Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹62.1 LAccepted-AOC GE WEST BAREILLY | L1 | Accepted-AOC Accepted | |
| 2 | L2₹66.6 L+₹2.1 L (3.31%)Rejected-Finance 578 AVAS VIKAS JANAKPURI B IZATNAGAR BAREILLY 243122 UP | BAREILLY | UTTAR PRADESH | 243122 | L2 | Rejected-Finance Rejected | |
| 3 | L3₹69.5 L+₹5.0 L (7.72%)Rejected-Finance R O 89 PRABHAT NAGAR NEAR RAM JANKI MANDIR BAREILLY 243122 UP | BAREILLY | UTTAR PRADESH | 243122 | L3 | Rejected-Finance Rejected | |
| 4 | L4₹73.8 L+₹9.3 L (14.4%)Rejected-Finance | L4 | Rejected-Finance Rejected | |
| 5 | L5₹77.7 L+₹13.2 L (20.5%)Rejected-Finance 110B CIVIL LINES BAREILLY 243001 UP | BAREILLY | UTTAR PRADESH | 243001 | L5 | Rejected-Finance Rejected |
Tender Value
₹94.6 L
EMD Value
₹1.7 L
Closing Date
30 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Office BAREILLY
HQ, CWE, MES, Station Road, Bareilly
CA NO.CWE BLY/GE (W) / 28 OF 2023- 2024 SPECIAL REPAIRS TO BLDG NO T-31 CROSS ROAD AND OPEN/COVERED DRAIN ALOGWITH CONNECTED DRAIN AT CERTAIN LOCATION AT BAREILLY CANTT UNDER GE WEST BAREILLY
2023_MES_610921_2
8100/B/768/E8
Open Tender
Civil Works
Item Rate
270 days
GE WEST BAREILLY
As per NIT
6 documents required · 6 mandatory
₹1,000
GE West Bareilly
₹1.7 L
Yes
5 Dec 2023
30 Aug 2023
2 Oct 2023
30 Aug 2023
30 Sept 2023
14 Sept 2023
Amount
Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.
M&L rendering 15 mm thick in CM 1:6 on brick masonary wall surfaces on fair faces of brick masonry finished even and smooth without using extra cement complete all as specified and directed.
M&L 15mm thick rendering in cement mortar 1:4 to on brick masonary wall surfaces on other than fair faces of brick masonary fair finished without using extra cement with using water proofing liquid complete all as specified and directed.
M&L 5 mm thick cement plaster on fair faces of concrete in ceiling using CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises as specified and directed.
M&L Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile laying over and including screedind 15 mm thick cement mortar 1:6 for floor finishes complete all as specified and directed.
M & L for Glazed ceramic tiles in vertical surface 450X 300X 7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tile over 10 mm thick rendering in CM 1:6 complete all as specified and directed
M&L for double charged vitrified tiles light shade 09-10mm thick (square/ rectangular), area of each tiles exceeding 0.42 sqm but n exc 1 mtr as in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement over and including screeding 15mm thick in CM 1:6, complete all as specified and directed
All as Item No 8 above but tiles for skriting/dado over and including rendering 10mm thick in CM 1:4, complete all as specified and directed
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc in any mortar etc complete all as specified and directed.
Demolition of Cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all specified and directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.
M&L for brick work with fly ash burnt clay bricks old size as per IS 13757-1993 (Revised 2007) straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified and directed.
Demolition of concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.
Demolition of Reinforcement cement concrete of any description and in any position not otherwise specifically provided for, as specified and directed.
M&L for cement concrete type D2,1:4:8 (using 40 mm graded stone aggregate) as in mass concrete complete all as specified and directed
Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) removing from site complete all as specified and directed.
S&F powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality) for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and with and including 5.50 mm thick glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section (Make:Hindalco/Indalco/Jindal) as appended below- (i) Window frame :68.4x38mm X 1.15 mm thick for three tracks. (ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over ' (iii) Aluminium beading - 0.7mm thick ' (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such aluminium suitable handle with auto interlock cap with suitable size . (vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.
S&F powder coated aluminium frame for windows, ventilators and kitchen cupboards, doors frame (Make:Hindalco/Indalco/Jindal) of size 150x44mm and 2mm thick with one or more rebates including joining cleat for fixing etc and add for powder coating (minimum thickness of powder coating 50 micron) complete all as specified and directed. Note : Weight of section should not less than 1.12 kg per RM complete all as specified and directed.
S&F for mild steel window grills box type framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding, FE-290 grade E-165 complete all as specfied and directed.
Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) removing from site complete all as specified and directed.
S&F Pressed steel frames size 105 x 60 mm (thickness of PBI sheet 1.25mm thick) and conforming to IS 4351-2003 for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. (Note-Rate for filling PCC 1:2:4, type B0(using 12.50 graded stone aggregate) in frame deemed shall be included in quoted unit rates)
S&F Pressed steel frames size 125 x 60 mm (thickness of PBI sheet 1.25mm thick) and conforming to IS 4351-2003 for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. (Note-Rate for filling PCC 1:2:4, type B0(using 12.50 graded stone aggregate) in frame deemed shall be included in quoted unit rates)
S&F for 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F 35mm thick Glazed and skeleton shutters, open rebated of saal wood second class hard wood rail and stles and prepared to receive glass, gauze, etc. (without sash bars), divided into squared, with plain, cham-fered or rounded, mitred and rebated sash bars, any numbers sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkats complete all as specified and directed.(Note :- Glass/gauge shall be measured and paid for separately)
M&L Factory made single extruded WPC( Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/chowkhat of size 105X60 mm comprising of vergin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity indix of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N /Sqmm, modules of elasticity 900 N/Sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardantand fixed in position with mild steel hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. (Note- (i) WPC solid door/windows frame, minus 5 mm tolerance in dimension i.e. depth and width of profile shall be acceptable. varriation in profile dimension plus and minus side shall be acceptable but no extra payment on this account shall be mage. (ii) Hold fast shall be measured and paid separately)
M&L Factory made single extruded WPC( Wood Polymer Composite) solid plain flush door shutter of 30 mm thick comprising of vergin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity indix of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N /Sqmm, modules of elasticity 850 N/Sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with nessary full body threaded headed counter sunk SS screws complete all as specified and directed. (Note- Hinges shall be measured and oaid separately )
S&F steel windows with pressed steel frame (size 95 x 45 x 1.25 mm ) side hung shutter including box type hinges with steel handle and steel peg stay with glazed openable shutter with glazing bar ( open out side ) and wire gauged openable shutter without glazing bar ( open inside ) dovetailed or welded complete all as specified and all as per DRG No TD/088 dt 07 Jan 2002 Note :- (i) Two shutters ie wire guaged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit (ii) rate for filling PCC 1:2:4, type B0(using 12.50 graded stone aggregate) in frame deemed shall be included in quoted unit rates (iii) MS grill shall be measured and paid seperatly under relevant item of schedule.
S&F stainless steel wire cloth, 0.56 mm nominal dia of wire and average of aperture 1.18 mm and fixed with stainless steel wire staples and over stainless steel chicken wiremesh(pitch length 0.25mm) complete all as specified and directed .
S&F for steel ventilators with top fixed type, with glazing bars complete welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed. (Note :- Glass shall be measured and paid for separately).
Taking up or down15 mm steel tubing and connections including cleaning for refixing or removal from site complete all as specified and directed.
Taking up or down20 mm steel tubing and connections including cleaning for refixing or removal from site complete all as specified and directed.
S&F 15 mm dia steel water tubing galvanized medium grade concealed in all type wall with and including all fittings, fixed to walls and ceiling or in floor complete all as specified and directed .
S&F 20 mm dia steel water tubing, galvanized, medium grade concealed in all type wall with and including all fittings, fixed to walls and ceiling or in floor complete all as specified and directed.
S&F in repairs factory made PVC Cupboard frame of the size 75mm x 40mm with a wall thickness of 5mm, made out of extruded 5mm thick plain/prelam PVC sheet of density 600 kg/cbm, having bottom width of 50mm and thickness of 10mm. All four frame lengths reinforced with 15 mm x 15mm M. S. square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners adjointed with 2 nos. of 15mm long brackets 0f 10mm x10mm M S square tubes. The door frame shall be fixed to the wall using 8/100 long M S screws through the frame by using PVC fasteners. A minimum of 4 nos. of screws to be provided for each vertical member and minimum of 2 Nos. of screws to be provided horizontal member etc. complete as per manufacturer's specification and drawingas & directed..
S&F factory made PVC cupboard flush type shutter of 30mm thick consisting of frame made out M S tubes of 19 gauge thickness and size 19mm x 19mm for stiles and rails. The inside panel shall consist of 20 mm thick multichamber hollow PVC section of 1mm wall thickness, bonded using solvent cement/ cynoacrylate adhesive with 5mm thick plain/prelam PVC sheet, on both side of inside panel incliding necessary items to fix the shuter to frame such as 100mm stailess steel hinges, 100 mm long handles made of anodised aluminium and magnetic ball catch for each pair of shutter.All four edges of the panel to be sealed with lipping of 10mm thick and 20mm wide PVC sheet baton (made by sticking 2nos. PVC foam sheet of 5mm thickness using PVC solvent cement adhesive) complete as specified and directed.
S&F PVC boards 19/20 mm thick any colour/ prelaminated as in cabinets including shelves and shutters, fixed with screws and adhessive as per direction of Engr-in-Charge and, manufacturer's instructions with and including required piano hinges, magnet catcher, handles etc. complete all as specified and directed.
M & L for glass shelf in good quality (10 to 12 mm thick) with necessary brackets fixed in wall to hold the glass shelf complete all as specified and directed.
S&F 200 mm long Stainless Steel (Grade 304) glossy finish handles with SS screw, complete all as specified and as directed
S & F hydraulic concealed hinge with clip on installation and integrated Silent System, opening angle not less than 100º, For shutter thickness 15 - 24 mm full overlay type shutters, hinge cup dia 35 mm including necessary fixing arrangement with SS screw complete all as specified & directed.
Dismantling water tanks 500 & n exc 1000 and removing from site of all retrieved materials complete all specified and directed.
S&F 1000 litres, rotational moulded polyethylene of white colour in tripple layer water storage tank (cylindrical vertical with closed top hoisted and fixed in position including necessary connections complete all as specified and directed
Dismantling timber scantlings under 40 Sqcm and over in section, in any position , framed work complete all as specified and directed.
Dismantling timber scantlings 40 Sqcm and over in section, in any position , framed work complete all as specified and directed.
M & L for Steel work in tubular hollow rectangular trusses, purlins, rail including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade inluding one coat of zinc chromate primer before fabrication distance pieces, cleats etc GDE Fe 410-S. complete all as specified and directed.
S & F Pre-painted galvalume aluminium zinc coating GI based semi corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed and shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) with self tapping screws including Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified and directed.
Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L in repairs 12 mm thick GRG false ceiling for all heights with GRG false ceiling of size 595mmx595mm of approved texture, texture design and pattern having moisture content less than 2% humidity resistance of 99%, NRC 0.85 as per IS 8225: 1987.to be laid in true horizontal level suspened on interlocking with metal T-grid of hot dipped galvanised iron section of 0.33mm thick comprising of main-T runners insulation and grid module ogf galvanised section of size 600mmX600mm suspended from the ceiling with necessary fittings with all hanging /sopporting arragements as in false ceilling incl taking down old ceiling with frame and making good disturbed surface complete all as specified and directed .
M&L for Granite (of any type) tiles 16 to 18mm thick machine cut and machine, polished,and moulding, window cills, riser of steps and urinal partition wash basin platforms and flooring,skirting/dados, kitchen like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of marble laid over cement screed and jointed with grey cement slurry mixed with pigment to match including rubbing & mirror polishing ding and inclucding 10mm thick cement plaster on brick surfaces or concrete surface in cm (1:4) finished even and rough as screed complete all as specified and directed.
M & L for 75mm thick PCC 1:3:6 , type C-2 (using 40 mm graded stone aggregate) as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed .
M&L for reinforced cement concrete 1:1.5:3 type A-1 (using 20mm graded stone aggregate) (nominal mix) as in slabs supported on wall,landing, balconies, shelves and like including bonding agent , complete all as specified and directed. (Note-reinforcement to be measured & paid under respective items).
M&L for reinforced cement concrete 1:1.5:3 type A-1 (using 20mm graded stone aggregate) (nominal mix) as in Lintel/Roof beam and chajja including bonding agent ,complete all as specified and directed. (Nore-reinforcement to be measured & paid under respective items).
S&F Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finish surface completed all as specified and directed.
S&F Form work to sides and soffits of floor or roof beam, beam hings, girders bressume, lintles, contilevers, shelves,Chajjas including support over lungs etc also splays between floor and beams etc. for rough finish surface completed all as specified and directed.
M&L form work to edges of concrete flats, treads, breaks in floors window cill, concrete railing opening in conc wall , floor and roof n.exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n.exc 20cm wide for rough finished surfaces of concrete, complete all as specified and directed.
S&F TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified and directed.
S&F Mild steel TMT bars 6 mm dia and over upto and including 10 mm dia in stirrups,spaces and binders and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0 complete all as specified and directed.
S & F 140 mm long floor door stopper of aluminium alloy body and tongue, brass body and tongue with hard drawn steel spring as specified and directed.
M&L for stainless steel (AISI 304 Grade ) Non magnetic multilayer nikle chrome plated for multipurpose utensil container including frame work telecscopic channels, handles etc as reqd and complete all as specified and as dircted utensil sample, design and pattern of each basket to be approved by GE the foloowing size in each kitchen. (a) plain basket 510x470x100mm or 520x485x100mm or 530x505x150mm size 520x485x90mm of 03 nos (b) multisize plate basket of size 510x470x150mm or 520x485x150mm or 436x500x200mm (Clear depth 500mm) 02 nos size 520x485x90mm (c) Cutlery Basket, with Perforated bottom and side of compacted -slots for holding cutlery of size 510x470x100mm or 520x485x100mm or 144x468x50 (Clear dpth of 500mm) 02 nos size 520x485x95mm (d) Plain basket of size 510x470x200mm or 520x485x200mm or 486x500x200mm 02 Nos size 520x485x180mm (e) pull out with 2 basket each of size 150x485x80mm or 100x485x80mm 01 Nos size 610x485x90mm (f) dust bin as reqd 01 Nos
S & F 150 mm thick Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed.
S&F 150mm size aluminium handles, cast type anodised complete all as specified and directed.
S&F 100 mm size butt hinges medium weight stailess steel complete all as specified and directed.
S&F 300 mm size ordinary mild steel , rat tailed rod pattern spring including roller and roller plate welded to mild steel frame.fixed as in repair complete all as specified and directed.
S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repairs Vitreous China table/counter top wash basin of suitable size including SS bottle trap, and cabinet of PVC shutter fixing on counter with SS waste coupling, cp mixer for hot & cold waste pipe complete all as specified and as directed.
S & F in repair fancy type 150mm size square brass CP shower rose with or without swivel joints complete all as specified and directed.
S&F in repairs brass chromium plated wall mixer 3 in 1, 15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and directed.
S&F in repair 15 mm dia bib tap fancy type chromium plated with flange quarter turn complete all as specified and directed.
S&F in repairs Bib tap 15 mm standard of PTMT any colour high pressure screwed for iron pipe and screwed (min weight 90 gms) complete all as specified and directed.
S&F in repairs angle valve 15 mm standard of PTMT any colour high pressure screwed for iron pipe and screwed (min weight 90 gms) complete all as specified and directed.
S&F fancy type chromium plated brass two way bib cock suitable for 15mm bore pipe complete all as specified and directed.
S&F stainless steel of AE- SI 316 grade tubular towel ring including a pair of CP brass bracket complete all as specified and directed.
S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.
S&F in repair fancy type brass chromium plated soap dish of 160x160x90 mm ,complete all as specified and directed.
S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed.
S & F in repair fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified and directed.
S&F in repair of 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F in repair 15 mm dia fancy type stop cock/concealed cock , chromium plated with long shank and cup (conncelaed type)for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repair vitreous china squatting pan of orrissa pattern long pan size 580 x 440 mm white with "P"or "S" trap size 110 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified and directed.
S&F in repairs Vitreous china wash down water closet single piece (Cascade pattern) with seamless flushing cistern square design duroplast slim seat cover, slow falling seat cover size 69x37x73CM / 66x35x71 complete, including connection to drain pipe etc complete all as specified and directed.
S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed
S & F Brass CP hand shower (health faucet) with 8mm Dia 1.0 Meter Long Flexible Tube and Wall Hook screwecd for iron pipe fancy type long body complete all as specified and directed.
S & F in repair water Jet of EWC chromium plated with PVC connection fixed at water closet single piece seat complete all as specified and directed
S&F in repair PVC (SWR) floor trap with CP grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1(using 20 mm graded stone aggregate) complete all as specified and directed.
Dismantling of cast iron /PVC/AC/SGSW pipes 100mm dia jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.
S&F PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed.
S&F PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fittingcomplete all as specified and directed.
S&F PVC (SWR) 110mm bore bends any radius complete all as specified and directed.
S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.
S&F in repairs Stainless Steel plate rack of size 90x80x25cm made with 1.00 mm thick sheet including taking out existing wooden plat rack, complete all as specified and directed.
S & F in repair 0.8 mm thick stainless steel kitchen sink size 590x460x230mm undermount, double bowl size 540x410x230 mm) , incl waste pipe & SS coupling, washers etc. complete all necessary fittings complete all as specified and directed.
S&F in repair 20 mm dia stainless steel 1.0 mm thick fancy type curtain droppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate c/s in each end & intermediate support complete all as specified and as directed
S & F Brass CP Hand Shower with 15mm dia 1.2 Meter long flexible tube and wall hook screwecd for iron pipe fancy type long body complete all as specified and directed.
S & F for Toilet paper holder, vitreous China, Chromium plated with flap guard fixed with screwed in wall complete all as specified and directed.
S & F for glass corner shelf in Bathroom 225 x 225 mm with chromium brackets and fixed with screwed in bathroom corners complete all as specified and directed.
M & L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, Chajja ( up to IInd floor) etc making good, cutting exc 10cm and not exc 40cm girth in brick walls complete all as specified and as directed.
M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed.
M&L for preparing newly plastered walls surfaces and applying two coats of exterior emulsion paint over 1 mm thick birla wall care putty complete all as specified and directed.
M&L for complete removal of existing treatment on walls etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of exterior emulsion paint over 1mm thick birla wall care putty complete all as specified and directed.
M&L for preparing newly plastered walls surfaces and applying two coats of Interior emlusion paint over 1mm thick birla wall care putty complete all as specified and directed.
M&L Preparation of newely plaster surfaces and applying three coat of white wash on ceilings complete all as specified and directed.
M&L for preparation of new untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed.
Supply and providing water proofing treatment with polyster based water proofing membrane having 10 years guarantee for water tightness all as specified and directed and described as under :- (a) Prepartion of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/Sqm including cleaning surface, all as per manufacture'"s specification complete all as specified and directed. (b) Supply & providing water proofing treatment with polymeric proofing membrane of 3 Kg/Sqm consting of 100 micron HMHDPE film centre core including coating the surface with the compatible primer and torch application of membrane with 10 cm overlaps as required thereof, complete all as specified or as directed.
M&L for Providing & injecting chemical for post construction ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in a portion with cement mortar 1:2 to match the existing apron complete all as specified and directed.
M & L for Post Construction anti termiteTreatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor soil complete as specified and directed.
S & F of Steel rolling shutters (thickness of lath 1.25 mm), with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete all as specified and directed. push pull or manual type
Taking down steel gates any type and size complete all as specified and directed.
M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as insub base etc complete all as specified and directed.
M & L for 50 mm sand(local) cushion over PCC before laying interlocking tiles complete all as specified and directed.
M&L for rubber moulded glazed interlocking paver block ISI marked any shape and size (IS 15658 -2006) of 60mm thickness, M-35 Grade, machine pressed of pattern completed as specified and directed.
M&L Providing and laying at or near ground level factory made kerb stone (of size 300mmx300mmx150mm) of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. and filling after embeded including watering and well ramming complete all as specified and directed..
Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 m in depth, getting out in soft/loose soil etc., in luding trimming bottom and sides of trenches, leveling/grading and ramming bottom of excavation complete all as specified and directed
Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil, complete all as specified and directed.
Removing surplus excaveted soil to a distance exc 250 Mtr and nexc 500 Mtr depositing where directed at a level n. exc 1.5 Mtr above the starting point complete all as specified and directed.
M&L for 150 mm bore reinforced concrete pipes class N P-2, laid and jointed complete with collars over concrete bed for 150mm in PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) to drain pipes including packing under,haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
M&L for PCC 1:2:4 type B-1(using 20 mm graded stone aggregate) as in channels/benching of manhole, laid to shape and slope and surfaces finished even and smooth using extra cement, complete including all form work etc complete all as specified and directed.
Supply only integral water proofing compound (powder) complete all as specified and directed.
M&L providing pre cast reinforced cemnent concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in precast RCC manhole / septic tanks covers including all form work and setting in CM 1:4 complete all as specified and directed. Note- size of cover shall be approved by Engineer-in-Charge).
M&L for brick work with fly ash bricks old size as per IS 12894 -2002 straight or curved on plan exc 6 m mean radius built in cement mortar 1:4, complete all as specified and directed.
M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregrate) as in mass concrete as in coping, kerb including necessary form work complete all as Specified as directed
Cutting into existing manholes for connecting new drains making good to open and rendering, cutting out existing benching for and forming branch channel 1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1(using 20 mm graded stone aggregrate) ,smooth finished and reforming benching complete all as specified and directed.
M & L for plain cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.
M&L 10 mm thick cement plaster on brick surfaces or concrete surfaces in cm (1:3) including taking down plaster finishing the surface even and smooth without using extra cement and necessary scaffolding complete all as specified and directed.
M&L for PCC 1:2:4 Type B0 using 12.5 mm graded aggregate as in levelling course, haunching, coping and similar works of over RCC roof surface including rounded or chamferred on edges etc necessary form work for concreting acomplete all as specified and directed.
M & L for PCC type B2 1:2:4 ( 40 mm graded stone aggregates) as in surface channel of drains including forming fair finished drain or channel of inner girth using extra cement incl forms moulds mitered /stopped ends etc.complete all as directed and specifed.
M & L for providing precast Reinforced Cement Concrete 1:2:4 type B-1 (nominal mix) in landings, cover slabs (for man holes etc.) and set in CM 1:6 and similar articles with plain faces including cham?fers, weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified and directed.
Dismatling of bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc. (each layer) complete all as specified and directed.
M & L for hard core of gauge not exceeding 63 mm of broken stone or boulders, spread and levelled in layers not exceeding 15 cm thick, rolled and consolidated to required Gradient with 8 to 12 Tonne Power Roller, complete all as specified and as directed.
