RE-ETENDER FOR MATERIAL SUPPLY FOR WARD 7 ANGANWADI CONSTRUCTION UNDER MGNREGS SCHEME

Amount

MATERIAL SUPPLY

StoneAggregate(single size):40mm nominal size

StoneAggregate(single size):20mm nominal size

Coarse Sand (Zone III)

Portland Cement

Stone for masonry work

Through and bond stone size 24 x24 x39 cm

Structural steel such as tees , angles , channels and R s joists

Red oxide Zinc chromate primer

Second Class kali wood in planks

Second Class kali wood in Scantling

Hollock ballies 125 mm diameter

Stone Aggregate (single size) : 10mm nominal size

Solid block of size 30*20*20 cm

Hollow bloks of size40*20*10 cm

Twisted steel / deformed bars

Anjili wood scantls

Pincoda wood scantls

Bright finished or black enameled mild steel butt hinges 100 x 58 x 1.90 mm

Bright finished or black enameled mild steel butt hinges 50 x 37 x 1.50 mm

Bright finished or black enameled mild steel screws 40mm

Bright finished or black enameled mild steel screws 20mm

Anjili wood planks

Hollock wood in planks

Float glass sheet of nominal thickness 4 mm ( weight not less than 10 kg/aqm)

Mild Steel round bar above 12 mm dia

Flats up to 10 mm in thickness

Rawl plug 50 mm (designation 10 nos)

35mm thick factory made soild panel PVC door shutter of single piece extructed Profile non decorative finished ( Matt finished )

Powder coated M S butt hinges 100mm x 58 mm x 1.9 mm

Fine sand (Zone IV)

200 mm Aluminum aldrop

Iron hooks@eyes 100mm

Vitrified floor tile 60 x60 c m

Ceramic glazed Tiles list quality 300*300 mm in all shades and designs of White,Ivory grey, Fume Red brown etc..

Ceramic glazed Tiles list quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black

Precast chequered cement tiles 22mm thick Dark shade using ordinary cement

Water thinnable cement primer for interior

Plastic emulsion paint

Synthetic enamel paint in black or chocolate shade

Viterous china flat back wash basin 550*400 mm

15mm C. P brass tap

C.P brass waste 32mm

C. I. bracket for wash basin and sinks

Stainless steel kitchen sink -without drain board 470*420mm bowl depth 178 mm

Vitreous China Orissa type w. c.pan size 580 mm

Flushing Cistern P.V.C.10 Its capacity (low level)(white)(with fittings.accessories and flush pipe)

100 mm S.C.I trap with vent heel

PTMT –Towel Rail(600mm)

Secod class teak wood in scantling

Cromium Plated Brass screws 25 mm

Brass bib -cocki15 mm dia

Poleythylene water storage tank with cover and suitable licking arrangement

PVC pipe 110 mm outer dia 6kgf/cm2

PVC Reducer 110*75 mm dia

PVC Tee 110*110*110 mm dia

PVC door Elbow 110mm dia

PVC Elbow 110mm dia

PVC bend 110mm dia

PVC Reducer 75*63mm dia

PVC vent cowl 63mm dia

PVC Pipe 50 mm outer dia 6kgf/cm2

Mild Steel tubes hot finished welded type

RENNY KURIEN (BID ID -2212068)