COMPREHENSIVE REPAIR TO FLOORING, PLASTERING, TILING, BRICK WORK, PLINTH PROTECTION AND MISC B/R WORKS IN ZONE- E AGE B/R-I AT CLEMENT TOWN

Amount

Demolition of cement concrete (unreinforced) above ground floors and paving exc. 15cm thickness (below or above ground level).

M&L 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

M&L 75mm thick PCC (1:2:4) type B2 (Using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M & L rubber mouuded coloured glossy finished cement concrete Chequered tiles of size 30 cm x 30 cm x 20mm thick jointed in neat cement slurry and pointed in white or coloured cement and pigment to match the surface of tile as in floor over and including 15mm thick screed bed in Cement mortar (1:6), complete all as specified and directed.

M&L polished rubber moulded coloured machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming IS 15658-2006 of 60mm thickness, M-35 grade laid over and incl 25mm thick sand cushioning complete all as specified and directed.

M&L cement concrete 1:3:6 type C-1 (using 40mm graded aggregate) 75 mm thick as in plinth protection/hard standing surface finished even and smooth without using extra cement complete all as specified and directed by Engineer in Charge .

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone agg) as in Foundation, filling and mass concrete complete all as specified and directed.

M & L Cement concrete type B2, 1:2:4 (40MM graded aggregate for surface channels and drains complete all as specified.

Providing, cement concrete type B0 1:2:4 (12.5mm aggregate), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles andthroating, as directed and as specified.

Demolition of brick work or stone masonry/stone slabs built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed.

M&L Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified.

M&L Reinforced concrete pipes, class 150 NP3, laid and jointed complete with collars all as specified and directed.

M&L Concrete bed in PCC 1:4:8 (D-2) to 150mm NP3 drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; complete all as specified and directed.

Taking down cement plaster, from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing unserviceable material,outside of A 1 defence land complete all as specified and directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete walls internal surfaces in CM 1:6 finished to even & fair without using extra cement.Complete all as specified and directed by Engineer in Charge .

M&L for rendering 15 mm thick in CM 1:4 on other than fair faces of brick or concrete surfaces finishing even and smooth without using extra cement complete all as specified and as directed .

M&L for rendering 15 mm thick in CM 1:3 on other than fair faces of brick or concrete surfaces and mixed with polyester triangular fibres as secondary reinforcement as per manufacture instruction finishing even and smooth without using extra cement complete all as specified and as directed . Note. polyster triangular fibre should be paid seperately.

Supply only polyester triangular fibres (recron) as secondary reinforcement in all types ofconcrete and mortars

M&L rendering 5 mm thick in CM 1:3 in ceiling / Chhajja's finished even and smooth (without using extra cement). Complete all as specified and directed

M&L for preparation of newly plastered surface of internal wall by application of wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying two coats of acrylic distemper over a coat of primer using roller all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge.

M&L for two coats of cement based paint over a coat of cement wash to newly plastered surfaces including preparation of surfaces complete all as specified and directed.

M&L for white washing three coats on wall incl preparation of newly plastered surfaces.complete all as specified and directed by Engr In Charge.

M&L for white washing three coats on ceiling incl preparation of newly plastered surfaces.complete all as specified and directed by Engr In Charge.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises from MoD all as specified and directed.

M&L for joint free Non- skid coloured ceramic tiles of any design and pattern, 7 to 8 mm thick (square/rectangular) area of each tile exe 0.11 sqm but not exe 0.18, in floor etc incl 15mm thick screed bed in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles complete all as specified and directed.

M&L for joint free coloured glazed ceramic tiles of any design and pattern, 300x450x 7 to 8 mm thick, as in dado etc incl 10 mm thick rendering in CM 1:3, Set and jointed in neat cement slurry and pointed in white of coloured cement to match the shade of the tiles complete all as specified and directed.

Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) not exceeding 1.5 Sq.m each.Complete all as specified and directed

Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) exe 1.5 Sqm but not exceeding 4.0 Sq.m each.Complete all as specified and directed

Taking down door shutters of size exc 1 Sqm and n exc 2 sqm removing from site complete all as specified and directed.

M&L Solid (100mm x63 mm single rebate) factory made 100% solid WPC brown door frame made from 100% LEAD FREE (Single extruded process) material with density 780 kg/ Cum & manufactured by an ISO: 9001-2015 certified company, all as per specification drawings as directed by Engg-in-Charge. The door frame should be Water Proof, termite proof, fire retardant and having excellent screw holding capacity nd shall be fixed with 6 Nos 150mm long hole fasternerscomplete all as specified and directed.

