Construction of 4 Workshops, 8 Theory Room and Hall For I.T.I at Himatnagar Di .Sabarkantha

Construction of 4 Workshops, 8 Thoery Room and Hall For I.T.I at Himatnagar Di.Sabarkantha

BILL OF QUANTITIES

Percentage Rate Tender

Item Description of Item Quantity Unit Rate In Amount

1 Excavation for foundation upto 1.50 mt depth 1581.40 Cum 117.13

including sorting out and stacking of useful

materials and disposing the excavated stuff

upto 50 mt lead (A) Loose or soft soil.

2 Excavation for foundation 1.50 mt to 3.00 mt 322.00 Cum 162.29

depth including sorting out and stacking of useful

materials and disposing the excavated stuff upto

50 mt lead (B) Dense or hard soil

3 Filling in foundation and plinth with sand in 221.90 Cum 460.19

layers of 20 cm. Thickness including watering

ramming and consolidating etc. comp.

4 Filling available excavated Earth (Excluding 719.10 Cum 130.39

Rock) in trench plinth side of foundation . in

layer not excluding 20 cm in depth consolidation

each deposited layer by ramming and watering

5 Filling foundation and plinth with murrum or 944.60 Cumt 355.58

selected soil in layer of 20 cm in thickness

including ramming watering and consolidating

6 Anti Termite System P/L of Permenent piping 882.20 Sqm 134.33

technology Anti Termite treatment before

flooring work by installing LLDP (Low linear

density Polyethylene) tube of 8 mm O.D.&

mm I.D.With in Built Pressure Compenstaion chif

every 30 cm interval in the tube, having working

pressure of 2 kg/cm 2 and realese rate of

ltr/Hour fixed by P-Clip and nails . The LLDP pipe

shall be installed at the entire periphery of the

building and at internal network of building

depth of 20 to 200 mm under floor every 2 to

mtr.c/c distance (adjustble as per building layout

) & Ends of loop pass through a PVC Elbow of

minmum 32 mm ID at junction box of wall and

floor level, entring into a steel reinforcmed

grooved flexible pipe mini.22 mm LD leading into

junction box and during injecting chemicls for

termite control tretment. The anti-termite

chemical Lmidcloprid 30.5% SC Mix as per IS

6313(part-III) shall be injected by the pressure

pump diluted with water @ 10.5 ml/5ltr of water

at the rate of 2 kg/sq,cm.@ 5 ltr /Smt .the

contractor shall submit approved line plan for

piping system and junction boxes dully approved

By Engineer -in-charge with bond of 5 Years

Item Description of Item Quantity Unit Rate In Amount

7 Providing and laying controlled cement concrete 413.80 Cum 3860.15

M.150 for curing complete excluding cost of

formwork and reinforcement for reinforced

concrete work in (A) Foundations, footings,Base

of columns and Mass concrete For PCC

8 Providing and laying controlled cement concrete 582.40 Cumt 4927.79

M-250 and curing complete including the cost of

form work but excluding the cost of

reinforcement for reinforced concrete work in

Footing and Mass concrete

9 Providing and laying cement concrete 1:3:6 (1- 129.30 Cum 3005.76

Cement : 3- coarse sand : 6- machine cut stone

aggregates 40 mm nominal size) and curing

complete excluding cost of formwork in (A)

Foundation and Plinth

10 Providing and laying controlled cement concrete 47.50 Cumt 7406.33

M-250 and curing complete including the cost of

form work but excluding the cost of

reinforcement for reinforced concrete work in

(d) columns Up to Plinth level.

11 Providing and laying controlled cement concrete 81.90 Cumt 7351.79

M-200 and curing complete including the cost of

form work but excluding the cost of

reinforcement for reinforced concrete work in

Columns, pillars posts and struts up to F.FLOOR

12 Providing and laying controlled cement concrete 12.50 Cumt 7392.19

M-200 and curing complete including the cost of

form work but excluding the cost of

reinforcement for reinforced concrete work in

Columns, pillars posts and struts S.FLOOR

13 Providing and laying controlled cement concrete 219.30 Cum 6027.96

M-250 and curing complete including the cost of

form work but excluding the cost of

reinforcement for reinforced concrete work in

Ground & Plinth BEAMS

14 Providing and laying controlled cement concrete 140.90 Cumt 4120.80

M.150 and curing complete including the cost of

formwork and excluding reinforcement for

reinforced concrete work in (C) Plinth Slabs

15 Providing and laying controlled cement concrete 211.00 Cumt 6070.10

M.200 and curing complete including the cost of

formwork and excluding reinforcement for

reinforced concrete work in (C) Up to F.Floor

16 Providing and laying controlled cement concrete 5.90 Cumt 6110.50

M.200 and curing complete including the cost of

formwork and excluding reinforcement for

reinforced concrete work in (C) S floor Beams,

Item Description of Item Quantity Unit Rate In Amount

17 Providing and laying controlled cement concrete 16.80 Cumt 6367.04

M-200 and curing etc. complete including the

cost of form work and reinforcement for

reinforced concrete work in (c) Chhajja for Up to

18 Providing and laying controlled cement concrete 0.40 Cumt 6407.45

M-200 and curing etc. complete including the

cost of form work and reinforcement for

reinforced concrete work in (c) Chhajja for

19 Providing and laying controlled cement concrete 8.80 Cumt 6725.59

M-200 and curing etc. complete including the

cost of form work and reinforcement for

reinforced concrete work in (c) Lintal Up to F.

20 Providing and laying controlled cement concrete 0.20 Cumt 6766.00

M-200 and curing etc. complete including the

cost of form work and reinforcement for

reinforced concrete work in (c) Lintal for Second

21 Providing and laying controlled cement concrete 270.60 Cumt 6843.76

M.200 and curing complete including the cost of

formwork and excluding reinforcement for

reinforced concrete work in © Up to F floor Slab

22 Providing and laying controlled cement concrete 7.21 Cumt 6883.15

M.200 and curing complete including the cost of

formwork and excluding reinforcement for

reinforced concrete work in (C) S floor Slab

23 Providing and laying controlled cement concrete 9.00 Cumt 6853.86

M-200 and curing etc. complete including the

cost of form work and excluding the cost of

reinforcement etc. complete in (E) Stair case up

to floor two level for up to second Floor

24 Providing and laying controlled cement concrete 18.80 Cumt 9469.76

M.200 and curing complete excluding the cost of

formwork and reinforcement for reinforced

concrete work in (B) Walls, from top of

foundation level upto floor two level For up to

25 Providing and laying controlled cement concrete 3.40 Cumt 9509.15

M.200 and curing complete excluding the cost of

formwork and reinforcement for reinforced

concrete work in (B) Walls, from top of

foundation level upto floor two level For S.Floor

26 Extra for additional height of propping and 896.70 Sqmt 390.34

centering where the height of propping and

centering exceeds 4.00 mt. Between supporting

floor two ceiling including temporary brick or

stone pillars for supporting as required.

Item Description of Item Quantity Unit Rate In Amount

27 Providing and fixing M.S. grills of required 24.00 kg 101.23

pattern to wooden frames of windows etc. with

M.S. flats at required spacings and frame alround,

square or round bars with round headed bolts

and nuts or by screws (A)

28 Providing and fixing 90 cm high Stainless steel 33.00 Rmt 2240.18

railing made from anticorrocive 304 grade S S

pipe of 50 mm dia (16Gauge) as hand rail with S

S 304 grade Baluster of 35 mm dia (16Gauge) as

a vertical support fixed in RCC slab at 1.2m c/c

including three horizontal S S pipes of 25 mm

dia (16Gauge) at eqal distance fixed with

baluster including accessories as per detailed

drawing as directed etc. complete.

29 Providing T M T. bar reinforcement of Fe- 179731.92 Kg 76.26

500/500D for R.C.C.work including bending

and placing in position complete up to All

30 Providing and fixing eco-friendly light weight 178.80 Sqmt 1648.96

calcium silicate false ceiling tiles having Tegular

edge & 15 mm Thick Densified edges on the Tile

Periphery for Extra Strength The Light weight

calcium silicate ceiling tiles shall have, light

reflection 85% non-combustible as per B.S.

part IV, 100% humidity resistance and also

having thermal conductivity0.043° w/m KC.for

the best thermal Insulation. The Light weight

calcium Silicate tile shall be of approved texture

Fine fissured/ Spintone/ Cosmos having NRC

value of 0.5 & Globe having NRC value of

NRC or equivalent of size 595 X 595 mm to be

laid on true horizontal level suspended inter

locking metal grid of hot dipped galvanized steel

sections (galvanizing @120 grams per sqm

including both side) consisting of main ‘T’ runner

suitably spaced at joints to get required length

and size of 24 X 38mm made from 0.30 mm thick

(minimum) sheet, 1200mm centre to centre, and

cross ‘T’ of size 24 X 28mm made out of 0.33mm

(Minimum) sheet spaced 1200mm along spaced

between main 'T' at 600mm centre to centre to

form agrid of 1200x600mm and size 24x48mm

made of 0.30mm thick (Minimum) sheet to be

interlocked at middle of the 1200x600mm panel

to form grid of size 600x600mm resting on

periphery walls/partitions on a perimeter wall

angle pre-coated steel of size (24x24x3000mm

made of 0.40mm thick (minimum) sheet with the

31 Brick work using common burnt clay building 85.50 Cum 4021.02

bricks having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:6 (1- Cement : 6 -fine sand)(B)

Conventional below plinth

Item Description of Item Quantity Unit Rate In Amount

32 Brick work using common burnt clay building 889.50 Cumt 4289.27

bricks having crushing strength not less than

Kg/Sq.cm. in super structure above plinth level

upto floor two level in cement mortar 1:6

(1cement : 6 fine sand) Conventional Up to {First

33 Brick work using common burnt clay building 60.60 Cumt 4329.46

bricks having crushing strength not less than

Kg/Sq.cm. in super structure above plinth level

upto floor two level in cement mortar 1:6

(1cement : 6 fine sand)Conventional {Second

34 Half brick masonry in common brunt clay 59.00 Sqmt 599.84

building bricks having crushing strength not less

than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1-

Cement : 4 -coarse sand ) in foundation and

plinth (B) Conventional

35 Half brick masonry in common brunt clay 566.00 Sqmt 651.61

building bricks having crushing strength not less

than 35 Kg/Sq.Cm. in n super structure. (B)

Conventional for up to Fisrt Floor

36 Providing 15mm thick Smooth cement plaster in 3867.10 Sqmt 157.44

single coat on Rough (Similar) side of single or

half birck walls / concrete wall for interior

plastering and finished even and smooth in C M

1:4 (1 cement : 4 coarse sand) including (1x1)cm

groove at juction of structure etc. comp. For Up

37 Providing 15mm thick Smooth cement plaster in 312.90 Sqmt 180.24

single coat on Rough (Similar) side of single or

half birck walls / concrete wall for interior

plastering and finished even and smooth in C M

1:4 (1 cement : 4 coarse sand) including (1x1)cm

groove at juction of structure etc. comp. For

38 Providing 10 mm. Thick cement plaster in single 2042.20 Sqmt 144.17

coat for plastering on ceiling and soffits of stairs

and finished even and smooth in : (I) Cement

mortar 1:4 (1 cement : 4 sand) with 1x1cm

Groves at juction of structure member with

floting coat of neat cement slurry etc.

complete.up to F.Floor

39 Providing 10 mm. Thick cement plaster in single 46.70 Sqmt 166.97

coat for plastering on ceiling and soffits of stairs

and finished even and smooth in : (I) Cement

mortar 1:4 (1 cement : 4 sand) with 1x1cm

Groves at juction of structure member with

floting coat of neat cement slurry etc.

complete.S Floor

Item Description of Item Quantity Unit Rate In Amount

40 20 mm Thick Double coat sand faced Gutka 3668.50 Sqmt 305.81

cement plaster on walls upto height 10 meters

above ground level consisting of 12 mm Thick

backing coat of c.m. 1:3 (1 cement : 3 sand) and

mm Thick finishing coat of c.m. 1:1 (1 cement :

sand) with 1x1cm Groves at juction of structure

member etc. comp.etc. complete.

41 Providing throating or plaster drip and moulding 341.60 Rmt 41.03

to R.C.C. Chhajja.

42 Applying two coats of Birla or Asian acrylic lapy 6186.90 Sqmt 40.59

(putty) & two coats of primer of approved brand

and manufacture on new wall surface to give an

even shade including thoroughly brushing the

surface free from mortar dropping and other

foreign matter and sand papered smooth.

43 Wall painting (two coats) with plastic emulsion 4102.00 Sqmt 79.02

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including throughly brushing the surface free

from mortar droppings and other foreign matter

and sand papered smooth.

44 Wall painting (two coats) with plastic emulsion 2084.90 Sqmt 84.25

paint of approved brand and manufacture on

undecorated ceiling surface to give an even

shade including throughly brushing the surface

free from mortar droppings and other foreign

matter and sand papered smooth.

45 Finishing wall with weather proof exterior 100% 3656.00 Sqmt 70.24

acraylic emulsion paint on wall surface (two

coats) to give an required shape even shade after

thoroughly brushing the surface to remove all

dirt, and remains of loose powdered

materials.etc complete

46 Providing And filling with good quality 39.40 Cumt 469.65

cinder(steam coal) as directed by engineer in

charge in sunks in layers of 15 cm thick,including

watering,placing ,ramming well etc as directed,

47 Providing Water proofing Treatment on Sunk 137.20 Sqmt 353.20

Slab including cement concrete flooring 1:2:4 (1-

cement : 2-coarse sand : 4-graded stone

aggregate 20mm nominal size) laid in one layer

and finished with a floating coat of neat cement

average 50mm thick to Prepare slope including

water proofing chemical etc. Complete for Sunk

Slab All Floor.

48 Providing and laying controlled cement concrete 5.40 Cumt 6146.86

M-200 for RCC work and curing complete

including the cost of form work but excluding the

cost of reinforced concrete work in coping up to

Item Description of Item Quantity Unit Rate In Amount

49 Providing and laying controlled cement concrete 3.20 Cumt 6187.26

M-200 for RCC work and curing complete

including the cost of form work but excluding the

cost of reinforced concrete work in coping on

50 Providing and fixing and Furnishing ACP 28.00 Sqmt 3351.79

(Aluminium composite panelled )sheet on any

building element with all required G.I sheet at

top ,M.S angle of 50 x 50 x 3 mm size @ weight

2.3 kg/rmt apply at every 600mm c/c distance

in horizontal and vertical and support with

hollow M.s Pipe 15cm dia of 2mm thick @ weight

0.952kg/mt connected with 30 x 30x 5 cm M.S

plate @weight 3.92 kg/sqmt at bottom and top

with including one coat of primer of approved

quality and two coats of oil painting with cutting,

Fitting and all necessary fastener including all

fitting material, Hardwar finishing etc.

completed. As per directed engineer in charge.

51 Providing and fixing window having extruded 122.80 Sqmt 1583.95

aluminum Colour anodized section frame main

outer size 95mm x 24mm x 1.17mm (of Jindal

Section no:2459 @ wt.of 0.738 Kg/mt),

horizontal Three track member size 92mm x

31.75mm x 1.30mm (of Jindal Section no:8688,@

Wt.1.07 Kg/mt), vertical member of size 92mm x

31.75mm x 1.50mm (of Jindal Section no:8933,@

Wt. 1.06 Kg/mt) with sliding shutters of

horizontal member size 40 mmx18mm x1.29mm

(of Jindal Section no:8947@ wt.of 0.456 Kg/mt),

vertical member of size 40mm x 18mm x

mm (of Jindal Section no:8949 @ wt.of

0.456Kg/mt/ with 5 mm thick transparent

bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame

as per details completed.

Item Description of Item Quantity Unit Rate In Amount

52 Providing and fixing extruded aluminum window 24.30 Sqmt 2140.33

having extruded aluminum Colour anodized

section frame main outer size 127mm x

38.10mm x 1.35mm (of Jindal Section no:2443,@

Wt.1.384 Kg/mt),horizontal Four track member

size 122.20mm x 31.75mm x 1.10mm (of Jindal

Section no:8787,@ Wt. 1.205 Kg/mt),vertical

member of size 122.20mm x 31.75mm x 1.50mm

(of Jindal Section no:8935,@ Wt. 1.398 Kg/mt)

with sliding shutters of horizontal member size

40mm x 18mm x 1.29mm (of Jindal Section

no:8949 @ wt.of 0.456Kg/mt),vertical member

of size 40mm x 18mm x 1.29mm (of Jindal

Section no:8947 @ wt.of 0.456Kg/mt/Section

8948,@ Wt. 0.457 Kg/mt) with 5 mm thick

transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures

and transparent silicon sealant glass fixing to

frame as per details etc complete for window.

53 Providing and fixing 35mm thick Precast 92.90 Sqmt 2284.62

Concrete Jali with 75x25 M.S. Flat @ weight

kg Box grill including Rat Mesh for all ventilator

including cutting, welding and fabrication etc as

per detail drawing . complete as per directed

Engineer in charge

54 Providing & Fixing in position standard extruded 8.70 Sqmt 1993.74

approved colour anodized Aluminum Ventilator

Size as per design with outer frame 63.50 x

x 1.95 mm (of Jindal Section No.4605,@ Wt.

1.094 kg/Rmt ) with 5 mm thick bajari figured

adjustable glass louvers as shown in elevation

for as per detailed drawing as directed. For

55 Providing and fixing 35mm thick two Pivoted 11.30 Sqmt 3907.69

Wooden Flush dooor having teck wood Frame

size 63 mm x 50mm with both side lamination

also 35mm thick batten on wooden shutter. Door

shall be providing 30cm stainless 4 nos steel

handle,Floor 2 Nos spring heavy duty,2 Nos S.S.

Aldrop 30 Cm,2 Nos S.S. Stopper 30 Cm and

necessary fixtures & fastenings etc. including

with with 5 mm thick transparent bronze colour

tinted float glass with powder coated fittings

and fixtures and transparent silicon sealant glass

fixing to frame as per details etc complete

Item Description of Item Quantity Unit Rate In Amount

56 Providing and fixing 35 mm thick Double flush 36.00 Sqmt 4113.73

door shutter, solid core with Anodized

Aluminium section door section @ weight not

less than 1.1 kg/mt ) frame size 63.5mm x 38mm

inserted Non teak wood frame(50 x 35 mm)

inside the aluminium section for durable grip of

door hinges & single shutter with required

teakwood batten having 1mm thick lamination

on both side, Durable Grip shall be providing

with both side 15cm long stainless steel handle

and necessary fixtures & fastenings etc. directed

by engineer in charge.

57 Providing and fixing 35 mm thick single flush 33.60 Sqmt 3730.94

door shutter, solid core with Anodized

Aluminium section door section @ weight not

less than 1.1 kg/mt ) frame size 63.5mm x 38mm

inserted Non teak wood frame inside the

aluminium section for durable grip of door

hinges & single shutter with required teakwood

batten having 1mm thick lamination on both

side, Durable Grip shall be providing with both

side 15cm long stainless steel handle and

necessary ,fixtures & fastenings etc. directed by

engineer in charge.

58 Providing and fixing FRP door having frame size 9.20 Sqmt 2326.03

100 x 50 mm and 35 mm thick FRP depress panel

Double or Single shutter having extra

reinforcement on sides & edges in Gel coat

finish.The core of the both shutter & frame is to

be filed up with injected fire retradat grade

polyurethene foam done in situ along with

embeded wooden pieces for stiffening & also

taking hinges & fintures.The whole FRP frame &

double shutter is to be waterproof, weatherproof

,termite proof & resistance to mild

acid/alkali.Rates are to be inclusive of S.S hinges

with necessary screws & alluminum fixtures &

fastenings & fartener etc completed directed by

engineer in charge.

59 Providing and fixing rolling shutters of approved 25.30 Sqmt 3503.41

make made of 80 mm wide M.S. laths inter-

locked together through their entire length and

jointed together at the ends by end locks

mounted on specially designed pipe shaft with

bracket plates, guide channels and arragements

for inside and outside locking with push-pull

operation including the cost of hood cover and

spring etc. complete.(A) Shutters having width

Item Description of Item Quantity Unit Rate In Amount

60 Providing and fixing M S angle openable grilled 3.40 Sqmt 2676.50

Single shutter Door having 25 MM. x 50 MM x

MM size M.S. angled welded togather to make a

box frame and 20mm dia M.S. bars to be fixed

with it by drilling hole in the angle section and

welded at 10 cm C/C approx including anodized

iron fixtures & fastenings including primer coat

of approved quality and two coats of oil paint

etc., complet as per detail drawing as directed.

61 Providing and fixing in position collapsible steel 427.50 kg 5819.53

shutters with vertical channels 20 x 10 x 2 mm

braced with flat iron diagonals 20 x 5 mm size

with top and bottom rails of T_rin 40x 40 x 6 mm

with 38mm dia, steel pulleys complete with

bolts, nuts, locking arrangements, stoppers

handles including applying a priming coat of red

62 P & L 24" x 24" vitrified 8 mm thick tile flooring 215.40 Sqmt 1397.83

over 20mm (average) base of cement mortar 1:6

( 1 cement: 6 coarse sand) on new surface or

fixing on existing flooring by adhesive material

including dismentaling of

existing flooring and jointed with color cement

slurry including finised with flush pointing &

cleaning the surface etc. complete for antiskit

63 Providing and laying Vitrified tiles 8 to 10 mm 11.20 Sqmt 1141.45

thick , 24'' x 24'' in skrting risers of steps and

dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with white

64 P & L 60x60 cm' Polished vitrified 8 mm thick tile 515.80 Sqmt 1556.41

(soluble Salt) flooring over 20 mm (average)base

of cement mortar 1:6 (1cement : 6 coarse

sand)on new surface jointed with colour cement

slurry including finished with flush pointing &

cleaning the surface etc. complete including

colour approved by directed.

65 Providing and laying Polished vitrified 8 mm 20.60 Sqmt 1299.87

thick tile (soluble Salt) in risers of steps,skirting

Dedo and pillars laid on 10mm thick cement

mortar 1:3 (1-Cement : 3 coarse sand) and

jointed with gray cement slury mixed with

pigment to match the shade of slab including

rubbing and polishing etc. complete.