Taking down carefully aluminium point wiring any type including battens if any except for ceiling or where not feasible for light/ fan//bell/socket or power and including unscrewing from board, fitting and fixture such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified and directed.
Taking down carefully UNSV main switch DBs of any description of an size in any position complete all as specified and directed.
Taking down submain wiring including all accessories complete all as specified and directed.
Material and labour for point wiring with single core FRLSH 1100 volt grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, with all conduit accessories, screws (concealed conduit wiring in walls and casing capping on ceiling or roof) including metal box suitable for modular fittings and covered with modular plate and cover of suitable size with new brass screws for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified and directed for:- (a) One light / fan/ exhaust fan point controlled by one switch complete all as specified and directed.
(b) One 5 pin 5 Amp switch socket out let point on an independent board complete all as specified and directed.
(c) One 5 pin 5 Amp socket out let point controlled by one switch on same board complete all as specified and directed.
(d) One buzzer/ bell point controlled by one push button on the same board with other switches or independent complete all as specified and directed.
All as per above item No. 136 here in before but for one 15 Amp 6 Pin switch socket out let independent with 2.5 Sqmm FRLSH (Nominal Area) PVC unsheathed copper conductor single core multistranded incl 2.5 sq mm FRLSH PVC copper conductor single core used as earth continuity conductoe complete all as specified and directed.
S & F Modular switch one way 10 A, 1 Module including plate complete all as specified and directed.
S & F Modular switch one way 16 A, 1 Module including plate complete all as specified and directed.
S & F Modular Socket 6 Amp, 2/3 Pin combined 2 Module including plate complete all as specified and directed.
S & F Modular Socket 6/16 Amp, 2/3 Pin combined 2 Module including plate complete all as specified and directed.
S & F Modular fan regulator Step up type, 120 Watt, 2 Module including plate complete all as specified and directed.
S&F Modular Bell push 6A 1 module including plate complete all as specified and directed.
S&F bell ding dong musical ,AC, 230 Volt, single pole complete all as specified and directed.
Supply and Fixing ceiling rose PVC / Poly carbonate, Isolated body, three terminal AC 230 volts complete all as specified and directed.
M & L for replacement of lamp holder, PVC / Poly carbonate, insulated body modular type with back plate batten/angle type for batten fittings complete all as specified and & directed
Supply and fixing surface mounting LED light fitting aluminium extruded T-5 batten , 10 Watt, 2 feet including connection with 23/0.0076 three core PVC flexible cable etc complete all as specified and directed.
Supply and fixing surface mounting LED light fitting aluminium extruded T-5 batten , 20 Watt, 4 feet including connection with 23/0.0076 three core PVC flexible cable etc complete all as specified and directed.
S&F indoor decorative LED City-3 light fitting suitable for 12 Watt retrofit LED Lamp B22 base with polycarbonate body with upper globe complete including single 12 Watt LED lamp complete all as specified and directed.
Supply and fixing surface mounting LED slim square down lighter made of PDC Al with high efficint LEDs and glare free opal diffuser, IP 20 12 watt 220 volts AC complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Supply and fix LED lamp 12 Watt, 230 V , AC integrated circuit complete all as specified and directed.
Supply & Fixing security light fitting, LED type, 20 Watt, 6000 K, pressure die cast housing with prismatic polycarbonate diffuser & indvl LEDs as light source with integrated electronic driver complete with M&L GI pipe mounting bracket of size 25/32 mm dia and 1.20 m long fixed to wall with and including nut, bolts and GI clamps of size 50 x 6 mm as required including two coats of synthetic enameled paint over a coat of primer and making connection with three core 23/.0076 rubber insulated copper cable from ceiling rose to connector of street light complete all as specified and directed.
M&L for sub main wiring with two single core 6.0 Sqmm (FRLSH) copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 6.0 Sqmm (FRLSH) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified. ( Note :- Two runs of 6.0 sqmm (FRLSH) and one run of 6.0 sqmm (FRLSH) copper conductor shall be measured as one unit length.) complete all as specified and directed.
M&L for sub main wiring with two single core 4.0 Sqmm (FRLSH) copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 4.0 Sqmm (FRLSH) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified. ( Note :- Two runs of 4.0 sqmm (FRLSH) and one run of 4.0 sqmm (FRLSH) copper conductor shall be measured as one unit length.) complete all as specified and directed.
Taking down ceiling fan in any description 1200mm/1400mm and keeping insafe castody and refixing the same after repair work complete all as specified and directed.
Taking down Exhaust fan in any description and keeping insafe castody and refixing the same after repair work complete all as specified and directed.
Taking down Geysers in any description and keeping insafe castody and refixing the same after repair work complete all as specified and directed.
S&F MCB SPN 63 Amp 240 volt complete all as specified and directed.
S&F MCB single pole 6 to 32 Amp 240 Volt 'B' curve 10 KA complete all as specified and directed.
Supply and fix flush sheet metal enclosure SPN DB 8 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral links complete including taking down old unsv complete all as specified and directed.
Supply and fix sheet metal enclouser DB 415 V vertical with provn for mounting MCCB 125 Amps IP 54 double door flush sheet metal enclosure DB 4 way 415 V with double door protection detachable gland plates, flush mounting for MCB fitted with bus bar, earth bar and neutral links complete including taking down old unsv complete all as specified and directed.
M&L for MCCB 125 Amps, four pole 16 kA 415 V 'C' curve complete with connection with appropriate size of lugs complete all as specified and directed.
M&L for AC box Modular type with MCB 20 Amps complete all as specified and directed.
Taking down existing iron/ wooden box of any sizeand type complete all as specified and directed.
Supply and fix Meter box flush on wall of suitable size as existing space made out of CRCA sheet of 2 mm thick indoor type totallty enclosed weather ,dust and vermin proof with front opening hinged door and locking arrangement with angle iron frame alround panel body duly grouted on wall, having inner shell for fixation of SPN DB 8 way and space for fixing single phase KWH meter of suitable capacity 01 Nos, Copper lugs, spacers, Mounting Channel, rubber gasket, locking knobs, Hylam sheets pieces, PVC shrinkable connections, suitable compartments and epoxy powder spray painted with one coat primer complete including taking down existing Note : All connection with wiring with 6 sq mm PVC insulated single core multistranded copper conductor drawing through PVC flexible conduit and connected with appropriate size copper thimbles complete all as specified and directed.
Material & Labour for earthing complete including taking out old unsv and replace with galvanised steel earth plate 600x600x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate using 4 mm dia GI wire as earth wire electrode moulded and rivetted to earth plate at one end and connected to main switch/ control switches of buildings at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto main switch board of building including 20 dia bore GI pipe 'light grade' as water pipe from earth chamber and including excavation and earth work, PCC 1:3:6 type C1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced complete all as specified in electric plate No. 3 of SSR Part-I and directed .
Taking down carefully service connection or lawn light cable of any description including making good disturbed surface to match with the existing surface complete all as specified and directed.
M&L for sand cushioning laid in trenches for laying of LT UG cables complete all as specified and directed.
M&L burnt clay Fly ash bricks old size as per IS 13757-1993(Revised 2007) for LT UG cable protection complete all as specified and directed.
Supply and laying & testing UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm, 4 core complete all as specified and directed.
S&F GI tubes light grade of dia 40 mm with all fitting and fixed complete for protection of LT UG cables laid to walls or in floors or along with poles etc complete all as specified and directed.
Supply and laying & testing UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sq mm 2 core complete all as specified and directed. Note : Tenderers may note that amount of credit Rs 2,37,255.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.
UTTRAKHAND BUILDERS
MARUTI BUILDERS
M/S Rajeev Sharma and Co.
QUALITY BUILDERS
REHAN CONSTRUCTIONS
M/S ARORA ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .