Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.5 CrAccepted-AOC VILLAGE PO GOLI TEHSIL DALHOUSIE DISTT CHAMBA HP | CHAMBA | HIMACHAL PRADESH | 176207 | ₹4.5 Cr Quoted ₹4.0 Cr | L1 | Accepted-AOC AWARD LETTER |
| 2 | L2₹4.1 Cr+₹4.1 L (1.03%)Rejected-Finance | ₹4.1 Cr+₹4.1 L (1.03%) | L2 | Rejected-Finance HIGEST AMOUNT |
| 3 | L3₹4.3 Cr+₹27.3 L (6.77%)Rejected-Finance | ₹4.3 Cr+₹27.3 L (6.77%) | L3 | Rejected-Finance HIGEST AMOUNT |
| 4 | L4₹4.6 Cr+₹57.8 L (14.4%)Rejected-Finance | ₹4.6 Cr+₹57.8 L (14.4%) | L4 | Rejected-Finance HIGEST AMOUNT |
| 5 | L5₹4.7 Cr+₹63.6 L (15.8%)Rejected-Finance | ₹4.7 Cr+₹63.6 L (15.8%) | L5 | Rejected-Finance HIGEST AMOUNT |
Tender Value
₹6.2 Cr
EMD Value
₹12.4 L
Closing Date
15 Jun 2022, 5:00 pmClosed
SUPERINTENDING ENGINEEER 9TH CIRCLE NURPUR
SUPERINTENDING ENGINEEER 9TH CIRCLE NURPUR
IMPROVEMENT WIDENING AND STRENGTHING OF SADWAN TO KALESHWER RAOD KM 0.0 TO 7.00 IN DISTT KANGRA HP SUB HEAD C.O R.WALLS CROSS DRIANGES WORK GSB WBM G-II WBM GIII CC PAVEMENT TARRING WORK INTERLOCKING PAVER BLOCK ROAD SIDE DRAIN AND PARAPETS
2022_PWD_61457_1
TENDER NOTICE SEIX NO 1508-12 DATED 18.5.2022
Open Tender
Civil Works
Item Rate
540 days
KOTLA BEHAR
Please refer Tender documents.
22 documents required · 22 mandatory
₹5,000
₹12.4 L
Yes
5 Sept 2022
6 Jun 2022
16 Jun 2022
6 Jun 2022
15 Jun 2022
6 Jun 2022
Amount
Earth work in excavation for all type of road structure such as Retaining walls, Breast walls, culverts, drains and parapets etcetera in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock, chiseling/wedging out rocks (where blasting is prohibited) as per drawings and M.OR.D. technical specification section 300 and 1600 as per direction and entire satisfaction of Engineer-in-Charge, including setting out construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials up to any lead and lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm (One hundred fifty millimetre) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) up to any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per direction and entire satisfaction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated cement concrete nominal mix 1:4:8 (one cement isto four sand isto eight graded crushed stone aggregate 40mm (forty millimeter) nominal size) for plain cement concrete in all heights/depths, on ground or under water, including pumping or bailing out water/dewatering (surface and sub-soil water) and removal of the slush which may arise at the time of laying concrete, for all heights/depths and any quantum of water, including cost of form work and curing complete in all type of structures like Retaining Walls & Breast Walls etcetera complete as per drawing and MORD technical specification section 800, 900, 1200 & 1600 and as per the direction and the entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Back filling behind abutment Retaining wall/Breast wall, Wing walls and the like with approved granular materials complete as per drawings and MORD technical specification section 1200 and 1600 as directed by the Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and erecting a "W" metal beam crash barrier comprising of 3mm (Three millimetre) thick corrugated sheet metal beam rail, 70cm (Seventy millimetre) above road/ground level, fixed on ISMC series channel vertical post, 150x75x5mm (One hundred fifty into seventy five into five millimetre) spaced 2m. (Two metre) centre to centre, 1.8 m (One point eight millimetre) high, 1.1 m (One point one) metre below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150x75x5 mm (One hundred fifty into seventy five into five millimetre) , 330 mm (Three hundred thirty millimetre) long complete as per MORTH technical specification section 800 and as per the direction and the entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and laying 100mm (One Hundred millimeter) diametre PVC pipe Weep Holes in brick masonry/plain /reinforced concrete abutments, wing wall/ return wall, retaining walls and breast walls etcetra, extending through the full width of the structure with slope of 1V:20H (One vertical : twenty Horizontal) towards draining face complete as per drawing and MORD technical specification section 700 and 1200 and as per the directions and entire satisfactions of Engineer-in-Charge, including carriage of materials with in all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated concrete for plain cement concrete, M-10 Grade (M-Ten) Nominal mix 1:3:6 (one cement isto three sand isto six graded crushed stone aggregate (40mm) forty millimeters nominal size) on ground or under water in open foundations and the like for all types of structures, including pumping or bailing out water/dewatering (surface and sub-soil water) and removal of the slush which may arise at the time of laying concrete, for all heights/depths and any quantum of water, including cost of form work and curing complete as per drawing and MORD technical specification section 800, 900 and 1200 and as per the direction and the entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated concrete for plain cement concrete Grade M-15 (M-Fifteen) in sub structure Nominal mix 1:2½:5 (one cement isto two and half sand isto five graded crushed stone aggregate (40mm) forty millimeters nominal size) on ground or under water, including pumping or