GENERAL-MP-BUILDING-Providing Stainless steel handrails and Interlock tiles for Division Building-General Civil Work

Amount

Stainless Steel Hand rails

10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

OD33059/2025-2026:Supply and Installing of Pre cast concrete rig 1.2 m inside diameter 5 cm thickness and 30 cm deep including transportation and laying.

18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

OD33003/2025-2026:Providing and laying factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of 6mm stone aggregate, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

17.2.1:Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid

OD33063/2025-2026:UPVC LOUVER- designing , fabricating and fixing white UPVC profile ( Unplasticized polyvinyl chloride) Louver, casement frame, fixing louver ,water hole cap, fixing to wall/ beam with nylon anchor screw N8 X 80 mm with plug , Anti UV all weather resistant, pinned glass

OD32447/2025-2026:T grid ceiling 15 mm black grove powder coated channels with laminated gypsum tiles 9 mm thickness 600 mm x 600 mm

OD32448/2025-2026:UPVC open door (Size-2.4m x 1.00m)- designing , fabricating and fixing white UPVC profile ( Unplasticized polyvinyl chloride) open door, casement frame, casement big sash , GI reinforcement , single glazing bead, double side handle with key , Espag, 3D hinges, UPVC panel , fixing to wall/ beam with nylon anchor screw N8 X 80 mm with plug , Anti UV all weather resistant

5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources)

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

OD30783/2025-2026:Engaging man mazdoor for various works to execute the work as per the directions of department officers at site

OD33338/2025-2026:Supply stone aggregate 6mm and laying uniformily asper the dircetion of Engineer in charge at site

SUJEESH V (BID ID -2421634)

Bidder Name

K HARINARAYANAN

SUJEESH V