbar, earth bar cables ties for cable management fully insulated busbar 4 Way etc complete all as specified and directed. Make :- Legrand, Schneider, ABB

S&F for flush mounting factory made SPN DBs Double door, IP-43 protection with metal door with neutral busbar, earth bar cables ties for cable management fully insulated 100 Amp busbar 4 Way etc complete all as specified and directed. Make :- Legrand, Schneider, ABB

S&F for flush mounting factory made Ekinoxe SPN DBs Single door, IP-43 protection - IK 09 metal door with neutral busbar, earth bar cables ties for cable management fully insulated 100 Amp busbar 2 Way etc complete all as specified and directed. Make :- Legrand, Schneider, ABB

S&F MCB Triple pole and neutral, 415 Volts, 32 Amps, breaking capacity, 10 KA, 'C' series etc complete all specified and directed. Make :- Legrand, Schneider, ABB

S&F MCB Single pole and neutral, 240 Volts, 40 Amps, breaking capacity, 10 KA, 'C' series etc complete all specified and directed. Make :- Legrand, Schneider, ABB

S&F MCB single pole, 240 Volts, 6 to 32 Amps, breaking capacity, 10 KA, 'C' series etc complete all specified and directed. Make :- Legrand, Schneider, ABB

S&F switch piano flush type, 5/6 amps, singe pole, one way etc, complete all as specified and as directed. Make :- Anchor, Cona, Kinjal

S&F socket outlet 2 in 1, 6 pin, 6 and 16 amps flush type all as specified and directed. Make :- Anchor, Cona, Kinjal

S&F switch piano flush type, 15/16 amps, singe pole, one way all as specified and directed. Make :- Anchor, Cona, Kinjal

Supply and fix ceiling rose, surface bakelite, 65 x 50mm, three terminals all as specified and directed. Make :- Anchor, Cona, Kinjal

M&L for earthing complete with galvanized steel earth plate of size 60cm x 60cm x 6mm thick burried directly in ground vertically at a depth not less than 2.25 metre deep below normal ground level with top edge of the plate not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and electrode connections by using galvanized iron lead wire GI wire 4mm dia by means of bolts, nuts, check nuts and washers made of galvanized iron or steel and protected by light grade 40mm dia GI pipe connected to main switch board or main contral board, and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1: 2: 4 type C2 including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No 3 of SSR Part I, all as specified and directed by Engr-in-Charge. Note : (i) Earth resistance shall be less than 5 ohm. (ii) RCC pit cover shall be pr cast of RCC(1:2:4) type B1,80mm thick reinforced with XPM not less than 4Kg/sqm. (iii) PCC chamber shall be constructed at least 500mm away from the edge pit. (iv) Rate shall be including GI strip and GI protection of pipe of length 7.5m, excess beyound 7.5m length reqd at site shall be measured and paid separetly.

S&F Exhaust fan, metal body AC single Phase. 230V of size 300m sweep with, blades, frame and louvers including cutting chases for fixing fan, connecting electrically using 3 Core 0.5 Sqmm PVC insulated FRLS flexible copper conductor cable overall sheathed all as required at site with connected accessories etc complete all as specified and as directed. Make :- Orient, Usha, Havells

S&F Socket outlet 5 pin, 5/6 amps, flush type all as specified and directed. Make :- Anchor, Cona, Kinjal

M&L for Dry sand cushioning for protection of under ground cables (8cm before laying the cable and 15cm after laying the cable in trenches) complete all as specified and directed.

M&L for Well burnt Sub class 'B', modular bricks laid dry, flat, over the cable abutting each other, length of brick equal to width of brick, complete all as specified and directed.

Supply, erecting and fixing in true vertical position, steel tubular swaged pole type 410 SP- 22 (8.5 meter long) complete with CI base plate, pole cap / finial taper plug,bolts, nuts and washers,welded reduced section and longitudinal weld throughout entire lenght of pole complete with including 2 coats of black bituminous paint externally up to planting depth and remaining portion of pole shall be provided with one coat of red oxide primer and two coats of aluminium paint complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables 1100 Volts grade with stranded aluminium conductor of size 6 Sq mm 2 core complete all as specified and as directed. Make :- Gloster, Havells, Polycab

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables 1100 Volts grade with stranded aluminium conductor of size 10 Sq mm 2 core complete all as specified and as directed. Make :- Gloster, Havells, Polycab

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables 1100 Volts grade with stranded aluminium conductor of size 16 Sq mm 2 core complete all as specified and as directed. Make :- Gloster, Havells, Polycab

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables 1100 Volts grade with stranded aluminium conductor of size 10 Sq mm 4 core complete all as specified and as directed. Make :- Gloster, Havells, Polycab

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables 1100 Volts grade with stranded aluminium conductor of size 16 Sq mm 4 core complete all as specified and as directed. Make :- Gloster, Havells, Polycab

S&F LED Street light fitting 35 W, IP 65 made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, IP65 protection, roadway luminaire with high power LED as light source 1 x 35 Watt, LED 6000K, complete with all accessories internally pre-wired complete all as specified and as directed. Make :- Philips, Wipro, Havells

S&F Street Light bracket made of light grade GI pipe 32 mm bore and 1.20mtr long duly bent to shape including 2 Pairs of MS Clamps made out of 40mm x 5mm M.S. flat, nuts, bolts, washers etc complete all as specified and as directed. Make :- Tata / swastik/ Jindal/ prakash.

S&F Weather Proof thermo plastic (Polysterene) Cable Junction box, having protection class IP-66 and of overall size 130 x 180 x 77 mm having metric knockouts on the wall, duly fixed with the pole with aluminium strip (25x3mm) clamp, GI bolts, nuts, washers and 2 Nos polymide weather proof cable glands of cable sealing range 10mm to 17mm (Complete with check nut) and including 1 No 30 Amps 4 Way cable connector and 1 No. 6 Amps SP MCB complete all as specified and as directed. Make :- Hensel, Spelsberg, Rittal

S&F Copper wire PVC insulated 3 Core multistranded of size 1.5 Sq. mm with FRLS PVC insulated copper conductor, cable in surface/ recessed as required from Junction Box to Street light fittings complete all as specified and as directed. Make :- Finolex, Havells, Plaza

S&F for single pole and neutral enclosure with two pin and earth plug and socket complete with a single pole MCB 20 Amps complete in sheet metal enclosure complete all as specified and directed.

M & L for Earthing complete with copper plate 60X60X3.15 mm thick electrode buried directly in ground (earth pit not less than 2.25 metres deep below grounf level) with top edge of the plate not less than 1.5 mteres below normal ground level, connected to and 20X3 mm copper strip as earthing lead by means of bolts, nuts, and washers of copper including 15 mm dia GI pipe light grade upto 1.5 m below GL for protection pipe, excavation and earth work charcoal dust, common salt, PCC 1:3:6 type C-1 chamber with cover cover and RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia PGI funnel and wire mesh all as shown in electrical plate No. 03 connected to earthing test point complete all as specified or indicated including testing on completion complete all as specified and directed.

M&L for making 2 Nos hole (20mm) in steel tubular pole by using gas welding/ electric arc welding for insertion of wire for street lights (from pole mounted street light junction box to street lights). The holes should be carried out at 1500 mm above ground level and 1200 mm below top level of the pole including grinding the surface of pole for proper smoothness complete all as specified and as directed.

Shikhar ji Enterprises