bailing out water/ dewatering (surface and sub-soil water) and removal of the slush which may arise at the time of laying concrete, for all heights/depths and any quantum of water in toe walls and parapets etcetera including cost of form work and curing complete as per MORD technical specification section 800, 900 and 1200 and as per the direction and the entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and laying Rubble stone flooring laid in cement mortar 1:3 (one cement isto three sand) laid over cement concrete bedding M-15 (M- fifteen) inclusive of its cost complete as per drawing and MORD technical specification section 1300 as per the direction and the entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated concrete for plain cement concrete in cradle bedding for hume pipe of plain cement concrete Nominal mix 1:2½:5 (one cement isto two and half sand isto five graded crushed stone aggregate 40mm (forty millimeter) nominal size on ground or under water, including pumping or bailing out water/ dewatering (surface and sub-soil water) and removal of the slush which may arise at the time of laying concrete, for all heights/depths including cost of form work and curing complete as per MORD technical specification section 800, 900 and 1100 as per the direction and the entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Filling in foundation trenches as per drawing and MORD technical specification clause 305.3.9 earth filling and as per the direction and the entire satisfaction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.
Providing and laying (to level or slope) 900mm dia (Nine hundred millimetre) diametre reinforced cement concrete heavy duty non pressure pipes IS Class NP-3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 (One cement isto two sand) but excluding the cost of excavation, protection works, back filling, bedding concrete and masonry work in head walls and parapets as per drawing and M.O.R.D. technical specifications section 1100 and as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Octroi, Royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Supplying fitting and placing HYSD bar reinforcement in sub structure including cutting, bending, binding and placing in position complete including the cost of binding wire complete in all respect as per drawing and MORD technical specifications section 1000 and 1200 and as per the directions and the entire satisfaction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Supplying fitting and placing HYSD bar reinforcement in super structure complete as per drawing and MORD technical specifications section 1000 and 1400 including cutting, bending, binding and placing in position complete in all respect including cost of binding wire complete as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated reinforced cement concrete in substructure Grade-M-20 (M-Twenty) Design mix with cement contents not less than 350 kgs. (three hundred fifty kilograms) per cubic meter with 20mm (Twenty millimeter) nominal size graded crushed stone aggregate in bed block, dirt wall and the like, etcetera for all heights, including cost of form work and curing complete but excluding the cost of reinforcement for R.C.C work as per MORD technical specification section 800, 900 and 1200 complete and as per the direction and the entire satisfaction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated concrete for plain cement concrete Grade-M20 (M-Twenty) in sub structure design mix with cement contents not less than 330 Kgs (Three hundred thirty kilogram) per cubic metre with 40mm (Forty millimetre) nominal size in abutments etcetera, including cost of form work and curing complete as per drawing and MORD technical specification section 800, 900 and 1200 and as per the direction and the entire satisfaction of Engineer-in-Charge, including pumping or bailing out water/dewatering (surface and sub-soil water) and removal of the slush which may arise at the time of laying concrete for all heights/depths and any quantum of water complete including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated reinforced cement concrete in superstructure Grade-M25 (M-Twenty Five) designed mix with cement contents not less than 400 kgs. (four hundred kilograms) per cubic meter with 20mm (Twenty millimeter) nominal size graded crushed stone aggregate in Deck slab, wheel guard and the like up to all heights, including cost of form work and curing complete but excluding the cost of reinforcement for Reinforced concrete work as per drawing and MORD technical specification section 800, 900 and 1400 complete and as per the direction and the entire satisfaction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated reinforced cement concrete Grade-M-30 (M-Thirty) designed mix with cement contents not less than 430kgs. (four hundred thirty kilograms) per cubic meter with 20mm (twenty millimeter) nominal size graded crushed stone aggregate in Wearing Coat including cost of reinforcement for Reinforced work form work and curing complete, as per drawing and MORD technical specification section 800, 900, 1000 and 1400 complete as per the direction and entire satisfaction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Construction of precast Reinforced cement concrete railing of M-25 (M-Twenty five) grade cast