M&L Solid (125mm x63 mm Double Rebate) factory made 100% solid WPC brown door frame made from 100% LEAD FREE (Single extruded process) material with density 780 kg/ Cum & manufactured by an ISO: 9001-2015 certified company, all as per specification drawings as directed by Engg-in-Charge. The door frame should be Water Proof, termite proof, fire retardant and having excellent screw holding capacity and shall be fixed with 6 Nos 150mm long hole fasterners complete all as specified and directed.

M&L 30mm thick moulded plain WPC solid door shutter: providing (30mm thick) MOLDED WPC Brown Factory made 100% solid door (Conforming As per IS: 4020) made from 100% LEAD FREE single extruded with 2,4 or 6 raised panel design on the front side with 10mm deep mould on single side with wood grain texture and back side plain with density not less than 600kg/Cum. Manufactured by an ISO: 9001-2015 certified company. The door should be water Water Proof, termite proof, fire retardant and having excellent screw holding capacity complete all as specified and directed.

Providing & fixing of windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished item of work including of all taxes complete all as specified and directed.

S&F SS butt hinges 100mm long medium weight cold rolled mild steel complete all as specified and directed.

S&F stainless steel tower bolt 150mm long of extruded section complete all as specified and directed.

S&F stainless steel bow handle "D" type anodized 100mm long complete all as specified and directed.

S&F aluminum anodized sliding door bolt 250mm long with hasp and staples (bolt type) and fixing clips of sheet cast of extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed.

S & F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/springs clips complete all as specified and directed.

S&F for Glazing with plain sheet glass, ordinary quality, 3 mm thick and glazing with oil putty or aluminium or PVC beading in squares not exceeding 0.5 Sq.m in each pane.Complete all as specified and directed

S&F for Glazing with frosted sheet glass, ordinary quality, 3 mm thick and glazing with oil putty or aluminium or PVC beading in squares not exceeding 0.5 Sq.m in each pane.Complete all as specified and directed

S&F in repair for Stainless steel curtain rod, 25mm dia with fixing brackets and decorative type knobs both side of each rod ,incl taking down old curtain rod or pelmet boxes..Complete all as specified and directed by Engineer in Charge .

S&F in repair MS helical door spring fixed in iron/wooden surface 300mm long including roller and roller plate complete all as specified and directed.

S&F in repairs door stopper aluminium anodized white dale 40mmx40mm and 2mm thick dia 150mm having rubber bush 25mm dia long (high) fixed to door shutter with steel screw complete all as specified.

Taking up or down steel water tubing and connections including cleaning for refixing or removing to store 15 mm dia .complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removing to store 20 mm dia .complete all as specified and directed.

Cutting chases, pinning in brick walls, making good to facing where required and pointing in Cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water pipe etc and making good, cutting not exc 10cm width or girth complete all as specified and directed

Refixing old steel tubing of 15 mm bore medium grade, to walls and ceilings or laying in floors complete all as specified and directed

Refixing old steel tubing of 20 mm bore medium grade, to walls and ceilings or laying in floors complete all as specified and directed

S& F for GI tubing 15mm bore, medium grade ISI marked with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions, including short lengths etc.) ( heavy grade ISI Marked) , fixed to walls, concealed in wall and ceiling or laid in floor complete complete all as specified and directed.

S& F for GI tubing 20 mm bore, medium grade ISI marked with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions, including short lengths etc.) ( heavy grade ISI Marked) , fixed to walls, concealed in wall and ceiling or laid in floor complete complete all as specified and directed.

Cleaning and remoiving all scale dirt, etc, from tanks of Exc 250 & n exc 500 Ltr Capacity and from mouths of circulating pipes , etc. complete all as specified and directed. NOTE-: Quoted rates includes disconnecting tank from outlet and float ball valve and refixing same after cleaning for SR No 52 to 53.

All as item no 53 but Exc 500 & n exc 1000 Ltr capacity of tank complete all as specified and directed.

S&F in repairs PVC water storage tank cylindrical,triple layer vertical with closed top with threaded cover hoisted and fixed in position tank capacity 500 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminum rod and high density plastic ball screwed for 20mm bore of iron pipe and making connection for inlet and outlet and 20mm tank nipple (min weight 45gm) suitable for HDPE water tank including dismantle of old water tank and removing from site. complete all as specified and directed.

