Construction of Aadarsh Nivashi Shala (Kumar) at Dediapada, Ta:-Dediapada, Dist Narmada

Name of Work : Construction of Aadarsh Nivashi Shala (Kumar) at Dediapada, Ta:-Dediapada, Dist

BILL OF QUANTITIES

Item Description of Item (with brief specification and reference to book of

No. specifications) Quantity Unit Rate Amount

1 Excavation for foundation up to 1.50 MT depth including sorting out and stacking

of useful materials and disposing the excavated stuff up to 50 mt lead (A) Loose & 6687.00 Cu.M 131.07

2 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out

and stacking of useful materials and disposing off the excavated stuff upto 3538.00 Cu.M 309.04

50 Meter lead. (D) Soft rock not requiring Blasting

3 Filling available excavated Earth (Excluding Rock ) in trench plinth side of

foundation etc. in layer not excluding 20 cm in depth consolidation each deposited 4232.00 Cu.M 137.47

layer by ramming and watering etc. complete

4 Filling in foundation and plinth with murrum or selected soil in layers of 20cm.

thickness including watering, ramming and consolidating etc. complete. 2687.00 Cu.M 308.52

5 Providing and laying cement concrete 1:4:8 (1cement : 4 coarse sand : 8 B.T. stone

aggregates 40 mm. nominal size) and curing complete excluding cost of from work 510.00 Cu.M 2825.98

in :(a) Foundation and plinth

6 Providing and laying controlled cement concrete M150 for curing complete

including cost of formwork but excluding the cost of reinforcement for reinforced

concrete work in (A) Foundations, footings,Base of columns,Plinth Slab and Mass 830.00 Cu.M 3783.82

7 Providing and laying controlled cement concrete M250 for curing complete

including cost of formwork but excluding the cost of reinforcement for reinforced

concrete work in (A) Foundations, footings,Base of columns and Mass concrete.

8 Providing and laying controlled cement concrete M250 and curing complete

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Columns, pillars posts and struts Column Up to Plinth 173.00 Cu.M 7836.65

9 Providing and laying controlled cement concrete M-200 and curing complete

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Columns, pillars, posts and struts up to floor two level 507.00 Cu.M 7816.45

for Columns For All Floors.

10 Providing and laying controlled cement concrete M200 and curing complete

including the cost of form work but excluding the cost of reinforcement for 338.00 Cu.M 5822.65

reinforced concrete work For Plinth Beams

11 Providing and laying controlled cement concrete M200 and curing complete

including the cost of form work but excluding the cost of reinforcement for 865.00 Cu.M 6214.17

reinforced concrete work in BEAMS For All Floor.

12 Providing and laying controlled cement concrete M200 and curing complete

including the cost of form work but excluding the cost of reinforcement for 804.00 Cum 6508.60

reinforced concrete work for Slab All floors

13 Providing and laying controlled cement concrete M-200 and curing complete

including the cost of form work but excluding the cost of reinforcement for 224.00 Cu.M 7469.76

reinforced concrete work For Lintels & Sill Level in All Floors

14 Providing and laying controlled cement concrete M-200 and curing complete

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work For Chajja in All Floors

15 Providing and laying controlled cement concrete M-200 and curing complete

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in STAIR CASES for All floor

16 Providing and laying controlled cement concrete M-200 and curing complete

including the cost of form work but excluding the cost of reinforcement for 137.00 Cum 8915.57

reinforced concrete work in Vertical Walls for All Floor

17 Providing TMT bar reinforcement of Fe-500D for R.C.C. work including bending

binding and placing in position complete for All Floor 653950.00 Kg. 78.60

18 Proving & Fixing Chicken mesh for joint between brick work & RCC work fixing

with nail & GI washer as per director in Charge 717.00 Sq.M 74.74

19 Brick Work using Common Burnt Clay Building Bricks having crushing strength not

less than 35 Kg/sm. in super structure Above plinth level up to floor two level in

cement mortar (1:6) ( 1 cement : 6 fine sand) (Conventional) For All Floors

20 Half brick masonry in common brunt clay building bricks having crushing strength

not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in

super structure above plinth up to floor two level Conventional Bricks for All 1571.00 Sq.M 698.89

