Repairing & Renovation work for Different Municipal Buildings Such as Ranip Sub Zonal office, Urban Health Center,Aaganwadi and Other Municipal Buildings in Ranip ward at West Zone.(Capital)

1. Name of Work : Repairing & Renovation work for Different Municipal

Buildings Such as Ranip Sub Zonal office, Urban Health

Center,Aaganwadi and Other Municipal Buildings in Ranip

ward at West Zone.(Capital)

2. Tender Estimated Cost : Rs:- 39,90,000/-

: 1% of the Tender Cost in the form of Rs. 39,900 (D.D. / Pay

3. Earnest Money

- Order / Local Micr Check/B.G.)

4 Tender Fee Rs : Demand Draft of Rs.1500.00

5 S.D. : 5 % of tender amount

6. Time-Limit : 12 months

7. Validity Period : 120 Days

(a) Eligibility Criteria Register “E1” class in PWD in Govt. R&B/CPWD/AMC or

equivalent registration with any other state Govt. or

8. (i) Last Date of Submission of :

Dt.17-07-2026, upto 18:00 hrs.

(ii) Mode of Sending : a) In Sealed cover in duplicate copies by Registered Post

A.D, or by Courier.or hand delivery

b) Tender sent by ordinary post will be rejected out right.

(iii) Description essential to :

a) Name of work, Tender Notice No. & Tender No.

be made on sealed cover

b) Date of receiving tender by Corporations.

(iv) Mode of quoting rates in : The Price bid shall be submitted online only.

Schedule of Quantities and

Rates It shall not be submitted Physically.

9. Date of Opening : Dt.18.07.2026 , 15:00 hrs.

10 Place of Submission & : Submission of EMD. Tender fee and other Documents during office

Opening of Tender hours: On date. 18-07-2026 & 12:00 hrs West Zone, 2nd Floor,

A.M. Office, Dr. Ramanbhai Patel Bhavan, Usmanpura.Ahmedabad

Municipal Corporation, W.Z. Office, Ahmedabad-380013.

11 Penalty Due to Delay of work (1) Rs.1000/- per day (for tenders amounting upto 10 Lakhs), (2)

Rs.2500 per day (for tenders amounting above 10 Lakhs and upto

30 Lakhs), (3) Rs.5000 per day (for all tenders amounting above

Lakhs) but not more then 10% of bill

Defect Liability : As per ‘B-1 Form Close

Whenever a work is allotted by Engineering staff, whether minor or

major of part thereof of any amount, the contractor shall be bound to

start the works within 48 hours of intimation of work. Communication

done telephonically via SMS, Via Whatsapp and through letter / E-

mail shall be considered legal and binding for the same. Failure of

comply to start the works in 48 hours of intimation as above by

Time permitted to start parts

contractor the contractor shall be levied penalty of (1) Rs.1000/- per

day (for tenders amounting upto 10 Lakhs), (2) Rs.2500 per day (for

tenders amounting above 10 Lakhs and upto 30 Lakhs), (3)

Rs.5000 per day (for all tenders amounting above 30 Lakhs). Three

times failures by contractor shall make contractor responsible to be

black listed unless and otherwise justified properly in writing /

binding within 15 days of last notice of penalty.

 The staff of the contractor shall wear safety jackets,

hoes, helmets etc. while on duty and any violation will attract

fine of Rs. 5,000/- for each incident.

Safety Failure to erect safety signage or trying to carry out he

works without proper precautions/safety measures as

equired will attract a fine of Rs. 5,000/- for each incident.

The contractor shall be responsible to make good and remedy at

his own expense any defect which may develop or may be noticed

before the period mentioned hereunder from the certified date of

completion, The within 15 days of receipt of the notice. In the case

of failure on the part of the contractor, the Engineer-in-charge may

rectify or remove or re-execute the work at the risk & cost of the

contractor. The Engineer-in-charge shall be entitled to appropriate

the whole or any part of the amount of security deposit towards

the expenses, if any, Incurred by him in rectification, removal or re-

execution. The Defects Liability period shall be as under(a) for all

works costing upto Rs. 50,000 ( amount put to tender), the period

shall be 3 months from the certified date of completion.

Defect &Liability Period

14 (b) for all works costing more than Rs. 50,000 and upto Rs. 1 crore

(amount put tender), the period shall be 6 months from the

certified date of completion or one monsoon, whichever is later.

(c) for major projects costing more than Rs. 1 crore, the period

shall be 12 months from the certified date of completion which

should include one monsoon.

(d) For building works, the period specified in (a), (b) or (c) above

OR elapse of monsoon period following the certified date of

completion, whichever is later. For the purpose of deciding the

monsoon period, the 30th September may be treated as the last

Compensation for Delay 10% of Remaining work (As per Circular)

Whenever a work is allotted by Engineering staff, whether minor

or major of part thereof of any amount, the contractor shall be

bound to start the works within 48 hours of intimation of work.

Communication done telephonically via SMS, Via Whatsapp and

through letter / E-mail shall be considered legal and binding for

the same. Failure of comply to start the works in 48 hours of

Time permitted to start parts intimation as above by contractor the contractor shall be levied

16 of work penalty of (1) Rs.1000/- per day (for tenders amounting upto

Lakhs), (2) Rs.2500 per day (for tenders amounting above

Lakhs and upto 30 Lakhs), (3) Rs.5000 per day (for all tenders

amounting above 30 Lakhs). Three times failures by contractor

shall make contractor responsible to be black listed unless and

otherwise justified properly in writing / binding within 15 days of

last notice of penalty.

Addendum/Corrigendum If any Shall be Published 48 Hrs. Price To

the Final Submission Time And Date. The Same Shall From a part Of

Addendum/Corrigendum

17 Tender And The Same As to be Attached Along With The Tender

EPF Act As per Acoount Department circular no-27, Date:07/01/2026

GST will be paid extra by AMC/Authority at prevailing rate to the

Signature of contractor

Add. City Engg.(West Zone)

Name : Ahmedabad Municipal Corporation

Company's Seal :Date :

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTMENT-WEST ZONE

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTMENT-WEST ZONE

Name of Work:- Repairing & Renovation work for Different Municipal Buildings Such as Ranip Sub Zonal

office, Urban Health Center,Aaganwadi, School, Toilet,Urinal & Municipal Garden and Other Municipal

Buildings in Ranip ward at West Zone

Sr. No. Qty Description of Item Rate in Rs. Per Amount

1a 1183.948 Excavation for foundation up to1.5 m depth 115.92 Cmt

including sorting out and stacking of

useful materials and disposing of

theexcavated stuff upto 50 Meter

lead.(A) Loose or soft soil (SOR

WITHOUT GST AH.CITY-2023-24 -

b 10 1.5 to 3.0 mt.depth (SOR WITHOUT GST 128.52 Cmt

c 10 Excavation for foundation for depth from 3.0 141.11 Cmt

m to 5.0 m including sorting out and

stacking of useful materials and disposing

off the excavated stuff upto 50 Meter

lead.(A) Loose or soft soil (SOR WITHOUT

GST AH.CITY-2023-24 - 04002A)

d 10 Excavation for foundation for depth from 1.5 270.83 Cu.M.

m to 3.0 m including sorting out and

stacking of useful materials and disposing

off the excavated stuff upto 50 Meter

lead.(C) Hard Murrum

2 10 Filling available excavated earth 129.10 Cmt

(excluding rock) in trenches, plinth, sides of

foundations etc. in layers not exceeding

20 cm. in depth consolidation each

deposited layer by ramming and watering.

3 10 Filling in plinth with sand 455.63 Cmt

underfloors including watering

ramming, consolidating and dressing etc.

4 10 Filling in foundation and plinth with murrum 286.20 Cmt

or selected soil in layers of 20 cm.

thickness including watering,

ramming and consolidating etc.

5 20 Providing and laying cement 2492.51 Cmt

concrete1:5:10 (1-Cement: 5-

coarses sand and:10-hand broken stone

aggregates 40mm nominal size) and

curing complete excluding cost of

formworkin (A) Foundation and Plinth

6 20 Providing and laying cement 2634.11 Cmt

concrete1:4:8 (1-Cement: 4-

coarses and:8-hand broken stone

aggregates 40mm nominal size) and

curing complete excluding cost of

formworkin (A) Foundation and Plinth

7 10 Providing and laying cement concrete 1:3:6 2956.44 Cmt

(1-Cement : 3- coarse sand : 6- hand

broken stone aggregates 40 mmnominal

size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth..

8 10 Providing and laying cement 4006.15 Cmt

concrete 1:3:6 (1-Cement:3-coarse sand:6-

hand broken stone aggregates

20mm nominal size) and curing complete

including cost of formwork in (A) wall

caps/coping (upto 10 ton)..

9 Providing and laying cement

concrete work 1:2:4 ((1-Cement:2- coarse

sand:4-graded aggregates 20mm

nominal size) curing complete

excluding cost of formwork and

a 10 Foundations, footings, base or 3923.53 Cmt

columns and mass concrete

b 10 Slabs, landing, shelves, balconies, lintels, 4012.47 Cmt

beams, girders and cantilivers upto

floor two level

c 10 Independent piers, columns, and pillars, 4012.47 Cmt

upto floor two level

10 10 Provdg. & laying cement concrete 1:2:4 6487.07 Cu.M.

(1 cement : 2 coarse sand : 4 graded stone

aggregates 20 mm nominal size) for

reinforced concrete chhajjas not

exceeding 10 cm. thickness upto floors

two level including finishing the

exposed surfaces with cement mortar

1:3 (1 cement : 3 find sand) to give a

smooth and even surface centering and

form work and curing complete

excluding cost of reinforcement.

11 10 Providing and laying controlled cement 3871.39 Cum

M.150 for curing complete excluding cost of

formwork and reinforcement for reinforced

concrete work in (A) Foundations,

footings,Base of

columns and Mass concrete

11A 5 Providing and laying in position Ready 3790.21 Cmt

Mixed M-150 grade concrete for

reinforced cement conctere work,

using cement content as per approved

Design Mix manufactured in fully

automatic batching plant and

transported to site of work intransit mixer

for a lead up to 10 kms having

continuous agitated mixer, manufactured

as per mix design of specified grade for

reinforced cement concrete work

including pumping of R.M.C. from

transit mixer to site of laying, excluding

the cost of centering shuttering

finishing and reinforcement

including cost of admixtures

inrecommended proportions as per

IS:9103 to accelerate/ retard setting

of concrete, improve work ability without

impairing strength and durability as per

direction of theEngineer-in-charge. Without

Fly Ash (Min cement level as per latest

IS456 shall be maintained)

12 5 Providing and laying in position Ready 4793.10 Cmt

Mixed M-200 grade concrete for

reinforced cement conctere work,

using cement content as per approved

Design Mix manufactured in fully

automatic batching plant and

transported to site of work intransit mixer

for a lead up to 10 kms having

continuous agitated mixer, manufactured

as per mix design of specified grade for

reinforced cement concrete work

including pumping of R.M.C. from

transit mixer to site of laying, excluding

the cost of centering shuttering

finishing and reinforcement

including cost of admixtures in

recommended proportions as per IS:9103

to accelerate/ retard setting of

concrete, improve work ability without

impairing strength and durability as per

direction of theEngineer-in-charge. Without

Fly Ash (Min cement level as per latest

IS456 shall be maintained)

12a 5 Providing and laying controlled cement 3977.88 Cum

M.200for curing complete excluding cost of

formwork and reinforcement for reinforced

concrete work in (A) Foundations,

footings,Base of

columns and Mass concrete

b 5 Walls, from top of foundation level upto 4484.17 Cum

floor two level

c 5 Slabs,landing,shelves,Balconies Lintels, 4460.36 Cum

Beams, Girders and Cantilever upto floor

d 5 Columns, Pillars posts and struts upto floor 4558.20 Cum

e 2 Staircases excluding landing upto floor two 5418.91 Cum

f 2 Vertical and Horizontial its upto floor two 4701.97 Cum

13 5 Providing and laying in position Ready 4853.56 Cmt

Mixed M-250 grade concrete for

reinforced cement conctere work,

using cement content as per approved

Design Mix manufactured in fully

automatic batching plant and

transported to site of work intransit mixer

for a lead up to 10 kms having

continuous agitated mixer, manufactured

as per mix design of specified grade for

reinforced cement concrete work

including pumping of R.M.C. from

transit mixer to site of laying, excluding

the cost of centering shuttering

finishing and reinforcement

including cost of admixtures in

recommended proportions as per IS:9103

to accelerate/ retard setting of

concrete, improve work ability without

impairing strength and durability as per

direction of theEngineer-in-charge. Without

Fly Ash (Min cement level as per latest

IS456 shall be maintained)

(Cement level 450 kg )

13A Providing and laying controlled cement

concrete M.250 and curing complete

excluding the cost of formwork and

reinforcement for reinforced concrete work

B 5 Foundations, footings, Base of columns 4238.04 Cu.M.

and Mass concrete.

