BPCL HAZIRA DEPOT: GROUND FLOOR RENOVATION WORKS

Item | Description | Unit | Quantity | RATE

1 | BRICK MASONRY SUPER STRUCTURE: Providing and laying Brick work with bricks having compressive strength not less than specified and conforming to BIS std. of specified class and above, satisfying efflorescence, water absorption and dimension test as per IS code) in foundation and plinth in Cement mortar 1:5 (1 cement: 5 Coarse sand) as per specifications in one or more brick thickness including soaking of bricks, providing openings, recesses, scaffolding, staging, curing, finishing the joints flush below ground level and raking out joints etc. all complete, as per directions of Engineer-in-charge.CL 40 | M3 |

2 | SMOOTH PLASTER 12MM THK: CEMENT PLASTER Providing cement plaster finished including cleaning, hacking of base surfaces, scaffolding, curing, finishing etc. all complete for all heights as per specifications and directions of Engineer-in-charge including grooves, bands, drip moulder where ever required as specified. also including providing 20 gauge chicken wire mesh stretched tight at all RCC/ PCC and masonry meeting points in 300mm wide strips (150mm on each surface) fixed with G.I. "U" type nails before plastering. (Payment will be made separately for chicken wire mesh). 12mm thick with 1:5 (1 cement: 2 parts of fine sand: 3 parts of coarse sand) | M2 |

3 | VITRIFIED TILE 600X600: Supplying and laying vitrified ceramic tiles with water absorption less than 0.08% and conforming to IS: 15622, of approved make, colour and design at all levels and locations using approved first quality tiles in flooring with or without spacers, laid over a bedding of cement mortar bed of mix 1:4 to achieve overall flooring thickness as 50mm and a backcoat of white cement slurry and joints filled with white cement mixed with matching pigment complete with all bye works like covering with plaster of paris, curing etc. at all leads and lifts and as per specification / instructions of the Engineer Incharge. Using 600mm x 600mm x minimum 10mm thk. | M2 |

4 | GRANITE SLAB 18MM BLACK: Providing and laying Granite flooring including flooring on kitchen counter slabs and wash basin counter slabs with 18mm - 20mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey/white cement slurry mixed with matching pigment, epoxy touch ups including rubbing, curing, and polishing to edges polishing to granolithic finish complete with Granite of any size, shape and shade | M2 |

5 | ACRYLIC EMULSION PAINT (INT): Preparing surface and painting of approved make, shade and quality in all heights of walls, ceiling, sun sheds fins etc. incl. providing scaffolding, pitting in plaster to be made good, cleaning with coir brush & sand paper, curing and supply of all materials and labour complete. The finished surface shall be even and uniform. The application of paint shall conform to Manufacturer's recommendation and as per the directions of Engineer-in-Charge. 2 coats ACRYLIC EMULSION | M2 |

6 | GYPSUM BOARD 12.5MM: Supplying and fixing in position seamless false ceiling with 12.5mm thick Gypboard of India Gypsum, with standard and approved GI supporting arrangement suspended from RCC slab with all accessories such as screws, cleats, adjustable suspension rods, runners and Tees etc. including making suitable openings for air-conditioning grill, light fittings, troughs etc., and painting false ceiling board with two coats of approved make and shade acrylic/plastic emulsion paints over and a coat of primer complete with all bye works at all locations and heights including corbelling/moulding etc. with extra runners, using tape etc. to give a seamless look and as per drawings and manufacturers specifications and instruction of Engineer Incharge. | M2 |

7 | POP PUNNING: Preparing surface and painting of approved make, shade and quality in all heights of walls, ceiling, sun sheds fins etc. incl. providing scaffolding, pitting in plaster to be made good, cleaning with coir brush & sand paper, curing and supply of all materials and labour complete. The finished surface shall be even and uniform. The application of paint shall conform to Manufacturer's recommendation and as per the directions of Engineer-in-Charge. Pasting of Plaster of Paris/putty for uniform finish | M2 |

8 | ANOD AL.GLZ DOOR 12MM TOUGHENED: Supplying & fixing toughened glass of approved make of following thickness in windows, doors, ventilators, partitions etc. with necessary clips, beadings, EPDM rubber/neoprene gasket etc. complete as per the directions of Engineer-in-Charge. Only the clear opening of glass shall be measured for payment. (Make: Modi, Saint Gobain or equivalent) 12mm thick | M3 |

9 | LOUVER GLASS ANODIZE (ALUMINIUM WINDOW): Supplying and fixing heavy duty double action hydraulic floor springs of approved make with ISI mark and conforming to IS 6315, pivoting and all other arrangements including cost of cutting floors, S.S cover Plates with brass pivots etc. complete and other necessary accessories required for the works to facilitate smooth operation of the door shutter at all leads and lifts, all as directed by the Engineer-in-charge. Double action floor spring | SQM |

10 | DOOR WIN. - BRASS HANDLE: Providing and fixing bright finished brass handles with screws etc. complete 125 mm | EA |

11 | MORTICE LOCKS: Providing and fixing chromium plated brass 100 mm (depth 65mm) mortice latch and lock with 6 levers conforming to IS: 2209 inclusive of pair of handles of pressure die cast zinc alloy, satin finished of approved quality with necessary screws etc. complete. | EA |

12 | Laying of cable , wiring , fitting for split AC , fixing to the aluminium / glass / wooden door complete as per drawing, specifications including all labour, transporting etc. at all leads and lifts and as directed by the Engineer-in-charge complete. | EA |

13 | DISMANTLING - CEMENT PLASTER: Dismantling of existing old/deteriorated plaster or plaster skirting manually/ by mechanical means of any thickness in any position, raking out joints and cleaning the surface with wire brush including disposal of rubbish outside the premises to an unobjectionable place as per direction of Engineer-in-Charge. Note: The rates are applicable for all heights / depths and floors including scaffolding, etc. complete. | SQM |

14 | DISMANTLING - BRICK MASONRY: Dismantling brick masonry/reinforced brick masonry along with plaster in cement mortar manually/ by mechanical means and including stacking of serviceable materials and disposal of unserviceable materials outside our premises to an unobjectionable place as per direction of Engineer-in-Charge. Note: The rates are applicable for all heights / depths and floors including scaffolding, etc. complete. | M3 |

15 | DISMANTLING - TILES IN FLOOR AND W: Dismentlig of Existing Structures tiles/stone and debris outside the depot, or as advised by Engineering I/C | M2 |

16 | DISMANTLING - ROOFING SHEETS: Dismantling AC sheet cladding / roofing including ridges, pipes, valley gutters etc. and stacking the material as per direction of Engineer-in-Charge. Note: The rates are applicable for all heights / depths and floors including scaffolding, etc. complete. | M2 |

17 | PLMB SAN DISM n REFIX FITTINGS, SANITARY INSTALLATIONS n FITTINGS,DISMANTLING,Dismantling and refixing washbasin, sinks including waste fittings etc. | EA |

18 | DISMANTLE DOOR WINDOW: Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead | M2 |

19 | Wooden Partition Work: PARTITIONS Providing and fixing wooden partition including wooden frame 3" x 1-1/2" spaced at 600 mm c/c horizontal and vertical covered with 6 mm thick marine plywood on both the sides including one coat of primer n 2 coats of Oil bound distemper to our satisfaction. In First class Ghana teak wood | sqft |

20 | SnF SIDE SLIDING AUT SENSOR DOOR: Supplying n Installing of Single / Double leafed, single / double side sliding Automatic Sensor Door with 12 mm thick Toughened Glass of app. Make like Modi Float/Indo Asai etc. (Minimum opening of 1.2 mt.) along with side fins and Incl. locking arrangement on leafs / MS Channel / Hardware's n Consumables, Complete as per std. | sqft |

21 | BPG Glass work: CARPENTRY PARTITIONS Providing and fixing full height glass partitions made out of 3''x 3'' TW frame and 12mm thick clear glass of Modi float or approved equivalent make. The rate to include vertical door frame of 3'' x 3'' TW sections wherever required, 1/2'' x 11/4'' TW beading to hold the glass. All the exposed wood work to be finished in 3 coats of melamine polish and the frame to be fixed to the ceiling with 3'' x 3'' salwood sections from inside the false ceiling to support the frame etc. complete. | sqft |

22 | Interior Work:pop, wooden , lightning ,wallpaper,etc Providing maintenance services of Civil/Plumbing/Sanitary/Drainage/Carpentry/Interior and associated works. Deployment of Carpenter (1 no. skilled and 1 semi skilled) and Plumber (1 no. skilled and 1 no. semi skilled) as per the qualification criteria and deployed schedule for carrying out the roles and responsibilities mentioned in the tender document. | M2 |

23 | Kota Stone Polish: Stone Kota Polish for the open area where applicable, tiling not required | M2 |

24 | Wooden Polish: Preparing surface and providing and applying with good quality french spirit polish to fine finish on wood work. Note: The rates are applicable for all heights / depths and floors including scaffolding, unless otherwise specified. | M2 |

25 | CUBBORD RECORD ROOM full lenghth and height & L shape officer record room | cuft |

ELECTRICAL WORK

Item | Description | Unit | Quantity

PT WIRING SWITCH LT /FAN | "POINT WIRING: Supply & Laying primary Point Wiring from Switch Board to the lighting Fixture/Ceiling Fans Exhaust Fans/Call Bell lamps/ by means of 3 runs of 1.5 sq.mm. PVC FRLS 650 Volts/1100 Volts grade ISI approved & ISI marked. PVC Insulated Stranded copper Conductor through Surface GI 25mm Conduits (Job includes supply and installation of conduits with accessories) in an approved manner. This Shall Include the supply & Installation of Single Pole 5-Amps Modular Switch of approved Made in modular recessed box complete with all labour and materials for the following distances Upto 3 mts" | EA |

6A SOCKET SWITCH | "Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5A Sockets" | EA |

6/16A SOCKET SWITCH | "Supplying and fixing following modular base & cover plate for on existing modular metal boxes etc. as required. 8 Module (125mmX125mm)" | EA |

WALL MOUNT FAN 14" | "Supply & installation of specified sizes of wall mounted type fans operating on 240 V AC; Single phase & connecting to nearest 5A socket of the following sizes: 14"" sweep wall mounted fan" | EA |

EXHAUST FANS 305MM | "Supply and Installation of following types / sizes of single phase; 240 V AC, 50 hz fans of approved makes as per directions of Engineer-in-Charge; 230 V, single phase, 1500rpm, heavy duty, axial flow industrial exhaust fans with FRP louveres 300mm" | EA |

LED TUBE 1x18 AD | "Supply & Installation of LED TUBE LIGHTS complete with fittings with specified Wattage. It should be made out of high quality materials and complying with industrial standard practices to ensure high reliability and long life. The entire LED TUBE LIGHTS shall be capable of withstanding stresses and vibrations likely to be encountered in outdoor conditions by having necessary design/strength and protections inbuilt in its electronics within the specified electrical parameters of the product. TUBE LIGHTS should be provided with High quality long lasting PMMA poly acrylic front cover that should be distortion free, heat Resistant, Toughened, UV stabilized fixed to the extruded linear cast Aluminium frame. The LED light fixtures should be conforming to the standard specifications and indicative models. All fixtures should be provided with motion sensors for enhanced power efficiency. Batten type 1x18 Watt surface mount LED tube light with acrylic dissipator" | EA |

4'' PVC PIPES OF 6KG /SQCM | "Supplying and laying HDPE pipes of heavy duty conforming to IS code 4984 with all necessary fittings such as bends, unions (flanges for pipe size above 50mm), clamps, fixtures, etc., including necessary earthwork, painting, threading etc., complete as per specification (including concealing below floor/ ground, laying in a layer of sand, necessary painting with two coats of anticorrosive black bitumastic paint over a coat of approved primer, etc.) 100mm" | MTR |

TELEPHONE WIRING 5P | "Supply and laying of 5 pair standard telephone cable from exchange KRONE box to individual telephone sockets through already laid PVC pipes and connection at both ends" | M |

CAT6 CABLE | "Supply and laying of CAT6 data cable from HUB to individual RJ 45 sockets through already laid PVC pipes and connection at both ends using crimping tool" | M |

PT WIRE 3 run 4mm2 | "Supply and laying two runs of 4 sqmm and one run of 2.5 sqmm FRLS PVC copper wire 650 Volts/ 1100 Volts grade from MCB DB to individual switch boards for sourcing 15A independent switch sockets for raw and UPS power in already laid conduits complete including hook up at both ends" | M |

PVC CONDUIT 32MM | "Supply and laying of 2mm thick PVC approved make pipes inside roof concrete during pouring of concrete including placing of all accessories like fan hooks, junction boxes, bends etc. and wall casing using machine chiselling, fixing pipe and making good the cuts complete. 32 mm PVC conduits 2 mm thick" | M |

S. No. | Product Description | UOM | Qty

1 | WC EUROPIAN: Supplying and fixing white glazed vitreous china European water closet with ISI mark conforming to IS 7231 - Studio type with cistern (EWC) of superior quality 81cm high, double trap syphonic pattern, 'P' or 'S' trap, with low level 10 litre low level white P.V.C. cistern with cover with siphon and standard flush fittings, with specified color solid plastic seat cover & lid of superior approved quality, CP brass bar hinges, screws, bolts, rubber, buffers 15mm dia PVC inlet pipe connection and CP brass angle stopcock fixing EWC to floor with necessary brass screws, all complete at all leads and lifts as per drawings, specifications and instructions of the Engineer Incharge. | EA |

2 | HEALTH FAUCET: Supplying and fixing CP brass health faucet with 8mm dia, 1m PVC tube and wall hook at all leads and lifts as per drawings, specifications and instructions of the Engineer Incharge. | EA |

3 | MIXER BIB COCK 15NB: Providing and fixing C.P. brass long body mixer bib cock for hot and cold water, of approved quality conforming to IS standards and weighing not less than 690 gms. 15NB | EA |

4 | LAB SINK 450x300x150: Providing and fixing white vitreous china laboratory sink with CI brackets; CP brass chain with rubber plug 400 mm CP brass waste and 40 mm CP brass trap with necessary CP brass unions complete including painting of fittings and brackets; cutting and making good the wall wherever required. Size 450 x 300 x 150 mm | EA |

5 | WASH BASIN 550x400MM: Supplying, fitting and fixing white glazed vitreous china wash basin of superior quality with ISI mark having single or double holes with 15 mm CP brass pillar tap, CP brass chain and plugs, 32mm CP brass waste coupling, 32mm CP Brass Bottle trap and unions, 32mm dia PVC flexible waste pipe, 15mm PVC inlet water pipe connection, CI cantilever brackets embedded in 1:2:4 concrete, 15 mm CP brass angle stopcock, etc. filling the gaps between basin and wall with white cement etc., pedestal, all complete at all leads and lifts as per drawings, specifications and instructions of the Engineer Incharge. Flat back wash basin of size 550x400 mm | Nos |

6 | FLOOR TRAP 100MM OPN: Supplying and fixing Heavy Grade Cast Iron floor/Nahani trap of specified size with CP hinged heavy SS grating to be fixed in PCC M15 with 20mm down size aggregate and made water tight with all bye works complete as per the direction of the engineer. 100mm openable | EA |

7 | URINAL CHINA 580x380: Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. | EA |

8 | GM GATE VLV 40NB: Supplying, fitting and fixing superior quality gun metal gate valve (full way) of approved make with ISI mark as per specifications at all leads and lifts as per drawings, specifications and instructions of the Engineer Incharge. 40mm NB | NO |

9 | TOILET PAPER HOLDER: Providing and fixing toilet paper holder: Supply and Fixing CP Brass Toilet Paper Holder fixed into wall with CP Brass screws complete in all respects including cutting and making good the walls etc. | EA |

10 | ANGLE COCK 15NB: Points of approved quality conforming to IS:8931. 15NB | EA |

11 | HAND DRYER: Providing and fixing ABS body, no touch operating, fully hygienic automatic hand drier of approved make with single blower, with time delay, including providing necessary brackets, cable from drier to Plug, Plug top key and lock etc, complete as required. | EA |

12 | PVC PIPE PLUMBING Bathroom: Maintenance of Building as per scope of work and to the satisfaction of engineer incharge- Plumbing Jobs | ft |

13 | Mirror: Supplying minimum 6mm thick polished float glass mirror, bevelled edge, of approved make fixed to with 6mm thick marine plywood sheet backing with necessary beading, fixing arrangements all complete at all leads and lifts as per drawings, specifications and instructions of the Engineer Incharge. | Nos |