21 Providing throating or plaster drip and moulding to R.C.C. chhajja by making 5mm

to 15 mm wide groove as per design etc. complete 325.00 Rmt 44.07

22 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single

or half brick walls for interior plastering upto floor two level and finished even and 10800.00 Sq.M 195.95

smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

23 Providing 10mm thick cement plaster (mala troweled finish) in single coat on

Celling,& Soffits of Stair, concrete wall for interior plastering finished even and 12086.00 Sq.M 199.24

smooth in (ii) cement mortar 1:3 (1 Cement : 3 Sand) For ALL Floors

24 20 mm thick Sand faced Gutka cement plaster with 1x1 cm grooves as suggested

by this office consisting of 12 mm thick backing coat of C.M. 1:3 ( 1 cement :

coarse sand ) and 8 mm thick finishing coat of C.M. 1:1 ( 1 cement : 1 coarse sand) 9684.00 Sq.M 357.47

for all heights as directed etc. complete.

25 Providing Water proofing Treatment on Sunk Slab including cement concrete

flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded stone aggregate 20mm nominal

size) laid in one layer and finished with a floating coat of neat cement average 750.00 Sq.M 373.70

50mm thick to Prepare slope including water proofing chemical etc. Complete for

Sunk Slab All Floor.

26 Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm. Length for Sunk

Slab or as directed by Engineer in Charge etc complete. 29.00 No 101.91

27 Applying two coats of Birla or Asian (or equivalent) acrylic lapy ( putty) & two

coats of primer of approved brand and manufacture on new wall surface to give

an even shade including thoroughly brushing the surface free from mortar 16163.00 Sq.M 40.59

dropping and other foreign matter and sand papered smooth.

28 Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign 7690.00 Sq.M 84.82

matter and sand papered smooth.

29 Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on ceiling and soffits of slab surface to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign

matter and sand papered smooth.

30 Wall painting two coats with weather proof acralic emulsion APEX type paint of

approved brand & manufacture and of required shade on exterior wall surface to

give an even shade over and including a primery coat with alkaly resistance primer

of approved brand after throughly brushing surface to remove all dirt and remains 9594.00 Sq.M 122.14

of loose powdered materials etc comp. for all height.

31 Providing and fixing 60 x 60 CM Machine cut, free edges, mirror polished Blue

Kotah stone slab flooring 25 mm thick laid on 20 mm thick cement mortar 1:6 (

cement:6 coarse sand) jointed with matching pigment & cement slurry including 3005.00 Sq.M 1184.62

rubbing and polishing finishing etc. complete.

32 Providing and fixing 60 x 60 CM Machine cut, free edges Blue Kotah stone slab

flooring 25 mm thick laid on 10 mm thick cement mortar 1:3 ( 1 cement:3 coarse

sand) for Skirting & Riser including jointed with matching pigment & cement slurry 167.00 Sq.M 1205.60

including rubbing and polishing finishing etc. complete.

33 Providing and laying Machine Cut free edges, Machine polished Granite Stone slab

18 mm thick single peace For Stair,Steps,landing as per design incl. full moulded

round front edge and 1cm nosing and necessary groove on trade of steps laid on

20 mm thick cement mortar 1:6 (1 -cement : 6 coarse sand ) jointed with grey

cement slurry including rubbing,polishing & Finishing etc. complete

34 Providing and fixing machine cut, free edges, pre mirror polished Green marble

stone slab 18 mm thick (single piece not less than 150 cm ) for vertical

wall/Doors/Windows Sill,Jams for cladding as per design including full moulded

round inside edge and laid on 10 mm thick cement mortar 1:3 ( 1 cement: 3 724.00 Sq.M 1730.13

coarse sand) jointed with grey cement slurry including rubbing and polishing

finishing etc. complete.