All as item no 55 but 1000 Ltr capacity of tank complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) Soil, waste and vent pipes, ( ISI Marked), single socketed in any length with rubber ring joints laid in trenches or in floors/walls.complete all as specified and directed.

S & F in repair 75 mm bore PVC (SWR) Soil, waste and vent pipes ( ISI Marked), single socketed in any length with rubber ring joints laid in trenches or in floors.complete all as specified and directed.

S & F in repair 75 mm bore PVC (SWR) Multi floor trap including jointing with solvent cement ( ISI Marked) . complete all as specified and directed.

S&F in repair PVC bend any radius 110mm bore with access door complete all as specified and directed.

S&Fin repair PVC bend any radius 75mm bore with access door complete all as specified and directed.

S&F in repairs Vitreous china Squatting pan (Ist quality) , 'Orissa pattern, white, with integral foot rest excluding flushing cistern and flush pipe including connection to trap, to flushing pipe, anti-syphonage pipe, etc complete including making good to floor complete all as specified and directed

S&F in repairs PVC valveless, syphonic action type flushing cistern (Dual action ISI Marked), low level , white, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern for 10 litres capacity of approved make .Complete all as specified and directed

S&F in repairs Vitreous China wash basin, white, flat back, size 550x450mm excluding taps, waste, chain and plug and porcelain stopper but including waste coupling of PTMT (min weight 32mm-45gms cutting for pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan pedestal pattern white (excluding fixing bolts, flushing cistern and flush pipe) including connection to trap, to flushing pipe, anti-syphonage pipe, etc complete complete all as specified and directed.

S & F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections fixed in position complete in all respect as specified and directed.

S&F in repairs angle stop valve cast copper alloy screwed down high presure screwed both end for iron pipe 15 mm dia fancy type cromium plated (ISI Marked) complete all as specified and directed.

S & F in repairs stop valve cast copper alloy screwed down high presure (concealed type) screwed both end for iron pipe 15 mm dia fancy type cromium plated. complete all as specified and directed.

S&F in repair brass CP bib tap 15mm bore fancy type screwed for iron pipe complete with wall flange complete all as specified and directed.

All as per item No 69 here-in-before but long body type complete all as specified and directed.

S&F in repair brass CP Pillar Tap 15mm bore cast copper alloy with capastan head fancy type screwed for iron pipe complete with wall flange complete all as specified and directed.

S & F in repair CP shower rose with or without swivel joints of 125 mm size with shower arm including fixing to steel pipe or union complete all as specified and directed

S&F in repair CP Grating doom 125mm dia with/without waste hole of steel fixed on floor/nahani trap with cement mortar, complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nut at both ends with washer, 450mm long and fixed complete all as specified and directed.

S & F cast copper alloy, chromium plated Towel Rail 20 mm dia, D-type, 600 mm long fixed with and including Chromimum plated brass screws and wooden plastic cleats Complete all as specified and directed .

S&F in repair SS soap dish fixed to wall with screw complete all as specified and directed.

S & F in repair 20 mm dia brass forged ball gate Valve with Iron flange head Screwed both ends for Iron Pipe and fixed in repairs (ISI Marked ) Complete all as specified and directed

Preparation of old painted steel surfaces of any description over 10 cm in width or girth applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for old plastered or unplastered surafces with complete removal of existing treatment of walls and applying one coat of white wash complete all as specified and directed.

M&L for old plastered or unplastered surafces with complete removal of existing treatment of walls/in any and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation of old surface on ceiling including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots making the surface even and smooth and applying one coat of white wash on old decorated surfaces complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old decorated distempered surfaces on internal walls including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and making the surface smooth by rubbing with sand paper and applying one coat of acrylic distemper (oil emulsion) using rollers of approved tint and make all as specified and directed by Engr-in-Charge.

All as per item No 83 above but two coats of acrylic distemper (oil emulsion) on wall surfaces complete all as specified and directed by Engr-in-Charge. Note:- Rendering/painting considered above to be executed upto three storey height of building.

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.

M/s RK ENTERPRISES

SWASTIKA BUILDERS

BHAGAT JI ENTERPRISES

RADHA ENTERPRISES

M/S VIJAY TRADERS

ABHIMANYU LAMBA

Malik Associates