Item Description of Item Quantity Unit Rate In Amount

66 Providing and laying machine cut free edge 82.20 Sqmt 2296.74

machine mirror polished granite stone 18mm

thick finished treads and risers in Max 260 cm

length with 1cm projecting, nozing rounded

moulding in tread laid over 12 mm (av.) thick

bases of cement mortar 1:6 (1-cement : 6-coarse

sand) jointed with grey or colour cement slurry

including rubbing and polishing incl. making

Three No.s of grooves of size 3mm X 3mm along

the length of treads etc. complete

67 Providing and laying 8" thick Ironite flooring in 314.20 Sqmt 1403.90

C:C (M-200) laid in 1st layer of 188 mm thick &

2nd layer of Ironite material 2 kg/m² of 12mm

thick mixing with ratio of 1:4 with dry cement

finished with 3 phase Trimax floater disc incl.

material, labour and as per following method

incl. expansion joint at 30 mt. c/c as per

instruction Method of Ironite mixing : Mix well

Ironite & cement in dry condition & take one part

by volume of the above mixed material and two

volume of grit 6mm to 2mm size & mix well in

dry condition the grit should be of hard stone

clean & without dust. Add water 80 liter to

liter (Ration 0.4 to 0.45) water should be clean

portable & non Acidic. Method of before laying :

Surface of the graynplythic layer must be rough

and without water on the surface. At the time of

laying : Initial setting i.e. if ceases the thumb

impression control of quantity of water take

care to see the Ironite is mixed properly and

evenly in the mix. After laying : See that it is

properly leveled after formal setting of flooring

keep the are of the flooring under water for 8 to

10 days before use and necessary instruction by

Architect. Machine mixed and floater Dish

finished Ironite (200 mm. thick concrete mixture

machine and vibrator is compulsory)

68 Providing and laying polished Kota stone slab 246.80 Sqmt 970.48

flooring over 20mm (Average) thick base of

cement mortar 1:6 (1-cement : 6-coarse sand) or

L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid

over and jointed with grey cement slurry mixed

with pigment to match the shade of slab

including rubbing and polishing etc. complete.

69 Providing and laying polished kota stone slab 9.20 Sqmt 1111.36

25mm thick in risers of steps,skirting Dedo and

pillars laid on 10mm thick cement mortar 1:3 (1-

Cement : 3 coarse sand) and jointed with gray

cement slury mixed with pigment to match the

shade of slab including rubbing and polishing etc.

Item Description of Item Quantity Unit Rate In Amount

70 Providing and laying Ceramic tiles 6mm thick in 126.40 Sqmt 947.02

flooring treads of steps and landing laid on a bed

of 12mm thick cement mortar 1:3 (1-cement : 3-

coarse sand ) finishing with flush pointing in

71 Providing and laying coloured glazed tiles of the 417.20 Sqmt 1417.03

size 300 mm x 200 mm x 8 mm / 300 mm x

mm x 8 mm in skirting, risers of steps and dedo

on 10 mm. thick cement plaster 1:3 (1 cement :

coarse sand) & jointed with white cement slurry.

72 Providing and fixing pre-cast Rubber Dye / steel 1579.10 Sqmt 686.90

Dye inter locking concrete block 60mm thick

with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per

approved design Confirming to IS 15658 :

including 35 mm Sand layer for levelling and

filling the joint with sand in proper line and level

as per guidlines of IRC : SP 63-2018 etc.

73 Providing and laying broken chine mosaic 907.30 Sqmt 747.29

flooring for terrace using 12 mm to 20 mm

broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be

tempered to bring mortar creme out upto

surface using white cement including rounding

off junctions and extending them upto 15 cm

along the wall,clearing with water and oxalic acid

etc. as directed.

74 Providing and laying cement concrete flooring 907.30 Sqmt 335.24

1:2:4 (1-cement : 2-coarse sand : 4-graded stone

aggregate 20mm nominal size) laid in one layer

and finished with a floating coat of neat cement.

(A) 50mm thick.

75 Providing and fixing polished 18 mm thick 187.70 Sqmt 2457.33

Granite stone with full round edge and polished

of approved quality in clading on sill and around

the doors/ windows/ ventilation with 20 mm

thick cement plaster CM (1:4) and fixing with

cement slurry & adhesive including moulding of

exposed edges as directed by engineering in

charge etc. complete.

76 Providinfg and fixing Safty grills of required 5616.00 Kg 105.31

pattern for windows/ Door using necessary M.S

angle/ M.S pipe, M.S flats and other structural

steel at required spacing including cutting,

welding and fabriction etc. including one coat of

primer of approved quality and two coats of oil

painting as per detail drawing etc complete.

77 Providing erecting and fixing double coated 10000.00 Litre 3.95

Syntex PVC. (ISI) / Equivalent water tank of

required capacity each with all necessary fittings

and connection etc. complete on terrace.

Item Description of Item Quantity Unit Rate In Amount

78 Providing laying and jointing in true line and 80.00 Rmt 195.67

level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings make as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre

C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials.

79 Providing laying and jointing in true line and 80.00 Rmt 148.12

level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings make as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre

C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials.

80 Providing laying and jointing in true line and 60.00 Rmt 91.84

level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings make as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre

C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials.

81 Providing laying and jointing in true line and 35.00 Rmt 72.65

level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings make as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre

C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials..

Item Description of Item Quantity Unit Rate In Amount

82 Providing, laying and jointing in true line and 60.00 Rmt 831.22

level 160 diametre U.P.V.C (Type B) conforming

to IS 13592-1992 with one end plain and other

end socketed with rubber ring, & fittings

conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant,

pipe shall be fixed on wall using of PVC clamp of

the size 160 mm diametre x 210 mm length x

196 mm heigh at every 2000 mm center to

center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes

etc. including testing of pipes and joints and

jointed with adhesive solvent cement including

cost of all materials.

83 Providing laying (to level or slopes) and jointing 142.00 Rmt 665.48

reinforced concrete Light duty non-pressure

pipes I.S. class NP2 of the following internal

diameter with collars and butt ends prepared for

collar joints including testing of joints

complete.(D) 300 mm

84 Providing, laying and jointing in true line and 130.00 Rmt 834.39

level 110 diametre U.P.V.C (Type B) conforming

to IS 13592-1992 with one end plain and other

end socketed with rubber ring, & fittings

conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant,

pipe shall be fixed on wall using of PVC clamp of

the size 110 mm diametre x 149 mm length x

145 mm heigh at every 2000 mm center to

center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes

etc. including testing of pipes and joints and

jointed with adhesive solvent cement including

cost of all materials.

85 Providing, laying and jointing in true line and 34.00 Rmt 247.45

level 75 mm dia. UPVC SWRType B pipe

conforming to IS 13592-1992 with one end plain

and other end socketed with rubbering and

fitting conforming to ISI 14735-1999 of

approved make for drainage system pipe line,

pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using of PVC

clamp at every 2000 mm c/c or shall be conceled

in walss as directed including necessary fittings

such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

86 Providing and fixing in PVC SWR cowel went 8.00 No 16.67

110mm dia to pipes.(B) 110mm dia.

Item Description of Item Quantity Unit Rate In Amount

87 Providing and fixing in PVC SWR cowel went 2.00 No 15.66

75mm dia to pipes.(B) 75mm dia.

88 Providing and fixing PVC SWR Nahni trap IS 16.00 No 558.66

14735 for drain - 100 mm diameter with jali of

the following nominal diameter of self cleansing

design with C.I scread down or hinged grating

including the cost of cutting and making good the

89 Providing and fixing in position 300 mm high, 200.00 No 707.00

150 mm wide English letters made from 1.0 mm

thick stainless steel sheet as directed by

Engineer in charge with all necessary tools &

plants etc. complete.

90 Providing and fixing S.W. gully trap with C.I. 6.00 No 1246.92

grating brick masonry chamber and water tight

C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight (i) Square mouth

traps (B) 150mm x 100mm size P or R type

91 Providing and fixing wash down water closet 10.00 No 3001.72

(European type W C pan) with integral P and S

trap including jointing the trap with soil pipe in

cement mortar 1:1 (1 cement five sand)

including providing and fixing plastic seat cover

for wash down WC with CP brass hinges and

rubber buffers back plastic seat and including

providing and fixing PVC flushing tank with a

pair of C I or MS bracket with complete fitting

such as lead valve siphon 15 mm dia brass ball

valve with polythene float CP brass handle

unions and couplings for connection with inlet

out let and over flow pipes 40 mm dia porcelain

enameled flush bend including cutting holes in

walls and making good the same connection the

flush bend with cistern and closet vitreous china.

{Hindustan, Cera, Parryware or equivalent }

92 Providing and fixing brass screw down stop 8.00 No 205.83

tap.(A) 15mm dia.

93 Providing and fixing ball cock of approved. 4.00 No 189.84

quality as directed.(A) Copper Metal (ii) 50mm

94 Providing and fixing washbasin with single hole 12.00 No 1919.69

for pillar tap with C.I. or M.S. brackets painted

white including Rubber plug, sutting holes and

making good the same but excluding fittings and

also including rate of C.P. brass waste for

washbasin or sink (A) 32mm dia. , M.I. fisher

union for washbasin or sink (A) 32mm dia

,Rubber Plug for sink and .pillar tap, capstan

head, screw down high pressure with screws,

shanks and back nuts. (i) 15mm dia.(A) Vitreous

China:(ii) Flat Back washbasin 550 mm x v

400mm size. (i) In white colour.

Item Description of Item Quantity Unit Rate In Amount

95 Providing and fixing 600mm x 450mm bevelled 12.00 No 833.73

edge mirrror of superior glass mounted on 6mm

thick A.C. sheet or plywood sheet and fixing to

wooden pluge with C.P. brass screws and

96 Providing and fixing C.P. brass towel rail comlete 8.00 No 603.19

with C.P. brass brackets fixed to wooden plugs

with C.P. brass scews (B) 600mm x 20mm size.

97 Providing and fixing screw down bib taps of 40.00 No 214.81

following size.(A) Brass screw down bib tap

polished bright. (i) 20mm dia.

98 Providing and fixing Urinal of approved quality 8.00 No 1542.02

including connection with trap and with integral

longitudinal flush pipe.(A) Squating plate pattern

white earthenware 550mm x 300mm.

99 Providing and fixing chromium plated brass half 8.00 No 263.77

trun flush cock of approved quality including

fixing in pipe line etc. complete (ii) 25mm dia.

100 Constructing brick masonry chamber for 10.00 No 3172.41

underground C.I. Inspection chamber and bends

with briocks having croshing strength not less

than 35Kg. Cm2 in C.M. 1:5 precast RCC cover

455mm x 610mm intenal dimensions with frame

(R.C.C. top slabe with 1:2:4 mix (1-cement :2-

coarse sand :4-graded stone aggregate 20mm

size) foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on

walls and bed concrete etc. complete (i) Inside

dimensions 455mmx 610mm and 450mm deep

for single pipe line.

101 Constructing brick masonry chamber for 10.00 No 3883.45

underground C.I. Inspection chamber and bends

with briocks having croshing strength not less

than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame

(Light duty) 455mm x 610mm intenal

dimensions total weight of cover with frame to

be not less than 38Kg. (Wt. of cover 23 Kg.) and

Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4

mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat

of neat cement on walls and bed concrete etc.

complete.(i) Inside dimensions 500mmx 700mm

and 450mm deep for single pipe line.

102 Extra over items for every additional depth of 10.00 No 242.39

0.1M. of part thereof beyond 450mm depth for

Brick masonry chamber.(i) for 455mm x 610mm

Item Description of Item Quantity Unit Rate In Amount

103 Extra over items for every additional depth of 10.00 No 264.86

0.1M. of part thereof beyond 450mm depth for

Brick masonry chamber.(i) for 500mm x 700mm

104 Providing cement vata (10cm x 10cm size) 138.80 Rmt 23.68

quarter round in cement mortar 1:1 including

neat cement finishing watering etc. Complete

105 Providing and fixing polished 18 mm thick black 6.00 Sqmt 2650.24

granite with full round edge and double side

polished of approved quality in between urinal

and fixing with cement slurry & adhesive

including moulding of both exposed edges as

directed by engineering in charge etc. complete.

106 Providing and fixing MS Ladder of required 300.00 Kg 110.09

pattern with MS flats(30x3mm) or round or

square bars (12mm) at required spacing & with

round headed bolts and nuts or screws or

welding including primer coat of approved

quality and two coats of oil paintas as directed

by engineer in charge

107 Providing and fixing coloured self adhesive PU- 12.00 Sqmt 4766.70

Tactile tile, ground surface indicators of

Polyurethane) of size 300mm x 300mm for

guiding/warning to the visually visitors in the

centre/side of the pedestrian/approach pathway

as per specification and guidelines complete in

all respect to the entire satisfaction of in charge.

108 Providing and Fixing Size: L 75mm x W 75mm x 12.00 No 685.29

H 1200 ; 15 mm thick U shape corner Rubber

Reflective Guards with yellow reflective Patti

fixing on RCC/brick surface Including all fitting

and material charges & it shall be Chemical

Resistant, Fade Proof, Frost - Heat & Weather

Proof, High Flexural Strength, Highly Durable,

Stain Resistance as per detailed drawing etc.

complete as directed by Architect or Engineer in

Item Description of Item Quantity Unit Rate In Amount

109 Providing and Fixing 15 mm thick 300 mm x 300 12.00 Sqmt 1207.96

mm Tactile Warning Tiles (Attention Tiles i.e.

Tactile Warning Surface Indicator {TWSI}) of

Johnsan Endura Tac Button Yellow Plus or

equvqlent make in flooring laid on 20 mm thick

cement mortar 1:6 (1 cement : 6 coarse sand) on

new surface and jointed with cement slurry

including finished with flush pointing & cleaning

the surface for all floors as per detailed drawing

etc. complete as directed by Architect or

Engineer in charge. Thse tiles shall be Anti Skid,

Chemical Resistant, Fade Proof, Frost - Heat &

Weather Proof, High Flexural Strength, Highly

Durable, Stain Resistance . All Tactile Warning

Tiles meet the specific size and dimension

standards as required by ISO/FDIS

110 Providing and Fixing a set of wall mounted 38 4.00 No 2671.45

mm dia U shaped horizontal stainless steel

collapsible grab bar , 38mm vertical stainless

steel fixed grab rail of grade SS 304 from round

pipe supported and 75 mm dia 8 mm thick SS

304 base flange on wall including anchor

fasteners, nuts, accessories as per detailed

drawing etc. complete as directed by Architect or

Engineer in charge.

111 Providing and fixing C.I. Manhole cover 0.60 M. x 1.00 Nos 958.17

0.45M. size having weight not less than 35Kg.

112 Providing & erecting open well horizontal mono 1.00 Nos 36107.50

block pump set with cast iron body, complete for

three phase submersible motor having [H]For

H.P,3 phase open well horizontal mono block

pump set suitable for 1600 LPM to 1025 LPM @

33 to 42 MTR head suitable for 65/80 mm dia

Item Description of Item Quantity Unit Rate In Amount

113 Supplying & erecting approvedmake 3 phase 2.00 Nos 19695.00

motor control cubicalpanel (Star-Delta) made

from 16G.CRCA sheet duty painted with epoxy

powder painted inside and outside with hinged

doors and locking arrangement, consisting

suitable size of ON-OFF isolator (AC- 3/23duty)

main fuses,single phasing preventer cum water

level, Guard(Compe unit), Toggle switch to by

pass Single phase preventercum WLG,indicating

lamps forR-Y-Bphases, over load relay.Automatic

water level controller, Ammeter &Voltmeter

each with two way selector switch incoming

wires duty socket Crimped,Panel to be erected

on angle iron frame grouted on wall as overload

relay,thermal/Electronics star delta cutoff

timer,start-stop push buttons.The isolator

overload relay &cntractors ofL&T,Siemens or

Cuttler Hamer make only.Panel to be erected on

angle iron frame ground on wall (e)S/D upto

114 Drilling of min. 250 mm dia. bore hole in all 100.00 Rmt 1270.58

strata including dualover burden strata by

combination DR/DTH rig including lowering

mm dia MS ERW pipes in bore hole and testing

etc.all work as per directed engineer incharge.

115 Manufacture, supply and delivery of cage 30.00 Rmt 1682.66

typeTrapezoidal shape ( ' V ') wire wound low

carbon, Galvanized screen pipe and Stainless

Steel Screen pipes, confirming IS: 8110 For (B)

200mm dia 1) 1.00mm Slot size

116 Bore plug having 100 mm height made from M.S. 1.00 No 1161.62

plate with 3 holes at equal distance on

circumference for nut-bolts type, locking

arrangement with nuts-bolts & lock nuts of std.

Make complete. For 250mm dia

117 Providing PVC insulated flat submersible cable as 120.00 Rmt 180.79

per detailed technical specifications of R/C of

GWSSB conforming to IS 694, IEC 60227 /

118 Suppling and installing 3 Phase Borewell 15.00 1.00 No 37130.63

HP Submersible Pump Sets Electric motor driven

conforming to I.S. 8034 and motor conforms to IS-

9283 working at 3 phase 400/440 volt 50 C/S

A.C. supply & 2900 R.P.M. cat

119 Providing and fixing check or non return pully 1.00 No 1111.00

wheel valve of 50 mm diameter.

120 Providing and fixing to wall,ceiliing and floor 90.00 Rmt 787.40

galvanised mild steel tubes ( Medium grade ) of

the following nominal bore, tube, fittings and

clamps included making good the wall, ceilling

and floor (F) 50 mm

Item Description of Item Quantity Unit Rate In Amount

121 Providing and fixing to wall ceiling and floor 10.0 46.00 Rmt 336.23

Kg. F/Cm2 working pressure poluthene pipes of

the following outside Dia. Low densidy, complete

with special falnge compression type fittings,

wall clipsetc. including making good the wall

ceiling and floor.(G)110 mm

122 Providing and fixing to wall ceiling and floor 10.0 40.00 Rmt 696.90

Kg. F/Cm2 working pressure poluthene pipes of

the following outside Dia. Low densidy, complete

with special falnge compression type fittings,

wall clipsetc. including making good the wall

ceiling and floor.(G)160 mm

123 Providing junction for rain water juncton 6.00 Nos. 7349.77

chamber of size 0.60x0.60x0.75m with

excavation of size 1.96x1.96 m & 0.15m thick

c.c.1:2:4 bed concrete including brick masonary

wall in CM 1:6 of 0.75m height & 0.23m thick

with 15mm thick cement plaster inside & outside

& 1.06x1.06 RCC (1:2:4) slab of thickness 0.15m

with CRS steel and 0.60mx0.45m cast iron

manhole cover with frame weight not less than

35 kg as per directed by Engineer-in-charge

124 Providing Filter chamber of Brick work in C:M 2.00 Nos. 11697.82

1:6 of size 2.06mx1.20m x1.20m & excavation

dimension of 2.66mx 1.81x1.35m including C.C

1:2:4 bed concrete of 0.15m thick including brick

work in c.m 1:6 for 23cm thick wall including

15mm thick cement plaster inside & outside with

cement slurry & 10cm thick RCC 1:2:4 top cover

with frame of minimum weight of 35 kg & filling

filter material kapchi in layers (25-40mm & 10-

20mm) & BT metal 40mm & sand as per

directed by Engineer-in-charge.

125 Providing Recharging pit of size 2.0m Dia.& 2.0m 1.00 Nos. 7065.96

depth of water logging with excavation filling the

pit with gravel & sand in layers including making

300mm dia bore depth of 4.5mt & above

concrete with kapchi in layers (25-40mm & 10-

20mm) & BT metal 40mm & filling brick as

directed by Engineer-in-charge.

Item Description of Item Quantity Unit Rate In Amount

126 Supply. installation, testing & commissioning of 1.00 No 68680.00

ISI approved electrical motor driven jockey

pump set having 450 LPM @ 50m head. The

pump unit shall be a horizontally direct mounted

motor. Unit shall comprise the following

minimum requirements:

a) Pump, b) Electric motor IE2, c) Foundation

bolts, d) Mating flanges with gasket and

fasteners, e) Discharge gauges, etc. complete in

all respect, with labour, with GST.

127 SSupply. installation, testing & commissioning of 1.00 No 395920.00

DIESEL ENGINE DRIVEN PUMP :

SUITABLE OF AUTOMATIC OPERATION

CONSISTING OF THE FOLLOWING

-- COUPLED CENTRRIFUGAL TYPE PUMP

-- HEAD - 70 MTR

WITH BRONZE IMPELLER , COMPLETE SS SHAFT

AS PER CONFIRMING TO REQUIREMENTS OF IS

128 Supply, fabrication & erection of aboveground 10.00 Rmt 474.70

G.I. 'C'-Class, ERW piping, conforming to IS:1239,

part-I, Heavy class up to 150 mm dia. and

IS:3589, for size 200 mm dia. & above, thickness.

G.I. pipe fitting's as per IS: 1239, part-II, Heavy

class for size 150 mm dia. & below & IS: 3589, for

size 200 mm dia. above, flanges, nuts bolts &

washers, 3 mm thick gasket, pipe hangers, etc.

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe

support, shall be two coat of zinc primer and two

coats of fire red conf. to IS: 5, Shade

Complete with all accessories as per approved

drawings, specicification and direction of the

Engineer-in-Charge, with all complete.

Item Description of Item Quantity Unit Rate In Amount

129 Supply, fabrication & erection of aboveground 150.00 Rmt 1989.70

G.I. 'C'-Class, ERW piping, conforming to IS:1239,

part-I, Heavy class up to 150 mm dia. and

IS:3589, for size 200 mm dia. & above, thickness.

G.I. pipe fitting's as per IS: 1239, part-II, Heavy

class for size 150 mm dia. & below & IS: 3589, for

size 200 mm dia. above, flanges, nuts bolts &

washers, 3 mm thick gasket, pipe hangers, etc.

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe

support, shall be two coat of zinc primer and two

coats of fire red conf. to IS: 5, Shade

Complete with all accessories as per approved

drawings, specicification and direction of the

Engineer-in-Charge, with all complete.

130 Design , Supply and installation of Safety Signage 6.00 sqmt 3787.50

made of Zinc Sulphilde based glow in dark , Rigid

sheet with High Luminous property enclosed in a

transperent weather proof UV stabilized plastic

pasted on 3 mm thick clear acrylic sheet such as

EXITS, EMERGENCY EXIT, DO NOT USE LIFT

DURING FIRE, FLOOR MARKINGS, FIRE LIFT,

STAIRCASE EXIT, FIRE ALARM CALL POINT, FIRE

HOSE REEL, FIRE HYDRANT POINT etc.

131 Supply, installation, testing & commissioning of 1.00 No. 3333.00

pressure switch. (Range 0 to 16 kg/cm2)

132 Supply, installation, testing & commissioning of 2.00 No. 3232.00

150 mm dia. dial Burdon Type Glycerine Filled

pressure gauge with isolation ball valve

arrangements with necessary isolation valves

with all complete.( Range 0 to 15 kg/cm2)

133 Supply, Installation, Testing & Commissioning of 5.00 No. 3686.50

Cast iron body Butterfly valve according to IS:

13095, PN-1.6, Iron Disc for size 150 mm dia. &

below Lever operated and above 150 mm dia.