35 Providing and fixing Machine cut Double polished kota stone in single piece (Max

150 cm long and width upto 45 cm with both side polished) for horizontal Shelves

including making grooves & Fixing the Same finished with flush pointing, round 5.00 Sq.M 451.47

open edge etc complete

36 Providing and fixing Machine cut & Polished kota stone in 7.5 CM width Strip

flooring for Ramp even grade over 20mm (Average) thick base of cement mortar

1:6 (1-cement : 6-coarse sand) laid over and jointed with grey cement slurry mixed 26.00 Sq.M 1154.43

with pigment to match the shade of slab including rubbing and polishing etc.

complete. (A) 25mm thick

37 Providing and laying coloured matt finished Anti skid ceramic tiles of the size

mm x 300 mm in skirting, risers of steps and landing laid on a bed of 12 mm thick

cement mortar 1:3(1-cement:3-coarse sand)finishing with flush pointing in white 550.00 Sq.M 1045.45

cement etc. complete. Colour and Shade approved by Engineer-In-Charge

38 P & L Colour glazed vetrified tiles size 30 x 45 cm 6 mm thick in skirting risers of

steps and dedo on 10 mm thick cement plaster 1:3 (1-cement:3coarse sand) and

jointed with colour cement slurry

39 Providing and laying water proofing treatment with china mosaic tiles flooring

over avg 50 mm C.C. 1:2:4 bedding for maintaining slope for plain and curve

surface & 12 mm to 20 mm of broken piece not more than 2.5CM of ceramic /

glazed tiles ( one for more colour as directed ) to be laid over cement mortar

bedding of C M 1:3 (1 cement : 3 sand ) contain water proofing materials per bag

of cement useas specified by manufactured and slops to be tempered to bring 2350.00 Sq.M 1164.53

mortar up to surface with using white cement and colour pigment including

rounding of junctions and extending them up to 15 cm along the wall and curing

with bends any patens or design as per drawing and cleaning by using oxalic acid

40 Constructing Sandwich Platform of 18 mm thick Polished Black or selected

Granite at top and 25 mm thick Kota stone slab With 75CM height with necessary

Support using 20mm thick cement mortar 1:3 for sandwich and fitting at bottom &

edges with waterproof rigid adhesives including making necessary grooves in

walls with Vertical support of double Kota stone sandwich every 60 cm centre to

centre including all labour material of approved quality including full moulded

round front edge fixed in wall for partition and jointed with grey cement slurry

including rubbing and polishing etc. complete

41 Providing and Fixing of 35 mm thick Single Shutter of Water proof, weather prrof,

acid, alkaly Resistant & Gel Coat finish FRP Flush Door, Designed with polyol foam 235.00 Sq.M 8585.00

core material & 1.5 mm thick skin as approved by the architect.

42 Providing and fixing Double Shuttered Door having Green marble Frame with all

Open Edges machine cut & Machine polished, Fixed by zinc coated Hinges with

double shutter of factory made & stamped IS 12823 Garde one, Type one 35 mm

thick. Solid core, Melamine Faced, Three Layred resin, Flushed door, Having 20.00 Sq.M 2311.89

Decorative Laminated on both sides & 12 mm thick T.W. Beading Fixed Around the

door from Novapan or Equivalent Company Holding Licence For Minimum 5 years.

43 Providing and fixing Single Shuttred Door Having Green Marble Frame with all

open edges machine cut & machine polished fixed by zinc coated hinges with

Double shutter of factory made & stamped I.S. 12823 Garde one, type one 35 mm

thick solid core melamine faced, Three layred Resin, Flushed Door, having 120.00 Sq.M 2755.28

Decorative Lamination on both sides & 12 mm thick Beading fixed around the

door, from Novapan or Equilvalent company holding Licence for minimum 5 Years.

44 Providing and fixing Three Track window (3 Shutter) having extruded aluminum

Colour anodized section frame main outer size 95mm x 24.10mm x 1.17mm @

wt.of 0.738 Kg/mt , horizontal Three track member size 92mm x 31.75mm x

1.50mm,@ Wt.1.07 Kg/mt , vertical member of size 92mm x 31.75mm x 1.50mm

@ Wt. 1.06 Kg/mt with sliding shutters of horizontal member size 40 mmx18mm

x1.29mm @ wt.of 0.456 Kg/mt, vertical member of size 40mm x 18mm x 1.29 mm 200.00 Sq.M 1583.95

@ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float glass

with powder coated aluminum fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details etc

