CERTAIN REPAIR AND MAINTENANCE OF MD ACCN AND OTM ACCN FURNITURE AT ICGS VISAKHAPATNAM UNDER GE(I)(CG) VIZAG

All as per item No. 1 here-in-before but Rear Leg

All as per item No. 1 here-in-before but Back Rest.

All as per item No. 1 here-in-before but Bend Stiffner.

All as per item No. 1 here-in-before but Front Rail.

All as per item No. 1 here-in-before but Back Rail.

All as per item No. 1 here-in-before but Side Rail.

All as per item No. 1 here-in-before but Bottom Stiffner.

M&L for french polishe of old treated wooden surface of Chair Dining (FD-279) by scrapping the old tane shade polish, dirt stains on arms, outer surfaces of the item with emery paper or paper machine. The uneven surfaces to be filled with Bee-wax and then polish with two coats of French polish as specified to get the glossy look complete all as specified and directed.

Dismantling and taking out carefully old Unserviceable / Worn – Out and broken Front rail of Chair Dining Cushioned (FD/E6/MAP/10-R / FD/MAP-II/04) and replace the same with new rail of 1st class hard wood (teak) (size and dimension of the parts shall be of the same pattern / size as shown in drawings and as specified) and applying two coats of french polish to all the replaced parts to match with the existing after preparation of surface complete all as specified and directed.

All as per item No. 10 here-in-before but Back Rail.

All as per item No. 10 here-in-before but Side Rail.

All as per item No. 10 here-in-before but Front Leg.

All as per item No. 10 here-in-before but Back Stiffner.

All as per item No. 10 here-in-before but Seat and new cushion of 75 mm thick, 28 density foam seat covered with fabric of approved colour shall be fixed to 12 mm thick commercial plywood.

M&L for french polishe of old treated wooden surface of Chair Dining cushioned (FD/E6/MAP/10-R / FD/MAP-II/04) by scrapping the old tane shade polish, dirt stains , outer surfaces of the item with emery paper or paper machine. The uneven surfaces to be filled with Bee-wax and then polish with two coats of French polish as specified to get the glossy look complete all as specified and directed.

M&L for french polishe of old treated wooden surface of Chair EASY ((FD-229 / 201) by scrapping the old tane shade polish, dirt stains , outer surfaces of the item with emery paper or paper machine. The uneven surfaces to be filled with Bee-wax and then polish with two coats of French polish as specified to get the glossy look complete all as specified and directed.

M&L for french polishe of old treated wooden surface of Hat Stand (FD-233) by scrapping the old tane shade polish, dirt stains , outer surfaces of the item with emery paper or paper machine. The uneven surfaces to be filled with Bee-wax and then polish with two coats of French polish as specified to get the glossy look complete all as specified and directed.

Taking out carefully old Unserviceable broken aluminium peg hook of Hat Styand (FD-233) and replace the same with new 75 mm aluminium anodised peg hooks complete all as specified and directed.

M&L for fixing of Table Dressing gents / hat stand with mirror on the wall at various location with suitable size of screw and wooden / PVC plug after drilling the wall as required complete all as specified and directed.

M&L for removal of existing damage top of Peg Table (FD-277 / 384) and supply and fixing new top of 18 19 mm thick pre-laminated particle board of size 450 x 300 mm with one side decorative teak finish with and including 4 mm thick teak wood edging (18 / 19mm wide) all around duly french polished complete all as specified and directed.

Dismantling and taking out carefully old Unserviceable / Worn – Out and broken Leg of Peg Table (FD-277 / 384) and replace the same with new Leg of 1st class hard wood (teak) (size and dimension of the parts shall be of the same pattern / size as shown in drawings and as specified) and applying two coats of french polish to all the replaced parts to match with the existing after preparation of surface complete all as specified and directed.

M&L for french polishe of old treated wooden surface of Peg Table (FD-277 / 384) by scrapping the old tane shade polish, dirt stains , outer surfaces of the item with emery paper or paper machine. The uneven surfaces to be filled with Bee-wax and then polish with two coats of French polish as specified to get the glossy look complete all as specified and directed.

Dismantling and taking out carefully old Unserviceable / Worn – Out and broken Leg of SOFA SET 5 SEATER / SINGLE SEATER (3+1+1)/1 (FD-234 / 281) and replace the same with new Leg (70mm x 35mm x 495mm) of 1st class hard wood (teak) (size and dimension of the parts shall be of the same pattern / size as shown in drawings and as specified) and applying two coats of french polish to all the replaced parts to match with the existing after preparation of surface complete all as specified and directed.

Dismantling and taking out carefully old Unserviceable / Worn – Out and broken Arm of SOFA SET 5 SEATER / SINGLE SEATER (3+1+1)/1 (FD-234 / 281) and replace the same with new Arm (70mm x 35mm x 745mm) of 1st class hard wood (teak) (size and dimension of the parts shall be of the same pattern / size as shown in drawings and as specified) and applying two coats of french polish to all the replaced parts to match with the existing after preparation of surface complete all as specified and directed.

Dismantling and taking out carefully old Unserviceable / Worn – Out and broken Batten of SOFA SET 5 SEATER / SINGLE SEATER (3+1+1)/1 (FD-234 / 281) and replace the same with new Batten (50mm x 20mm x 580mm) of 1st class hard wood (teak) (size and dimension of the parts shall be of the same pattern / size as shown in drawings and as specified) and applying two coats of french polish to all the replaced parts to match with the existing after preparation of surface complete all as specified and directed.

Dismantling and taking out carefully old Unserviceable / Worn – Out and broken Side Rail of SOFA SET 5 SEATER / SINGLE SEATER (3+1+1)/1 (FD-234 / 281) and replace the same with new Side Rail (100mm x 35mm x 625mm) of 1st class hard wood (teak) (size and dimension of the parts shall be of the same pattern / size as shown in drawings and as specified) and applying two coats of french polish to all the replaced parts to match with the existing after preparation of surface complete all as specified and directed.

Dismantling and taking out carefully old Unserviceable / Worn – Out and broken Long Rail of SOFA SET 5 SEATER (3+1+1) (FD-234 / 281) and replace the same with new Long Rail (100mm x 35mm x 1630mm) of 1st class hard wood (teak) (size and dimension of the parts shall be of the same pattern / size as shown in drawings and as specified) and applying two coats of french polish to all the replaced parts to match with the existing after preparation of surface complete all as specified and directed.

Taking out old pressed / torn cushions from each set and supply of 32 density , 100 mm thick PU foam cushion of size 520mm x 560mm x 100mm duly covered with inner linen cloth and best tapestry cloth, price of cloth should not be less than Rs.400/- per meter of approved colour and shade, Each cushion cover shall be provided with best quality polyester zipper stitched on one edge of cushion cover covered under the flap of cloth with standard fitting complete all as specified and directed.

M&L for french polishe of old treated wooden surface of SOFA SET 5 SEATER (3+1+1) (FD-234 / 281) by scrapping the old tane shade polish, dirt stains , outer surfaces of the item with emery paper or paper machine. The uneven surfaces to be filled with Bee-wax and then polish with two coats of French polish as specified to get the glossy look complete all as specified and directed.

M&L for french polishe of old treated wooden surface of SOFA SET SINGLE SEATER (3+1+1) (FD-234 / 281) by scrapping the old tane shade polish, dirt stains , outer surfaces of the item with emery paper or paper machine. The uneven surfaces to be filled with Bee-wax and then polish with two coats of French polish as specified to get the glossy look complete all as specified and directed.

Dismantling and taking out carefully old Unserviceable / Worn – Out and broken Top of TABLE DINING FOR 6 PERS / 4 PERS (FD-273 / FD/MAP-II/03) and replace the same with new Top (Size 1500 x 900) shall be made out of 18 / 19 mm thick prelaminated particle board, exterior grade with one side decorative teak finish with and including 4 mm thick teak wood edging (18 / 19mm wide) all around duly french polished complete all as specified and directedcomplete all as specified and directed.

Dismantling and taking out carefully old Unserviceable / Worn – Out and broken Top of TABLE DINING FOR 6 PERS / 4 PERS (FD-273 / FD/MAP-II/03) and replace the same with new Top (Size 1200 x 900) shall be made out of 18 / 19 mm thick prelaminated particle board, exterior grade with one side decorative teak finish with and including 4 mm thick teak wood edging (18 / 19mm wide) all around duly french polished complete all as specified and directedcomplete all as specified and directed.

Dismantling and taking out carefully old Unserviceable / Worn – Out and broken Leg of TABLE DINING FOR 6 PERS / 4 PERS (FD-273 / FD/MAP-II/03) and replace the same with new Leg of 1st class hard wood (teak) (size and dimension of the parts shall be of the same pattern / size as shown in drawings and as specified) and applying two coats of french polish to all the replaced parts to match with the existing after preparation of surface complete all as specified and directed.

All as per item No. 34 here-in-before but WOODDEN CORNER BRACKET, 25 mm thick, made to shape and shall be fixed to rail and leg with screw. (Note: Each Table contains 08 Nos bracket)

M&L for french polishe of old treated wooden surface of TABLE DINING FOR 6 PERS / 4 PERS (FD-273 / FD/MAP-II/03) by scrapping the old tane shade polish, dirt stains , outer surfaces of the item with emery paper or paper machine. The uneven surfaces to be filled with Bee-wax and then polish with two coats of French polish as specified to get the glossy look complete all as specified and directed.

Dismantling and taking out carefully old Unserviceable / Worn – Out and broken Leg of Teapoy (FD-278) and replace the same with new Leg of 1st class hard wood (teak) (size and dimension of the parts shall be of the same pattern / size as shown in drawings and as specified) and applying two coats of french polish to all the replaced parts to match with the existing after preparation of surface complete all as specified and directed.

All as per item No. 37 here-in-before but Long Rail.

All as per item No. 37 here-in-before but Short Rail.

M&L for french polishe of old treated wooden surface of TEAPOY (FD-278) by scrapping the old tane shade polish, dirt stains , outer surfaces of the item with emery paper or paper machine. The uneven surfaces to be filled with Bee-wax and then polish with two coats of French polish as specified to get the glossy look complete all as specified and directed.

Dismantling and taking out carefully old Unserviceable / Worn – Out and broken Leg of Table Centre (FD-274) and replace the same with new Leg of 1st class hard wood (teak) (size and dimension of the parts shall be of the same pattern / size as shown in drawings and as specified) and applying two coats of french polish to all the replaced parts to match with the existing after preparation of surface complete all as specified and directed.

All as per item No. 41 here-in-before but Long Rail.

All as per item No. 41 here-in-before but Short Rail.

M&L for french polishe of old treated wooden surface of Table Centre (FD-274) by scrapping the old tane shade polish, dirt stains , outer surfaces of the item with emery paper or paper machine. The uneven surfaces to be filled with Bee-wax and then polish with two coats of French polish as specified to get the glossy look complete all as specified and directed.

Dismantling and taking out carefully old Unserviceable / Worn – Out and broken Leg of Table Writing (FD-275) and replace the same with new Leg of 1st class hard wood (teak) (size and dimension of the parts shall be of the same pattern / size as shown in drawings and as specified) and applying two coats of french polish to all the replaced parts to match with the existing after preparation of surface complete all as specified and directed.

All as per item No. 45 here-in-before but Long Rail.

All as per item No. 45 here-in-before but Short Rail.

Dismantling and taking out carefully old Unserviceable / Worn – Out and broken SHUTTER of TABLE WRITING (FD-275) and replace the same with new SHUTTER made out of 18 / 19 mm thick prelaminated particle board, exterior grade with 1.50mm thick decorative lamination fixed on one side complete all as specified and directed .

Dismantling and taking out carefully old Unserviceable / Worn – Out and broken DRAWER of TABLE WRITING (FD-275) and replace the same with new DRAWER complete all as specified and directed .

M&L for french polishe of old treated wooden surface of Table Writing (FD-275) by scrapping the old tane shade polish, dirt stains , outer surfaces of the item with emery paper or paper machine. The uneven surfaces to be filled with Bee-wax and then polish with two coats of French polish as specified to get the glossy look complete all as specified and directed.

M&L for removing unserviceable handle of Almirah steel medium / Almirah large steel/ Almirah half hanging replacing with Brass chromium plated handle, 100 mm long, as per Godrej Pattern. (FD-1032/1034 /FD/MAP/18) complete all as specified and directed. (Note:- The repair work shall be carried out at various units / BSO yard as per the directions of Engr in charge. Rate shall be inclusive of all subsequent expenditure incurred for carrying out repair work at various units)

M&L for One side leg of Almirah small steel / Almirah small steel half hanging half shelving (FD-1032 / 1034), left or right, 70 mm wide and 100 mm high, open ends bent outwards upto 15 mm, MS sheet of 1.6 mm thick, welding the channel to bottom of almirah at 50 mm from the side of almirah with and including painting with two coats of synthetic enamel paint TA grey colour or colour as directed complete all as specified and directed.

M&L for One side leg of Almirah large steel (FD/E6/MAP/18), left or right, 70 mm wide and 100 mm high, open ends bent outwards upto 15 mm, MS sheet of 1.6 mm thick, welding the channel to bottom of almirah at 50 mm from the side of almirah with and including painting with two coats of synthetic enamel paint TA grey colour or colour as directed complete all as specified and directed.

M&L for 3 way locking device of Almirah small steel / Almirah small steel half hanging half shelving (FD-1032 / 1034) as per Godrej pattern, fully operational with the existing handle complete all as specified and directed.

M&L for 3 way locking device of Almirah large steel (FD/E6/MAP/18) as per Godrej pattern, fully operational with the existing handle complete all as specified and directed.

M&L for Steel cup board lock, 50 mm size, 6 lever with stainless steel keys in duplicate as per Godrej pattern. (FD-1032/1034/ FD/MAP/18))

M & L preparation of old treated steel surfaces of Almirah small steel / Almirah small steel half hanging half shelving (FD-1032 / 1034) and applying a coat of synthetic enamel paint complete all as specified and directed.

M & L preparation of old treated steel surfaces of Almirah large Steel as per drawing No. FD/E6/MAP/18 and applying a coat of synthetic enamel paint complete all as specified and directed.

Removing the existing unserviceable/damaged door of Almirah large Steel as per drawing No. FD/E6/MAP/18 carefully by removing the hinges of Almirah large Steel and supply and fixing new shutter made of 1 mm thick MS sheet of same size and shape to almirah large steel. Complete all as directed and shown on drawing.

Removing the existing unserviceable/damaged door carefully by removing the hinges of Almirah small steel / Almirah small steel half hanging half shelving (FD-1032 / 1034) and supply and fixing new shutter made of 1 mm thick MS sheet of same size and shape to almirah Medium steel. Complete all as directed and shown on drawing.

Dismantling and taking out carefully old Unserviceable / Worn – Out and broken Head Board of BED HARD WITH PLY TOP (Drg No FD/MAP/08(R)) and replace the same with new 18mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination of size 630x185mm, screwed to MS strip / frame complete all as specified and directed .

Dismantling and taking out carefully old Unserviceable / Worn – Out and broken Foot Board of BED HARD WITH PLY TOP (Drg No FD/MAP/08(R)) and replace the same with new 18mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination of size 630x310mm, screwed to MS strip / frame complete all as specified and directed .

Supply and fixing for 45mm long 20x5mm size MS flat iron for fixing head/foot board shall be fixed with arc welding to rectangular pipe of BED HARD WITH PLY TOP (Drg No FD/MAP/08(R)) and appling two coats of synthetic enamel paint over a coat of red oxide primer to MS flat after welding including taking out old unserviceable MS strip of any size complete all as specified and directed .

Supply and fixing for 25x25x1.25mm thick MS square tube, 850mm long, as in stiffner of bed hard, welded to long rail of BED HARD WITH PLY TOP (Drg No FD/MAP/08(R)), and appling two coats of synthetic enamel paint over a coat of red oxide primer to MS pipe after welding including taking out old unserviceable MS pipe of any size complete all as specified and directed.

Supply and fixing of 12 mm thick BWR Grade Plywood IS: 303 of size 6'.6" x 3' Type A / AA (approved brand i.e., Greenply/ Kitply/ Century/ Sylvan/ National/ Assam ply/ ARCHID/ ALISHAN) over the Long rails & short rails through drilling holes with 10 in No. Nickel Nut, bolt and washers of BED HARD WITH PLY TOP (Drg No FD/MAP/08(R)). The four corner parts of plytop to be made curve shape as directed and also alround edge of Ply should be applied mixture of french chalk powder, shellac & spirit and added colour for smooth finish irrespective of drawing complete all as specified and directed.

S & F rubber shoes suitable for 38x38mm MS square tube as leg of bed hard with plytop (Drg No FD/MAP/08(R)) complete all as specified and directed by Engineer-in-Charge.

M & L preparation of old treated steel surfaces of Bed Hard with ply top (Drg No FD/MAP/08(R)) and applying a coat of synthetic enamel black paint complete all as specified.

Dismantling and taking out carefully old Unserviceable / Worn – Out and broken Top of TABLE BED SIDE (FD-273 / FD/E6/MAP/15(R)) and replace the same with new Top (Size 450 x 450) shall be made out of 18 / 19 mm thick prelaminated particle board, laminated one side with decorative choice lamination and other side balancing white lamination to match with existing colour and texture as in side / front / back drawer including PVC edging all around complete all as specified and directedcomplete all as specified and directed.

Supply and fixing in repair 50mm long, brass, chromium plated handle suitable for Table bed side (FD-273 / FD/E6/MAP/15(R)) complete all as specified.

M & L preparation of old treated steel surfaces of Table Bed side steel (MAP) (FD-273 / FD/E6/MAP/15(R)) and applying a coat of synthetic enamel paint complete all as specified.

Removing by unscrewing the unserviceable damaged Seat & back from each chair of CHAIR COMPUTER (FD/E6/MAP/01) carefully including removing the existing torn out tapsetry cloth , pressed foam cushion, elastic webbing tape from each seat and back.The seat and back shall be fully upholstered by using new 60mm thick 40 density foam sheets and new webbing tape.The seat and back shall duly covered with new tapestry cloth of approved colour and texture ,the rate of cloth shall not be less than 350 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker complete all as specified and as directed.

Removing old unserviceable arm rest of CHAIR COMPUTER (FD/E6/MAP/01) and S&F new arm of same shape and size ,made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert complete all as specified and directed .

Removing unserviceable castor twin wheels of CHAIR COMPUTER (FD/E6/MAP/01) and S&F new castor twin wheel suitable for chair computer complete all as specified and directed .

Removing unserviceable adjustable pedestal assembly with hydraulic system of CHAIR COMPUTER (FD/E6/MAP/01) and S&F new pedestal assembly with hydraulic system having forward tilt, self regulating tilt tension and manual override, 4 position tilt lock. Anti shock back mechanism to prevent backrest. 360 swivel mechanism to allow with fluid lateral movement suitable for chair computer complete all as specified and directed.

Painting to all steel portion of chair computer with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper, making surface neat and smooth complete all as specified and directed..

Dismantling and taking out carefully old Unserviceable / Worn – Out and broken Top of TABLE OFFICE CLERK STEEL (FD-84(M)) and replace the same with new Top (Size 1200 x 600) shall be made out of 18 / 19 mm thick prelaminated particle board, teak veneer facing on one side and balancing white lamination on the other side including 4mm thick teak wood edging all around complete all as specified and directedcomplete all as specified and directed.

All as per Sl item No. 76 here-in-above, but new top of size 1800x1200 mm for Table office officer steel FD-84(M).

S&F in lock for table drawer of Table office clerk steel FD - 84(M), MS lock, 4 lever with stainless steel duplicate keys, duly fixed to the top drawer and providing automatic locking system to other three drawers including taking down of old lock complete all as specified and directed.

All as per Sl item No.78 here-in-above, but lock for Table office officer steel FD-84(M)

S&F new 1 mm MS channel runner of 400 mm long folded to make shape duly welded one side to table frame to run the drawers smoothly including taking down old broken channel and make functional all drawers of table office clerk steel FD - 84(M) complete.

All as per Sl item No.80 here-in-above, but MS channel runner for Table office officer steel FD-84(M)

M & L preparation of old treated steel surfaces of Table Office Clerk Steel (FD-84(M)) and applying a coat of synthetic enamel paint complete all as specified.

M & L preparation of old treated steel surfaces of Table Office Officer Steel (FD-84(M)) and applying a coat of synthetic enamel paint complete all as specified.

Removal of old broken wooden seat of Chair CB steel with arm (FD-75(M)) and replacing the same with new seat with and including canning and polishing complete all as shown in drawings and as specified.

Removal of old broken wooden seat of Chair CB steel without arm (FD-75(M)) and replacing the same with new seat with and including canning and polishing complete all as shown in drawings and as specified.

Removal of old broken wooden Back of Chair CB steel with arm (FD-75(M)) and replacing the same with new seat with and including canning and polishing complete all as shown in drawings and as specified.

Removal of old broken wooden Back of Chair CB steel without arm (FD-75(M)) and replacing the same with new seat with and including canning and polishing complete all as shown in drawings and as specified.

Removal of old broken wooden Arm Rest of Chair CB steel with arm (FD-75(M)) and replacing the same with new seat with and including canning and polishing complete all as shown in drawings and as specified.

M & L preparation of old treated steel surfaces of Chair CB steel with arm Steel (FD-75(M)) and applying a coat of synthetic enamel paint complete all as specified.

M & L preparation of old treated steel surfaces of Chair CB steel without arm Steel (FD-75(M)) and applying a coat of synthetic enamel paint complete all as specified.

Dismantling / taking down of existing torn / unserviceable cane plastic from the followings and M&L for recanning the same with new plastic cane of size 3.00mm x 0.60mm complete all as specified and directed:-

Chair Dining (FD-279)

Chair Varandah (FD-259)

Chair Easy (FD-281/229/201)

Chair writing (FD-261)

Chair CB Steel with arm (FD-75(M)

Chair CB Steel without arm (FD-75(M)

CHAIR REVOLVING MAKE-ADIKO / GODREJ, MODEL NO - LEATHERITE CHAIR / ACE :-

Removing by unscrewing the unserviceable damaged Seat & back from each chair carefully .Removing the existing torn out tapsetry cloth, pressed foam cushion,elastic webbing tape from each seat and back.The seat and back shall be fully upholstered by using new 60mm thick 40 density foam sheets and new webbing tape.The seat and back shall duly covered with new leatherite of approved colour and texture.Complete all as specified and as directed.

Removing old unserviceable arm rest of chair and S&F new arm of same shape and size complete all as specified and directed.

Removing unserviceable castor twin wheels and S&F new castor twin wheel suitable for chair complete all as specified and directed.

Removing old unserviceable Hydraulic cylinder of chair and S&F new hydraulic cylinder complete all as specified and directed.

Removing unserviceable pedestal assembly,supply and fixing new pedestal assembly having five arms with twin wheel castor wheels having wheel base not less than 70 cms complete all as specified and directed .

Gun Painting to all steel portion of chair revolving with synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper, making surface neat and smooth complete all as specified and directed .

GODREJ INTERIO CIGNUS MAIN TABLE / GODREJ INTERIO FINNESSE MAIN TABLE :-

S&F new set of 1 mm MS channel runner of 400 mm long folded to make shape duly welded one side to table frame to run the drawers smoothly including taking down old broken channel and make functional all drawers of GODREJ INTERIO TABLE complete all as specified and directed.

Please Enable Macros to View BoQ information