Gear operated complete with mating flanges

/ANSI class # 150 with bolts & nuts washers,

rubber gaskets 3 mm thick, etc., with all

134 Supply, installation, testing & commissioning of 1.00 No. 2121.00

SG iron body SinglePlate Wafer Type NRV conf.

to ASTMA 536, PN-1.6 complete with mating

Flanges class # 150 with bolts & nuts, washers,

gaskets 3 mm thick, etc., with all complete.

Item Description of Item Quantity Unit Rate In Amount

135 Supply, installation, testing & commissioning of 1.00 No. 6019.60

Two way fire brigade Inlet connection with

mm dia. stainless steel (SS304) instantaneous

male inlets with built in non return valve in each

inlet with 100 mm dia. header pipe, suitable

rubber cap and GI chain including nuts, bolts,

washers, gasket 3 mm thick, etc. with all

136 Supply, Installation, testing & commissioing of 4.00 No. 8736.50

Swinging type mild steel hose reel drum with

mm dia. x 30 Rmt. rubber hose as per IS:

The mounting stand shall be of mild steel and the

hose shall be fitted with a SS shut-off nozzle & SS

ball valve of 25 mm dia. including supporting

arrangement with all complete. accessories

137 Supplying, fixing & testing of of SS ball Valve 10 1.00 No. 565.60

138 Supplying, fixing & testing of of SS ball Valve 15 2.00 No. 666.60

139 Supplying, fixing & testing of of SS ball Valve 20 6.00 No. 787.80

140 Supplying, fixing & testing of of SS ball Valve 1.00 No. 833.25

141 Supply,Installation And Commissioning Of Hose 6.00 No 353.50

Nipple with Pipe Clamp

142 Filling Of Gaps Between pipe and Core Cutting 12.00 No 454.50

Hole With Chemical and Cement

143 Supply,fabrication and erection of Structure MS 140.00 Kg 101.00

Material as like Angle, C channel,I Beam Etc.

144 Supply, installation and commissioning of 50.00 Rmt 222.20

Copper Flexible cable for 7.5 HP Motor - 4 sq mm

145 Supply and Fitting Change Over Switch (GEB/DG) 1.00 No. 9090.00

146 Supply, Filling and Fixing of approved make ABC 8.00 No. 2323.00

type fire extinguisher - 6 Kg. Capacity as per

147 Supply, Filling and Fixing of approved make CO2 8.00 No. 6514.50

type fire extinguisher. Capacity 4.5 Kg.

(conforming to IS-15683).

148 Submitting the application to obtain Fire NOC for 1.00 No. 40400.00

one year to SMC Department,Providing complete

practical demonstration of fire system in

presence of fire officer and Submitting the

photographs of demonstration, refilling and

testing certificates of fire extinguisher,Obtaining

and providing certificate of FPCOR, Payment of

NOC Fees to SMC Department, Preparing the

documents of Affidavit and AMC with

Notorization And Submitting to Department,

follow up to receive NOC And Providing to R & B

Including all above expenditure.

Item Description of Item Quantity Unit Rate In Amount

149 Supply, Installation and commissioning of 3-4 1.00 set 111100.00

Layer PVC Fire water tank 10,000 litre capacity

on terrace with necessary piping on it.

150 Supply, Installation and commissioning of 1.00 set 151500.00

Fabricated Stair case made up of MS angle and

channel for emergency exit.

151 Supply, Installation and commissioning of Fire 2.00 No 22725.00

Alarm Panel Conventional type, 2 zone, with

complete accessories.

152 Supply, Installation and commissioning of Audio 6.00 No 1262.50

hooters , with complete accessories.

153 Supply, Installation and commissioning of 6.00 No 1191.80

Manual Call Points, with complete accessories.

154 Cable(Armour) for Fire Alarm system 120.00 Rmt 111.10

155 Core cutting in wall and in RCC slab with size 50 10.00 No 505.00

156 Core cutting in wall and in RCC slab with size 150 10.00 No 757.50

157 Box cutting the road surface to proper slope and 819.00 Cum. 103.85

camber for making a base for road work

including removing the excavated stuff and

depositing on the road side slope as directed

upto 50Mt.lead.

158 Filling in plinth with sand under floors including 176.00 Cum. 241.39

watering ramming, consolidating and dressing

159 Construction of granular sub-base 150 mm thick 185.00 Cum. 1374.61

by providing coarse graded machine crushed B.T.

material satisfying MOST specification of grading

I (B.T. stone aggregate 53 mm to 26.5 mm 35 %,

26.5 to 4.75 mm - 45 % and 2.36 mm below -

% )including spreading in uniform layer with

motor grader on prepared surface, mixing by mix

in place method with rotavator at OMC and

compacting with vibratory roller to achieve the

desired density etc. complete.

160 Providing and laying wet mix macadam base 308.00 Cum. 1445.31

course 250 mm thick using machine crushed B.T.

chips as per required gradation mixing with

required optimum quantity of water, conveying

the mix to site of work, spreading in to grade and

camber with mechanical paver and consolidation

each layer with vibratory roller including cost of

material labour plant and equipment etc.

161 Compaction and finishing of cement concrete 1170.00 Sqm. 63.63

road by trimix M.250 process providing extra

Labour charges for the trimix vacume

dewatering service process on cement concrete

road sutface by using vacuum dewatering pump

floater surface vibrator including making groves

and rough finish to surface including leveling etc

Item Description of Item Quantity Unit Rate In Amount

162 Providing and fixing pre-cast concrete kerb stone 520.00 Rmt. 361.64

of gray cement based concrete block 30cm

length,30cm height and 15cm thick of M250

grade concret as per approved design and

including excavation for fixing in proper line and

level,filling the joint with C:M 1:3 (1cement:3fine

sand) etc complete.

163 Steel work, welded in built up sections framed 6677.00 Qntl. 90.48

work including cutting, hoisting, fixing in

position and applying a priming coat of read lead

paint & two coat oil paint. (A)In beams and joists,

channels angles Tees, flats, with connecting

plates or angle cleats as in main and cross beams.

Hip and jack rafters, purlins conneted to

common rafters and the like..

164 Providing and fixing of Ridge flashing for roof 191.00 Sqm 858.67

panel shall be made out of 0.5 mm thick pre

coated GI sheet . The Precoated sheet shall be of

minimum 240 mpa steel grade confirming to IS

14246:1995 and shall have zinc coating of

minimum 120 gsm as per IS:277:1992 , 5-7

microns epoxy primer on both side of the sheet

and polyester top coat 15-18 micron. The PPGI

Sheet shall have plastic protective guard film of

minimum 25 microns to avoid scratches during

transportation. The ridge shall be fixed to the

steel members by pop rivet or self drilling/self

stitching fastners @ maximum 450 mm c/c along

length of capping/flashing etc complete .

165 Constructing providing and fabricating cattle 30.00 Sqmt 5514.60

guard using channel section frame of size ISMC

series 100 mm x 50 mm (Weight 9.20 kg/Rmt)

and ISMC section 100 mm x 75mm (weight

kg/Rmt) intermediate support for welding

G.I.pipe at 12 Cm C/C of size 50 mm in a frame

made of Channel section size 100 mm x 50 mm

all round including fixing the unit on prepared

chamber of masonary wall using MS hold fast

embeded in masonary wall top as directed by

Engineer in charge and as per drawing and

necessary required arrangement etc complete.

Item Description of Item Quantity Unit Rate In Amount

166 Providing and fixing decorative entrance gate 2250.00 kg 119.18

made out of cast iron and various mild steel

tabular section combination , the Ornamental

entrance gate should be fixed at compound wall

including pattern and die making , cutting

welding , grinding, fabrication , fixing in position

at compound wall with necessary pedestal,

bearing block and other locking arrangement.

The entrance gate should be painted with two

coats of priming coat of paint, and two coat of oil

paint etc complete. As per detail design and

instruction of architect.

167 Providing and fixing concertina coil fencing with 300.00 Rmt 547.42

punched tape concertina coil 600 mm dia 10 mt

openable length having 24 no rounds per 6 mt

length, upto 3mt height of wall with existing

angle iron (50mm x50mm x5mm )requird

shaped As per Directed Engeenier in charge.

placed 2.4mt or 3.00mt apart and with

horizontal R.B.T. reinforced barbed wire(3 mm)

stud tied with G.I. staples and G.I. clips to retain

horizontal, including necessary bolts or

G.I.barbed wire tied to angle iron, all complete as

per direction of Engineer-in-charge, with

reinforced barbed tape (R.B.T.)/Spring core (2.5

mm thick) and weight 43.478 gm/meter at

compound wall for ESR M4/ intakewell.

168 Clearing and grubbing road land including 0.14 Hectare 28393.07

uprooting rank vegetation grass

bushes,shrubs,sapling and trees girth up to

mm removal of stumps of trees cut earlier and

disposal of unserviceable materials (C) By

mechanical means in area of light jungle

169 Earthwork for embankment including breaking 2782.00 Cum 161.22

clods, dressing with all lead and lift (excluding

watering and consolidation)(E) From Borrow

area within all lead

170 Rolling of earthwork in layers with power roller 2782.00 Cum 22.40

including filling in depressions which occur

during the process and Watering of earth work

Item Description of Item Quantity Unit Rate In Amount

171 Point wiring for Light / Bell with 2-1.5 sq.mm 247.00 Pts 449.45

& earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in

below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth

continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling

as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as

directed.(f) with medium class Rigid PVC pipe

and accessories erected concealed in

wall/ceiling complete.Cat-III (Make:- Honeywell,

L&T, Havells, Indoasian, Legrand)

172 Point wiring for FAN with 2-1.5 sq.mm & earth 161.00 Pts 629.23

wire of 1.5 sq.mm (Green) both are of .ISI

marked 1.1 KV Grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length, in

below type of pipe erected with 6A Modular

type switch and hum free EME step type

electronic fan regulator mounted and

accessories with earth continuity of following

type erected on PVC / Metallic/Wooden box,

single mounting base frame covered with

textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as

directed..(f) with medium class Rigid PVC pipe

and accessories erected concealed in

wall/ceiling complete.Cat-III (Make:- Honeywell,

L&T, Havells, Indoasian, Legrand)

173 Point wiring for Individual Plug with & earth 18.00 Pts 473.69

wire of 1.5 sq.mm (Green) both are of ISI marked

1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type

of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate

front plate modules erected on / in wall / ceiling

as per pipe erected with following type of

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm

Cu. Wire from nearby switchboard/mcb db

board (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

completeCat-III (Make:- Honeywell, L&T, Havells,

Indoasian, Legrand)

Item Description of Item Quantity Unit Rate In Amount

174 Point wiring for on board Looped Plug with 6A 98.00 Pts 241.39

Modular type switch & 5 pin socket erected on

PVC / Metallic/Wooden box, single mounting

base frame covered with textured /

metallic/white front plate modules erected on /

in wall / ceiling with following type

accessories.Cat-III (Make:- Honeywell, L&T,

Havells, Indoasian, Legrand)

175 Providing following type of Modular Type 6.00 Nos. 153.52

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with necessary

connections as per site situation directed by

Engineer In charge.

(3) Two Pin/RJ-11 Telephone Socket[A] For One

Gang Cat.III (Make:- Honeywell, L&T, Havells,

Indoasian, Legrand)

176 Providing following type of Modular Type 2.00 Nos. 153.52

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with necessary

connections as per site situation directed by

Engineer In charge.

(4) TV Co-axial Socket outlet Cat-III (Make:-

Honeywell, L&T, Havells, Indoasian, Legrand)

177 Providing following type of Modular Type 98.00 Nos. 24.24

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with necessary

connections as per site situation directed by

Engineer In charge.

(7) Blank Plate Single Cat.III (Make:-

Honeywell, L&T, Havells, Indoasian, Legrand)

178 Providing following type of Modular Type 30.00 Nos. 153.52

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with necessary

connections as per site situation directed by

Engineer In charge.

(8) Computer RJ-45 socket Cat-III (Make:-

Honeywell, L&T, Havells, Indoasian, Legrand)

179 Providing following type of Modular Type 29.00 Nos. 172.71

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with necessary

connections as per site situation directed by

Engineer In charge.

(9) 16 Amp. SP one way switch Cat-III (Make:-

Honeywell, L&T, Havells, Indoasian, Legrand)

Item Description of Item Quantity Unit Rate In Amount

180 Providing following type of Modular Type 29.00 Nos. 190.89

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with necessary

connections as per site situation directed by

Engineer In charge.

(10) 6/16Amp. Universal socket Cat-III (Make:-

Honeywell, L&T, Havells, Indoasian, Legrand)

181 Providing and erecting ISI mark Medium class 557.00 Mtrs. 32.32

RIGID PVC PIPES of following size complete to be

erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed

with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed (b)

182 Providing and erecting ISI mark Medium class 90.00 Mtrs. 52.52

RIGID PVC PIPES of following size complete to be

erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed

with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed (c)

183 Providing & erecting PVC Corrugated Flexible 140.00 Mtrs. 20.20

Conduit with required nos. of coupling, PVC

bushes, Check-nuts etc. complete of following

sizes. (2) 25 mm

184 Providing & erecting PVC Corrugated Flexible 70.00 Mtrs. 26.26

Conduit with required nos. of coupling, PVC

bushes, Check-nuts etc. complete of following

sizes. (3) 32 mm

185 Supplying and laying UPVC cable trunking 200.00 Mtrs. 409.05

system comprising unplasticised polyvinyl,

chloride rigid material with ignition free and

flame proof confirming BS with necessary end

caps Internal and external bend, flat bends,

coupler, tee etc..All necessary accessories and

measuring of following sizes (2) 100 mm x

186 Providing and erecting Mains with 1.1 KV grade 1764.00 Mtrs. 78.78

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling,

with 1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth

continuity of following size (A) with medium

class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm (Make: -RR Kabel, Havells,

Avocab, KEI,Johnson)

Item Description of Item Quantity Unit Rate In Amount

187 Providing and erecting Mains with 1.1 KV grade 1121.00 Mtrs. 107.06

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC

pipe and accessories

(a) 2 wire 4 sq. mm (Make: -RR Kabel, Havells,

Avocab, KEI,Johnson)

188 Providing and erecting Mains with 1.1 KV grade 1020.00 Mtrs. 140.39

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC

pipe and accessories

(b) 2 wire 6 sq. mm (Make: -RR Kabel, Havells,

Avocab, KEI,Johnson)

189 Providing and erecting Mains with 1.1 KV grade 416.00 Mtrs. 172.71

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC

pipe and accessories

(g) 4 wire 4 sq. mm (Make: -RR Kabel, Havells,

Avocab, KEI,Johnson)

190 Providing and erecting Mains with 1.1 KV grade 1020.00 Mtrs. 248.46

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC

pipe and accessories

(h) 4 wire 6 sq. mm (Make: -RR Kabel, Havells,

Avocab, KEI,Johnson)

191 providing and erecting Mains with ISI marked, 112.00 Mtrs. 87.87

1.5KV grade electrolyte multi stranded, annealed

copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor

starters & control wiring) with required size of

copper lugs, nuts and bolts if required.(f) One

wire 10.00 sq. mm

Item Description of Item Quantity Unit Rate In Amount

192 providing and erecting Mains with ISI marked, 200.00 Mtrs. 135.34

1.5KV grade electrolyte multi stranded, annealed

copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor

starters & control wiring) with required size of

copper lugs, nuts and bolts if required.(g) One

wire 16.00 sq. mm

193 providing and erecting Mains with ISI marked, 100.00 Mtrs. 286.84

1.5KV grade electrolyte multi stranded, annealed

copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor

starters & control wiring) with required size of

copper lugs, nuts and bolts if required.(i) One

wire 35.00 sq. mm

194 Supplying and erecting Flexible PVC insulated 324.00 Mtrs. 44.44

multi strand multi core 1.1 kv grade ISI marked

copper wires of following size to be erected as

directed. e) 1.50 Sq.mm 3 core round PVC

195 Providing & Erecting approved make following 120.00 Mtrs. 59.59

size of TV Co-axial flexible cable comprising

inner conductor of solid bare copper insulated

with Foam PE & Secondary conductor made of

poly - Aluminium film bonded Al. Braids @

suitable coverage overall sheathed with black

PVC insulation. e).RG-11

196 Supplying & erecting approved make Telephone 196.00 Mtrs. 19.19

Cable electrolytic copper conductor PE insulation

twisted in two pairs, & wrapped with FRLS PVC

tape & sheathed with FRLS PVC or HFFR outer

Jacket suitable for telephone wiring & confirming

to C-DOT erected in existing pipe. of following

size of conductors & nos.of pairs. With necessary

connections. [A] Conductor Size 0.5 mm (a)

197 Supplying & erecting approved make Telephone 70.00 Mtrs. 38.38

Cable electrolytic copper conductor PE insulation

twisted in two pairs, & wrapped with FRLS PVC

tape & sheathed with FRLS PVC or HFFR outer

Jacket suitable for telephone wiring & confirming

to C-DOT erected in existing pipe. of following

size of conductors & nos.of pairs. With necessary

connections. [A] Conductor Size 0.5 mm (a)

Item Description of Item Quantity Unit Rate In Amount

198 Supplying & erecting approved make LAN cable 932.00 Mtrs. 73.73

of following size in existing pipe as per direction

199 Providing & erecting main Distribution (MDF) 0.00 0.00 0.00

indoor type, back mounted frame as per DoT

standard approved with krone strips

200 (a) Suitable for 10 pair 2.00 Nos. 949.40

201 Supplying & erecting M.S. Box having 16 Gauge 4.00 Nos. 84.84

painted with red oxide or Heavy duty PVC box

erected flushed on wall or concealed in wall with

necessary plastering & finishing as directed of

following size. (c) 200 mm x 250 mm x 75 mm

202 Providing & erecting Switch board for Computer 18.00 Nos. 1081.71

or electric apparatus consisting of following

modular type accessories mounted with PVC /

Metallic concealed/open box with single

mounting base frame covered with

textured/metallic /white front plate,modules

erected with necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories.Cat-III (Make:-

Honeywell, L&T, Havells, Indoasian, Legrand)

203 Decorative call bell Ting-tong box type 250 volts 1.00 Nos. 68.68

complete erected

204 Supply of Fibreglass Step (A Type) Ladder - 6 FT 1.00 Nos. 13276.45

having following specifications :

It should have nonconductive Structural

moulded top, with Slots to keep tools close at

hand, inside Spreader Braces, Aluminium Feet

with thick rubber tread, nonconductive Full

channel Fibreglass and two pairs of gusset

support at the bottom step. All gussets are heavy

Capacity : 300 lbs. Step Size : 3” Width : 23”

Spread : 41” Approx.

Wt. : 11 Kg Approx. Cube : 6.2’

Item Description of Item Quantity Unit Rate In Amount

205 Supplying and erecting LED indoor fittings with 206.00 Nos. 373.70

LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion

resistance with diffuser with company

mark/name 160V to 270V, Power Factor more

than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(A) Tube Light with integral/ non-integral driver

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional

4 feet Cat III (Make:- Wipro,

LT,Philiphs,Havells,Jaquar)

206 Supplying and erecting led lamps with following 12.00 Nos. 112.11

wattage capacity of 220 to 240 voltage, minimum

15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting

suitable for E14 / E27 / B22 lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser

suitable LAMP holder

(i) 5 to 8 watts Cat-III (Make:- Wipro,

LT,Philiphs,Havells,Jaquar)

Item Description of Item Quantity Unit Rate In Amount

207 Supplying and erecting LED indoor fittings with 5.00 Nos. 427.23

LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in

aluminium casted body with company

160V to 270V,Power Factor more than 0.95, THD

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed

Mount Downlight with provision for spring

loaded mounting clips complete.IP20

(ii) 11-15 watts, Surge-2 KV Cat-III (Make:-

Wipro, LT,Philiphs,Havells,Jaquar)

208 Supplying and erecting LED street light / Flood 20.00 Nos. 5976.17

light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and

corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-

80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection. (iii) Above 60 to

watts. Cat-III (Make:- Wipro,

LT,Philiphs,Havells,Jaquar)

209 (B) Flood Light (IP-65), Surge protection -4KV 8.00 Nos. 8453.70

integral and ,Light must have 440VAC line supply

with over-voltage protection.(v) above 120 to

160 watts Cat-III (Make:- Wipro,

LT,Philiphs,Havells,Jaquar)

Item Description of Item Quantity Unit Rate In Amount

210 (C) Post Top Lantern LED fitting comprises of 4.00 Nos. 4819.72

finish cast aluminum spigot and spun aluminum

canopy fixed with opal polycarbonate, pipe

arrangement for vertical mounting driver and

accessories wired upto terminal block.IP

(ii)32-40W Cat-III (Make:- Wipro,

LT,Philiphs,Havells,Jaquar)

211 Providing and erecting Approved make Four pole 12.00 Nos. 6173.12

moulded case circuit breaker having breaking

capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed

thermal & magnetic release suitable to work on

A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in

existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III (Make:- Indoasian,

L&T (LK), ABB, Schneider)

212 Providing and erecting Approved make Four pole 11.00 Nos. 8055.76

moulded case circuit breaker having breaking

capacity ICU of 35 KA. at 415 V. having normal

current rating 125A. with Fixed thermal &

magnetic release suitable to work on A.C.supply

50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing

G.M.S. housing.

ICS=100% of ICU only Cat III (Make:- Indoasian,

L&T (LK), ABB, Schneider)

213 Providing and erecting Approved make Four pole 2.00 Nos. 16221.61

moulded case circuit breaker having breaking

capacity ICU of 35 KA. at 415 V. having Normal

current rating 200A.with variable Thermal &

magnetic release suitable to work on A.C.supply

50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing

ICS=100% of ICU only Cat III (Make:- Indoasian,

L&T (LK), ABB, Schneider)

214 Providing and erecting Approved make Four pole 1.00 Nos. 20946.39

moulded case circuit breaker having breaking

capacity ICU of 35 KA. and above at 415 V .

having normal current rating 250A. with

variable thermal & magnetic release suitable to

work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III (Make:- Indoasian,

L&T (LK), ABB, Schneider)

Item Description of Item Quantity Unit Rate In Amount

215 Providing and erecting Approved make Four pole 2.00 Nos. 25228.79

moulded case circuit breaker having breaking

capacity ICU of 50 KA and above at 415 V having

Normal current rating 400A. with variable

Thermal & magnetic release suitable to work on

A.C.supply 50 c/s. With all internal connections,

spreader tinned copper & complete erected in

existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III (Make:- Indoasian,

L&T (LK), ABB, Schneider)

216 Supplying & erecting approved make Four Pole 1.00 Nos. 22255.35

415V change over switch interior for panel

mounting with operating mechanism A.C.23 duty

confirming to IS for

(F)400A ,Cat-III (Make:- Indoasian, L&T (LK),

ABB, Schneider)

217 Supplying and erecting triple pole & neutral 14.00 Rn.Mtrs 1961.42

440V / 500V panel mounting Copper Busbars

with four equal Nos. of electrolyte bus having

current density not more than 1.6 Amp. / sq.mm

(Rated current / cross section area) duly

wrapped with colour insulating tape for phase

sequence of following current carrying capacity,

erected with necessary bus bar supports

/insulators, main cable socket to each bar,

erected in existing cubical panel with necessary

connections.(A) Suitable for 100 Amp. Capacity

218 Supplying and erecting triple pole & neutral 8.00 Rn.Mtrs 3202.71

440V / 500V panel mounting Copper Busbars

with four equal Nos. of electrolyte bus having

current density not more than 1.6 Amp. / sq.mm

(Rated current / cross section area) duly

wrapped with colour insulating tape for phase

sequence of following current carrying capacity,

erected with necessary bus bar supports

/insulators, main cable socket to each bar,

erected in existing cubical panel with necessary

connections.(B) Suitable for 200 Amp. capacity

219 Supplying and erecting triple pole & neutral 4.00 Rn.Mtrs 7319.47

440V / 500V panel mounting Copper Busbars

with four equal Nos. of electrolyte bus having

current density not more than 1.6 Amp. / sq.mm

(Rated current / cross section area) duly

wrapped with colour insulating tape for phase

sequence of following current carrying capacity,

erected with necessary bus bar supports

/insulators, main cable socket to each bar,

erected in existing cubical panel with necessary

connections. (D) Suitable for 400 Amp. capacity

Item Description of Item Quantity Unit Rate In Amount

220 Providing and erecting Miniature circuit breaker 124.00 Nos. 112.11

single pole 6A to 25A suitable to operate on

V A.C. system and having breaking capacity

KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat-III (Make:-

Indoasian, L&T (LK), ABB, Schneider)

221 Providing & erecting 240 V MCB double pole 40.00 Nos. 299.97

switch for motor & inductive load (C Curve)

having 10 KA breaking capacity & confirms to IS :

8828 in existing box having following capacity

(A) 6 to 32 Amp. Cat-III (Make:- Indoasian, L&T

(LK), ABB, Schneider)

222 Providing & erecting 240 V MCB double pole 46.00 Nos. 330.27

switch for motor & inductive load (C Curve)

having 10 KA breaking capacity & confirms to IS :

8828 in existing box having following capacity

(B) 40 Amp. Cat-III (Make:- Indoasian, L&T (LK),

ABB, Schneider)

223 Providing & erecting 415 V MCB Four Pole for 40.00 Nos. 668.62

Motor & Inductive Load (C Curve) having 10KA

breaking capacity & confirms to IS :8828 in

existing box having following capacity (b)40

Amp. Cat-III (Make:- Indoasian, L&T (LK), ABB,

224 Providing & erecting 415 V MCB Four Pole for 46.00 Nos. 737.30

Motor & Inductive Load (C Curve) having 10KA

breaking capacity & confirms to IS :8828 in

existing box having following capacity (B.) for

Amp. Cat-III (Make:- Indoasian, L&T (LK), ABB,

225 Sheets steel powder coated enclosure suitable 40.00 Nos. 176.75

for incorporating One/Two nos. MCB.

226 Providing and erecting Sheet Steel powder 40.00 Nos. 629.23

coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (A)

single phase incoming and horizontal single

phase outgoing (b) sheet steel double door (IP-

43) (i)4 way (Make:- Indoasian, L&T (LK), ABB,

Item Description of Item Quantity Unit Rate In Amount

227 Providing and erecting Sheet Steel powder 4.00 Nos. 3412.79

coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (A)

single phase incoming and horizontal single

phase outgoing (B) three phase incoming and

single phase horizontal type outgoing Per phase

isolation type (PPI)

(b) sheet steel double door

(iii)8 way (Make:- Indoasian, L&T (LK), ABB,

228 Providing and erecting Approved make RCCBs 12.00 Nos. 2235.13

conforming to IS: 12640 and having sensitivity of

30 mA and Short Circuit withstand capacity of

KA and suitable for operation on single phase

240 V,50Hz. having characteristic of quick action

& tripping with all advance feature & do not

incorporate any electronic component. for

following Max. rating erected as directed (iI)

Amps.DP Cat. III (Make:- Indoasian, L&T (LK),

ABB, Schneider)

229 Providing and erecting metallic vitrified danger 7.00 Nos. 69.69

notice board as per language suggested by

engineer incharge for MEDIUM VOLTAGE

installation to be erected as per IS-2551.

230 Providing and erecting Annealed bare Copper 125.00 Kgs. 794.87

wire 8 to 16 SWG.

231 Providing and erecting Pipe type earthing having 10.00 Nos. 368.65

150 cms.long and 2.5 cms. dia. galvanised iron

pipe with coupling and buch buried in specially

prepared earth pit complete with necessary

SWG earth wire.

232 For using salt and charcoal / coke as required for 10.00 Nos. 171.70

pipe type earthing.

Item Description of Item Quantity Unit Rate In Amount

233 Supplying & erecting earth pit of minimum bore 8.00 Nos. 4591.46

dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as

per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia

of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant

ohmic value surrounded by highly conductive

compound with high charge dissipation suitable

for following type of applications with chamber

and heavy duty cover. (A)(approved make OEM

has to submit test certificate including value of

earth resistance of installation duly stamped and

signed by agency and officer Incharge has to

ensure the value of earthing resistane mentioned

in test Certificate) & having back filling

compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 ohm / meter testing

as per IEC 62561-2017, Voltage drop:- < 1 volt at

no load & dry form, Sulphar content:- <2%(C)

Back fill Compound :- Earthing compound

should be capable to retain moisture for long

time Necessary test report must be submitted by

(a) For Electrical Installation up to 440V in

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Item Description of Item Quantity Unit Rate In Amount

234 Providing & erecting weather proof, dust & 10.00 Sq.Mtrs 14902.55

vermin proof, floor mounted front operated .

indoor type cubical panel board necessary IP-42

and above protection as per approval from

engineer incharge made from 14 SWG thick CRC

M.S. sheet for outer body & doors, 16 SWG thick

CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats

channel including cutting, bending, drilling,

welding, riveting with internal partitions & cable

alley as per requirements & instruction of

engineer-in-charge with erection of supplied

switch gears, BUSBARS, suitable size of inter

connecting PVC copper wire / copper-aluminium

strips, rubber grommets, rib, bakelite control

fuses/MCB for measuring instruments, earth bus

& earth bolts, foundation flange - bolts-base

Plates, sufficient nos. of hinged doors, handles

with locking arrangement and rubber

gasket,heavy duty end terminal

connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel

shall be painted with epoxy powder coating. (The

rates excludes the cost of switchgears, bus bars,

inter connecting mains & Copper Aluminium

strips, meters, Fuses etc. The dimension shall be

measured excluding base beams) The panel shall

be supplied with following approved

manufacturers with following size.(B) The

standard companies switch gear shall be used

235 Providing , erecting , fabricating the M.S. 250.00 Kgs. 77.77

structure as per requirement on site

incorporating proper size of M.S.

angles,square,round, flats, bars, channels,

sections complete with cutting, welding, grinding

& finishing duly painted with one coat of red

oxide with erection on site as per direction of

engineer in charge with necessary grouting,

cementing, plastering & finishing complete.

Item Description of Item Quantity Unit Rate In Amount

236 Providing and erecting multifunctional meter 7.00 Nos. 14123.84

suitable for application of Power monitoring and

showing measurement of following Voltage,

Frequency, Apparent energy, Apparent power,

Active and reactive energy, Active and reactive

power, Average voltage Vavg, Peak demand

power PM, QM, SM, Demand power P, Q, S,

Apparent power S, S1, S2, S3, Unbalance current,

Power factor and displacement PF (signed, four

quadrant), Calculated neutral current, Active,

reactive, apparent energy (signed, four

quadrant), Active power P, P1, P2, P3, Voltage

U21, U32, U13, V1, V2, V3, Phase currents,

Average current Iag, Peak demand currents,

Reactive power Q, Q1, Q2, Q3, Demand current

I1, I2, I3, [Us] rated supply voltage 40...300 V AC

45...65 Hz, 40...300 V DC, Network frequency

Hz, Type of network 3P, Display type 7 segments

LED, Display colour Red, Messages display

capacity 3 fields of 4 characters, Display digits

digit(s) - 14.2 mm in height

237 Providing and erecting XLPE(IS:7098)(I)-88 ISI 330.00 Mtrs. 90.90

armoured cable Aluminium conductor for

KV. to be laid on wall with necessary clamps or

in existing trench / pipe of following size of

cables. (B) 2 core 6 Sq. mm (Make: -RR Kabel,

Havells, Avocab, KEI,Johnson)

238 Providing and erecting XLPE(IS:7098)(I)-88 ISI 210.00 Mtrs. 217.15

armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables (B) 3 1/2 core 35 Sq. mm

( 16 Sq. mm 1/2 core) (Make: -RR Kabel,

Havells, Avocab, KEI,Johnson)

core) (Make: -RR Kabel, Havells, Avocab,

core) (Make: -RR Kabel, Havells, Avocab,

core) (Make: -RR Kabel, Havells, Avocab,

core) (Make: -RR Kabel, Havells, Avocab,

243 Providing and erecting XLPE (IS:7098)(I)-88 ISI 980.00 Mtrs. 124.23

armoured cable multistrand / Solid Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables (B) 4 core 6 Sq. mm

(Make: -RR Kabel, Havells, Avocab, KEI,Johnson)

Item Description of Item Quantity Unit Rate In Amount

244 Providing and erecting XLPE (IS:7098)(I)-88 ISI 210.00 Mtrs. 151.50

armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables (A) 4 core 16 Sq. mm

(Make: -RR Kabel, Havells, Avocab, KEI,Johnson)

245 Making trench in soft soil of suitable width of 90 1190.00 Mtrs. 46.46

cm deep for laying cable or locating the fault all

over the run and back filling the same and

making the surface as normal ground.

246 Making trench in Hard Murrum / Tar Road of 320.00 Mtrs. 62.62

suitable width of 90 cm or required depth for

laying any size of cable or locating the fault all

over the run and back filling the same and

making the surface as normal ground.

247 (B) If additional machinery like hammer driller 145.00 Mtrs. 360.57

or JCB use [Add]

248 Providing & laying. R.C.C. Hume pipe for cable to 215.00 Mtrs. 343.40

be laid 90 cm. below ground across the road

crossing or on floor with necessary material in

an approved manner and making the ground as

per original.(C) 300 mm dia

249 Providing & laying approved make Double 1258.00 Mtrs. 62.62

walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same

material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable (A) 50 mm Outer Dia

250 Providing & laying approved make Double 70.00 Mtrs. 137.36

walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same

material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable (D) 120 mm Outer Dia

251 Providing & laying approved make ISI marked 85.00 Mtrs. 236.34

Rigid PVC pipe having 6Kg / cm2 (Class-3) to be

erected at road crossing on or floor as directed

for laying of cable. The pipes as following size of

dia & weight per 6 mtr. (F) 110 mm inner Dia.

(11.63 Kg/6 RMT)

252 Providing and, fixing heavy duty flange type 56.00 Nos. 38.38

brass cable gland with rubber ring for PVC

insulated armoured cable complete with out

going tails, insulating tape etc for following size

of cables.(B) 2 to 4 core 6 Sq. mm

253 Providing and, fixing heavy duty flange type 4.00 Nos. 47.47

brass cable gland with rubber ring for PVC

insulated armoured cable complete with out

going tails, insulating tape etc for following size

of cables. (D) 2 to 4 core 16 Sq. mm

Item Description of Item Quantity Unit Rate In Amount

254 Providing and, fixing heavy duty flange type 4.00 Nos. 75.75

brass double compression type cable gland with

rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc

for following size of cables.(B) 3 & 1/2 core

255 Providing and, fixing heavy duty flange type 8.00 Nos. 103.02

brass double compression type cable gland with

rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc

for following size of cables.(C) 3 & 1/2 core

256 Providing and, fixing heavy duty flange type 2.00 Nos. 140.39

brass double compression type cable gland with

rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc

for following size of cables.(E) 3 & 1/2 core

257 Providing and, fixing heavy duty flange type 4.00 Nos. 190.89

brass double compression type cable gland with

rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc

for following size of cables.(F) 3 & 1/2 core

258 Providing and, fixing heavy duty flange type 2.00 Nos. 238.36

brass double compression type cable gland with

rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc

for following size of cables.(G) 3 & 1/2 core

259 Solder less crimping type Aluminium lugs 192.00 Nos. 6.06

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

manner. (A) 1.5/ 2.5/4/6 Sq.mm

260 Solder less crimping type Aluminium lugs 16.00 Nos. 15.15

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

manner. (C) 16/25 Sq.mm.

261 Solder less crimping type Aluminium lugs 16.00 Nos. 20.20

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

manner. (D) 35/50 Sq.mm.

Item Description of Item Quantity Unit Rate In Amount

262 Solder less crimping type Aluminium lugs 32.00 Nos. 25.25

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

manner. (E) 70 Sq.mm.

263 Solder less crimping type Aluminium lugs 8.00 Nos. 45.45

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

manner. (G) 120 Sq.mm.

264 Solder less crimping type Aluminium lugs 16.00 Nos. 61.61

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

manner. (H) 150 Sq.mm.

265 Solder less crimping type Aluminium lugs 8.00 Nos. 80.80

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

manner. ( I ) 185 Sq.mm.

266 Providing and fixing approved make Perforated 60.00 Rmts. 622.16

C type cable tray. Made from sheet steel. The

cable tray should be single or double bended as

per required and as per IS 2062/1079 and shall

be coated with hot dip galvanizing as per IS

2629/4759. with max 17.5% perforation with

coupler plate / Fish plate and GI hardware like

nut - bolt and washers etc. erection with

necessary support( included) as per

Specification and as per instruction of engineer

in charge.. (5) 300 X 50 X 2.0 mm Thick

267 Providing and erecting Approved make Ceiling 161.00 Nos. 1596.81

fan with double ball bearing ISI mark with

condenser A.C. 23OV.50 c/s.1200 mm. sweep

complete, canopy erected on existing hook or

clamp with earthing. [Make shall be approved by

Engineer in charge] (Make:- Crompton, Havells,

268 Supplying and erecting 19 / 20 mm. nominal 161.00 Mtrs. 108.07

bore Medium Class M.S. Pipe down rod erected

duly painted for fan complete with proper

insulation without leckage and earthing.

269 Supplying & erecting fan hook box of 10 mm 161.00 Nos. 108.07

M.S. round bar bounded to the RCC bars up to

50mm length each side and pierced through a

Gauge M.S. box / Heavy Duty PVC box complete

erected concealed in Ceiling with necessary

Item Description of Item Quantity Unit Rate In Amount

270 Supplying & erecting single phase approved 23.00 Nos. 2054.34

make industrial exhaust fan suitable for medium

duty ring mounted low noise operation suitable

for medium duty having following dia size and

maximum speed in RPM [A] 305 mm dia

RPM Cat-II (Make:- Crompton, Havells, Orient)

271 Providing suitable M.S. louver shutter of the 23.00 Nos. 368.65

272 Providing recess in wall or window frame 23.00 Nos. 189.88

suitable for erection of Exhaust fan complete

with plastering and colour washing to match the

colour of the wall or window complete with

expanded metal in order to render the fitting in

accessible and the room water-proof.

273 Supplying and erecting approved make 20.00 Nos. 8192.11

Octagonal pole made from HR sheet steel. The

pole should be made as per IS. and shall be

coated with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend local wind

speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet,

standard profile 35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and arrangement

for cable termination to be erected With Suitable

foundation (Included) as per details given by

manufacturer considering site requirement.(D)

Mtr. Long 70 mm Top X 135 mm bottom dia,

mm thickness with 200mmX200mmX12mm

base plate, 4-M20 Bolts and 600mm long with

necessary G.I. J Bolts .Approx Pole weight 59 kg

274 Providing street light pole bracket comprising 20.00 Nos. 561.56

main B Class MS pipe of 4.2 cm/require outside

dia. complete with suitable B Class M.S. sleeve

tubing of approx. 45cms.length and suitable for

76.5 mm / 80mm. / require size pole top having

sufficient fastners for fixing the brackets and

having spread of 1 mtr. length with suitable rise

as per site condition & suitable welded stiffener

reducer and nipple with check nut complete

painted with one coat of Red oxide / PU base

primer and two coats of Aluminium / PU paint.

paint with following nos of arms. [A] Single Arm

Item Description of Item Quantity Unit Rate In Amount

275 Supplying & erecting approved make SMC press 8.00 Nos. 515.10

moulded composite FRP. loop-in, loop-out

approx. 2mm thick box complete with Bakelite

connector strip 5way(3P+N+E),DIN rail for

mounting mob & hinged doors as per

requirement having locking arrangements with

mounting clamp with nuts, bolts & washers

suitable for erection on pole with cable clamps&

earth bolt of following size of box. (b) 250mm x

200mm x 100mm [deep]

276 Supplying & erecting approved make Digital time 2.00 Nos. 3168.37

switch having lithium cell 6 years operative and

operate battery backup 1 channel day clock with

14 memory programme, suitable to operate on

240V + 5%, 16A with, floating contacts Minimum

switching setup time 1 minimum & LCD display.

Also comprised permanent ON/OFF switching.

Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover

erected as required with necessary connection

erected as directed.

277 Supplying & erecting power contactor ,AC3 duty 2.00 Nos. 2782.55

for time switch complete erected as per direction

Cat III (Make:- Indoasian, L&T (LK), ABB,

Schneider) [D] 4 pole 440V 40 Amp.

278 Supplying & erecting push button type telephone 6.00 Nos. 565.60

instrument having speaker phone Caller ID &

hands free dialing system & 30 memories with

display system Single line [[Approved by

Competent Authority i.e. not Below the rank of

Executive Engineer ]

279 Providing and erecting water cooler having 2.00 Nos. 41342.33

storage capacity 80Ltr. & cooling capacity

Ltr.per hour @ an ambient temp of 45˚ C. The

outlet temp. of the water should drop by 15˚ C

within a hour, The water cooler should be

comprising of hermetically sealed compressor,

fan motor, condensing unit, water tank

surrounded by evaporating coil, thermostats,

relay etc. complete with necessary inlet & outlet

connection. The body of water cooler will be

made from Stainless Steel. (Make:- Blue

Star,Usha,Voltas)

280 Supplying & erecting reverse osmosis (RO) 2.00 Nos. 13053.24

water purification system with M.S. powder

coated pedestal frame, prefilter housing carbon

filter suitable buster DC pump, auto low & high

pressure switches with following size of LPH

capacity & erected as directed [B] 25 Ltr / Hr

with 30 Ltr. Storage Tank

Item Description of Item Quantity Unit Rate In Amount

281 Providing & erecting L.T. Current Transformer 21.00 Nos. 274.72

with bar primary 50/5 to 1000/5 ratio 15 VA

burden erected in existing CRCA box duly

secured with insulating materials connected to

282 Supplying and erecting approved make suitable 21.00 Nos. 43.43

panel indicator LED type lamp, lens cover,

complete erected with necessary connections.

283 Providing & erecting open well horizontal mono 2.00 Nos. 18746.61

block pump set with cast iron body, complete for

three phase submersible motor having[D] For

HP 3 phase open well horizontal mono block

pump set suitable for 1350 LPM to 310 LPM @

10 to 42 Mtr head suitable for 50/65 mm dia

delivery pipe Cat.II

284 Supplying & erecting approved make motor 2.00 Nos. 7722.46

control cubical panel (Direct - on - line) made

from 16 G. CRCA sheet duly epoxy powder

painted inside and outside with hinged doors

and locking, arrangement consisting of suitable

size of ON- OFF isolator (AC - 3/23duty) main

fuses, single phasing preventer, indicating lamps

for R- Y - B phases, overload relay, Automatic

water level controller, Ammeter, Voltmeter each

with two way selector switch incoming, wires

duly socket crimped, main contactor & overload

relay, start - stop push buttons, to be erected on

angle iron frame grouted on wall as directed. The

isolator, overload relay & contactors will be of L

& T, Siemens or BCH make only.(A) DOL up to

285 Lowering of submersible motor pump set 2.00 Job 856.48

complete with required. Nos. and size of casing

pipes erected by means of proper chain pulley

block & pipe wrenches after checking of threads

of each pipe with coupling to take the load of the

pump set and pipe assembly filled up with

water.(d)For Open well Horizontal submersible

pump set for sump well (i) 1 HP to 5 HP

286 Providing and erecting ISI marked PVC insulated 80.00 Mtrs. 146.45

PVC Sheathed Flat flexible Submersible copper

cable approved make of following Size. (C)

Core x 4 Sq. mm

287 Providing Water proof straight Joint in PVC 2.00 Nos. 189.88

insulated flat flexible copper cable by using

insulating material, water proofing material, &

making the joint complete. (A) Up to 10Sq. mm

288 Supplying of following size of HEAVY UPVC 80.00 Rmts. 359.56

column pipe with coupler and wire lock [B]

Item Description of Item Quantity Unit Rate In Amount

289 Supplying, & erecting C.I. swing, check type non- 2.00 Nos. 1020.10

return (Reflux) Valve -ISI marked suitable for

following size (D) 100 mm dia.

290 Supply of following size of TOP & BOTTOM 2.00 Per Set 1489.75

accessories i.e. Adaptor set (CI) long, pump guard

set, starter pipe Rubber ring for submersible

pump & UPVC column pipe as directed by

Engineer - in - charge with necessary plumbing

as desired.[D] 50 mm dia

291 Providing and erecting multi function digital 7.00 Nos. 3636.00

device which can metering voltage and current

with protection features like Under and over

voltage, Under and over current, phase loss

Single phase prevention, neutral loss and earth

fault leakage current protection ref. Model:-MPD-

19EL-M1 of Multispan make, with attached

technical specification. Price included with

adequate size of CBCT.

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in

figures and words) of the estimated rate mentioned above. Amount of my /our

Tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

The Contractor shall exhibit a board with detailed specification and details of work as directed by the

1 Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C.

4 items where there is a change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Deputy Executive Engineer Executive Engineer

( R & B ) Sub Division ( R & B ) Division

Himatnagar Himatnagar