Setting up of Open Gym at Kakkadavu in Tirur Municipality under Annual Plan2025-26 (Project No 123/26)

OPEN GYMNASIUM

2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

50.6.7.1 Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc.

51.2.3 Filling with Quarry Muck <br> Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade

16.68 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

13.1.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

10.26.1 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.M.S. tube

13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.82.2 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour.Two coats

13.52.1 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

OD219733/2025-2026 Fabrication supply conveyance and installation of Granite name board indicating the cost involved, commencement date, completion date and inaguration date etc.

OD219741/2025-2026 Supply and installation of SKY TRAINER DOUBLE Of Product Area : 4.8'Ft x 4.1'Ft , Safe Area : 8.8'Ft x 8.1'Ft for Age Group : 13 Years and above .Users at a Time : 2 Nos , Main frame: 100 NB G.I B-Class pipes. -Jindal make Foot Rest pipe: 40 NB G.I B- Class pipe -Jindal make Foot Rest: LLDP Roto moulded with inbuilt bolts 3/8" x 1.5" Handle: 25 NB G.I B- Class pipe. Rubber: High quality rubber is used for handle grips. Clamps: Nylon 66 injection moulded casing Handle cover: Nylon 66 injection moulded. Bearings: Reputed make (FAG/SKF) Pipe Cap: Nylon 66 injection moulded. Nut bolts: Galvanised nut bolts Powder coat: Done by first coat of Primer – Jotun Brand 40-50 micron thickness and top coat of pure polyester powder with 70- 80

OD219742/2025-2026 Supply and installation of 1 Seating Cum 2 Standing Twister Product Area : 5? x 5? , Safe Area : 10? x 10? , Age Group : 13 Years and above , Users at a Time : 3 Nos. Main frame: 100 NB G.I c-class pipe arm frame: 32 NB G.I b-class pipe handle frame: 20 NB G.I b-class pipe twister disc: lldp rotomoulded seat with inbuilt bolts 3/8" x 1.5". Pipe cap: galvanised cap. Bearing cap: nylon 66 injection moulded. Bearing housing and pin: seamless pipe & round bar nut bolts: galvanised nut bolts nut bolts cap: nylon 66 injection moulded with ss m6 fastners. Bearings: permanent sealed of reputed make (fag/skf) nut bolts: galvanised nut bolts. Powder coat: done by first coat of primer ? jotun brand 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness. Total thickness is 110-120 micron.

OD219745/2025-2026 Supply and installation of Shoulder Twirl double Product Area : 2’10” x 1’2” Safe Area : 8’10” x 6’2” Age Group : 13 Years and above Age Group : 13 Years and above M ain frame: 100 NB G.I pipe w heel frame: 25 NB & 20 NB G.I pipe p ipe cap: galvanised cap. B earing cap: nylon 66 injection moulded. B earing housing and pin: seamless pipe & round bar n ut bolts: galvanised nut bolts n ut bolts cap: nylon 66 injection moulded with ss m6 fastners. B earings: permanent sealed of reputed make (fag/skf) powder coat: done by first coat of primer – jotun brand 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness. Total thickness is 110-120 micron.

OD220198/2025-2026 Supply and installation of FUN CYCLE of Safe Area : 6?8? x 7?8? Product Area : 1?8? x 2?8? for an Age Group : 13 Years and above Users at a Time : 1 Nos M ain frame: 25 NB & 40 NB G.I b-class pipe s eat frame: 32 NB G.I b-class pipe h andle frame: 25 NB G.I b-class pipe p ipe cap: galvanised cap. B earing cap: nylon 66 injection moulded. B earing housing and pin: seamless pipe & round bar n ut bolts: galvanised nut bolts n ut bolts cap: nylon 66 injection moulded with ss m6 fastners. B earings: permanent sealed of reputed make (fag/skf) powder coat: done by first coat of primer ? jotun brand 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness. Total thickness is 110-120 micron.

OD219746/2025-2026 Supply and installation of CHEST PRESS CUM SHOULDER PRESS Product Area : 6.1'Ft x 2.8'Ft Centre pipe: 100 NB G.I B-Class pipe -Jindal make Seat frame: 32 NB G.I B-Class pipe Jindal make Main frame: 40 NB G.I B-Class pipe Jindal make Handle frame & Leg rest: 32NB & 25NB G.I B-Class pipe with two handles Handle cover: Nylon 66 injection moulded. Seat & Back Rest: LLDP Roto moulded seat with inbuilt bolts 3/8" x 1.5" Stopper: PU Rod. 50 mm dia Pipe Cap: Galvanised cap. Bearing Cap: Nylon 66 injection moulded. Bearing housing and pin: Seamless pipe & Round bar Bearings: Reputed make (FAG/SKF) Nut bolts cap: Nylon 66 injection moulded with SS M6 fasteners. Nut bolts: Galvanised nut bolts. Powder coat: Done by first coat of Primer ? Jotun Brand 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness. Total thickness is 110-120 micron.

OD219747/2025-2026 Supply and installation of PENDULUM SINGLE Product Area : 4?5? x 4? Safe Area : 9?5? x 9 Age Group : 13 Years and above Users at a Time : 2 Nos MAIN FRAME: 100 NB GI C-CLASS PIPE LEG FRAME: 40 NB GI B-CLASS PIPE HANDLE FRAME: 25 NB GI B-CLASS PIPE CLAMPS : NYLON 66 INJECTION MOULDED CASING SEAT REST: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8" X 1.5". PIPE CAP: GALVANISED CAP. BEARING CAP: NYLON 66 INJECTION MOULDED

OD219948/2025-2026 Supply and installation of Fun Walker Cum Leg Press Product Area : 10'Ft x 2.5'Ft Users at a Time : 2 Nos Age Group : 13 Years and above Safe Area : 14'Ft x 6.5'Ft Main pipe: 100 NB G.I B-Blass pipe -Jindal make Seat frame: 32 NB G.I B-Class pipe -Jindal make Seat & Back Rest: LLDP roto moulded seat with inbuilt bolts 3/8" x 1.5". Foot Rest: LLDP roto moulded seat with inbuilt bolts 3/8" x 1.5". Leg frame: 32 NB G.I B-Class pipe-Jindal make Handle frame: 25 NB G.I B-Class pipe –Jindal make Clamps: Nylon 66 injection moulded casing Pipe Cap: Nylon 66 injection moulded. Bearing Cap: Nylon 66 injection moulded. Bearing housing and pin: Seamless pipe & Round bar Bearings: Permanent sealed of reputed make (FAG/SKF) Stopper: PU Rod. 50 mm dia Nut bolts cap: Nylon 66 injection moulded with SS M6 fasteners. Nut bolts: Stainless steel M6 x 20, galvanised nut bolts. Powder coat: done by first coat of primer – Jotun Brand 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness.