Supply, Delivery , Installation and Commissioning of Video Analytics with Server for CC cameras under city Constituency in Nellore Municipal Corporation..

Supply and Delivery of Server Processor 1)Supported CPU Series : Latest Intel Xeon Scalable Processor 2) CPU Populated: Dual Intel Xeon Processor 16 Core, 24M Cache, 2.40 GHz Memory Supported DIMM Qty: (8)+(8) DIMM slots Memory Capacity: 4 x 32GB ECC RDIMM, Should be expandable up to 4,096GB Expansion Slots PCIe: Total 5 PCIe slots should be there on board and at least (3) PCIe slots should be x16 slots, Server must support 2 nos. Double width GPU Card. Graphic Card GPU : 2 nos. Of 16GB GDDR6 Double Width Graphic Card , Connectivity: Ethernet 2 nos. Of 1GbE ports and 1 dedicated port for IPMI Storage Connector: 10 x 3.5”/2.5” Drive Slots, Populated single 2.5” Enterprise Sata 1.92TB SSD Speed : 6Gb/s RAID: 6G SATA RAID should support 0/1/10/5 Storage NVMe Connector (M.2): Connector (M.2) 2 NVMe M.2 Slots, populated with single 1TB NVMe M.2 SSD Storage: VROC Support : Yes Graphic VGA Connector type: D-Sub 15-pin Resolution: Up to 1920x1200 Chipset: Aspeed AST2600 Input /Output USB :(2) USB3.0 ports ( @ rear)COM :(2) headers VGA :(1) D-Sub 15-pin VGA port (@ rear) RJ-45 :2 nos. Of 1GbE ports and 1 dedicated port for IPMI Others :(1) ID button TPM TPM Support :Yes System Monitoring Chipset: Aspeed AST2600 Fan :Total (5) 4-pin headers Temperature :Monitors temperature for CPU, memory & system environment Voltage :Monitors voltage for CPU, memory, chipset & power supply LED :Over temperature warning indicator / Fan & PSU fail LED indicator Others :Watchdog timer support Server Management Onboard Chipset: Onboard Aspeed AST2600 AST2600 iKVM Feature: 24-bit high quality video compression / Supports storage over IP and remote platform-flash / USB 2.0 virtual hub AST2600 IPMI Feature: IPMI 2.0 compliant baseboard management controller (BMC) / 10/100/1000 Mb/s MAC interface BIOS Brand / ROM size: AMI / 32MB Feature: Hardware Monitor / Boot from USB device/PXE via LAN/Storage / Console Redirection / User Configurable FAN PWM Duty Cycle / SMBIOS 3.0/PnP/Wake on LAN / ACPI 6.1 / ACPI sleeping states S4,S5 Physical Dimension Form Factor: 2U Rackmount with 1200W 80 Plus Platinum Redundant Power Supply Operating Environment Operating Temp. 0° C ~ 55° C (32° F~ 131° F) Non-operating Temp. - 40° C ~ 70° C (-40° F ~ 158° F) In/Non-operating Humidity 90%, non-condensing at 35° C Regulation BIS Yes QCI Yes ISO Yes (9001, 14001, 27001) EPR Yes OS License Win Server 2022 OEM License Support Warranty 3 Years Standard Warranty details should reflect on OEM website

Supply and Delivery of 4MP PTZ cameras Cameras Image sensor-1/2.8”, 4MP Low Illumination Progressive Scan CMOS Sensor, Effective Pixels-2560(H)X1440(V), Min. Illumination Color: 0.001Lux @ (F1.2, AGC ON), 0.014 Lux @ (F1.4, AGC ON), 0 Lux with IR-S/N Ratio-≥58dB (AGC OFF), IR Distance-250M, Shutter Speed,Auto, Slow Shutter, (1/5 sec ~ 1/100,000 sec Adjustable), Slow Shutter On/ Off,WDR Up to 120 dB, TWDR (Off/ Low/ Middle/ High),IR LED Control-Auto, Manual, OFF, 3D DNR-Low, MID-Low, MID, MID- HIGH, High, Day/Night ICR switch, Auto, Color, B&W, External Trigger, Defog Off, Low, Middle, High,Output-PAL/NTSC adjustable, Optical zoom-36X Optical Zoom Lens (Optional: 42X), Digital zoom 16X, Focal length4.5~162mm MVF Lens, Video Compression H.265/H.264/MJPEG, H.265 Encoding,Main Profile, Streaming Capability-Quad Streams, Resolution-4MP/2MP/720P/VGA, Streams,"Mainstream: 5MP(2560X1920)@20fps / 4MP(2560x1440)@25/30fps / 1080P(1920x1080)@60fps ,Sub Stream: 720P(1280x720)@25/30fps ,Third Stream: VGA(640x480)@15fps ,Fourth Stream: VGA(640x480)@15fps " Frame Rate-1~ 30fps, Color Mode-Normal, Bright, Nature, AUDIOCompression-G.711U/A,Audio Bit Rate-8 – 64 Kbps, Color Mode-Normal, Bright, Nature, PTZ Function-Pan/Tilt range Pan: 0° ~ 360° endless; Tilt: 185° (-5° ~ 180°), Manual Control Speed Pan: 0.1° ~350° /s; Tilt: 0.1° ~350° /s, IR distance-250M, Smart IR-IR irradiation brightness and angle can be adjusted depending on the zoom ratio, Network Network Port-RJ45 10M, 100M Network Self Adjustable, Protocol-TCP/UDP, IPv4, IPv6, SSL, TLS, HTTP/HTTPS, HTTP-Base64, HTTP-Digest, DHCP, DNS, RTP, RTSPS, NTP, SMTP, IGMP, Multicast- System Compatibility-ONVIF Profile S, G & T,Discovery Interface-UPnP, ONVIF, Utility to Detect camera automatically and configure network settings, Security Features-"Authorized username and password, HTTPS with password, HTTPS digest authentication, Watermark, RTSPS, AES 256 encryption, SHA256 and RSA2048, OTP, Signed Firmware FirmwareAnti-rollback, TEE (Trusted Execution Environment), TRNG, User Authentication, and encrypted firmware, Hardware Secure Boot," ANR-Support, Smart Event Motion Detection Yes Temper Detection Yes Event Actions Enable Alarm Out, Send Email, Start Recording, Play Customized Audio Warning Interrface Audio Built-In-Mic or 1 IN/1 Out,Alarm 1Ch Alarm IN, 1Ch Alarm Out, SD Card-Support Up to 2TB, General Ingress Protection-IP67 Compliant, Vandalism Protection-IK10 Compliant, Surge Protection-TVS 6,000V Lightning Protection, Surge Protection and Voltage Transient Protection, Operating Temperature/ Humidity -50°C ~ 70°C (-40°F ~ +158°F) / 10–95% RH (condensing),Storage Temperature/ Humidity -50°C~70°C (-40°F ~ +158°F)/ 10–95% RH (condensing), Power supply, DC24V/1.5A（±10%), POE-PoE+ (802.3at), Power consumption (max.)-13W,20W (Heater on), Fan & Heater-Support, Certification-CE, FCC, BIS, STQC ER -Reliability Certification-MTBF >1,00,000 hours at 40°CMeitY

Supply and Delivery of Video Management Software (VMS) 1. The IP Video Management Software should allow Live Viewing/Streaming, Recording and Management solution of Network Video surveillance systems & shall not have any Limit on the Number of Cameras to be Connected & shall be Scalable to Unlimited IP Cameras in Future by Augmentation of Camera channel Licenses & server Hardware Components. 2. The Proposed VMS Software should be ONVIF S & G Profile Compliant & should be a Full Member of ONVIF.The Declaration of ONVIF S,G,T & M Profile shall be available on ONVIF Official Website www.onvif.org in the Conformant Devices. The Compliance/Conformance to the ONVIF Profile S &G should be available with the VMS OEM on or before the Date of Bid Publishing.A Certificate from ONVIF Indicating Membership details shall be Submitted as a Proof along with the technical Bid Documents." 3. The VMS shall be Windows based & shall be Compatible on Windows 10/11 Professional and Windows Server 2019/2022 Standard Edition 4.The VMS must Support for recording of H.265+, H265, H.264, MPEG4 or MJPEG Video Streams in at minimum 1 fps to 60 FPS at minimum CIF to Full HD (1080p) and 4K resolution. 5.The VMS must support RTP over UDP Stream, RTP over TCP and HTTP Video streaming 6.The VMS must support multiple brand of IP cameras and encoders. 7.The VMS must support for Pre-buffer and Post buffer recordings up to 10 minutes. 8.The VMS Application must have a Built in Storage and Bandwidth calculation tool, this shall Enable the Recoding size estimation for each hard disk attached to the server. This shall also enable to Option to check disk size requirement of individual camera based on the Current Camera Network Traffic/Bandwidth. " 9.The VMS must Support for Encryption with the Ability to encrypt video while exporting. Selectable options of 56 bit, 128 bit and 256 bit encryption shall be available to the Operator/User for Exporting with Password Protection. 10.The VMS Client Application should have a feature of Configurable Matrix views with user define size and number of cameras. Pre-defined views from full screen, 1x1 to 8x8. 11.The VMS Client Application must have the Option to change Live View directly from cameras or from VMS server using RTSPS and HTTPs options. 12.The VMS Application must Support Failover for Management & Video Recording Servers. The System should support N: 1 or N: N failover for Recording Servers. Failover time should not be more than 30 seconds. 13.The VMS must support for Connecting Multiple External Storage Devices in the form of Primary & Secondary Storage Drive. It must also have the Option of Storage Drive Redundancy, wherein if the Primary Drive is Unavailable then the VMS Application/Recording Server must Automatically Start Recording in the Secondary Configured Drive. 14.The VMS Web Client must support for H.265 Codec Live & Playback Streaming. 15. The Video Management Software (VMS) Application should be an Open Platform Application & should not be from the Same Camera OEM. The Proposed VMS Software should be ONVIF S & G Profile Compliant & should be a Full Member of ONVIF, The Declaration of ONVIF S,G,T & M Profile shall be available on ONVIF Official Website www.onvif.org in the Conformant Devices. The Compliance/Conformance to the ONVIF Profile S &G should be available with the VMS OEM on or before the Date of Bid Publishing. A Certificate from ONVIF Indicating Membership details shall be Submitted as a Proof along with the technical Bid Documents." 16. The VMS, Software OEM shall have a direct Registered Office & shall also have a Research & Development Center in India without any Collaboration, Joint Venture, Distributor, Parent Company & should be in Operational for the Last 10 Years as on the Last Date of Bid Submission. 17.The VMS OEM Should be in the Business of Video Management Software from last 10 years, OEM to Submit Purchase Order Copies to Substantiate the Proof ." 18.The Proposed Video Management Software (VMS)Application should have undergone Audit as per OWASP Top 10 Security Risks from STQC. A Security Test Report/Certificate from STQC to be Submitted as a Documentary Evidence/Proof.

Supply and Delivery of 8 Port PoE Switch L2 8 Port L2 10/100/1000 Mbps PoE Switch with 2 1G SFP Ports Port Configuration & Hardware Interfaces Switch should have 8*10/100/1000 Mbps Ethernet PoE+ ports with 2*1G SFP Uplink with 4 KV Surge protection on all Ethernet ports as per IEC 61000-4-5 Switch should have Console Port (RJ-45) for out-of-band CLI management, provide a direct, physical connection to the switch for management tasks, which can be especially useful if remote management is not possible, Should suport WEB management as well, Switch should have 8K MAC Address ,Switch should have 20 Gbps Switching capacity and 14 Mpps packet forwording rate Power Support and Energy Efficiency: The Switch should support Power Input 100 to 240 VAC 50/60 Hz The Switch Operating Temperature should be 0 to 50 °C (32 to 122 °F) with Storage Temperature • -40 to 70 °C (-40 to 158 °F) Layer 2 Features Switch should support 802.3x Flow Control Switch should support 802.1D, 802.1w , 802.1s. It also support Root Guard and Loop Guard Switch should support ring protection Switch should support 802.1AX Link Aggregation, Max. 8 groups per device, 8 ports per group Switch should support Port Mirroring ( One-to-One, Many-to-One) , also Supports Mirroring for Tx/Rx/Both Switch should support Remote Switched Port Analyzer, to takes a mirrored copy of network traffic from within the switch to be sent to a destination. Switch should support Port-based Q-in-Q QoS (Quality of Service): "Switch should support Queue Handling Strict Priority (SP), Weighted Round Robin (WRR) DSCP or SP+WRR" Switch should provides minimum granularity of 64 Kbps, ingress control for port based bandwidth control Security Features: Switch should support Port isolation, Port security and “IP+MAC+port” binding, MAC Sticky DHCP Snooping and option 82, IEEE 802.1x, Radius and Tacacs+ • L2/L3/L4 ACL flow identification and filtration Anti-attack from DDoS, Switch should support SSL, SSH "Switch provides multiple security measures to defend against attacks from SYN performance. Flood, UDP Flood, broadcast storm and mass flow of DOS or TCP." OAM and AAA services Switch should support Cable Diagnostics, OEM Should be in India from last 15 Years and registered on BSE and NSE Product/OEM should be registered on TTP Portal. All Functionalities of Solution shall be IPv6 compliant, and it should work on IPv6 Platform without any additional hardware/ software. OEM Eligibility Criteria for OEM of Switch (Active Components) The OEM should have their Own service centres in India (Min 10 RMA Centres) Documentary evidence must be submitted along with the bid. OEM should have valid ISO 9001 Certified for design and development of LAN and WAN products; all the relevant certificates must be submitted along with the bid otherwise it may cause for rejection of bid. OEM should have valid ISO/IEC 27001: 2013 Information Security Management System Certification. Certificate must be submitted along with the bid otherwise it may cause for rejection of bid. OEM should have Inventory of Green House Gas Emission verification certificate in accordance with ISO 140641: 2006. Certificate must be submitted along with the bid otherwise it may cause for rejection of bid. OEM Should have Security Certificate ISO 45001 and for Industrial Cyber Security Capability (Like IEC6244341: 2018 or Equivalent Indian Certificate). The OEM should have its own call centre for configuration and troubleshooting support, and a fully functional Call Centre / Helpdesk / TAC / Support Centre in India. The process for complaint booking, call logging, and the domain mail ID & Support numbers should be clearly explained. The OEM must provide an escalation matrix for service & support. To ensure stability & credibility of OEM, OEM should have Average Annual Financial Turnover not less than 500 Crores for their business in India for the last five financial years for data networking products. .

Supply and Delivery of 5MP BOX cameras Image sensor-1/1.8”, 4K Low Illumination Progressive Scan CMOS Sensor, Color: 0.001Lux @ (F1.2, AGC ON), 0.014 Lux @ (F1.4, AGC ON), B/W: 0 Lux with IR, IR Distance - 50 to 60 Mtr. External/Internal IR Illuminator, Shutter Speed,Auto, Slow Shutter, (1/1 sec ~ 1/100,000 sec Adjustable), WDR-Up to 120 dB,Day/Night, Lens Lens - 2.7 to 13.5mm Varifocal Lens,Mount Type - C/CS, Focus Control-Auto/ Manual, Video - Compression - H.265/H.264/MJPEG, H.265 Encoding, Main Profile, Streaming Capability-Quad Streams,Resolution-5MP,Streams "Mainstream: 5MP (2560X1920)@25/30fps , Frame Rate-1~ 30fps, Color Mode-Normal, Bright, Nature Exposure Mode-Off, High Light correction, Backlight Correction, Range (1-10), BLC Mode-1-10 configurable Levels,AE Algorithms-Shutter Priority, Gain Priority, Compression-G.711U/A, Network Network Port-RJ45 10M/100M Network Self Adjustable, Protocol-TCP/IP, IPv4, IPv6, SSL, TLS, UDP, HTTP/HTTPS, HTTP-Base64, HTTP-Digest, DHCP, DNS, RTP, RTSPS, NTP, SMTP, IGMP, Multicast, System Compatibility ONVIF Profile S, G, T, M (CCTV OEM should be full member of ONVIF. OEM should give the declaration about full membership at the time of bidding.), Discovery Interface UPnP, ONVIF, Utility to Detect camera automatically and configure network settings,Security Features "Authorized username and password, HTTPS with password, HTTPS digest authentication, Watermark, RTSPS, AES 256 encryption, SHA256 and RSA2048, OTP, Signed Firmware,Interface Audio Built-In-Mic or 1 IN/1 Out, Alarm 1Ch Alarm IN, 1Ch Alarm Out, SD Card Yes, Support up to 2TB, General Operating Conditions -40 °C ~ 70 °C Humidity 95% or Less (Non-Condensing), Storage Conditions -40 °C ~ 70 °C Humidity 95% or Less (Non-Condensing Surge Protection-TVS 4000V Lightning Protection, Surge Protection & Voltage Transient Protection, Power supply DC 12V ± 10% / PoE (802.3af), Power Consumption <12W Product Certification CE, FCC, BIS, STQC ER, Reliability Certification-MTBF >1,00,000 hours at 40°C (NABL Test Report must be submit at the time of bidding) Housing Voltage-220V AC, Power : Heater: 10W @ 12V, Fan: 2.2W @ 12V DC, PoE+ IEEE 802.3 ,Material-Aluminium Alloy, Temperature Control-Auto temperature control with built-in Fan & Heater, IR Range-30 – 40 meters, Construction-Aluminium Housing & Casing, Neoprene Gaskets, UV-resistant Polymer End Caps, Tamper Resistance Tamper-resistant screws for locking clasps, Enclosure Protection-IP67 & IK10,Vandal Proofing-Vandal-proof and impact-resistant, Operating Temperature-25°C to 60°C, 20–80% RH (Non-condensing) Certifications – Safety CE/FCC

Video Analytics License Intrusion Detection: Detects unauthorized entry into a restricted or predefined area and triggers an alert instantly. Loitering Detection: Identifies people staying in an area for longer than the defined time, useful for detecting suspicious behavior. Motion Detection: Detects any movement within the camera view and generates alerts based on sensitivity settings. People Counting: Counts the number of people entering or exiting an area, helpful for footfall analysis and capacity management. Crowd Detection: Detects gathering of people beyond a set threshold and alerts when overcrowding occurs. Object Detection: Identifies specific objects (e.g., vehicles, bags, equipment) within the camera view for monitoring and analysis. Unattended Baggage Detection: Detects bags or objects left unattended for a defined time, commonly used in public and high-security areas. Garbage Detection/Debris Detection: One camera should run three AI features at the same time.

Providing Labour Charges for Camera Configuration with crimping and jack

Supply and Delivery of Outdoor Metal + Pole Mountable 9U Rack with Lock set

Supply and Delivery of 2+2 6 Amp Switch Socket Combined Box

Supply and Fixing of 4 PAIR CAT6 CABLE for OUTDOOR

Supply and Delivery of UPS (1-2 kVA+ Batteries)

Note: Connectivity and Configuration Responsibilities: Connectivity from all locations to the Command & Control Centre will be provided by Nellore Municipal Corporation. However, it shall be the responsibility of the bidder to carry out all necessary configurations to ensure proper integration and connectivity of the cameras with the Command & Control Centre.