C 2 Walls, from top of foundation 4519.88 Cu.M.

level upto floor two leve

D 2 Slabs,landing,shelves,Balconies, Lintels, 4496.07 Cu.M.

Girders and Cantilever upto floor two level.

E 2 Columns, Pillars posts and 4593.91 Cu.M.

struts, upto floor two level.

14 2 Providing and laying in position Ready 5043.66 Cum

Mixed M-300 grade concrete for reinforced

cement conctere work , using cement

content as per approved Design Mix

manufactured in fully automatic batching

plant and transported to site of work in

transit mixer for a lead up to 10 kms having

continuous agitated mixer, manufactured as

per mix design of specified grade for

reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site

laying, excluding the cost of centering

shuttering finishing and reinforcement

including cost of admixtures in

recommended proportions as per IS:

to accelerate/ retard setting of

concrete, improve workability without

impairing strength and durability as per

direction of the Engineer - in - charge.

Without Fly Ash (Min cement level as per

shall be maintained)

15 4 Providing and laying in position Ready 5140.94 Cum

Mixed M-350 grade concrete for reinforced

cement conctere work , using cement

content as per approved Design Mix

manufactured in fully automatic batching

plant and transported to site of work in

transit mixer for a lead up to 10 kms having

continuous agitated mixer, manufactured as

per mix design of specified grade for

reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site

laying, excluding the cost of centering

shuttering finishing and reinforcement

including cost of admixtures in

recommended proportions as per IS:

to accelerate/ retard setting of

concrete, improve workability without

impairing strength and durability as per

direction of the Engineer - in - charge.

Without Fly Ash(Min cement level as per

shall be maintained)

15a 2 Providing and Laying ordinary cement 8341.79 Cum

concrete 1:2:4 (1-Cement 2-coarsesand:

4-graded stone aggregates 20 mm

nominal size) and finishing smooth with

curing etc. complete including the cost of

form work but excluding the cost of

reinforsement for R.C.C work in (iv)

Slabs having more than 13 cm and upto

15b 2 Providing and Laying ordinary cement 7380.23 Cum

concrete 1:2:4 (1-Cement 2-coarsesand:

4-graded stone aggregates 20 mm

nominal size) and finishing smooth with

curing etc. complete including the cost of

form work but excluding the cost of

reinforsement for R.C.C work in (iv)

Slabs having more than 8 cm and upto

15c 2 Providing and laying ordinary cement 8634.45 Cum

concrete 1:2:4 (1- Cement 2- coarse sand :

4- graded stone aggregates 20 mm nominal

size) for R.C.C lintel including finishing

smooth with,curing etc. complete including

the cost of formwork but excluding the cost

of reinforcement.

16 Brick work using common burnt clay

building bricks having crushing

strength not less than 35kg./Sq.Cm.in

foundation and plinth in Cement

Mortar1:5 (1-Cement :5 - fine

10 (A) Conventional (upto 10 ton) 4011.66 Cmt

10 B) Modular 4345.02 Cmt

17 Extra Rate for brickwork in Above

Item for super structure above plinth

level upto floor two level (B) Conventional

a 10 (A) Conventional (upto 10 ton) 272.25 Cmt

b 10 B) Modular 262.35 Cmt

c 10 C) above floor two level Item No. 2(6.13) 42.66 Per

(A) Modular Floor Per

d 10 D) above floor two level Item No. 2(6.13) 40.09 Per

(B) Conventional Floor Per

18 5 Half brick masonry in common brunt 593.90 Smt

clay building bricks having crushing

strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:4 ( 1-Cement : 4 coarse

sand ) in foundation and

Plinth conventional brickwork (up to

ton) (B) Conventional

19 5 Extra for half brick masonry in super 52.80 Smt

structure above plinth level upto floor

two level (B) conventional

20 5 Providing and laying Pre cast Light weight 747.00 Sqm

concrete hollow core wall with hollow

core concrete unit of approved make &

size of 92 mm thick, 600 mm wide and

mm/ 3300 mm in legth made from of

controlled cement concrete M20 having

cube compressive strength not less than

20 MP a jointing with high strength &

tensile adhesion non-shrink

cementitious joint compound /P.U.

Foam. (Plaster not required)

21 1 Providing and laying Pre cast Light weight 842.00 Sqm

concrete hollow core wall with hollow

core concrete unit of approved make &

size of 120 mm thick, 600 mm wide and

mm/ 3300 mm in legth made from of

controlled cement concrete M20 having

cube compressive strength not less than

20MP a jointing with high strength &

tensile adhesion non-shrink

cementitious joint compound/ P.U.Foam.

(Plaster not required)

22 1 Providing and laying Pre cast Regular 777.00 Sqm

concrete hollow core wall with hollow

core concrete unit of approved make &

size of 92 mm thick, 600 mm wide and

mm/ 3300 mm in legth made from of

controlled cement concrete M35 having

cube compressive strength not less than

35 MP a jointing with high strength &

tensile adhesion non-shrink

cementitious joint compound/ P.U.Foam.

(Plaster not required)

23 1 Providing and laying Precast 875.00 Sqm

Regular concrete hollow core wall with

hollow core concrete unit of approved

make & size of 120 mm thick, 600 mm wide

and 2400 mm/ 2600 mm/ 2850 mm/

mm/ 3300 mm in legth made from of

controlled cement concrete M35 having

cube compressive strength not less than

35 MP a jointing with high strength &

tensile adhesion non-shrink

cementitious joint compound /P.U.Foam.

(Plaster not required)

24 Providing form work in ordinary timber

planking so as to give a rough finish

including centering, shuttering, strutting

and propping etc. height of propping

and centering below supporting floor to

celling not exceeding 4 M & removal

of the same for in situ reinforced or

plain concrete work upto floor four level

a 2 Foundation, footings, bases of 171.68 Smt

columns etc. and mass concrete.

b 2 (B) Flat surfaces such as soffits of 252.00 Smt

supspened floors slabs Landings and the

like. (1) Floors etc. upto 200 mm in

c 2 (B) Flat surfaces such as soffits of 270.90 Smt

suspended floor roof slabs Landings and

the like. (2) Floors etc. above 200mm in

d 2 Vertical surface such as walls (any 229.95 Smt

thickness) partitions and the like including

attached buttresses & string course & the

e 2 (ii) Sides And Soffits Of Beam, 192.15 Smt

Haunchings Cantilevers, Girders,

Bressumers And Lintels Not

Exceeding 1 M In Depth.

f 2 (G) Columns PillarsPosts and struts. (1) 297.68 Smt

Square Rectangular Polygonal in plan.

g 2 (2) Circular or curved in plan. 422.10 Smt

h 2 (H) (2) Sides and soffits of Beams Beam 192.15 Smt

Haunchings canti-levers Girders

Bressumers and Lintels exceeding 1M.in

25 Providing and fixing 35 mm thick

shutters for Doors, windows and clear

story windows including anodised

alluminium butt hinges with necessary

a 2 (A) Indian Teak Wood (ii) Fully 4788.50 Smt

b 2 (B) Indian Teak Wood (ii) Fully 5478.89 Smt

c 2 (C) Indian Teak Wood (iii) Partly 5133.69 Smt

panelled and partly glazed.

26 Providing and fixing 35 mm thick

shutters for Doors, windows and clear

story windows including black enamelled

M.S.butt hinges with necessary screws.

a 2 (A) Indian teak wood. (i) Fully 5285.45 Smt

Panelled.(upto 10 ton)

b 2 (A) Indian teak wood. (ii) Fully 4595.06 Smt

Glazed.(upto 10 ton)

c 2 (A) Indian teak wood. (iii) Partly panelled 4940.25 Smt

and partly glazed. (upto 10 ton)

27 Providing and fixing 35 mm thick

panelled, glazed or panelled and glazed

shutters for Doors windows and clear story

windows including anodised alluminium

But hinges with necessary screws and

indian teak wood shutters with.

a 2 (A) Plywood sheet panels. 3178.88 Smt

b 2 (B) Particle board panels 3184.01 Smt

c 2 (C)Hard board panels. 3153.15 Smt

d 2 (D) Asbestos sheet panels. 3126.32 Smt

28 2 Providing and fixing 25 mm thick 3006.75 Smt

shutters for cup boards etc.

including black enamelled M.S. butt

hinges with necessary screws.(A) Indian

teak wood. (i) Fully Panelled. (upto

a 2 Providing and fixing 25 mm thick shutters 2594.74 Smt

for cupboards etc. including anodised

butt hinges with necessary screws. (A)

Indian teak wood. (ii) Fully Glazed.

b 4 Providing and fixing 25 mm thick shutters 2814.42 Smt

for cupboards etc. including anodised

alluminium butt hinges with necessary

screws. (A) Indian teak wood. (ii) Partly

panelled and partly glazed.

29 10 Providing and fixing plain asbestos cement 827.20 Smt

sheet 6 mm thick in partitions

including fixing to fames with screws etc,

complete with 50 mm x 12 mm

Deodar wood beading (Frames to

be paid separately) (upto 10 ton)

30 5 Providing and fixing in partitions 4 mm thick 516.60 Smt

medium hard board of approved quality

including fixing to fames with screws etc

complete with 50 mm x 12 mm teak

wood beading (Frames to be paid

separately) (upto 10 ton)

31 5 25 mm thick wooden shelves 1306.61 Smt

supported on 40 x 40 mm x 6 mm T or L

iron brackets fixed at suitable

distances but not exceeding

cm. apart with Mango wood or

equivalent quality. (upto 10 ton)

32 5 40 mm thick wooden shelves 1691.00 Smt

supported on 40 x 40mm x 6 mm T or L iron

brackets fixed at suitable distances not

exceeding 75cm. Apart with Mango

wood or equivalent quality. (upto 10 ton)

33 100 Providing and fixing M.S. round or square 68.53 kg

bars with M.S. flats at required spacing

in wooden frames of windows and

clerestory windows.(upto10 ton)

34 100 Providing and fixing M.S. grills of 100.17 kg

required pattern to wooden frames of

windows etc. with M.S. flats at required

spacings and frame alround, square or

round bars with round headed bolts and

nuts or by screws (A) Plain Grill. (upto

a 4 Providing and fixing M.S. grills of 143.64 kg

required pattern to wooden frames of

windows etc. with M.S. flats at required

spacings and frame alround, square or

round bars with round headed bolts and

nuts or by screws (A) Ornamental Grill.

35 4 Providing and fixing glazed louvered 4102.54 Smt

glass windows and ventilators with

teak wood frame 10 cm. x 7 cm. size

including 3 coats of oil painting to wood

work etc.complete. (upto 10 ton)

36 8 Providing and fixing glazed louvered 4332.47 Smt

glass windows and ventilators with

teak wood frame 10 cm.x7 cm. size

including 3 coats of oil painting to wood

work etc.complete.with wooden louvers

plank 12mm thick (upto 10 ton)

37 20 Providing and fixing 35 mm thick 3211.96 Smt

shutters for Doors, windows and clere

story windows including Indian teak

wood frames 10 cm x 7 cm. size

including anodized alluminium fixtures

and fastenings including primer coat of

approved quality and two coats of oil

painting etc, complete.(ii) Fully Glazed.

38 8 Providing and fixing 35 mm thick 3902.35 Smt

shutters for Doors, windows and clere

story windows including Indian teak

wood frames 10 cm x 7 cm. size including

black enamelled iron oxidixed

fixtures and fastenings including primer

coat of approved quality and two coats of

oil painting etc, complete.(ii) Fully

a 8 Providing and fixing 35 mm thick shutters 3557.15 Smt

for Doors, windows and clerestory windows

including Indian teak wood frames 10 cm x

7 cm. size including anodized alluminium

and fastenings including primer coat of

approved quality and two coats of oil

etc, complete. (iii) Partly panelled and partly

39 2 Providing and fixing 30mm thick FACTORY 2214.00 Smt

SOLID BOTH SIDE PRELAM PANEL PVC

SHUTTER consisting of frame made out of

M.S.tubes of 19 gauge thickness and size

of 19mm x 19mm for stiles, top and bottom

rails. M.S. frame shall have a coat of steel

primer of approved makde

and manufactures. M.S frame covered with

5mm thick heat moulded prelim PVC ‘C’

channel of siz 30mm thickness, 70 mm

width of which 50mm shall be flat and

20mm shall be tapered in 45 degree Angle

on either side forming stiles, and 5mm thick,

95mm wide pream PVC sheet out of which

75mm shall be flat and 20mm shall be

tapered in 45 degree on the inner side ot

form top and bottom rail and 115mm wide

prelim PVc sheet out of which

75nmm shall be flat and 20mm shall be -

75nmm shall be flat and 20mm shall be

tapered on both side to form lock rail, Top,

and lock rails shall be provided either side

of the panel. 10mm (5mm x 2) thick 20mm

wide cross PVC sheet shall be provided as

gap insert for top rail and bottom rails.

Panelling of 5mm thck both side prelim PVC

sheet to be fitted in the M.S. frame

welded,sealed to the stiles and rails with

7mm (5mm + 2 mm) thick x 15mm wide

PVC sheet beading on inner side, and

joined togeth with

solvent cement adhesive. An additional

5mm thick PVC strip of 20mm width is to be

stuck on the interior side of the ‘C” chanel

using PVC solvent adhesive etc. complete

as per direction of Engineering in charge,

manufacture’s specification and rawing.

40 2 Providing and fixing in position 5391.23 Sq.M.

collapsible steel shutters with vertical

channels 20 x 10 x 2 mm braced with flat

iron diagonal 20 x6 mm size with top

and bottom rails T iron 40 x 40 x 6 mm with

38 mm dia steel pulleys complete with bolts,

units, locking arrangements, stoppers,

handles, including a priming coat of

red lead paint & approved make.

41 2 Providing and fixing 1 mm thick M.S. 3652.12 Sqm

sheet sliding shutters with frame and

diagonal braces of 40x40x6 mm angle

iron, 3.15 mm M.S.gusset plates at

Junctions and corners 25 mm dia.

pulley, 40x40x6 mm angle and T-iron

huide rail at top and bottom

respactively with handles, stoppers and

locking agangement etc, including

applying a priming coat of red lead paint.

42 2 Providing and fixing rolling shutters of 3468.72 Sqm

approved make made of 80 mm wide

M.S.laths inter-locked together through

their entire length and jointed together at

theends by end locks mounted on

specially designed pipe shaft with

bracket plates, guide channels

and arragements for inside and out

side locking with push-pull

operation including the cost of hood

cover and spring etc. complete. (A)

Shutters having width below 3.5 M.

a 2 Providing and fixing rolling shutters of 4450.51 Smt

approved make made of 80 mm wide

M.S.laths inter-locked together through

their entire length and jointed together at

theends by end locks mounted on

specially designed pipe shaft with

bracket plates, guide channels

and arragements for inside and out

side locking with push-pull

operation including the cost of hood

cover and spring etc. complete. (A)

Shutters having 3.5 M. & Above

43 2 Providing and fixing extruded aluminum 2119.14 Smt

window having extruded aluminum Colour

Powder Coated section frame main outer

size 127mm x 38.10mm x

1.35mm ,@ Wt.1.384 Kg/mt,horizontal Four

track member size 122.20mm x 31.75mm x

1.10mm @ Wt. 1.205 Kg/mt,vertical

member of size 122.20mm x 31.75mm x

1.50mm ,@ Wt. 1.398 Kg/mt with sliding

shutters of horizontal member size 40mm x

0.456Kg/mt,vertical member of size 40mm x

with 5 mm thick transparent bronze colour

tinted float glass with powder coated

aluminum fittings and fixtures and

transparent silicon sealant glass fixing to

frame as per details etc complete for

44 2 Providing and fixing window having 1696.73 Sq. M.

extruded aluminum Colour anodized

section frame main outer size 63.50 x

x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal

two track member size 61.85 mm x

mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical

member of size 61.85 mm x 31.75mm x

1.30 mm @ wt.of 0.659 Kg/mt with sliding

shutters of horizontal member size 40mm x

vertical member of size 40mm x 18mm x

Kg/mt with 5 mm thick transparent bronze

colour tinted float glass with powder coated

aluminum fittings

and fixtures and transparent silicon sealant

glass fixing to frame as per details etc

complete for window.

45 2 Providing & Fixing in position 1288.93 Sq. M.

Alluminium vents with frame using

approved anodised extruded

alluminium section as approved by Engg.

In charge.(Jindal alluminium) units

equivalent Approved Rate)Frame section

0.68Kg/Rmt) incl. Providing & Installing

mmthick approved color Acrylic sheet of

standard quality etc. comp.

46 2 Providing and fixing standared 1163.92 Sq. M.

extruded of alluminium section of size

63 mmx38.10 mmx1.2 mm (Jindal

Section:2434, @ Wt.0.643 Kg/mt) with

colour anodized alluminium frame for

ventilation with 5 mm thick frosted glass

as details etc complete for Ventilation

47 2 Providing and fixing standared extruded of 1509.90 Sq.M.

alluminium section of size 63.50 x 38.10 x

mm,@ Wt 1.094Kg / Rmt with colour

Powder Coated alluminium frame with

mm thick transparent bronze colour tinted

float glass as details etc complete for Fix

48 10 Providing and laying 40 mm thick marble 749.70 Sqm

chips flooring rubbed and polished

(I.E.terrazo) to granolithic finish with under

layer 30 mm thick cement concrete1:2:4

(1-Cement: 2-coarse sand: 4-graded

stone aggregate 10 mm and down

gauge) and to player 10 mm thick with

white, black or white and blak marble cihps

of required sizes from 1 mm to 4 mm

nominal size laid in cement marble powder

mix 3:1 (3- Cement:1-Marble powder

by weight) in proportion of 4:7 (4-

Cement: 7-marble chips by volume)

(C) Medium Shade pigment with

approx 50% white cement and 50%

ordinary cement (In top layer only) (upto

49 5 Providing and laying marble chips skirting 869.40 Sqm

(Terrazo) or dedo rubbed, and polished to

Granolithic finish to player 6 mm white,

black or white and black marble chips

of size from smallest to 4 mm nominal

size laid in cement marble powder mix 3:1

(3-Cement: 1 marble powder by weight)

in proportion of 4:7 (4-cement marble

powder mix: 7-marble chips by volume) (B)

Light shade pigment with white cement (In

top layer only)

50 5 Providing and laying white glazed tiles 6mm 908.17 Sq.M.

thick in flooring treads of steps and landing

laid on a bed of 12mm thick cement mortar

1:3 (1-cement : 3-coarse sand ) finishing

with flush pointing in white cement.

51 10 Providing and laying Ceramic tiles 6 mm 960.47 Sq.M.

thick in flooring treads of steps and

landing laid on a bed of 12 mm thick

cement mortar 1:3 (1- cement :3-coarses

and) finishing with flush pointing in white

cement. (upto 10 ton)

52 10 Providing & Fixing 2mm Aluminium / 5832.20 Smt

4mmACP sheeting fixed with Type-11

Class-C High Intensity Grade Sheeting as

per IRC 67 : 2012 reflective sheeting of size

including lettering and signs as

53 25 Providing and laying Vitrified tiles 8 to 10 1469.91 Sq.M.

mm thick, 36''x36'' in flooring treads of steps

and landing laid on a bed of 12 mm

thick cement mortar 1:3 (1-cement:3-

coarses and) finishing with flush pointing

inwhite cement. (upto 10 ton)

54 20 Providing and laying Vitrified tiles 8 to 10 1062.50 Sqm

mm thick, 24''x24'' in skrting risers of steps

and dedo on 10 mm thick cement

plaster 1:3 (1- cement: 3-coarse

sand) and jointed with white cement

slurry (upto 10 ton)

55 20 Providing and laying Vitrified tiles 8 to 10 1523.61 Sqm

mm thick, in skrting risers of steps and

dedo on 10 mm thick cement plaster

1:3 (1-cement:3- coarse sand) and

jointed with white cement slurry (upto

56 10 Providing and laying 24" x 24" vitrified 1527.00 Sq. M.

Tiles 8 to 10 mm th. Double

Charged gloosy/ Matt of Approved make

as approved by Adl.C.E. / consultants

in flooring over 20 mm thick cement

mortar 1:6 (1 cement : 6 coarse sand)on

new surface& jointed with colour cement

slurry incl with flush pointing &

cleaning the surface etc. comp.

57 10 Providing and laying 24" x 24" vitrified 165.00 Rmt

8 to 10 mm th.Double Charged

Gloosy / Matt tiles of Approved make

as Approved by Adl.C.E. / Consultants for

upto 10 cm high skirting as approved by

Engineer in charge over 10 mm thick

cement mortar 1:6 (1 cement : 6 coarse

sand)on new surface& jointed with colour

cement slurry incl with flush pointing &

cleaning the surface etc. comp.

58 10 Providing and laying polished Kota stone 982.83 Sq.M.

slab flooring over 20 mm (Average)

thick base of cement mortar 1:6 (1-

cement:6-coarses and) or L.M.1.1.5

(1-Lime putty:1.5-coarses and) laid over

and jointed with grey cement slurry mixed

with pigment to match the shade of

slab including rubbing and polishing etc.

complete. (A) 25 mm thick (upto 10 ton)

59 5 Providing and laying marble stone slab 2194.63 Sq.M.

flooring over 20mm (average)base of

cement mortar 1:6 (1-cement : 6 coarse

sand) or L.M. 1:1.5(1- lime putty : 1.5 -

coarse sand) laid and jointed with gray

cement slurry including rubbing and

polishing complete. (A) Marble slab 25mm

60 5 Providing and laying polished Kota stone 1085.48 Sq.M.

slab flooring over 20 mm (Average)

thick base of cement mortar 1:6 (1-

cement:6-coarses and) or L.M.1.1.5 laid

over and jointed with grey cement

slurry including rubbing and polishing

etc.complete. (B) 30 mm thick (upto

61 5 Providing and laying polished kota stone 1176.03 Sq.M.

slab 25 mm thick in risers of steps, skirting

Dedo and pillars laid on 10 mm thick

cement mortar 1:3 (1-Cement :3 coarses

and) and jointed with gray cement

slury mixed with pigment to match the

shade of slab including rubbing and

polishing etc.complete. (upto 10 ton)

62 5 Providing and laying cement 297.68 Sq.M.

concrete flooring 1:2:4 (1-cement: 2-

coarses and:4-graded stone aggregate

20mm nominal size) laid in one layer and

finished with a floating coat of neat

cement. (A) 40mm thick. (upto 10 ton)

63 5 Providing and laying cement 348.08 Sq.M.

concrete flooring 1:2:4 (1-cement: 2-

coarse sand:4-graded stone aggregate

20mm nominal size) laid in one layer and

finished with a floating coat of neat

cement. (B) 50mm thick. (upto 10 ton)

64 5 Providing and fixing pre-cast 376.43 Rmt

concrete kerb stone of gray cement

based concrete block 30 cm length,

cm height and 15 cm thick of M200 grade

concret as per approved design and

including excavation for fixing in proper line

and level, filling the joint with C:M 1:3 (1

cement :3 fine sand) etc complete. (upto

65 4 Providing and fixing pre-cast Rubber Dye / 680.10 Smt

steel Dye inter locking concrete block

with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as

approved design Confirming to IS 15658 :

2006 including 35 mm Sand layer for

and filling the joint with sand in proper line

and level as per guidlines of IRC : SP 63-

2018 etc. Complete.

66 10 Providing and laying broken china mosaic 739.89 Sqm

flooring for terrace using 12 mm to 20 mm

broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to

be tempered to bring mortar creme out

upto surface using white cement

including rounding off junctions and

extending them up to15 cm along the

wall, clearing with water and oxalic

acid etc.asdirected.

67 5 Providing and laying coloured glazed 1426.95 Sqm

tiles of the size 300 mmx200 mmx8

mm/300 mmx450 mmx8 mm in skirting,

risers of steps and dedo on 10 mm.

thick cement plaster 1:3 (1cement:

coarse sand) & jointed with white

68 10 Providing corrugated G.I. sheet of class-3 719.93 Sqm

roofing fixed with glavanished iron

J or L Hooks, Bolts and nuts 8 mm

diameter with bitumen and G.I. limpet

washer or G.I. limpet washer. filled with

white lead complete excluding the cost of

purlins, Rafters and Trusses. (1) 0.80 mm

thick sheet.(up to10 ton)

69 5 Providing ridges or hips 600 mm over 635.58 Sqm

allin plain G.I. sheet class-3 fixed with

G.I. J or L Hooks and nuts 8 mm dia

G.I. Limpet and bitumen washer complete.

70 5 Providing and fixing 150 mm wide 450 mm 555.71 Sqm

over all semi circular plain G.I.sheet class-

3 gutter with Iron brackets 40 mmx3 mm

size Bolts, Nuts, washers etc.

including making necessary connection with

rain water pipes. (i) 0.80 mm thick

71 5 Providing and fixing five courses water 466.84 Sqm

profing treatment with bitumen felt

consisting of second and fourth course

of blown/ bitumen or/and residual

bitumen applied hot at 1.2 kg.per

Sq.M.of area for each course and first

course with fibre base bitunen

saturated under lay type land third course

with fibre base self finished felt type

grade 1 and fifth and final course of

stone grit 6 mm and down size or pea

sizes gravel spread at

0.008 Cu.Metre/Sq.metre preparation of

surface excluding grading complete. (upto

10 ton) including

72 50 Providing and fixing on wall face C.I. 283.62 Rmt

Rain water pipe including filling the joints

with spun yarn soaked in neat cement

slurry and cement mortar 1:2(1-

Cement : 2-fine sand) (A) 75 mm dia.

73 300 Providing 15 mm thick cement plaster 174.83 Sqm

in single coat on Rough (Similar) side of

single or half brick walls for interior

plastering up to floor two level and

finished even and smooth in (i) Cement

mortar 1:3 (1-cement :3-sand)

74 100 Providing 20mm thick sand faced cement 215.78 Sqm

plaster on walls upto height 10 metres

above ground level consisting of 12mm

thick backing coat of C.M. 1:3 (1-cement :

3-sand) and 8mm thick finishing coat of

C.M. 1:1 (1-cement : 1-sand) etc. complete.

