SPECIAL REPAIRS TO DSC BILLET (OLD MI ROOM ) AND ALLIED TEMPORARY BUILDING AT 2 WEU

Amount

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area n.exc 1.5 Sqm each, complete all as specified and directed

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but n.exc 4 Sqm each, complete all as specified and directed

Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat complete.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards any thickness and in any position including cover fillets complete all as specified and as directed by Engineer-in-Charge.

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified

S&F second class hardwood plain, solid, straight chowkhats and frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and as directed by Engineer-In-Charge.

S&F solid PVC door frames of sizes 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed.

S&F 40 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35 mm thick second class hardwood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass / gauge, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkhats complete.

S&F Factory Made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and ........................

...................... plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & sketch shown under section 8 of SSR Part II.

S&F Mild steel flat iron as in hold fast and similar work fixed to chowkhat complete confirming to Fe-290 Gde E-165 all as specified and as directed by Engineer-In-Charge.

M&L for PCC 1:3:6 type C1 using 20 mm graded stone aggt for fixing of hold fast & cills,hold fast etc

S&F, butt hinges, medium weight, cold rolled, mild steel of size 75 mm complete all as specified and directed.

S&F butt hinges, medium weight, cold rolled, mild steel of size 100 mm complete all as specified and directed.

S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed

S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 100 mm and fixed complete all as specified and directed

S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F in repair extruded aluminium alloy handles, fabricated type, anodised of size 100 mm complete all as specified and directed.

S&F in repair 50 mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel spring complete all as specified and directed.

S&F 300 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete.

S&F Stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete.

M&L for preparation of new steel surfaces, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide all as specified and as directed by Engineer-In-Charge

M&L for preparation of new wooden surface of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer.

M&L for Gypsum Board 12 mm thick for seamless false ceiling fixed with screw over and including Gl frame work comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners ........

Item No 24 Contd... with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre all as per manufacturer instruction including applying two coat of Distemper oil emulsion over one coat of primer after perparation of surafec complete.

Demolition of brickwork or stone boulder / PCC Block masonry, built in cement mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework & precast concrete articles

M & L for precast cement concrete (1:5:8) (using 20mm graded stone aggregate) solid building blocks exe 10 cm thick, in width (with plain or inter locking joints as directed) setting in CM 1:6 complete in wall or pillars all as specified and directed.

Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, Including removal of debris to a distance exc 100 m but n.exc 250 m all specified and directed.

M&L for 10 mm thick rendering in cement mortar 1:6 on brick or concrete surfaces of walls, finished even and smooth without using extra cement, complete.

M&L for 5 mm thick rendering in cement mortar 1:4 (as second coat), over and including 10 mm thick rendering in cement mortar 1:6 (as first coat) on brick masonry wall surface, including mixing only liquid water proofing compound in second layer only as per manufacturers instructions, finished the surface even & smooth without using extra cement complete all as specified and directed. Note:- WPC will be measured & paid separately

Supply only Liquid water proofing compound.

M&L for preparation of plastered surface of walls including plaster / cornices etc and applying two coats of oil bound distemper over one coat primer over and including 3 mm thick cement base wall putty applied as per manufacturar's instruction complete

M&L for complete removal of existing treatment of old surfaces of walls including brooming down / steel wire brushing, scrapping down smoke soot etc, preparation of surfaces and applying two coat of Distemper oil emulsion over a coat of primer over and including cement base wall Putty complete all as specified and directed by Engr-in-charge.

M&L for complete removal of existing treatment of old external surfaces of walls including brooming down / steel wire brushing, scrapping down smoke soot etc, preparation of surfaces and applying two coats of weather proof acrylic based exterior emulsion paint (100% acrylic) over one coat of primer as per manufacturers instructions complete all as specified and directed by Engr-in-Charge. Make :- Nerolac(Exel), Asian Paint (Apex ultima), Dulux (weather shield water proof), Berger (weather coat all guard).

M&L for preparation of new plastered surfaces of walls and applying two coats of weather proof acrylic based exterior emulsion paint (100% acrylic) over one coat of primer as per manufacturers instructions complete all as specified and directed by Engr-in-Charge. Make :- Nerolac(Exel), Asian Paint (Apex ultima), Dulux (weather shield water proof), Berger (weather coat all guard).

S&F of rolled MS Roof trusses (framed), trussed, purlins, crane gantries, rails, post, and fastenings, heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. using steel section confirming to Fe-410-W (Gde-E-250) quality A

S&F mild steel gusset plates ( plain or chequered ) channels, square cut or notched ( ordinary and counter sunk) forming holes without any attachment conforming to Fe - 410-W ( Gde-E-250) quality - "A" complete

Dismantling of plain or corrugated sheet sheeting of any gauge, thickness, or similar pattern roof covering.

S&F 0.50 mm thick Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall or roof, fixed with self driven / tapping screws as specified and as directed by Engineer-in-charge

S&F 0.50 mm thick Pre- painted galvatume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in ridge / roof covering / cladding to wall or roof, fixed with self driven / tapping screws as specified and as directed by Engineer-in-charge

M&L for providing cement concrete 1:2:4, type B0, using 12.5 mm graged aggregate as in lintel up to 1.5 m clear span, cill, staps, seismic, and other similar bands, plinth courses, parapets and railing up to 60 cm height , coping, bed block & similar complete including necessary formwork all as specified and as directed.

S&F mild steel work as in wind tie of flat iron including all necessary drilling hole and bolting complete using steel section confirming to Fe-290 Gde E-165

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fixed with washers and one hexagonal or square nut, exc 450 mm long and 16 mm dia of shank.

M&L for cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) 25mm thick as in leveling course of flooring & roof complete all as specified and directed.

M&L for light / dark shade colour (tiles shall be laid in pattern as approved by GE, using two or more colour tiles), vitrified ceramic tiles 9-10 mm thick (square / rectangular) polished, area of each tiles n.exc 0.36 sqm in floors etc laid over and including 15 mm thick screed bed or bedding layer in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for light / dark shade colour (tiles shall be laid in pattern as approved by GE, using two or more colour tiles), vitrified ceramic tiles 9-10 mm thick (square / rectangular) polished, area of each tiles n.exc 0.36 sqm in floors etc laid over and including 10 mm thick backing coat CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Demolition of cement concrete of any description as in position not otherwise specifically provided for complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in plinth protection protection including finished even and smooth without using extra cement and all as directed by Engr-in-charge.

M&L for Non skid, joint free (edge cut) coloured ceramic tiles 8 to 10 mm thick (Square) polished area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.

M&L for joint free (edge cut) coloured glazed ceramic tiles of size 300 mm x 450 mm x 7 mm to 8 mm thick as in skirting / dado etc laid over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.

M&L for 100 mm thick cement concrete 1:4:8, type D-2,(using 40 mm graded stone aggregate) as in Sub base for path / flooring complete all as specified and as directed.

Material & Labour for machine pressed precast concrete interlocking paver block of approved shape and size of 60 mm thickness, with minimum compressive strength of 35 N / Sqmm (M-35 grade), without correction factor for chamfering, made in rubber moulds with 0.50 mm thick scratch proof lacquer coating on top surface, with white cement and pigment laid over and including 20 mm thick (compacted thickness) sand cushning bed complete

Supply fabricate & fix in position aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 5 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below, including taking down old window complete all as specified and directed. (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20831) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20832)...

...(c) Top & side Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 mm (Section No 20738) (d) Shutter Interlock Section shall be of size 18.00 x 40.00 x 1.45 mm (Section No 20737) (e) Bottom Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 mm (Section No 20736) Note:- Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx B

Supply and fix in repair 1000 litres capacity double layer, rotational moulded, polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size all balves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete.

Supply and fix in repair 500 litres capacity double layer, rotational moulded, polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size all balves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete.

S&F in repairs stop valves cast copper alloy 15 mm dia screwed down, high pressure with crutch or butter fly handle, screwed both ends, fixed.

S&F in repair 15 mm size bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete.

Supply & fix 0.90 mm thick Decorative laminate type 1 of surface finish, colour parttern as approved, fixed with approved adhesive as per manufactures instruction complete all as specified and directed by Engr in Charge . Make : Sunmica, Formica, Century liminates.

S&F in repairs white vitreous China urinal bowl flat back of size 465 mm x 355 mm x 265 mm, (excluding flushing cistern,) with PVC discharge pipe, providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, including cast copper alloy chromium plated urinal spreader complete.

S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat, white, closed pattern with flat bottom, and cover with aluminised hinging device, including all connection complete.

Supply and fix in repair white vitreous China wash hand basin (Flat back) of size 580 x 450 mm fixed on and including new brackets complete including, 32 mm size brass chromium plated waste coupling, 750 mm long PVC waste pipe, PVC connection pipe, 15 mm size and 450 mm long with PTMT nuts and washer at both end etc complete.

Supply and fix in repairs 10 Litre capacity PVC symphonic action type flushing cistern (ISI Marked) low level with inlet ball valve, float, handle, & flush pipe fixed in position and connecting complete.

S&F in repair PVC Connections 15 mm size with PTMT nuts of length 450 mm complete all as specified.

S&F in repairs 15 mm size pillar taps cast copper alloy with capstan heads fancy type chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes

S&F towel rail aluminum anodised 20 dia

S&F in repair fancy type chromium plated shower rose with swivel joints, 50 mm dia including fixing to 15 mm bore steel pipe or union.

S&F in repairs stop cock chromium plated fancy type with long shank and cup (concealed type) with capstan head, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed complete, all as specified.

S&F in repairs chromium plated fancy type angle valve with capstan head, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed complete, all as specified.

Taking up or down 15 mm bore steel tubing and connections including cleaning, threading for refixing or removal to store, all as directed.

Taking down AC or PVC rain water pipes and fittings set in cement of adhesive.

Supply and fix 15 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line all as specified and as directed by Engineer-in-Charge.

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length, jointed with rubber ring joints, fixed on walls or floors with clamp complete all as specified and as directed.

S&F PVC (SWR) pipes 75 mm dia single socketed, in any length, jointed with rubber ring joints, fixed on walls or floors with clamp complete all as specified and as directed.

S&F PVC (SWR) plain bend 110 mm dia, of any radius with solvent cement joints, complete all as specified and as directed

S&F PVC (SWR) plain bend 75 mm dia, of any radius with solvent cement joints, complete all as specified and as directed

S&F PVC (SWR) vent cowl 110 mm dia all as specified and directed

S&F 110 mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed.

S&F stainless steel Chromium plated grating 75 mm dia.

S&F in repair 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement, with sorrounding cement concrete 1:2:4 type B1 complete all as specified

Demolition and breaking up 150 mm dia bore salt glazed stoneware drain pipe / RCC hume pipe including PCC packing under haunching against the sides of pipe bed and complete PCC of bed all specified and directed.

Supply & laying 150 mm dia Reinforced cement concrete pipes, class NP2, laid and jointed with or without collars laid in trenches and jointed in cement mortar 1:1 complete.

M & L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in bedding including haunching & packing under and against the side of drain pipe 150 mm bore, after they are laid and tested complete

M&L for Pre cast RCC 1:2:4 type B1 using 20 mm graded stone aggregates as in cover slab for soakage well / manhole and similar works supported on walls and set in cement mortar 1:4 complete. Note:- Reinforcement steel will be measured & paid separately

M&L for steel reinforcement of TMT bars (Fe-550 / 550 D Grade) 10 mm dia and over cut to length and bent to shape required including cranking bending spirally, hooking end and binding with mild steel wire (annealed ) not less than 0.9 mm dia or securing with clips all as specified and directed.

M&L for Granite stone slab 15 to 18 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with granite shade, laid over and including 15 mm thick cement screed bed in CM 1:6 complete.

Excavation in trenches not exceeding 1.50 m wide and not exceeding 1.50 m in depth for foundationn etc., or for shafts, wells, cesspits, manholes, pier holes etc., not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in any type of soil complete, all as specified.

Returning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm thick using excavated soil all as directed

Removing excavated Soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Taking down carefully (copper / aluminum) point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed.

Taking down carefully by unscrewing from main switch boards/cut out boxes/MCB DBs / complete sealing the cable end and making good disturbed surface by walls etc.

Taking down carefully by unscrewing from fitting and fixtures such as ceiling fittings,bulk head fittings, tube light fittings , street light , LED lights etc all as specified and directed.

Taking down old unsv damaged ceiling fan, exhaust fan including connection cable, dismantling blades and removing fan and blades to stores yard

Supply and fix exhaust fan 300 mm sweep AC, 240 volts, metal body, industrial exhaust fan fixed as per manufacturer instruction, connecting with and including 1.5 Sqmm copper conductor, PVC insulated and PVC sheathed three core cable including making suitable size hole in brick / PCC block / stone masonry wall built in cement mortar and making good disturbed surface complete.

Material & Labour for concealed point wiring for one light / Fan point controlled by one, one way switch complete with 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable 1100 volts grade ISI marked drawn through and including Heavy duty PVC rigid conduit not less than 20 mm dia, including all accessories like bend, tees, junction boxes etc. including 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable as a earth wire connected to common earth dolly, etc excluding flush box suitable for modular switches complete.

Note: Quoted rates shall be deemed to be Included for cutting chease for ceiling rose / Conduit etc and making good disturbed surface.

All as per item No 94 above but point wiring for one 5 Amps socket outlet on same board controlled by one-way switch.

All as per item No 94 above but point wiring for one 5 Amps socket outlet on independent board controlled by one-way switch.

All as per item No 94 above but wiring with 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable and 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable as earth wire connected to common earth dolly for 15 Amps multipurpose socket outlet on independent board, controlled with one way switch.

All as per item No 94 above but wiring with 4 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable and 4.0 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable as earth wire connected to common earth dolly for 15 Amps multipurpose socket outlet on independent board, controlled with one way switch.

S&F 2 module module cover plate with frame complete.

S&F 3 module module cover plate with frame complete.

S&F 4 module module cover plate with frame complete.

S&F 6 module module cover plate with frame complete.

S&F 8 module module cover plate with frame complete.

S&F sunken type sheet metal Flush box fabricated with 1.5 mm thick sheet for 2 module, fixed concealed in the wall complete.

S&F sunken type sheet metal Flush box fabricated with 1.5 mm thick sheet for 3 module, fixed concealed in the wall complete.

S&F sunken type sheet metal Flush box fabricated with 1.5 mm thick sheet for 4 module, fixed concealed in the wall complete.

S&F sunken type sheet metal Flush box fabricated with 1.5 mm thick sheet for 6 module, fixed concealed in the wall complete.

S&F sunken type sheet metal Flush box fabricated with 1.5 mm thick sheet for 8 module, fixed concealed in the wall complete.

Supply and fix modular type white switch, 230 volts, single pole one-way 6 Amps in 1 module

Supply and fix modular type white socket 3 pin cum 2 pin, 6 Amps 230 volts in 2 modules

Supply and fix modular type white switch, 230 volts, single pole one-way 16 / 20 Amps in 1 module

Supply and fix modular type white socket 3 pin cum 2 pin, 16 Amps 230 volts in 2 modules

Supply and fix modular type white step type fan regulator 230V of 100 / 300 watt in 2 modules, hum free complete.

M & L for Lamp holder Polycarbonate type with back plate suitable for batten fitting AC 230 Volts, single phase complete.

Material & Labour for concealed type sub main wiring with 2 run single core multistranded copper conductor cable, of size 4 Sqmm, PVC insulated, unsheathed, fire retardant, low smoke (FRLS) drawn through and including PVC conduit heavy duty, not less than 20 mm outer dia & 1.4 mm wall thickness, with all necessary fitting and including one run single core multistranded copper conductor cable, of size 4 Sqmm, PVC insulated, unsheathed, fire retardant, low smoke (FRLS) as earth wire, fixed on wall / ceiling complete.

Note: (i) 2 Runs of main cable and one run earth wire with conduit will be measured as one RM for payment. (ii) Quoted rates shall be deemed to be Included for cutting chease for Conduit etc and making good disturbed surface.

Material & Labour for concealed type sub main wiring with 2 run single core multistranded copper conductor cable, of size 6 Sqmm, PVC insulated, unsheathed, fire retardant, low smoke (FRLS) drawn through and including PVC conduit heavy duty, not less than 25 mm outer dia & 1.6 mm wall thickness,with all necessary fitting and including one run single core multistranded copper conductor cable, of size 6 Sqmm, PVC insulated, unsheathed, fire retardant, low smoke (FRLS) as earth wire, fixed on wall / ceiling complete.

Note: (i) 2 Runs of main cable and one run earth wire with conduit will be measured as one RM for payment. (ii) Quoted rates shall be deemed to be Included for cutting chease for Conduit etc and making good disturbed surface.

Taking down carefully (copper/aluyminium ) submain wiring complete of any type (batten/surface conduit or concealed ) etc complete and making good disturbed surface of wall,floor or ceiling with plaster of tiles or roof treatment etc and finishing the surface with distemper white washing / colour washing to match with the existing surface complte all as specified and directed.

M&L for distribution board (DB), double door type made out of sheet metal enclosure (CRCA sheet) dust and vermin proof MCB DB, TPN 4 way with 200 Amps rated copper busbar, 415 Volts with in built MCCB 63 Amps,4 pole 10 KA, 01 No., earth bar IP 43 protection, flush to wall complete all as specified and directed. Make : Legrand Model: 607792 or equivalent in L & T (Hager) / Schnieder (Multi-9).

