Dubchaura Retro ws scheme (Revised)

Amount

Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). including supply of all material,labour,T&P etc.required for proper completion of work.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Excavation of pipeline trench in Soil mixed with Boulder, lift upto 1.5m, lead upto 30m. Including refilling, watering, ramming of excavated earth into the trenches and removal of surplus earth upto a distance of 60m from trenches including supply of labour, T&P etc complete.

Boulder and bazari

Supply and Carting , laying jointing (including cost of jointing materials like specials and fittings, white lead, hemp and oil etc.) fixing and testing of M.S. galvanised screwed and socketed pipes (Medium quality).including cutting and threading etc. complete confirming to IS:1239 (Part-I) make of pipe:Jindal (Hisar)/Parkash Surya/ TT Swasthik

GI Pipe 15 mm dia (Medium Qualty)

GI Pipe 20 mm dia (Medium Qualty)

GI Pipe 25 mm dia (Medium Qualty)

GI Pipe 32 mm dia (Medium Qualty)

Supply and Carting, of following sizes of MSERW YST210 grade plain ended pipes from store to site of work, lowering them into trenches, laying true to alignment & gradient, laying & Jointing of Pipe by electric welding, making horizontal & vertical bends of any degree as per site conditions including cutting of pipes for making up lengths as required for completion of works & also including cost of welding materials (Advani make welding rods), all other materials,labours & T&P etc. required for proper completion of work.

50 mm (3.9 mm thick)

Providing and fixing gun metaled Gate valves as per IS: 778/1997

25mm dia

32mm dia

Supply And fixing of C.I Sluice Valve Pressure PN 16 50 mm dia

Supply And fixing of C.I.D/ F Reflux Valve Pressure PN16 50 mm dia

Supply of all materials, labours, T&P. etc. to construct wheel valve chamber of internal size 0.60x0.60x0.60 mtr of stone masonary, 15mm thick cement plaster with cm 1:4 and with M.S. Cover with locking arrangement as per type design complete.

Supply of all materials, labour T&Petc Construction pump house room of 3.5mX 3.0m internal size including construction of platform for pumps & motors ,supporting pillers as per drawing & design.

Supply of following water meter & fix them on pipe line.

CAPSTAN inferential dry dial bulk -enclosed type spiral water meter, flanged end class-A at service Reservoirs-50mm size

Supply of all materials, labour T&Petc Construction of R.C.C CWR of following capacities (In kiloliters) with M.S Ladder out side the tank and alluminium ladder inside of the tank M.S M.H cover with locking arrangement , lighting conductor as per electricity rules, water lavel indicator, supply & fixing of out let, in let , over flow and wash out pipes with necessary sluice vales, pipe pieces (Including cost of materials) flooring 0.60 m wide apron , painting on tank body verticl pipes, ladder, M.S M.H cover, ventilator column etc. complete with approved water proosing ( apex/Enamal paint, testing filling water for testing purpose etc. including supply of vertical pipes and special assuming bearing capacity as 10 MT/M2

supply and installation of bucket type chlorinator of 25 liters capacity.including supply of all material, labour, T&P etc.required for proper completion of the work.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand) including supply of all material,labour,T&P etc.required for proper completion of work.

R.R. Stone masonry laid by foundation & plinth and including supply of material labour T&P etc. for proper completion of work.

Supply and fixing of Iron Gate with two pillars complete. 2.4 m wide gate

Construction of boundary wall including supply of all material labour,T&P etc required for proper comletion of the work.

E & M Works

Transportation of suitable truck mounted ODEX/DTH drilling Rig Machine along with all necessary accessories i.e. Compressor, O.P. Unit and other relevant T & P upto site of work and back after completion of work complete.

Drilling of bores as per IS 2800-1979 using ODEX 115 (Tubex) attachment required drilling in alluvial, boulder, pebbles, gravel, rocky stone, sticky clay etc. including cost of attachment consumable stores, bits, water POL etc. complete with system of simultaneous lowering of 175 mm nominal bore 5.4 mm thick MSERW fin cut casing pipe which will be welded together etc. Complete in all respect as per direction of Engineer-In-charge.

175 mm dia DTH Bore

Flashing of Tube Well by air compressor.

Development of bore by O.P. Unit through diesel engine driven D.G. set including the cost of installation, lowering of O.P. unit, Coloumn Pipe and dismantling of O.P. Unit, M.S. Pipe after completion of works.

Lifting of 150 mm dia MSERW Casing pipe from the ODEX drilled bore with the help of suitable tools of ODEX/DTH drill machine after measuring discharge by O.P. Unit.

Site clearance after completion of work & welding of cap.

Site devlopment (approchable way, rock cutting & plaining of site as per machine requirement).

150 mm dia MSERW Fincut pipe

Casing shoe

Bit tube for ODEX- 115

150 mm dia M.S. Well Cap.

Construction of Tube well by ODEX Rig Machine in the strata of large Boulder and hard stone area from G.L to 160.00MBGL to lower the assembly of 200mm dia to get sand free minimum yield , complete as per following work at site.

(i)Transportation of Odex Rig Machine, with Compressor, O.P. Unit and other relevant T & P upto site of work and back after completion of work.

(ii)Drilling of bore 200mm dia with sinking of 200mm dia pipe by ODEX system from G.L. to 160Mt. B.G.L.

(iii)125mm dia DTH bore

Supply of Tubewell assembly.

(i)Supply of 200 mm dia M.S.E.R.W. plain fincut pipe 7.1 mm thick.

(ii)Supply of 200 mm dia M.S.E.R.W. slotted/perforated fincut pipe 7.1 mm thick.

(iii)200mm dia casing shoe of EN-24 steel.

(iv)200mm dia Tubewell Cap.

(v)Supply of 200x100mm dia size M.S Girder 4Mt. Long.

Dismantling of Rig machine after completion of work. Fitting of girder, clamp and well cap.

Flushing of Tubewell by Air compressor.

Development by O.P. unit

(i) Erection and lowering of O.P Unit.

(ii) Development by O.P unit to get Send free discharge.

(iii) Dismantling of O.P unit and site clearance.

Chemical & Bacteriological Test

Submersible pump set of 60 LPM, 250Mt. head suitable for 200mm dia Assembly operating at 3 phase 50Hz AC supply.

Spare Pump Set of same duty.

Star Delta Starter Cum panel of 10HP suitable for submersible pumping plant complete with over load relay, S.P.P, Power capacitor, volt meter , Amp. meter indicating lamp and suitable capacity of MCCB.

Submersible cable size 1x3x10sq.mm.

Main piping and valve with all accessories of 65mm size i.e. sluice valve 2 Nos., reflex valve 1No., Tee 1No., Bend D/F pipes and 50mm dia M.S. column pipe with top pipe in 3mt. Length, complete with interlocking arrangement 120Mt.

Pressure gauge with fitting. 0-35 kg/cm2

Chain pulley block of 2.0 Tonne capacity 4 Mt. lift spur gear.

Double Loop Earthing material for pumping plant with including earth GI earth plate 2x2 sq fit and GI pipe, GI earth strip, proper coal & salt mixer filling etc complete work as per I.E. rules.

S/F 63 Amp. MCCB 3 phase 4 pole 415V 50 c/s AC on wall mounting complete

Supply and fixing of Electronic type dosing system complete with solenoid coil actuated pulsar circuit, diaphragm & electronically pulp capable of delivery max, 4LPH at 5.5kg./cm2 pressure operated 220Volt single phase A.C. Supply along with chemical injection device and 100Ltrs capacity of media tank complete with accessories.

Liquid Chlorine required

Chlorine Testing Kit

Rubber Insulation sheet 1 Mt. x 2 Mt. x.025Mt.

Servo Control Voltage Stabilizer 25 KVA suitable for regulating incoming voltage 300 to 480Volt , outgoing voltage 415Volt with 100Amp. change over switch and 26sq.mm 3½Core copper cable, first filling of Transformer Oil and complete installation.

Supply of Special tools and spanners with 2 Nos. chain wrench.

Intelligent GSM based Mini Remote Terminal Units/PLC with analog and digital parameters and features as specified mini T.W. and transmit data on GSM backbone. GSM based wireless Communication system capable to transfer and gather data from remote sites to master Control Stations (Voltage, Current, Power factor, Pumping running Hour etc.) with 6 Amp. Automatic Voltage stabilizer including high and low cut and isolation transformer.

Erection, testing and commissioining and modification of starter with AC and DC relays and necessary wiring complete in all respect.

Installation, Commissioning & Testing of pumping plant and all accessories.

Internal & external Electrification of Pump house

1 Month trial running and 5 months maintenance including watch & ward.