75 100 Colour washing with lime on wall surface 12.29 Sqm

(two coats) over and including a

primary coat of white washing to give an

even shade after through brooming the

surface to remove all dirt, dust,

mortar drops and other foreigh matter.

76 100 Removing dry or oil bound 11.19 Sqm

distemper by a washing and

scraping and sand papering the wall

surface smooth including necessary

repairs to scratches complete.

77 100 Distempering with dry distemper of 46.94 Sqm

approved brand and manufacture (two

coats) and of required shade on wall

surfaces of given an even shade, over

and including a priming coat of

whiting after thoroughly brooming the

surface free from mortar dropping

and other foreign matter.

77 a 100 Extra Coat for Above Item over above 30.09 Sqm

for every subsequent coat of

approved brand and manufacture.

78 100 Distempeing (Two coats) with oil bound 76.08 Sqm

distemper of approved brand and

manufacture and of required shade on

wall surfaces to give an even shade,

over and including a priming coat

with distemper primer of approved

brand and manufacture after

thoroughly brushing the surface free

from mortar dropping and other

foreign matter and also including

preparing the surface even and sand

papered smooth.

79 2000 Extra Coat for Above Item over above 8.04 Sqm

for every subsequent coat of

approved brand and manufacture.

80 2000 Wall painting (two coats) with plastic 78.44 Sqm

emulsion paint of approved brand and

manufacture on undecorated wall

surface to give an even shade including

throughly brushing the surface free

from mortar droppings and other foreign

matter and sand papered smooth.

81 500 Extra over item for every sub sequent 33.39 Sqm

coat of wall painting with plastic emulsion

paint of approved brand

81 a 500 Extra over item for painting with plastic 5.36 smt

emulsion paint of approved brand on

ceilings and sloping roofs.

82 500 Applying priming coat over new steel 34.34 Sqm

and other metel surface after and

including preparing the surface by

throughly cleaning, oil, grease, dirt and

other foreign matter and scoured with

brushes fine steel wood, scrapers and sand

paper with ready mixed priming paint

brushing red lead.

83 500 Painting two coats (excluding priming 86.94 Sqm

coat) on new steel and other metal

surface with enamel paint, brushing,

interior to give an even shade including

cleaning the surface an even shade

including cleaning the surface of all dirt,

dust and other foreign matter.

84 500 Painting one coats (excluding priming 54.35 Sqm

coat) on previously painted steel and other

metal surface with enamel paint, brushing

to give an even shade including cleaning

the surface of all dirt, dust and other

foreign matter.

85 500 Extra over item for 83 & 84 every sub 50.40 Sqm

sequent coat of paint.

86 500 Painting two coats (excluding priming 64.66 Sqm

coat) on new steel and other metal

surface with synthetic enamel paint,

brushing to give an even shade including

cleaning the surfaceofalldirt,dust and other

foreign matter.

87 500 Painting one coats (excluding priming 43.79 Sqm

coat) on previously printed steel and other

metal surface with synthetic enamel paint,

brushing to give an even shade

including cleaning the surface of all dirt,

dust and other foreign matter.

88 500 Extra over Above item for 86 & 87 for 43.47 Sqm

every sub sequent coat of paint.

89 500 Painting two coats (excluding priming 20.16 Sqm

coat) on external surface of new rain

water, soil, waste and vent pipes and

fittings with ready mixed bituminous

brushing, black, anti corrosive to give

an even shade including cleaning of all

dirt, dustand other foreign matter.(75 mm

90 500 Painting two coats (excluding priming 25.05 Sqm

coat) on external surface of new rain

water, soil, waste and vent pipes and

fittings with ready mixed bituminous

brushing, black, anti corrosive to give

an even shade including cleaning of all

dirt, dust and other foreign matter.(100 mm

91 500 Painting two coats (excluding priming 40.17 Sqm

coat) on new wood and wood based

surface with enamel paint, interior to

give an even shade including

cleaning the surface of all dirt, dust

and other foreign matter sand papering

and stopping. (a) Ready mixed paint

brushing wood primier pink.

92 500 Painting one coats (excluding priming 40.17 Sqm

coat) on previously painted wood and

wood based surface with enamel paint,

to give an even shade including cleaning

the of all dirt, dust and other foreign

matter.(b) Ready mixed paintbrushing

priming for enamel

93 500 Extra over Above item for 91 & 92 36.39 Sqm

every sub sequent coat of paint.

94 500 Painting two coats (excluding priming coat) 104.12 Sqm

on new wood and wood based surface with

ready mixed paint, brushing, oil, gloss, semi

gloss to give and even shade including

cleaning of all dust, dirt and other foreign

matter sand papering and stopping.

95 500 Finishing wall with weather proof exterior 113.40 Sqm

emulsion paint on wall surface (two

coats) to give an required shape even

shade after thoroughly brushing the

surface to remove all dirt, and remains

of loose powdered materials.etc

96 500 Applying two coats of putty & two coats of 40.19 Sqm

primer of approved brand and manufacture

on new wall surface to give an even shade

including thoroughly brushing the surface

free from mortar dropping and other foreign

matter and sand papered smooth.

97 500 Painting two coats (excluding priming 87.11 Sq.M.

coat) on new wood and wood based

surface with enamel paint, interior to

give an even shade including

cleaning the surface of all dirt, dust

and other foreign matter sand papering

98 10 Writing letter or figures on any 3.47 per letter

surface with black japan paint (stops, per

comas, hyphens and the like not to be Cm/Ht

measured and paid for separately)

(i) Block (Letters/Figures) (Per 10 Letter

99 5 Extra over items for using thick white 0.07 per letter

paint instead of black japan paint. per

(i)Block (Letters/Figures) Cm/Ht

100 5 Polishing with french polish on new wood 131.67 Smt

and wood based surface to give an even

surface including cleaning, the surface of all

dirt, dust and sand papering smooth and

including a coat of wood filler.

101 5 Extra over items for using thick white 0.07 per letter

paint instead of black japan paint. (ii) perCm/Ht

Indian (Letters/Figures)

102 5 Painting lines, deashes, arrows, letters 121.91 Sqm

etc on roads, Air fields and like in two coats

with road marking paint, brushing

including cleaning the surface of all dirt,

dust and other foreign matter. (i)Over

103 5 Painting lines, deashes, arrows, letters 12.14 Rmt

etc on roads, Air fields and like in two coats

with road marking paint, brushing

including cleaning the surface of all dirt,

dust and other foreign matter.(ii) Upto

104 5 Painting lines, deashes, arrows, letters etc 50.40 Sqm

on roads, Air fields and like in one coats

with road marking paint, brushing including

cleaning the surface of all dirt, dust and

other foreign matter. (i) Over 10cm in width

105 5 Painting lines, deashes, arrows, letters 5.52 Sqm

etc on roads, Air fields and like in one coats

with road marking paint, brushing

including cleaning the surface of all dirt,

dust and other foreign matter. (ii) Upto

105 A 10 Painting the kids picture chart & letter 5803.57 Wall

writting of different size and shapes as per

details/design etc.comp. as dire.by

engineer in charge

106 2 Demolition including stacking of 1047.38 Cu.M.

serviceable materilas and disposal of

unserviceable materials with all lead and

lift. (i) R.C.C. work

107 2 Demolition of Brick work and stone masonry 544.95 Cu.M.

including stacking of serviceable materil

as and disposalof unserviceable materials

with all lead and lift.(ii) In Cement Mortar.

107 A 2 Demolition of terrace including stacking of 63.00 Smt

serviceable materilas and disposal of

unserviceable materials with all lead and

lift.(i) Brick tile covering.

108 2 Dismentaling tiled of stone floors laid in 47.25 Sqm

mortar including stacking of serviceable

materil as and disposal of unserviceable

materials with all lead and lift.

109 2 Dismentaling of sheet roofing 47.25 Sqm

including ridges, Hips, Valleys, Gutters

etc. stacking of serviceable materil as

and disposal of unserviceable

materials with all lead and lift.(i) G.I.sheet

109 A 2 Dismentaling of sheet roofing 53.55 Sqm

including ridges, Hips, Valleys, Gutters

etc. stacking of serviceable materil as

and disposal of unserviceable

materials with all lead and lift.(i) A.C.

110 2 Dismentling steel work including 3.63 Kg.

distempering and stacking the

materials with all lead and lift.

111 2 Dismentling doors, windows, 185.85 Each

ventilators etc. (wood or steel) shutters

including chowkhats architraves, hold

fasts and other attachment etc.

complete and stacking the material within

all lead and lift.(i) Not exceeding 3 Sq.M. in

112 2 Dismentling doors, windows, 248.85 Each

ventilators etc. (wood or steel) shutters

including chowkhats architraves,hold

fasts and other attachment etc.

complete and stacking the material with

in all lead and lift.(ii) Exceeding 3 Sq.M.in

113 2 Dismentling barbed wire in fencing 66.15 Rmt

including making rolls and also

including dismentling fencing posts

including all earth work concrete in base

and making good the disturbed

ground stacking useful materials as

directed and disposing as directed

and disposing of the unserviceable

materials with all lead and lift.

114 2 Dismentling C.I. pipes G.S.W. pipes 74.03 Rmt

abd A.C. rain water pipes with fittings

and clamps including stacking the

materials with all lead and lift (for any dia, of

115 2 Dismantling santtary fittings like wash 401.63 Each

basin . W.C. pan Indian and Europe an

type, flushing tank etc. including

stacking the materials with all lead and lift

116 2 Scraping oil paint from steel and other 48.83 Smt

metal surface and making the surface

even (with Hand Scraping.)

117 2 Removing and scraping of old 19.38 Smt

deteriorated plaster of any

thickness from wall / R.C.C member

including stacking of serviceable

material and disposal of unserviceable

from site of work with all lead and lift

118 2 Providing and fixing M.S. fan clamps 168.53 Each

of shape and size as specified in

existing R.C.C. slab including cutting

chase and making good.

119 2 Cutting out cracks of roof terrace to V- 64.58 Rmt

section, cleaning out, wetting, grouting

with cement and sand slurry 1:3 (1-

cement 3-sand ) (upto 10 ton)

120 2 Cutting out cracks roof terrace to V- 75.29 Rmt

Section cleaning out and filling solidly

with a hot mixture of bitumen and

clean dry sand (1:1 by weight) (up to

121 2 Providing & Fixing in position 2900.00 Sq. M.

Alluminium doors with frame using

approved quality anodised

extruded alluminium section as

approved by Engg.in charge(Jindal

alluminium)(a) Frame sections

101.6x44.45 mm (b) Shutter bottom

vertical & top section 83.5x44.45

(wt.1.31 kg/mt.)(at 1.31 kg/mt) (c) Shutter

bottom section at 114.3x44.45 mm at (1.37

kg/mt) Shutter middle section at 100x44.3

wt.(1.37 kg/mt) incl.providing & installing

5 mm thick approved color Acrylic

sheet of standard quality fixed with

glazing chips on upper pannel &

Laminated sheet on lower pannel

(wtt.0.13 kg/Rmt) etc.comp.as direction

of engg.in charge.(N.S.)

122 2 Providing & Fixing in position Fully Panelled 4583.00 Sq.M.

/ Partly Panelled Partly Glazed / Fully

Glazed Alluminium doors with frame

using approved quality anodised

extruded alluminium section of 1.5 mm

thickness as approved by Engg. In

charge.(Jindal alluminium )(a) Frame

sections 101.6x44.45 mm b) Shutter

vertical & top section 83.5x44.45

Shutter bottom section at 114.3 x44.45mm

at ( 1.37 kg/mt ) Shutter middle section

at 100x44.3 wt. (1.37 kg/mt ) incl.

providing & installing 5 mm thick Glass

of standaed quality fixed / 12 mm

thick Laminated sheet with glazing chips

(wt. 0.13 kg/ Rmt) in panels etc. comp.

as per Detail Given & direction of

engg.in charge.

123 2 Providing & Fixing in position 4518.00 Sq. M.

Alluminium window 2/3/4 track sliding

/ fix type with frame using approved

anodised extruded alluminium section of

minium thickness of 1.5 mm as approved by

Engg. In charge.(Jindal

alluminium) units equivalent.

including P/F installing 5 mm thick

clear/tinted Glass of standard quality

124 2 Providing and fixing standared extruded of 1815.14 Sq. M.

alluminium section of size 63.50 x 38.10 x

1.95 mm,@ Wt 1.094Kg / Rmt with colour

Powder Coated alluminium frame with

mm thick transparent bronze colour tinted

float glass as details etc complete for Fix

125 2 Providing and fixing of Ridge 458.85 Sqm

flashing for roof panel shall be made

out of 0.5 mm thick pre coated GI

sheet. The Pre coatedsheet shall be of

minimum 240 mpa steel grade

confirming to IS 14246:1995 and shall

have zinc coating of minimum 120 gsm

as per IS:277:1992, 5-7 microns

epoxy primer on both side of the sheet

and polyester top coat 15-18 micron. The

PP GI Sheet shall have plastic

protective guard film of minimum

microns to avoid scratches during

transportation. The ridge shall be fixed to

the steel members by poprivetor self

drilling/self stitching fastners @

maximum 450mm c/c along length of

capping/flashing etc complete .

126 2 Supplying and fixing vinyl flooring over 963.00 Smt

the surface having 1-2 mm thickness

as per directed by engineer

incharge etc as completed (N.S.)

127 2 Providing and laying 15mm 2690.00 Smt

bamboza wooden flooring as per

architect's drawing with all

necessary details as directed by the

project consultants. Use underlay for

better result as per Detail specifications

and directed by the project consultants.

(N.S.) Approved Rate )

128 50 Providing and fixing 1.20 Metre high 385.40 Rmt

fencing with 2.0 Metre long M.S. Angle

posts 40 mm x 40 mm x 6 mm and oil

painting 3 coats fixed at 2.5 Mt, C/c.

with five Horizontan lines and two

diagonals of galvanised steel barbed

wire weighting 9.38 Kg. per 100 Metre,

strained and fixed to posts with G.I,

staples including fixing the posts in

ground with 0.5 M x 0.5.M x 0.5 M. block

in C.C 1:5:10 etc complete.

129 2 Dismentling barbed wire in fencing 66.15 Rmt.

including making rolls and also including

dismentling fencing posts including all earth

work concrete in base and making good the

disturbed ground stacking useful materials

as directed and disposing as directed and

disposing of the unserviceable materials

with all lead and lift.

130 4 Constructing a sink (chowkedi) with 2235.66 Rmt

C.C. 1:2:4, 12 cm. thick over B.B.

masonry in C.M, (1:6) in front and dwarf

wall 1.0 Mt. high and 23 cm. thick

cement plaster to masonry / in C.M.1:3)

and cement concrete flooring in 1:2:4:

mix 5cm.dia.drain pipe etc.complete.

131 4 Constructing a cooking platform 60 cm. 933.98 Rmt

width and 70 cm high resting on B.B.

Masonry walls 23 cm. thick in C.M. (1:6)

with (i) Fixing or precast R.C.C. 1:2:4)

8 cm. thick slab with marble chips set in

C.M. (1:6) (6 mm thick terrazo) with

plastering on exposed faces walls in C.M.

(1:4) etc complete.

132 1 Making 15 mm groove in RCC work on road 30.00 Rmt

and filling it with polysulfied selant and

finished it good incl. all all labour charges

etc. comp as directed

133 2 P/A Tremix with dewartering 54.00 Sq.M.

machine and floater machine on

constructed CC work for finishing the

surface as per requirement. The rate

including all machinaries, labor,

loading, unloading, transportaion etc

complete as per direction given by

engineer incharge.

134 4 Carring out timber treatment to all wood 54.98 Smt

work including drilling holes and spraying

oil based chemical solution on surface of

timber work for termite control including

labour and material etc. complete. Using

Chlordene 20 EC. As Per

6113_part III Consentration Weight1.00

percent is recommended one litre chemical

emulsion dillute with 9 liter of

kerosene precent concentration.

Total dillute concrentration will be

10 litre inclusive of the litre

chemical emulsion appication 0.75 /

Litre chemical per one Sqmt printed two

coat wood surface.

135 4 Applying general insecticide pest control 88.40 Smt

treatment to floors, cup boards etc

including labour material etc.

complete. Using Heptachloride 20 EC.

As Per 6113_pests Consentration

Weight 0.50 percentis recommended one

litre chemical emulsion dillute with 39 liter

of water will give. Total dillute

concrentration will be 40 litre inclusive of

one litre chemical emulsion appication

0.5 Litre chemical / Sqm of surface

is recommended as per I.S

136 2 Carring out plinth treatment to post 104.90 Smt

construction / existing structure by spraying

chemical solution for termite control

treatment including labour and material

consist ment with I.S. specification.

Using Chlordene and Chior purfiles

EC. As Per 6131_paret-II

Consentration Weight on percentis

recommended i.e one litre 20 EC

chemical emulsion with 19 liter give

1% concrentration inclusive of one litre

chemical emulsion appication attherate

of 5 Litre chemical / Sqm of surface

is recommended as per I.S

137 2 Carrying out wall treatment for termite 37.34 Smt

control including spraying with chemical

solution in oil base (0.5 Lit./Sq.M.)

including labour and material Using

Hepachlor concentration 20 EC. As

Per IS.6316_paret-II Consentration by

Weight 0.50 percentis

recommended i.e one litre

chemical emulsion dillute with 39 liter go

fIS concrentration total dillite

concentration will be 40 litre inclusive of

one litre chemical emulsion appication

at the rate of 7.5 Litre chemical / Sqm of

surface is recommended as per I.S

138 1000 Providing erecting and fixing double 3.91 Litre

coated Syntex PVC.(ISI) water tank of

required capacity each with all necessary

fittings and connection etc. complete

139 Providing and fixing to wall, ceiling and

floor galvanised Mild steel tubes

(Medium grade) of the following

nominal bore, tube fitting and clamps

including making good the wall ceiling and

10 (A) 15mm (upto 10 ton) 23001AA 244.13 Rmt

10 (B) 20mm (upto 10 ton) 23001BA 297.25 Rmt

5 (C) 25mm (upto 10 ton) 23001CA 393.93 Rmt

5 (D) 32mm (upto 10 ton) 23001DA 491.51 Rmt

5 (E) 40mm (upto 10 ton) 23001EA 596.73 Rmt

5 (F) 50mm (upto 10 ton) 23001FA 779.60 Rmt

140 Providing and laying in trenches

galvanised mild steel tubes (Midium

grade) of the following nominal bore,

and tube fitting (Earth work in

trenches to be measured and paid for

5 (A) 15mm (upto 10 ton) 23002AA 150.91 Rmt

5 (B) 20mm (upto 10 ton) 23002BA 190.97 Rmt

5 (C) 25mm (upto 10 ton) 23002CA 279.39 Rmt

2 (D) 40mm (upto 10 ton) 23002DA 421.12 Rmt

2 (E) 65mm (upto 10 ton) 23002EA 716.66 Rmt

2 (H) 80mm (upto 10 ton) 23002HA 910.69 Rmt

141 1 Making connection of galvanised Mild 600.08 Each

steel distribution branch with galvanised

mild steel main 50 mm to 80 mm

nominal bore by providing and fixing

tee including cutting and threading the

pipes complete.

142 Providing and fixing to wall ceiling and floor

6.0 Kg.F/Cm2 working pressure

poluthene pipes of the following out

side Dia. Low densidy, complete

with special falnge compression type

fittings,wall clips etc.including making

good the wall ceiling and floor.

143 Providing and fixing to wall ceiling and

floor 10.0Kg.F/Cm2 working pressure

polythene pipes of the following out

side Dia. Low densidy, complete

with special falnge compression type

fittings, wall clips etc. including making

good the wall ceiling and floor.

144 10 Providing and fixing cast iron (Spun) 600.08 Each

Nahni trap of the following nominal

diameter of self cleaning design with C.I.

screaed down or higned grating

including cost of cutting and making good

the walls and floor 100 mm inlet and 50 mm

outlet.(C)100mm dia.

145 20 Providing and fixing water closet 926.10 Each

squatting Pan (Indian type

W.C.Pan) size 580 mm (Earth work,

bed concrete, foot rest and trap to be

measured and paid for separately) (A)

Vitreous China. (I)Long pattern = White

146 10 Provdg. & fixing wall mounted White 4250.00 No.

/ Color Vitreous China European

water closet with integral P trap

of "Cera" - Clair Series or equivalent

incl. seat cover , Chair Bracket etc.

complete as per direction of engg. In

147 20 Providing and fixing wsh down water 1290.80 Each

closet (Europe an type, W.C.Pan) with

integral P or S trap including jointing the

trap with soil pipe in Cement

Mortar1:1 (1- Cement:1-fine sand)

(Seal and cover to be measured and paid

forseparately) (A) vitreous China

Pattern :(i) in white colour

148 10 Providing and fixing Urinal of approved 1535.63 No.

quality including connection with trap and

with integral longitudinal flush pipe.(A)

Squating plate pattern white earthenware

149 10 Providing & Fixing Angle cock of " Ess 403.39 No.

Ess" - Trend series or equivalent

standard make as approved by engg.

in charge all complete. (N.S.)

149 A 10 Providing & Fixing pillar cock of " Ess 641.53 No.

Ess" - Trend series or equivalent

standard make as approved by engg.

in charge all complete. (N.S.)

150 10 Providing and fixing 100 mm size P or 311.85 Each

S trap for water closet squatting pan

including jointing the trap with the pan

and soil pipe in cement Mortar1:1 (1-

Cement : 1-Fine sand)(A) Vitreous

China.Pattern in white colour

151 20 Providing and fixing washbasin with single 1400.18 Each

hole for pillar tap with C.I. or M.S. brackets

painted white including sutting holes and

making good the same but excluding

fittings.(A) Vitreous China:(ii) Flat Back

washbasin 550 mm x v 400mm size. (i) In

152 20 Providing and fixing Kitchen sink with C.I. 2257.69 Each

or M.S. brackets, painted white including

cutting holes in walls and making good

the same but excluding fittings. ©

Vitreous China Sink. (i) 600 mm x 450 mmx

153 10 Providing and fixing 600 mm x 450 mm 825.48 Each

bevelled edge mirrror of superior

glass mounted on 6 mm thick A.C. sheet

or ply wood sheet and fixing to wooden

pluge with C.P. brass screws and washers.

154 Providing and fixing chromium plated brass

halftrun flush cock of approved quality

including fixing in pipe line etc. complete.(ii)

155 10 Provdg. & fixing White / Color 2950.00 No.

Vitreous china Counter wash basin with

signle hole for pillar tap of "Cera " -

Concord series of 550 x425 mm size to

be fiited in stone counter with necessary

brackets painted white incl. cutting

holes and making good the same .Cost

Includes P/F C.P. brass waste

coupline, 32 mm dia fisher union ,15 mm

dia. Pillar cock & Angle cock of " Ess

Ess"- Trend series ,32 mm dia. Waste

pipe etc. complete as per dir. of engg.

156 500 Finishing wall with water proofing cement 56.87 Smt

paint of on wall surfaces (Two coats) to give

an approved brand and manufacture and of

required shape even shade after thoroughly

brushing the surface to remove all dirt and

remains of loose powered materials.

156 a 500 Extra over Item 156 for every subsequent 31.82 Smt

coat of water proofing cement paint of

approved brand and manufacture.

157 2 Providing & Fixing S.S.304 Grade Sink 4650.00 No.

of Nirali / Krishna or Equivalent

Make for Kitchen Platform of size :

24":x18" as per Direction of engg. In

157A 2 Providing and fixing Kitchen sink with C.I. or 2257.69 Each

M.S. brackets, painted white including

cutting holes in walls and making good the

same but excluding fittings. (C) Vitreous

China Sink.(i) 600mm x 450mm x 150mm

158 2 Providing and fixing C.P. brass towel 597.22 Each

rail comlete with C.P.brass brackets

fixed to wooden plugs with C.P. brass

scews.(B) 600mm x 20mm size.

159 2 Providing and fixing 600 mmx120 mm 561.03 Each

glass shelf with C.P. brass bracket and

guard rail complete mixed to wooden

plug with C.P.brass screws.

160 2 Providing and fixing toilet paper holder. 414.53 Each

161 2 Providing and fixingof S.S. Railing pipe 50 1004.24 Rmt

mm x 16 G ASIS 304 Grade as per

instruction of engineer in charge.

162 Providing and fixing screw down bib taps

of following size. (B) Brass chromium plated

screws down Bib Tap.

10 (i) 15mm dia. 23028A1 184.98 Each

10 (ii) 20mm dia. 23028A2 212.68 Each

163 Providing and fixing screw down bib taps

of following size. © Gun metal screw

10 (i) 15mm dia. 23028C1 157.29 Each

10 (ii) 20mm dia. 23028C2 176.09 Each

164 Providing and fixing pillar tap, capstan

head, screw down high pressure with

screws, shanks and back nuts.

10 (i) 15mm dia. 23029A 305.67 Each

10 (ii) 20mm dia. 23029B 351.18 Each

165 Providing and fixing Gun metal check

or non-return fullway wheel valve.

10 (i) 15mm dia. 23028A1 184.98 Each

10 (ii) 20mm dia. 23031B 201.80 Each

10 (III) 25 MM DIA 23031C 416.47 Each

10 (E) 40mm dia 23031E 656.86 Each

165 A 10 Providing and fixing brass screw down stop 203.79 Each

tap.(A) 15 mm dia 23030A

B 10 20 MM DIA 23030B 221.59 Each

C 10 25 MM DIA 23030C 218.63 Each

166 Providing and fixing chromium plated

brass half trun flush cock of approved

quality including fixing in pipe line etc.