in situ with 20mm (Twenty millimetre) nominal size aggregate true to line and grade, tolerance of vertical Railing post not to exceed 1 in 500, (one in five hundred) centre to centre spacing between vertical post not to exceed 2000mm (Two thousand millimeters) leaving adequate space between vertical post for expansion, complete as per approved design, drawings including the cost of form work and reinforcement complete as per MORD technical specifications section 800, 900, 1000 and 1200 or as per direction and entire satisfaction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and fixing drainage spouts complete with 100mm (one hundred millimeter) dia galvanized mild steel down pipe, corrosion resistant structural steel grating complete as per drawing and MORD technical specifications section 1400 and as per the direction of Engineer-in- Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated reinforced cement concrete Grade-M25 (M-Twenty Five) designed mix with minimum cement contents not less than 400 kgs. (four hundred kilograms) per cubic meter with 20mm (twenty millimeter) nominal size graded crushed stone aggregate in Approach Slab with all heights, including cost of form work, reinforcement for Reinforced work and curing complete as per drawing and MORD technical specification section 800, 900, 1000 and 1400 complete as per the direction and satisfaction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated plain cement concrete M-15 (M-Fifteen) Grade design mix with cement contents not less than 275 Kg (Two hundred seventy five kilogram) per cubic metre with 40mm (Forty millimetre) nominal size in leveling Course below approach slab complete as per drawing and MORD technical specifications section 800, 900 and 1200 and as per the direction and entire satisfaction of the Engineer- in-charge including carriage of materials within all leads, lifts and other incidental. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Loosening of the ground upto a level of 300mm (three hundred millimetre) below the sub-grade level watered graded with motor grader and compacted in layers to meet the requirement of Tables 300.1 and 300.2 with three wheel 80-100 (Eighty to hundred) KN static roller for sub grade construction as per of MORD Technical Specification section 300 and as per direction and the entire satisfaction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.
Construction of sub grade and earthen Shoulder with approved materials obtained from borrow pits within all leads and lifts, transporting to site, spreading, grading to required slope and compacted with three wheel 80-100 (Eighty to one hundred) KN static road roller to meet requirement of table 300.2 as per MORD technical specification section 400 including hauling of material with in all leads, lifts and other incidentals and as per the entire satisfaction and direction of Engineer-In-Charge. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Construction of Granular sub base 150mm (one hundred fifty millimeter) compacted thickness by providing well graded material as per table 400.1 of spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with three wheel 80-100 (eighty – Hundred) kN static road roller to achieve the desired density, complete as per MORD technical specification section 400 for grading-I material and as per the direction and entire satisfaction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.
Providing, laying, spreading and compacting by mechanically means 75mm (seventy five millimeter) compacted thickness, crushed stone aggregates of Grading-II, 63mm to 45mm (sixty three millimeter to forty five millimeter) nominal size to water bound macadam specification including spreading in uniform thickness using templates, hand packing rolling with three wheeled roller 80-100 (eighty to hundred) kN static weight in stages to proper grade and camber including applying and brooming with stone screening Type-B of size 11.2mm (Eleven point two millimetre) nominal size at the rate of 0.20 (zero point two zero) cubic meter per 10 Sqm. (ten square metre) and binding material at the rate of 0.06cum (Zero point zero six cubic metre) per ten square metre to fill up the interstices of coarse aggregate, watering and compacting to the required density as per MORD Technical specification section 400 and as per direction and satisfaction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing laying, spreading and compacting by mechanically means 75mm (seventy five millimeter) compacted thickness, stone aggregates of Grading-III, 53mm to 22.4mm (fifty three to twenty two point four millimetre) size to water bound macadam specification including spreading in uniform thickness, using template, hand packing motor grader, rolling with three wheeled roller 80-100 (eighty to hundred) kN static stages to proper grade and camber including applying and brooming stone screening type-B of size 11.2mm (eleven point two millimetre) nominal size at the rate of 0.18cum (zero point one eight cubic metre) per ten square metre to fill up the interstices of coarse aggregate, watering and compacting to the required density for grading-III as per MORD Technical specification section 400 and as per entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, sale tax, GST or any other taxes imposed by the Government.
Providing and applying primer coat with bitumen emulsion (SS-I) on prepared surface of granular base including cleaning of road surface with hydraulic brooms and spraying primer with bitumen emulsion pressure distributor at the rate of 0.85 kg (zero point eight five kilogram) per square metre of road surface as per MORD Technical specification section 500 as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and applying tack coat with bitumen emulsion RS-I, including cleaning the road surface with hydraulic brooms and spraying with emulsion pressure distributor at the rate 0.275 kg (zero point two seven five kilogram) per square meter on the prepared granular surface treated with primer complete as per MORD Technical specification section 500, and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and applying tack coat with bitumen emulsion (RS-I) after and including cleaning the road surface with hydraulic brooms and spraying with emulsion pressure distributor at the rate 0.225 kg (zero point two two five kilogram) per square meter on the prepared Bituminous surface complete as per MORD Technical specification section 500 and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, sale tax, GST or any other taxes imposed by the Government.
Providing and laying 50mm (Fifty millimetre) thick bituminous macadam with hot mix plant 100-120 (One hundred to one hundred twenty) TPH providing an average output of 75 tonne (Seventy five five) per hour using crushed aggregates of grading as per Table 500.7 premixed with bituminous binder VG-10 (Viscosity grade-ten) at the rate of 3.4% (three point four percent) of mix, transported to site upto all laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per MORD Technical Specification Section 500 and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, GST, toll tax or any other taxes imposed by the Government.
Providing and laying 30mm (Thirty millimetre) compacted thickness bituminous concrete with minimum 100-120 (One hundred to one hundred twenty) TPH hot mix batch type plant with electronic control Grading-II using crushed aggregate 13.2mm (Thirteen point two millimetre) nominal size of specified grading premixed with bituminous binder VG-10 (Viscosity Grade-Ten) at the rate of 5.40 to 5.60 (Five decimal four zero to five decimal six zero) percent of mix weight and using cement as filler with quantity not less than 2% (two percent) by weight of total aggregate or as per design mix transported to site, laid with censor paver finisher hydraulic with censor control to the required grade, level and alignment over a previously prepered surface and rolling complete with smooth three wheel roller 8-10 (Eight-Ten) tonne capacity for initial break down rolling and vibratory roller 8-10 (Eight-Ten) tonne capacity or pneumatic tyre roller of 12-15 (Twelve-fifteen Tonne) with tyre pressure of atleast 0.56 MPa (Zero point five six ) for intermediate rolling and finish rolling with 6-8 (six-eight) tonne smooth wheeled tandom roller to achieve the desired compaction as per MORTH technical specification section 500 complete in all respect, lifts as per entire satisfaction and direction of Engineer-in-Charge including carriage of material within all leads,lifts and other incidental. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.
Scarifying the existing bituminous road surface by mechanical means upto any depth and disposal of scarified material within all leads and lifts as per MORD technical specification section 300 complete in all respect and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts, and other incidentals. The rate is including Octroi, Royality, Malkana, Toll tax, GST or any other taxes imposed by the Government excluding GST.
Construction of Un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 (Forty three) grade cement or any other equivalent type as per clause 1501 using M-30 (Thirty) Grade, (design mix) concrete having coarse and fine aggregates conforming to IS : 383, maximum size of coarse aggregate not exceeding 25mm, (Twenty five millimeters) mixed in a concrete mixer of not less than 0.2 (Zero point two) cubic meter capacity and appropriate weigh batcher using approved design mix, laid in approved fixed side form work (steel channel) laying and fixing of 125 (one hundred twenty five) micron thick polythene film, wedges, steel plates including levelling the form work as per drawing, spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 (Fourteen) days using curing compound (where specified) and water, finishing to lines and grade as per drawing and MORD technical specification section 1500 and as per the direction and the entire satisfactions of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and laying heavy duty precast cement concrete 80mm (Eighty millimetre) thick interlocking paver blocks vibro compacted upto M-50 (M-fifty) grade including M-30 (M-thirty) grade concrete edge block 300x300x150mm (Three hundred into three hundred into (One hundred fifty millimetre) of grey or coloured shade. Interlocking paver blocks pavement shall consists of surface layer of appropriate sized concrete paving blocks paved and compacted over 25mm (Twenty five millimetre) thick bedding sand layer of specified grading, which is spread over a properly constructed and profiled base course and is bounded by properly installed edge restraints. The joint shall be filled by fine sand of specified grading. The concrete paving block shall conform to the relevant IRC code and MORD technical specification section 1500 or as per direction of Engineer-in-Charge inluding carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated concrete for plain-cement concrete, nominal mix 1:3:6 (one cement isto three sand isto six graded crushed stone aggregate 20mm (twenty millimeters) nominal size) on ground or under water in open foundations for Drains including pumping or bailing out water/ dewatering removal of the slush which may arise at the time of laying concrete, for all heights/depths, including cost of form work complete as per drawing and MORD technical specification section 800, 900 and 1200 or as directed by Engineer-in-Charge, including carriage of materials with in all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and erecting Reinforced cement concrete mechanically mixed and vibrated grade M-15 (M-Fifteen) in 5th (Fifth) kilometer stone precast of standard design as per IRC :8 fixing in position including painting and printing etcetera as per drawing and MORD technical specification section 1700 and as directed by the Engineer-in-charge including carriage of material within all leads, lifts, and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and erecting Reinforced cement concrete mechanically mixed and vibrated grade M-15 (M-fifteen) in ordinary kilometre stone precast of standard design as per IRC :8 Fixing in position including painting and printing etcetera as per drawing andMORD technical specification section 1700 and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and erecting Reinforced cement concrete mechanically mixed and vibrated Grade M-15 (M-fifteen) in 200 mtr. (Two hundred metre) stone precast of standard design as per IRC :8 Fixing in position including painting and printing etcetera as per drawing and MORD technical specification section 1700 and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and fixing 600mm (Six hundred millimetre) equilateral triangular board of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm (One point five millimetre) thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65mm (Sixty five millimetre) width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG (Fourty seven millimetre into fourty seven millimetre into twelve standard wire gauge) sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm (Four hundred fifty into four hundred fifty into six hundred millimetre) , 600 mm (Six hundred millimetre) below ground level as per approved drawing and MORD technical specification section 1700 including painting angle iron post with primer and two coats of epoxy paint and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and fixing 600mm (Six hundred millimetre) circular of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm (One point five millimetre) thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65mm (Sixty five millimetre) width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG (Fourty seven millimetre into fourty seven millimetre into twelve standard wire gauge) sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm (Four hundred fifty into four hundred fifty into six hundred millimetre) , 600 mm (Six hundred millimetre) below ground level as per approved drawing and MORD technical specification section 1700 including painting angle iron post with primer and two coats of epoxy paint and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and erecting Direction and place indentification signs more than 0.90 sqm (Zero point nine zero square metre) of semi reflective sign boards as per IRC-67 made of 2mm (Two millimetre) thick M.S. (Mild steel) Sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70 mm (Seventy millimetre) width and required message, letters, figures with reflective tape of engineering grade as per MORD specifications of required shade and colour. Supported and welded on two nos. 47 mm x 47 mm (Fourty seven millimetre into fourty seven millimetre) of 12 SWG (twelve standard wire gauge) square tube of 3050mm (Three thousand fifty millimtre) height duly strengthened by 25 mm x 5 mm (Twenty five millimetre into five millimetre) MS flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450x450x600 mm (Four hundred fifty into four hundred fifty into six hundred millimetre) , 600 mm (Six hundred millimetre) below ground level as per approved drawing and Technical Specification Clause 1701 and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Gaurd stone on curve made of Reinforced cement concrete local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and MORD Technical Specification section 1700 and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and laying of hot applied thermoplastic compound paint 2.5mm (two point five millimeter) thick including reflectrising glass beads at the rate of 250 gms (two hundred fifty grams) per square meter area , thickness of 2.5mm (two point five millimeters) is exclusive of surface applied glass beads by road marking machine as per IRC 35. The finished surface to be level, uniform and free from streaks and holes as per MORTH technical specification section 800 and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
DEEPAK JOSHI
Arya Construction Company
Shiv Kumar Govt Contractor
Davinder kumar
rajat thakur govt contractor
M/s R.K Mahajan Govt Contractor
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .