REPAIR TO MES INSTALLATION, WATER SUPPLY INSTALLATION, SANITARY FITTINGS AND OTHER MISC WORKS AT AF STATION BARODA

Amount

Demolition of cement Concrete (unreinforcement in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement Concrete (Reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry built in cement mortar incl all quoins, arches pillars etc complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness Laid bedded and pointed in any mortar in floors, aprons etc complete all as specified and directed complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

M&L Plain Cement concrete type C-2 1:3:6 (using 40mm stone aggregate) as in surface channels and drains finished surfaces even and smooth using extra cement including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

M&L for PCC type B-0 1:2:4 (using 12.5mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamferred on edges complete all as specified and directed.

M&L for PCC type B-1 1:2:4 (using 20mm graded stone aggregate) as in coping etc complete all as specified and directed.

M&L for RCC type B-1 1:1 1/2:3 (using 20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for RCC type B-1 1:1 1/2:3 (using 20mm graded stone aggregate) as in Chajjas. Complete all as specified and directed.

Supply only intigrated water proofing compound

M&L Brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L Brickwork with sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

M&L for Cutting chases in brick walls, for concealed water tubing , etc., and making good in CM 1:3, cutting exc 10 cm and n.exc 20cm girth complete all as specified and directed.

M&L fair cutting on brick work any description exc 10cm width or girth from external wall and repair of joints with CM 1:1 without distrubing internal floor/tiles and making good in CM 1:3 (with WPC) checking of leakage after one week, complete all as specified and directed.

M&L 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide. (Where RCC/PCC band in walls, spanning and opening, complete all as specified and directed.

Taking down Chowkats or frames with shutter (without taking off shutter from the frame) not exc. 1.5 sq. m each and removing to store complete all as specified and directed.

Taking down Chowkats or frames with shutter (without taking off shutter from the frame) exc. 1.5 sq. m and n.exc 4.00 sqm each removing to store complete all as specified and directed.

S&F 150 mm Aluminium anodised tower bolts of extruded section including screws complete all as specified and directed.

S&F (in repair) 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 75mm size butt hinges stainless steel medium weight complete all as specified and directed.

S&F 100mm size butt hinges stainless steel medium weight complete all as specified and directed.

S&F 150mm size Aluminium handles, cast type, anodized complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor over all length 150mm complete all as specified and directed.

S&F in repair Stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

M& L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L, Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally tor hooping far columns. hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to TMT bars complete all as specified and directed.

M&L, Mild steel bars 5mm dia and over upto 10mm dia, cut to length, bent to shape required, including cranking, bending spirally tor hooping far columns. hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to TMT bars in sturrups, spacers and binders etc complete all as specified and directed.

M&L aluminium frames and shutters powder coated for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc incl taking down old frames with shutters, mongry etc complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over and including 20mm cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of theslab including rubbing and polishing complete all as specified and directed.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick cement screed in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M&L Plain cement concrete type B-1 1:2:4 (using 20mm graded crushed stone aggregate) as in 25mm thick sub base of flooring finished surfaces rough to receive floor finishes, complete all as specified and as directed.

M&L Plain cement concrete type D-2 1:4:8 (using 40mm graded crushed stone aggregate) as in 75mm thick flooring finished surfaces even and rough to receive the flooring etc without using extra cement, complete all as specified and as directed.

M&L Plain cement concrete type B-2 1:2:4 (using 40mm graded crushed stone aggregate) as in 75mm thick flooring finished surfaces even and fair without using extra cement, complete all as specified and as directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl screed bed 15mm thick in CM 1:6, complete all as specified and directed.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square /rectangular ) matching shade with item above set and jointed in neat cement slurry and pointed in white cement to match as in skirting over and including 10 mm thick rendering in CM 1:4 as backing coat, even and fair to receive tiles etc complete all as specified and directed

M&L Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.

M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished (doubly charged), area of each tiles not exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thcik screed bed in CM 1:6 complete all as specified and directed.

M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished (doubly charged), as in skirting, dado etc with matching to item No . set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thcik screed bed in CM 1:6 complete all as specified and directed.

Dismantling floor, hearth or including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6, finished even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 15mm thick on other than fair faces of brick work or stone surfaces in CM 1:4, finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10mm thick on concrete surfaces such as on ceiling finished surfaces even and smooth without using extra cement in cement mortar 1:3 complete all as specified and directed.

M&L Rendering 10mm thick on fair faces of brick work or concrete sur­faces in CM 1:6, finished even and smooth without using extra cement but in patches n.exc 3 sqm each patch with water proofing compound (WPC measured and paid separately), complete all as specified and directed.

M&L Rendering 15mm thick on other than fair faces of brick work or stone surfaces in CM 1:4, finished even and smooth without using extra cement but in patches n.exc 3 sqm each patch with water proofing compound (WPC measured and paid separately), complete all as specified and directed.

M&L rendering 10mm thick on concrete surfaces such as on ceiling finished surfaces even and smooth without using extra cement in cement mortar 1:3 but in patches n.exc 3 sqm each patch with water proofing compound (WPC measured and paid separately), complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L, Preparation of newly plastered surfaces of walls and applying two coats of Oil Bound Distemper over and including a priming coat, complete all as specified and as directed

M&L, Preparation of old plastered surfaces of walls and applying two coats of Oil Bound Distemper by complete removal of existing treatment incl washing rubbing down and stopping of distempered and painted surfaces, complete all as specified and directed

M&L, Preparation of old plastered surfaces of walls and applying one coat of Oil Bound Distemper complete all as specified and as directed

M&L, Preparation of newly plastered surfaces of walls and applying two coats of Cement Base paint over and including a priming coat, complete all as specified and as directed

M&L, Preparation of old plastered surfaces of walls and applying two coats of Cement Base paint by complete removal of existing treatment incl washing rubbing down and stopping of distempered and painted surfaces, complete all as specified and as directed

M&L, Preparation of old plastered surfaces of walls and applying one coat of Cement base Paint complete all as specified and directed

M&L, Preparation of newly plastered surfaces of Ceiling and applying two coats of Cement Base paint over and including a priming coat, complete all as specified and as directed

M&L, Preparation of old plastered surfaces of Ceiling and applying two coats of Cement Base paint by complete removal of existing treatment incl washing rubbing down and stopping of distempered and painted surfaces, complete all as specified and directed

M&L, Preparation of old plastered surfaces of Ceiling and applying one coat of Cement base Paint complete all as specified and directed

M&L, Preparation of old surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L, Preparation of newly plastered surfaces of walls and applying three coats of white wash , complete all as specified and directed

M&L, Preparation of old plastered surfaces of walls and applying two coat of white wash complete all as specified and as directed

S&F 4mm thick Sheet glass, ordinary Quality and glazing with oil putty or wooden beeds in square exc 0.5 sq. m in each pane complete all as specified and directed.

S&F 4mm thick Figured glass, pin head type and glazing with oil putty or wooden beeds in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

M&L Preparation of old wooden Surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L Preparation of old steel Surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and colour pigment , complete all as specified and as directed

Labour only for re-fixing of Machine pressed precast concrete interlocking paver block any shape, size and thickness, with grey cement and colour pigment , Complete all as specified and as directed

M&L for Sand filling under floors or in foundations including watering and consolidation in layers, complete all as specified and as directed

M&L for continuous Precast Plain Cement Concrete Kerb stone of size 400x200x100mm with Type B1 (1:2:4) (using 20mm stone aggregate) including weathering, slightly rounded or chemfered angle and set in cement mortar 1:4, complete all as specified and directed

M&L for taking down exesting waterproofing treatment (WPT) of any description from roof surfaces and roughening of concrete surfaces cleaning and wahsing down the surfaces with water and removing rubbish to out side MD land complete all as specified and directed . Note :- Felts and cement plaster/tiles etc shall be measured as one layer only.

M&L for 20mm thick screed bed or bedding layer in CM 1:6 over roof surfaces without using extra cement for screed bed with water proofing compound (WPC) Complete all as specified and directed.

M&L for applying cold bituminous primer @ 0.30 ltr/Sqm confirming to IS-3384 and laying APP polymer modified fiber glass reinforced membrane 3mm thick weight not less than 3.5kg/sqm (modified bituminous water proofing membrane ) with plain finish with polystere base reinforcement, sealing all over with lap of 75mm in length side and 100mm on width side of membrane by torching the same and including applying a coat of bituminous aluminium paint @ 100 gms/sqm all as per manufacturer instructions complete all as specified and directed . Note:- (a) Rate quoted deemed to be inclusive of cleaning of surface to be treated properly to receve the primer and all as directed by the Engr-in-Charge. (b) Necessary guarantee certificate shall be given by contractor for 10 years from the date of completion of work. (c) APP membrane treatment shall be done firstly at corners and junction of parapet wall 30cm on verticle position and 30cm on horizontal position shall be done with proper attention and work carried out by authorised applicator only.Main portion of roof treatment shall be commenced only on completion of corners/ edges/ junctions. (d) APP membrane shall be taken upto outside of the parapet wall to an extent of 150mm minimum. (e) Ensure while laying the treatment no bulging on surface/voids shall be found and proper care/attention be given for the treatment. (f) If any work executed at site without any authorised applicator, the same shall be rejected and no payment shall be made. (g) Codntractor shall produce the certificate from the manufacture for the authorised applicator before commencement of work.

Fixing only chain link MS galvanisd fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire

S&F 2nd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Supply only chain link MS galvanised fencing, any size and type to Complete all as specified and directed.

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

M&L for preparation of new wooden Surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors to set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl screed bed 15mm thick in CM 1:4, complete all as specified and directed.

S&F in repair 15mm dia Bib taps fancy type CP, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15mm dia Pillar laps, cast copper alloy, with capstan heads, chromium plated fancy type , screwed down high pressure, with or without lettered 'Hot1 or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm dia Stop valves, cast copper alloy fancy type CP with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 15mm dia angle Stop cock, cast copper alloy fancy type CP, screwed down, high pressure, with crutch or butterfly handle, screwed one end for iron pipe and other end for PVC connection pipe complete all as specified and directed.

S&F in repair 10ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair 20mm size Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed Complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples or wooden beads Complete all as specified and directed.

Resecuring or easing & adjusting without taking down shutters of any description exc 2 sqm each complete all as specified and directed.

S&F (in repair) 100 mm Aluminium anodised tower bolts of extruded section including screws complete all as specified and directed.

S&F (in repair) 150 mm Aluminium anodised tower bolts of extruded section including screws complete all as specified and directed.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F (in repair) 75mm size butt hinges stainless steel medium weight complete all as specified and directed.

S&F (in repair) 100mm size butt hinges stainless steel medium weight complete all as specified and directed.

S&F (in repair) 100mm size Aluminium handles, cast type, anodized complete all as specified and directed.

S&F (in repair) 150mm size Aluminium handles, cast type, anodized complete all as specified and directed.

S&F 15mm bore Tubes,'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down complete all as specified and directed.

S&F 20mm bore Tubes,'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down complete all as specified and directed.

M/S TANUSHREE CONSTRUCTION COMPANY

shree nathji trading corporation

M/S Badri Electicals