10 (i) 20mm dia. 23032A 252.26 Each

10 (ii) 25mm dia. 23032B 261.16 Each

10 (iii) 32mm dia. 23032C 273.03 Each

167 10 Providing and fixing Urinal or 1026.01 Each

approved quality including

conecting the Urinal with waste pipe

tap etc.complete. (A) White earthen ware

flat back or corner type size 430mm x

168 10 Providing and fixing Urinal of 1535.63 Each

approved quality including

connection with trap and with integral

longitudinal flush pipe. (A) Squating

plate pattern white earthen ware

169 10 Providing and fixing chromium plated, 292.87 Each

bottle trap with necessary couplings of

approved quality for wash basin.

170 10 Providing and fixing ball cock 131.57 Each

ofapproved quality as directed. (A)

Copper Metal (i) 25mm dia.

171 10 Providing and fixing ball cock 187.96 Each

ofapproved quality as directed. (A)

Copper Metal (i) 50 mm dia.

172 10 Filling with good Quality thor as and 3850.00 Cmt

where directed by the Architect /

Engineer-in-charge, in sunk in layers of

cm. thickness, including watering,

ramming well etc. complete, as directed

by the Architect / Engineer-in-charge .

173 20 Providing laying and jointing in true line and 71.93 Rmt

level 15 mm dia. U.P.V.C. Pipe (SCH-40)

for cold water including fittings make

PRINCE/ SUPREME/ ASTRAL/ FINOLEX

or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every

two metre C/C or shall be concelled

as directed including necessary fittings

etc. including testing of pipe and joints and

fixing the same with solvent, including

cost of all materials.adhesive

174 20 Providing laying and jointing in true line and 90.93 Rmt

level 25 mm dia. U.P.V.C. Pipe (SCH-40)

for cold water including fittings make

PRINCE/ SUPREME/ ASTRAL/ FINOLEX

orequivalent as approved by

Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every

two metre C/C or shall be concelled

as directed including necessary fittings

etc. including testing of pipe and joints and

fixing the same with adhesive solvent,

including cost of all materials.

175 20 Providing laying and jointing in true line and 117.97 Rmt

level 32 mm dia. U.P.V.C. Pipe (SCH-40)

for cold water including fittings make

PRINCE/ SUPREME/ ASTRAL/ FINOLEX

or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every

two metre C/C or shall be concelled

as directed including necessary fittings

etc. including testing of pipe and joints and

fixing the same with adhesive solvent,

including cost of all materials.

176 2 Providing laying and jointing in true line and 146.65 Rmt

level 40 mm dia. U.P.V.C. Pipe (SCH-40)

for cold water including fittings make

PRINCE/ SUPREME/ ASTRAL/ FINOLEX

or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every

two metre C/C or shall be concelled

as directed including necessary fittings

etc. including testing of pipe and joints and

fixing the same with adhesive solvent,

including cost of all materials.

a 20 Providing laying and jointing in true line and 193.73 Rmt

level 50 mm dia. U.P.V.C. Pipe (SCH-40)

for cold water including fittings make

PRINCE/ SUPREME/ ASTRAL/ FINOLEX

or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every

two metre C/C or shall be concelled

as directed including necessary fittings

etc. including testing of pipe and joints and

fixing the same with adhesive solvent,

including cost of all materials.

177 5 Providing and fixing premoulded 788.78 Smt

compressible filler board in black colour

confirming to MoRT&H Specifications

(Clause 1015), having minimum density

95kg/cum. non-staining with less than 1%

water absorption & compression recovery of

93% minimum as per specification for

mm wide expansion joint including cutting

to required size and shape at all levels

etc.complete as directed.

178 5 Fixing sun film for protection sunlight in 402.54 Smt

black or any colour as as directd by

engineer In Charge.(Market rate)

179 60 Providing & Fixing 3 mm thick 1930.00 SqM

F.R.P.sheet of Approved Quality & Color /

Pattern as per Consultant's design also

includes required fabrication structure in

the grid of 2'-0x2'-0 size using hollow

pipe of16 gauge & size 2"x1" & 1"x1"

,G.I. & Bitumen Washers, Silicon paste

application for fixing the sheet . Rate

also includesnecessary bending, cutting,

labor charges , Zinc Primer coat & Two

coats of oil painting of color as approved

by consultants & making good the wall.

180 10 Providing 2 mm thick F.R.P. Gutter with 400.00 Rmt

necessary M.S. Supporting Brackets.

181 10 Hiring charges for J.C.B.machine 600.00 Hrs.

inclduing cost of fuel, operator, dirver

etc.. ( 12 hours sift day/night)

182 5 To provide tractor with hydraulic trolley, 3000.00 No.

driver, 4 Nos. of Labor with all tools like

bucket drum, showels, trikam,

pavadas, etc,, to carryout different

works during monsoon for 12 Hrs. Shift.

Work shall be carried out as per the

instrucitons of Engineer In-Charge.No extra

charged shall be paid for night shift.

183 2 Roller Blind Providing and fixing Roller 3285.00 Smt

Blind curtain fixed on window level

on wooden batten and curtain lift with

cotton thin rope, make of aerolax

or equivalent design and colour as per

instruction by engineer – in – Charge

with necessary hardware fitting, material

and labour etc complete.

184 5 Providing & Fixing Door closer - complete of 474.58 No.

Approved make to wooden / Aluminium

Doors as per direction of engg. In charge.

185 5 Providing and fixiing M.S. Fan clamps type 124.74 No.

1 of 16 mm dia M.S. bar bent to shape with

hooked ends of R.C.C. slabs during laying

incl. painting the exposed protion of loops,

all as per standard design complete.

186 5 Providing cement vata (10cm. x 10 cm. 23.45 Rmt

size) quarter round in cement mortar 1:1

including neat cement finishing, watering

187 2 Making Water connection from exi.Muni. 250.00 No.

Water line (N.S.)

188 4 Applying and providing Expansion joint 4724.75 Smt

sealing System on 100 mm vide joint

including cleaning of exansion joint by

mechanical means provision ofadhesive

and flexible membrane with required bond

length as per menufracturer specification

and 4mm thick alluminium strip covering

with one side sloted and bolted with

suitable system, inclusive of all manpower,

machinery and material as per specification

and as directed.

189 4 Providing and Fixing 1 H.P. Electrical 6800.00 Set

monoblock or submarcible water pumps

withmotor and required cable and switch

board of approved brand and make

etc.comp.as directed.

190 a 100 .Providing TMT Bar FE 415 reinforcement 66.59 Kg.

for R.C.C. work including bending, binding

and placing in position complete up to floor

two level (up to 10 ton)

b 100 ProvidingTMTBarFE500/500Dreinforcement 75.46 Kg.

for R.C.C.workincluding bending,binding

and placing in position complete upto floor

two level placing in position complete upto

floor two level placing in position complete

upto floor two level(upto 10 ton)

191 20 Providing and fixing 30mm thick solid both 2214.00 Smt

side prelam PVC door shutter (sintex door-

equivalent) with necessary alluminium fitting

with EL-7 section frame

192 2 Providing & Fixing in position Alluminium 2350.00 Sq. M.

window sliding / fix type with frame using

approved anodised extruded alluminium

section as approved by Engg. In

charge.(Jindal alluminium) units equivalent

(a) Frame sections 65 x 25 mm ( at

kg/mt) (b)Sliding Frame bottom section of

Shutter top & bottom section 40 x18 mm (

wt. 0.41 Kg/Rmt ) (d) Shutter interlock

vertical section 10 x 18 mm.( 0.41 Kg/ Rmt)

(e) Shutter vertical of 40 x 18 mm. (0.41

Kg/Rmt) including P/F installing 5 mm thick

approved color Acrylic sheet of standard

quality etc.comp.

193 20 Providing and laying polished granite stone 2690.00 Smt

slab 18 mm thick in risers of steps, dedo

and pllars laid on 10 mm thick cement

mortar 1:3 (1 cement:3 coarse sand) and

jointed with gray cement slurry including

rubbing & polishing etc.complete.

194 4 Wall panelling with 12 mm MDF fixed to 1688.00 Smt

existing alluminium framing and making

grove as per design and finished with

royal plastic paint as per instruction of

engineer incharge. (N.S.)

195 10 Providing and laying 15mm 2690.00 Smt

bamboza wooden flooring as per

architect's drawing with all

necessary details as directed by the

project consultants. Use underlay for

better result as per Detail specifications

and directed by the project consultants.

(N.S.) (Approved Rate )

196 10 Providing 20 mm thick double coat mala 269.78 Sq.M.

cement plaster on interior brick / concrete

work for plastering comprising of base coat

of 12 mm thick cement plaster in cement

mortar (1 Cement : 4 coarse sand) in rough

finishing and 8 mm thick top coat of cement

mortar 1:2 (1 Cement : 2 Coarse sand)

finished with trovel including scaffolding

curing etc. complete.

197 500 Finishing wall with weather proof exterior 113.40 Sq.M.

emulsion paint on wall surface (two coats)

to give an required shape evenshade after

thoroughly brushing the surface to remove

all dirt, and remains of loose powdered

materials.etc complete

198 2 High Back Chairs for vip Lounge 6750.00 Each

:Supplying and installation of

“Revolving High Back” chairs. The chairs

must be robust, ergonomically

designed and comfortable. Seat

& Back Assembly -1.2 cm thick

hot pressed plywood and upholstered with

Fabric and Molded Polyurethane

Foam with PVC lining all around.

Back foam is designed with contoured

lumber support for extra comfort. Chairs

Dimension - Width 55 cm, Depth 60 cm

Height 103 – 115.5 cm, Seat Height(SH)

44 – 56.5 cm. The Polyurethane foam

should be molded with density 45+/-2

kg/m3 & Hardness = 16+/-2

kg/m3onHampden machine at 25%

compression. Arm Rest - One-piece

Black integral skin polyurethane with

50-70 shore. `D’ Type Handle and

reinforced with MS insert. Centre

Pivot Mechanism - 360o revolving type

17o maximum tilt on pivot at centre Tilt

tension adjustment. Upright locking.

Telescopic Bellow Assembly - The

bellow should be 3 piece telescopic type

and injection molded in black

Polypropylene. Hydraulic Height Adjustment

- The Hydraulic height adjustment should

be provided with adjustment stroke of at

least 10cms. Pedestal Assembly - The

pedestal should be injection molded

in Black powder coated MS on and

fitted with 5 nos. twin wheel castors.

Twin wheel castors - The twin wheel

castors should be injection molded in

Black Nylon The complete item as

per architect /engineer in charge

199 2 Providing and supplying Medium Back 5500.00 Each

Chair for Control room MODEL LIKE

HOF OCT 172 Revolving synchro

tilting mechanism based chair with gas lift

for adjustable height and medium

curved back with seat and back PU molded

cushion with MS pipe frame structure

and white foam layer for seat and molded

PU foam. White foam layer for back

covered with thick cloth and draped

with cloth of approved shade. (min. of

Rs.150/meter). 5 legged revolving

molded nylon chair base with good quality

of PU castors with 2 years replacement

guarantee. The chair to have wide

polyurethane arm rest of approved shape.

Complete chair should be in suitable

shape. Rates to be inclusive of all

taxes and free delivery at site. The

complete item as per architect /engineer

200 5 Providing and fixing storage, entire unit to 12500.00 Smt

be made from 19 mm th. and 12mm Ply

with 1.0mm &. 8 mm th. Laminate.

Shelves to be made from 19mm Ply

with both side laminate. Rate shall

include necessary approved mortise

locking systems, S S Handle pair 2" to

4" height and necessary hardware.

Over all storage to be completed with

necessary hard ware and accessories

completed as per drawing and design

as given by Architect.

201 1 Existing storage repairing and veneer 7500.00 Smt

on top Providing and fixing of Louvers On

Existing d.c panel Providing and fixing

35mmthk. Louvers shutter made up

from Ghanateak frame with 135x75mm

and shutter frame as per detail and fixing

aluminum louvers which is

specified readymade powder

coated aluminum grill panel louvers .and

applying melamine spray polish all exposed

wood work. Overall door to be

completed with necessary hardware

and accessories completed as per

drawing and design as given by

Engineer In charge/Architect.

202A 1 Providing and fixing flush door 4686.36 Smt

shutters, solid core construction with

frame of first class hardwood with cross

board and face veneer or plywood face

panels, with both side 1 mm laminate

finishing including anodized aluminum

butt hinges with necessary screws.

Decorative type and pine wood core

anodized minimum 3 no 150 mm long

aluminum butt hinges in flush door

shutters with 2 no of brass holdfast

mm long 1 no brass tower bolt 250 mm

long and two no of 150 mm long brass

door handle . Decorative both side

laminated Flush door 35 mm thick. with

frame of 10 cm x 7 cmt Indian teak

wood frame including all necessary

fitting fixtures hardware screw and

adhesive etc fixing up to all lead and lift

height up to 45 mtr from GL etc complete as

per direction of engineer in charge

B 1 Providing and fixing 35mm thick factory 2131.00 Smt

made moulded door shuter consisting of

solid core single leaf flush door of 30mm

thickness, lipped with 15mm (5mm x 3)

thick x 30mm width on one stiles and top

rail and 10mm (5mm x 2) thick x 30mm

width on the other stilesand bottom rails.

The inner panel laminated with 2mm thick

termite proof, water proof and fire resistant

moulded PVC sheet with 2,4,6 raised panel

design in different plain and /or prelim

colours on one side after routing the

moulded design on flush door and 2mm

plain and/or prelim PVC sheet on other side

using rubber adhesive on flush door and

solvent cement adhesive on the PVC liping

etc. complete as per direction of Engineer

in charge, manufacture’s specification and

203 10 P/M/F chainlink jali 8'x4' size as per details 1230.00 Rmt

sketch & instructionof engineer in charge

same as lal darwaja garden pattern

consisting of 3'dia. M.S black pipe 'A' class

5'4" ht. fixed at 8'9" c/c in C.C 1:2:4 block of

9"x9"x9" size chain link jali of size 2"x2"x10

gauge fixed in 35x35x5 mm MS angle

frame 8'x4' size with MS flat of size 25x3

mm welded jali etc.comp.The jali is to be

welded to MS pipe with MS flat as

instruction given.The M.S pipe and the M.S

angle frame are to be painted one coat of

primer and two coats of paint as directed in

line and level. (N.S)

204 Providing & Fixing masonary wall with

porbandar lachiya stone with well dressed

grooveas per directed by engg.in charge for

foundation, plinth or super structure level

(above plinth level upto floor two level) in

cement mortar 1:5 (1-cement : 5-fine sand)

incl.pointing the joint with white cement and

yellow oxide powder in proportion to match

stone colour the joints should be thread

grooved as per exi. lake stone pitching

1 (A) stone masonary wall/stone dressed 8990.00 Cmt

single faced (size 15"x8"x9")

1 (B) stone coping (size 15"x8"x4") 510.00 Rmt

1 (C) stone coping (size 15"x8"x9") 790.00 Rmt

1 (D) stone column (size 15"x15") 10710.00 Cmt

1 (E) stone column top (size 20"x20"x9") 685.00 No.

205 30 Supplying and fixing of 300 mm-L x 150 393.00 Rmt

mm-B x 380 mm-H Kerb block for

Footpath in M-20 grade using 20 mm

nominal size black trap aggregate of

Sevaliya/Timbaor equivalent quality

for pre-cast blocks,

reasonablyexposed finish/

formwork , mould with well

equippedwith vibratory system for kerb

stones of approved design including

curing, etc. complete, including thecost

of formwork etc. complete. The rate

shall also include necessary cutting

of asphalt, fixing the Kerbstones in line

and level on 5 cm thick sand bedding

withnecessary equipments and materials.

The rate shall also include the flush

pointing in CM (1:3) for all joints of

thekerbstones. Filling of zari alone the

sides of the kerbstone fixed with

Bituminous concrete

Bituminousconcrete / C.C. mixed in

proper position to flush withthe road

surface as directed by Engineer in

change to form a portable mixture.a)

Laying on 5 cm thick Sand Bedding

b 30 Providing and fixing pre-cast concrete kerb 376.43 Rmt

stone of gray cement based concrete block

30cm length,30cm height and 15cm thick of

M200 grade concret as per approved

design and including excavation for fixing in

proper line and level,filling the joint with C:M

1:3 (1cement:3fine sand) etc complete.

206 30 Providing and Laying of Rubber Moulded 501.60 Smt

Paver Block Grey/Coloured 60 mm thick, M-

35 Grade of any size shape (Usually Uni-

Paver Blocks) using black trap good quality

aggragate of 20 mm nominal size for

footpath,parking areas, service lanes and

other areas as mentioned in the drawing /

instruction of engineer in charge. Cost

includes formworks using rubber mould,

Rate providing and laying paver blocks as

per required grading and specification. The

paver block shall be mechanically

compacted. The work of paving blocks shall

be executed in line and level by skill mason

of flooring work only. It should be laid in

such a way that the no cutting of the paver

block to be necessary. if cutting of paver

block necessary then it should be cut by

machine only and carting. The finished

surface of the paver block shall have

resonably good, plain finished. Paver

blocks shall be compacted and shall be

relaid if necessary. Gravel or such type of

materials shall not be allowed for

production. Laying on 5 cms thick sand

207 2 Provoding and fixing flush door shutters, 1779.97 Smt

solid core construction with frame of first

class hard wood with cross board and face

veneer or ply wood face panels, including

anodised alluminium butt hinges with

necessary screws. (B) Non- decorative type

and block board core anodised alluminium

butt hinges in flush door shutters (2) 35 mm

thick. Labour work for fixing any kind of

paving with cement pointing in CM 1:2,

including watering, ramming etc comp. as

dir.For pavement

208 5 I) Laying on Sand bedding as per 68.64 Smt

requirement to fix the C.C.Block / Nibhada

Stone in Line & Level

209 Box type metal letters forming composite

box made from 1mm thick stainless steel

plate of grade 304 having brush finish of

following font size to be fixed at Main Gate

in english and or Gujrati and including fixing

charges approved before fixing by clent /

A 2 400mm high 1000.00 Nos.

B 2 300 mm high 750.00 Nos.

C 2 230 mm high 565.00 Nos.

210 2 Providing and fixing false ceiling at all 850.00 Smt

height including providing and fixing of

frame work made of special sections, power

pressed from M.S. sheets and galvanized

with zinc coating of 120 gms/sqm (both side

inclusive) as per IS : 277 and consisting of

angle cleats of size 25 mm wide x 1.6 mm

thick with flanges of 27 mm and 37mm, at

1200 mm centre to centre, one flange fixed

to the ceiling with dash fastener 12.5 mm

dia x 50mm long with 6mm dia bolts, other

flange of cleat fixed to the angle hangers of

25x10x0.50 mm of required length with nuts

& bolts of required size and other end of

angle hanger fixed with intermediate G.I.

channels 45x15x0.9 mm running at the

spacing of 1200 mm centre to centre, to

which the ceiling section 0.5 mm thick

bottom wedge of 80 mm with tapered

flanges of 26 mm each having lips of

mm, at 450 mm centre to centre, shall be

fixed in a direction perpendicular to G.I.

intermediate channel with connecting clips

made out of 2.64 mm dia x 230 mm long

G.I. wire at every junction, including fixing

perimeter channels 0.5 mm thick 27 mm

high having flanges of 20 mm and 30 mm

long, the perimeter of ceiling fixed to

wall/partition with the help of rawl plugs at

450 mm centre, with 25mm long dry wall

screws @ 230 mm interval, including fixing

of gypsum board to ceiling section and

perimeter channel with the help of dry wall

screws of size 3.5 x 25 mm at 230 mm c/c,

including jointing and finishing to a flush

finish of tapered and square edges of the

board with recomme-nded jointing

compound , jointing tapes , finishing with

jointing compound in 3 layers covering upto

150 mm on both sides of joint and two

coats of primer suitable for board, all as per

manufacturer’s specification and also

including the cost of making openings for

light fittings, grills, diffusers, cutouts made

with frame of perimeter channels suitably

fixed, all complete as per drawings,

specification and direction of the Engineer

in Charge but excluding the cost of painting.

211 1 Providing and fixing wall acoustical 4160.00 Sq.mt.

paneling using ecotone Slato/ Anutone

slato or equivalent Acoustic Panel make

Slats L-16 of size 128mmx2430mmx16mm

thick up to 2400mm high as per the

following specification :-Slats L-16- 2mm

@16mm, 32 x 128 x 2430 mm high grade

Pine wood base Medium Density Fiber

acoustic boards with Tongue & Groove

Edge,2mm slot perforation @ 16mm centre,

slates perforations, The acoustic should be

furnished with a Black absorbent felt

backing with an airflow resistance of 330-

460 Ns/m³ (DIN 53887),wood practical

core,NRC : should be Up to 0.75,should

meet the safety requirements of EN

Fixing :- Sound Strut CC18 screw fixed

horizontal/vertical to wall at every 600mm

c/c. Metal cleat can be fixed on top edges

of Sound Strut CS55 fixed directly by

stamping to the CS55 and IC91 which is

screw fixed directly to the wall where ever

required with a backing black color fabric as

approved by Architect and as specified

including all accessories, material & labor

complete as directed by Architect /

212 1 Providing & Fixing SPEED BUMP - #2 No 2185.00 Rmt.

(1 black, 1 yellow) 350 x 500 x 50 mm, Size

per color End Cape 350 MM x 175 MM x

MM TOP DESIGN - Lining Top flat ANTI

SKID PATTERN FOR GRIP COLOUR :-

YELLOW & BLACK BODY MATERIAL :-

MODIFIED THERMOPLASTICS (Polymer

Rubberized ) • ECO FRIENDLY

RECYCLE RUBBER Packing :- 4 pcs/

woven Bag Load Capacity :- 20 MT Fitting (

Fixing on TRAKE) :-4 holes & END CAPE :-

2 HOLE HEX Bolts with Washer Epoxy for

Bolt Fitting etc. complete as directed by EIC

213 1 Providing & Fixing in position 24 MM 2619.00 Sq.mt.

exposed grid suspension system with “P “

Grid profile false ceiling system using

MM X 600 MM ecotone/anutone or

equivalent make Glass Fiber Ceiling Tiles

having tegular edges & 0.90 NRC value

and approved surface design (with NRC of

0.90) and edge profile Tegular placed in a

suspended grid of size 600 MM X 600 MM

made from hot dipped GI Steel sections,

rotary stitched, main tee of size 24 X 42 X

3000 MM X 0.40 MM thickness suspended

at every 600 MM c/c along length of ceiling

with 4 MM dia, Pre-straightened G.I.Wire

with necessary level adjusters &

intermediate cross tees of size 24 X 38 X

600 MM X 0.40 MM thickness shall be

inserted in to slots between the main tees

at 600 MM centers in direction vertical to

the main tees, where in the main tees are

resting on the periphery on wall angles of

size 24 MM X 24 MM X 3000 MM X

MM thickness including providing necessary

openings for light fixtures, diffusers etc.

214 1 Providing and fixing of Roller blind 2610.00 Smt

curtain/blackout. The fabric shall be woven

from formulated platisol extruded over a

polyaster yarn.The fabric shouldl be

weaved to provide subtle view of the side of

the blind and should offer elimination of

glare and sunlight radiance upto a minimum

of 80%.The fabric shall be flame retardant.

215 1 Providing and applying Texture Paint 425.00 Sq.m

(Rustic Finish) on external plastered

surfaces, pattern as per sample approved

by the Architect. including preparing

surface, using roller to get approved

texturised surface. Job to include making

required surface preparation, to receive

Texture paint finish etc. All complete as per

detail drawing, as specified and as directed

by Architect / Consultant / Project - In -

Charge. The rates shall be inclusive of

Scaffolding, all material, labour etc.

complete. as directed by EIC.

216 2 Providing and fixing PVC/Gpsysum plain 766.00 Smt

colour false ceiling with grid type with

aluminium frame from gypsteel, fastners

,props, Finishing as per architectural

drawing allowing openings for

A.C. Diffusers, Light/Electrical Points

etc –complete, Prior to fixing on

frame.(Brand : Anutone or

equivalent ) (N.S.) or as directd by engineer

217 2 Provdg. & laying S.W. Gully trap with brick 1279.40 No.

masonry chamber & water tight G.T.Stone

including fixing of covervSquare mouth trap

100 mm x100 mm size P-Trap

218 2 Providing cement vata (10cmx10cmsize) 23.45 Rmt.

quarter roundin cement mortar 1:1 including

neat cement finishing, waterin getc.

219 2 Providing and laying (to level or slopes) and 211.05 Rmt.

jointing with stiff mixture of Cement Mortar

in proportion 1:1 Salt glazed stoneware

pipes including testing of pipes and joints

complete.(A) 100mm dia.

220 2 Providing and laying (to level or slopes) and 288.23 Rmt.

jointing with stiff mixture of Cement Mortar

in proportion 1:1 Salt glazed stoneware

pipes including testing of pipes and joints

complete.(B) 150mm dia.

221 2 Constructing brick masonry chamber for 2903.89 Each

underground C.I. Inspection chamber and

bends with bricks having crushing strength

not less than 35Kg/Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame

15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-

cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and

bed concrete etc. complete.(i) Inside

dimensions 455mmx 610mm and 450mm

deep for single pipe line.

222 2 Constructing brick masonry chamber for 3624.51 Each

underground C.I. Inspection chamber and

bends with bricks having crushing strength

not less than 35Kg/Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame

15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-

cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and

bed concrete etc. complete.(i)Inside

dimensions 500mm x 700 mm and 450mm

deep for pipe line

with one or two inlets.

222A 1 Constructing brick masonry chamber for 7109.35 Each

underground C.I. Inspection chamber and

bends with bricks having crushing strength

not less than 35Kg/ Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame

15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-

cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and

bed concrete etc. complete.(iii) Inside

dimensions 600mm x 850 mm and 450mm

deep for pipe lines with three or more inlets.

223 5 Providing, supplying and fixing precast C.C. 219.00 Rmt.

blocks (M-20) edge kerb having size of

x 300 x 300 mm depth and as per design

conveying it to the site, jointing into C:M 1:3

and racking out the joints incl. necessary

excavation of asphalt, soil etc..completed.

224a 2 Constructing a cooking Sandwich platform 933.98 Rmt.

60 cm. width and 70 cm high resting on

B.B.Masonry walls 23 cm.thick in C.M.(1:6)

with (ii) Fixing black Granitee 30mm thick

laid on precast R.C.C. (1:2:4) slab with

plastering on exposed faces of wall in C.M.

(1:4) etc complete.

224b 2 Constructing a cooking platform 60 cm. 1132.43 Rmt

width and 70 cm high resting on

B.B.Masonry walls 23 cm.thick in C.M.(1:6)

with (ii) Fixing black kadappa stone 30mm

thick laid on precast R.C.C. (1:2:4)slab with

plastering on exposed faces of wall in C.M.

(1:4) etc complete.

225 5 Providing and fixing hard drawn steel wire 754.65 Smt

fabric 75mm x 25mm mesh or weight not

less than 7.75 kg. per Sq.M. to window

frames etc. including60 x 20mm beading of

226 5 Providing & fixing 15 cm wide chicken mesh 35.00 Rmt.

jali with nails & then application of 15 mm

plaster on R.C.C.& masonary joints as per

dir.of engg.in charge

227 5 Providing and laying cement concrete 348.08 Smt.

flooring 1:2:4 (1-cement : 2-coarse sand : 4-

graded stone aggregate 20mm nominal

size) laid in one layer and finished with a

floating coat of neat cement. (A) 50mm

228 500 Providing and constructing, Underground 6.50 Litre

(U/G) water tank of specified capacity, on

specified location, for all depths, in

controlled CC of M-200 grade with bottom

slab, top slab and RCC walls, including cost

of form work and reinforcement,with inside

and outside plaster in CM 1 :3 and water

proofing treatment as per IWP

specification,including injection, grouting,

etc. complete. The rate includes for

providing and fixing two nos. 0.6m. x 0.6 m.

size medium duty CI manhole cover/s at

top, including wash out pipe line and inlet

and outlet connections etc. complete.

229 2 Providing & Fixing of Armstrong Mineral 1307.00 Smt

Fibre Acoustical Suspended Ceiling System

with Dune (Bevelled Tegular) Edge Tiles

With Armstrong 15mm Exposed GRID. The

tiles should have Humidity Resistance (RH)

of 99%, NRC 0.5, Light Reflectance ≥85%,

Thermal Conductivity k = 0.052 - 0.057 w/m

K, Colour White, Fire Performance UK

Class 0 / Class 1 (BS 476 pt - 6 &7) in

module size of 600 x 600 x 15mm , suitable

for Green Building application, with

Recycled content of 32%. The tile shall be

laid on Armstrong Silhouette profile grid

system with 15mm white flanges

incorporating a 6mm central reveal in

white/black colour and with a web height of

45mm and a load carrying capacity of

minimum 15.68 Kgs/M2 & minimum pull out

strength of 100 Kgs.. Silhouette, Main

Runners & Cross Tees to have mitred ends

& “birdsmouth” notches to provide mitred

cruciform junctions. The T Sections have a

Galvanizing of 90 grams per M2 and need

to be installed with Suspension system of

Armstrong make. Warranty Certificate and

Test Reports for NRC, CAC and Fire rating

shall be provided by Vendor.

Mineral Fibre Acoustic Modular Ceiling Tile

should be GREENPRO certified and

qualifies as GREEN PRODUCT certified by

CII Green Products and Services

Council.INSTALLATION: To comprise main

runner spaced at 1200mm centres securely

fixed to the structural soffit using Armstrong

suspension system (specifications below) at

1200mm maximum centre. The First/Last

Armstrong suspension system at the end of

each main runner should not be greater

than 450mm from the adjacent wall. Flush

fitting 1200mm long cross tees to be

interlocked between main runners at

600mm centre to form 1200 x 600 mm

module. Cut cross tees longer than 600mm

require independent support. 600 x 600mm

module to be formed by fitting 600mm long

flush fitting cross tees centrally between the

1200 mm cross tees.Perimeter trim to be

Armstrong wall angles of size

3000x19x19mm, secured to walls at

mm maximum centres. Installation should

be carried out as per Armstrong

recommended procedure.ARMSTRONG

SUSPENSION SYSTEM accessories

manufactured and supplied by Armstrong

World Industries consisting of M6 Anchor

Fasteners with Vertical Hangers made of

Galvanised steel of size 26 x 26 x 25 x

1.2mm with a Galvanised Thickness of

80gsm, A pre Straightened Hanger wire of

dia – 2.5 mm of 1.8 m length., thickness of

80gsm and a tensile strength of 344-413

MPa, along with Adjustable hook clips of

0.8mm thick, galvanised spring steel for

2.68 mm with a minimum pull strength of

110 kg. The adjustable clip also consists of

a 3.5 mm aquiline wire to be used with the

230 2 Providing and fixing PVC Printed pain 766.00 Smt

colour false ceiling with grid type with

alluminium frame consisting of 600mm x

600mm 3mm thick plain PVC sheet used as

panel insert in a frame work made using

anodized alluminium T section of size 1 x

(235 x 25mm, 19 gauge or 1 mm thick) in

square pattern of grid sizes of 2 x 2 (600 x

600mm) The alluminium frame work is

supported from the cceiling with the help of

G.I. hook and G.I. wire/6mm M.S. rods of

required sizes to maintain proper level etc.

The aluminium frame work is supported on

side wall with the use of alluminium L

section of size 1 x1 (25 x 25mm) angles etc.

complete as per direction of Engineer in

charge. Manufactures specification and

231 2 Providing and supplying of labour for 551.00 No

necessary manual excavation, cleaning,

Shifting of Material Or any other, or for any

other work as directed by Engineer In

charge. The Rate includes Handcart with

A 2 Carpenter L007 725.00 No

B 2 Fitter/Plumber/Mason L025 697.00 No

C 2 WELDER/ Gas cutter at Day /night L030 689.00 No

D 2 Supplting of welding machine / gas cutter 1500.00 No

including cost of welding rods/gas,

Transportation, including carting from site to

E 5 Mazdoor at Day Male/Female 493.00 No's

232 50 Conveyance charges of (A) 326.73 Cmt

limemurrumbuilding rubbish earth manure

or sludge & execavated rock andrubbish

[Limemurrum building rubbish

233 2 Supplying electric breaker machine for RCC 1071.42 Shift

slab or asphalt demolishing work on site by

using operator, fuel, power supply

etc.complete as directed. (no payment

should be allowed for non working condition

of machinery and for pipe line excavation

and M.H. work. Allowed only for break down

work) (Based on Previously approved rate

234 2 CatchPit Jali Fixing P/F FRC catch pit jali 1383.92 No.

with frame 600mm x 600mm clear opening

etc. comp. As directed by engineer in

charge. (Based on Central Store Rate)

235 Providing and fixing concealed center point

to wall ceiling & floor CPVC (SDR 13.5)

PIPE having National Sanitation Foundation

(NSF) seal for potable water of following

dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and

floor etc. complete.

A 2 15 MM DIA 23055 165.21 Rmt

B 2 20 MM DIA 23056 202.97 Rmt

C 2 25 MM DIA 23057 247.25 Rmt

D 2 32 MM DIA 23058 330.36 Rmt

E 2 40 MM DIA 23059 437.66 Rmt

F 2 50 MM DIA 23059 647.30 Rmt

236 1 Providing and fixing cast iron steps of size 162.23 Each

500mm x 150mm x 22.5mm and painting

with two coats of Anti-corrosive paint etc.

237 1 Supplying and fixing C.I. cover 300mm x 491.80 Each

300mm without frame for Gulley trap

(Standard pattern) te weight of cover to be

not less 4.53 Kg.)

238 Providing and fixing to wall ceiling and

floor 10.0Kg.F/Cm2 working pressure

polythene pipes of the following out

side Dia. Low densidy, complete

with special falnge compression type

fittings, wall clips etc. including making

good the wall ceiling and floor.

239 2 Providing and fixing sheet glass, selected 1176.10 Smt

quality (Type-C) bedded in putty and fixed

with wooden beading including the cost of

wooden beadings of first class teakwood

and necessary cutting of glass. (2) 6 mm

240 2 Providing and fixing rough cast wired glass, 559.26 Smt

6mm thick bedded in putty and fixed with

wooden beading including the cost of

wooden beadings of Indian teak wood and

necessary cutting of glass. (C) Wired -

241 2 Providing and fixing five courses water 466.84 Smt

profing treatment with bitumen felt

consisting of second and fourth course of

blown / bitumen or/ and residual bitumen

applied hot at 1.2 kg.per Sq.M.of area for

each course and first course with fibre base

bitunen saturated under lay type land third

course with fibre base self finished felt type

2 grade 1 and fifth and final course of stone

grit 6mm and down size or pea sizes gravel

spread at 0.008 Cu. Metre / Sq. metre

including preparation of surface excluding

grading complete.

242 2 Providing and fixing three courses water 753.20 Smt

profing treatment of Astral Make Company.

with an first layer of first course with fibre

base, Second Course of Water Proofing

chemical coat, and Third Coat of Fibre Coat

with fibre base self finished felt type 2 grade

1 and final course of Burshing with

chemical Treatment with a thickness of 1 to

2 mm thickness, including preparation of

surface , The Said work should be provided

for a perfomance bond of 5 Years for

warranty purpose.

243 1 Constructing Manhole with R.C.C. top slab 10920.76 Each

in 1:2:4 mix (1-cement :2-coarse sand : 4-

graded stone aggregate 20mm nominal

size) foundation concrete1:3:6 mix (1-

cement : 3- coarse sand :6-Brick bats 40 +

50mm size) inside plastering 15mm thick

with Cement Mortar 1:3 (1-Cement : 3-

coarse sand) finished with a floating coat of

neat cement and making channels in

cement concrete 1:2:4 mix (1- Cement :2-

Coarse sand :4-stone aggregate 20mm

nominal size) finished smooth complete

including curing and festing (i) Inside size

900mm x 1200mm and 1.5M. deep

including C.I. cover with frame size 560mm

diameter total weight of cover and frame to

be not less than 128 kgs. (Wt. of cover

Kg. and Wt. of frame 64 Kg.)(A) With

230mm thick walls of brick msonry using

brick having crushing strength not less than

35Kg. / Sq.cm. in Cement Mortar 1:5 (1-

Cement: 5-Coarse sand) (1) A type depth

0.90 Metre for 150mm diameter sewer.

244 2 Providing and fixing of wall paper at 140.00 Sq.Ft

Wall/Ceiling/ or at other places, as required.

( Basic Rate of Wall paper must be (100-

120) Rs. Per Sq.Ft. The Rate includes of

necessary material, with fixing and

transporation with necessary solution.

245 1 Providing and fixing of Shower of jaquar 3802.00 No's

make for Serial No. 0797N ALD ( High Flow

C/Body-Jaquar, Primary Batch )

246 2 Providing and fixing of Metro Pole of 40 mm 4062.00 No's

dia of Jaquar Make of series FLV-1093 N (

Serial No. 10935 )

247 2 Providing and fixing of chair bracket for 2225.00 No's

Support of W.C. of Primary batch Series-

7324 of Jaquar make

248 1 Providing and fixing of upper part of W/C of 2378.00 No's

jaquar series of

249 1 Providing and fixing of 2 in 1 Bib cock of 2889.00 No's

jaquar Series of KUP-35041 (8481) as per

Instructions of engineer in charge.

250 1 Providing and fixing of Pillar cock of jaquar 4043.00 No's

make series EXTND 190 MM as per

instructions of engineer in charge.

251 1 Providing and fixing of Angle cock of jaquar 1870.00 No's

make series of KUP-35053 PM

252 1 Providing and fixing of shower of size 8x8m 7851.00 No's

including shower arm, flange, floor trape,

including all material with fixing as per

Instructions of engineer in charge.

253 2 Supplying and fixing of Roller blind curtain 6670.00 Smt

In Patterned Fabric of Different Textures

corded in roller blinds with stiching fittings

and of stichles pattern. The Price Rate

Includes necessary Making with fixing of

roller blind with roller mechanism as

instruction and selection of design as per

engineer in charge.

254 2 Supplying and fixing of Sheer Curtains of 1955.00 Smt

Different Size, In Patterned Fabric of White

Colour Textures stiching fittings and of

stichless pattern. The Price Rate Includes

necessary Making with fixing of Sheer

Curtain with top channels of fixing as

instruction of engineer in charge.

255 8 Supplying and providing of Green Curtain 1162.00 Smt

for prevention of Sunlight. The Price Rate

Includes blackout curtains with dense or

fabirc or foam interlining material. The Price

Rate also Includes necessary fixing with

roller tie ropes at site at any height as per

instruction of engineer in charge.