M&L for distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 8 way with 200 Amps rated copper busbar, neutral bar, earth bar, IP 43 protection, single pole and neutral 250 Volts, flush to wall complete all as specified and directed. Make : Legrand Model: 607717 or equivalent in L & T (Hager) / Schnieder (Multi-9).

Supply and fix MCB’s single pole 6-32 Amps, 230 volts with ‘B’ curve, fixed in sheet metal board complete including connecting.

Supply and fix MCB’s single pole & neutral, 63 Amps, 230 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.

M & L for earthing with SAFE EARTHING ELECTRODE (S.E.E) conforming to IS :3043-1987 with zinc coated earthing electrode with coating thickness of 100 microns using pipe in pipe technology method with 3 Mtr long, 42 mm inner dia and 76 mm outer dia GI rod connected with and including 25 mm x 3 mm size GI strip upto 7.5 m, fixing of electrode by boring 150 mm dia hole up to 3.30 meter depth in any type of soil with mechanical apparatus, returning filling with back fill compound(BFC) 2 x 25 KG compound bags including GI tubing 40 mm dia with necessary fittings light grade as protection to GI strip complete..............

......................with FRP earthing protection chamber along of size 420 mm x 420 mm at top, 340 mm x 340 mm at bottom, height 210 mm with FRP chamber cover and including FRP Earthing result display board of size 254 mm x 380 mm made out of plastic material showing the information replated to type of earthing, earthing result, due date of testing etc along with fixing stand 610 mm height made of angle ironas per manufactures instruction and as specified and directed by Engg - in- charge. Make:- POWERTRAC McML Earthing solution / Ashlock

S&F industrial type plug & socket board SP & N enclosure with 1 pole and earth metal plug & socket complete with 10 Amp MCB SP, Make:- Legrand cat part No : 607841 or equivalent in L & T (Hager) / Schnieder (Multi-9).

Supply and fix 35W LED building security light luminaire complete with pressure die cast aluminium housing and prismatic poly carbonate cover to ensure better uniformity of light distribution fixed on bldg wall surface including provison of new GI pipe bracket 40mm dia minimum 1.5 mtr long along with 2 Nos clamps complete all as specified and directed by Engr-in-charge.

S&F in repair energy efficient LED tube light fitting integrated batten type with built in LED Chip & integral LED driver 10 watt, channel housing & diffuser of length 600 mm (approx.) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge.

S&F in repair energy efficient LED tube light fitting integrated batten type with built in LED Chip & integral LED driver 20 watt, channel housing & diffuser of length 1200 mm (approx.) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge.

Supply and fix Plastic louvers for Exhaust fan along with connected accessories for 200 mm and 300 mm dia sweep exhaust fan all as specified and directed by engg -in-charge

Supply and fix ceiling fan five star rated of 1200 mm sweep compete with blades, down rod and canopy without regulator etc including hanging in position and connecting with 3 core, 0.50 Sqmm copper conductor PVC insulated and PVC sheathed round cable from ceiling rose to fan complete all as specified and directed.

Supply and fix in repair wall mounted Cabinets Made with Metal Textured polyester coating providing excellent corrosion and scratch resistance front door Openable along with inbuilt accessories made as per IP- 55 standard along with (a) inbuilt one two pole contactor of 25 Amp rating make BCH Cat part No :- CPG 216, (b) one nos 32 Amp two pole MCBs (c) one No 32 amp single pole MCB, the box size will be 200 mm x 200mm x 150 mm ( H X W X D) BCH cat No :- BIL - 50000 with inbuilt timer clock type Make L & T , GIC :- cat Part No :- J-648B-1 complete all as specified and as directed by Eng-In-Charge. Make:- BCH or equivalent in GE / Klinkmanan / Hanywell / Wipro

Supply & lay XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable ISI marked with aluminium multistranded conductor 1100 volt grade of size 16 Sqmm 4 core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing etc including taking down old cable complete all as specified & directed by Engr -in-charge.

S & F GI pipe light grade 80 mm dia as protection to cable along the pole / across road crossing / through culvert / passing through ceiling / walls with necessary clamps-02 Nos (Flat iron 50x6mm) with ,nuts and bolts complete all as specified and as directed.

M&L for providing dry river sand as in sand cushioning below and above cable of the thickness specified in SSR to under ground electric cable including punning down of sand in layer all as specified and directed by Engg-in-Charge. Note: for measurement purpose punned thickness of sand only will be considered.

Supply and laying reinforced precast concrete cable cover, class LV Type 2, flat, size 300 mm x 180 mm x 40 mm complete.

SURESH ELECTRICALS

MAHENDRA ENTERPRISE