45 Providing and fixing Two Track window (2 shutter) having extruded aluminum

Colour anodized section frame main outer size 95mm x 24.10mm x 1.17mm @

wt.of 0.738 Kg/mt , horizontal Two track member size 92mm x 31.75mm x

1.50mm,@ Wt.1.07 Kg/mt , vertical member of size 92mm x 31.75mm x 1.50mm

@ Wt. 1.06 Kg/mt with sliding shutters of horizontal member size 40 mmx18mm 73.00 Sq.M 1895.65

x1.29mm @ wt.of 0.456 Kg/mt, vertical member of size 40mm x 18mm x 1.29 mm

@ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float glass

with powder coated aluminum fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details etc

46 Providing and fixing Two Track window (4 shutter) having extruded aluminum

Colour anodized section frame main outer size 95mm x 24mm x 1.17mm @ wt.of

0.738 Kg/mt , horizontal Two track member size 92mm x 31.75mm x 1.30mm,@

Wt.1.07 Kg/mt , vertical member of size 92mm x 31.75mm x 1.50mm @ Wt.

Kg/mt with sliding shutters of horizontal member size 40 mmx18mm x1.29mm @ 20.00 Sq.M 1521.06

wt.of 0.456 Kg/mt, vertical member of size 40mm x 18mm x 1.29 mm @ wt.of

0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc

47 Providing and fixing standared extruded of alluminium section of size 65mm x

mm with colour anodized alluminium frame with 5 mm thick Ground glass 50.00 Sq.M 1961.42

louvers And Fixed Mosquito Net.

48 Providing and fixing kitchen platform trolley having three drawers of SS (IS 304) of

required size like partition type in kitchen platform having drawer front side and

backside by using 19mm thick all proof plywood of ISI quality all side laminated

etc. as directed. The size of SS (IS 304) basket of size 4" to 18" for tperforated, 54.00 Sqmt. 12645.20

partition type as directed including necessary S.S. fittings, handles, nobs,

telescopic channels, etc. as directed

49 Providing and fixing 90 cm high Stainless Steel railing made from anticorrosive

grade S.S. pipe of 50 mm dia (16 gauge) as hand rail with S.S. 304 grade baluster of

32 mm dia (16 gauge) as a vertical support fixed in RCC slab / steps of stair at

Mt. c/c including three horizontal S.S. pipes of 16 mm dia (16 Gauge) at equal 340.00 Rmt 2377.54

distance fixed by 16 mm dia (16 Gauge) S.S. pipe with baluster including

accessories as per detailed drawing as directed etc. complete.

50 Providing and Fixing 6 mm thick Lexan Polycarbonate multi wall roofing sheet fixed

with hilti screw and rubber silicon sealer and alluminium strip of size 50 x 3 mm etc 110.00 Sq.M 1441.90

complete as directed by Engineer in charge.

51 Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of

required capacity each with all necessary fittings and connection etc. complete on 72000.00 Liter 3.95

52 Providing, laying and jointing in true line and level 110 diameter U.P.V.C SWR

(Type B) Pipe conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm 1160.00 Rmt 897.79

diameter x 149 mm length x 145 mm height at every 2000 mm centre to centre or

shall be concealed in walls as directed including necessary fittings such as bends,

"Y" "T" shoes etc. including testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

53 Providing, laying and jointing in true line and level U.P.V.C. SWR Type B Pipe

conforming to IS 13592-1992 with one end plain and other end socketed with

rubber ring, & fitting conforming to IS 14735-1999 of approved make for drainage

system pipeline, pipe shall be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using PVC Clamp of the size 160mm dia x 210 mm length x

196 mm high at every 2000 mm centre to centre or shall be concealed in walls as

directed including necessary fittings such as bends, shoes, tees, etc. including

testing of pipes and joints and jointed with adhesive solvent cement including

cost of all materials

54 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX

or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be concealed as directed 2000.00 Rmt 198.86

including necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

55 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX

or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be concealed as directed 1320.00 Rmt. 148.12

including necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials. 40mm dia

56 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX

or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be concealed as directed 2235.00 Rmt. 91.84

including necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials. 25mm dia

57 Providing and fixing concealed centre point to wall ceiling & floor CPVC (SDR 13.5)

Pipe having National Sanitation Foundation (NSF) seal for potable water of

following dia. Nominal bore tube fitting and clamps including making good the 450.00 Rmt. 253.82

wall, ceiling, and floor, etc. complete 25 mm dia

58 Providing and fixing concealed centre point to wall ceiling & floor CPVC (SDR 13.5)

Pipe having National Sanitation Foundation (NSF) seal for potable water of

following dia. Nominal bore tube fitting and clamps including making good the 206.00 Rmt. 170.36

wall, ceiling, and floor, etc. complete 15 mm dia

59 Providing and fixing Gun metal check or non-return full way wheel valve.(D) 50mm

60 Providing and fixing Gun metal check or non-return full way wheel valve.(E) 40mm

61 Providing and fixing Gun metal check or non-return full way wheel valve.(C) 25mm

62 Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal (ii)

63 Providing and fixing wash down water closet (European W.C. Pan) with integral P

or S trap and PVC dual flush tank with complete fittings including cutting holes in

walls and making good the same connecting the flush bend with cistern and closet

etc. complete including plastic seat cover, water jet and including jointing trap 68.00 No 3227.96

with Waste pipe overall size as per the selection of the Model by E.I.C. or as

64 Providing & fixing of first quality (ii) Flat Back washbasin 550 mm x 400mm size. (i)

In white colour. including with approved sanitary grade material with C.P waste

coupling, waste pipe, 15mm dia Pillar & Stop Cock of approved brand with 45.00 No 2147.26

connection 15mm dia flexiable pvc pipe etc. complete

65 Providing, laying and filling 50mm thick expansion joint by hydro cell semi rigid UV

resistance with high performance laminated closed cell polyyhene foam joint filler 574.00 Sq.Mt 1491.03

in sheet foam as directed etc.complete.

66 Providing and fixing screw down bib taps of following size.(B) Brass chromium

plated screws down Bib Tap. (i) 15mm dia. 160.00 No 186.83

67 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter

with jali of the following nominal diameter of self cleansing design with C.I scread

down or hinged grating including the cost of cutting and making good the walls.

68 Providing and fixing Jet spray to connect wall mount w.c with 1.5 mtr long plc.

heavy duty supply pipe with two side male female checknut etc. complete. 61.00 No 308.99

69 Providing and fixing S.W. Gully trap with C I grating brick masonry chamber and

water tight C I cover with frame of 300 x 300 mm size (inside) with standard weight 95.00 No 1246.92

(i)square mouth traps (C) 150 mm x 100 mm size P or R type

70 Providing and fixing C.P. brass towel rail complete with C.P. Brass brackets fixed to

wooden plugs with C.P. Brass screws, (B) 600mm x 20 mm size 74.00 No 616.42

71 Providing and fixing 600mm x 450mm Bevelled edge glass mirror of superior glass

mounted on 6mm the A.C. sheet or plywood sheet & fixed to wooden plugs with 38.00 No 859.41

C.P. brass screws and washers.

72 Providing and fixing in position PVC cowel went to pipes.(C) 160mm dia 32.00 No 75.75

73 Providing and fixing in position PVC cowel went to pipes.(B) 110mm dia. 32.00 No 50.50

74 Providing and fixing to wall, ceiling and floor 10.0 Kg f/cm2 working pressure

polyethylene pipes of the following outside dia. Low density, complete with special

flange compression type fittings wall clamps etc. including making good the wall, 3275.00 Rmt. 339.05

ceiling and floor. (G)110 mm

75 Constructing brick masonry chamber for under ground C.I. Inspection chamber

and bends with bricks having crushing strength not less than 35 Kg/cm2 in cm. 1:5

C.I. Cover with frame (light duty) 455 mm. X 610 mm. Internal dimensions, Total

weight of cover with frame to be not less than 38 Kgs. weight of cover 23 Kg. and

wt. of frame 15 Kg) R.C.C. top slab with 1:2:4 mix(1 cement : 2 coarse sand :

graded stone aggregate 20 mm. size ) foundation concrete 1:5:10 inside plaster 15 165.00 No 3660.76

mm. thick with cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls & abed concrete etc. complete.(ii) Inside dimensions, 500 mm. x

700 mm. and 450 mm. Deep for pipe line with one or two inlets.

76 Applying general insecticide pest control treatment to floors, cupboards etc.

including labour material etc. complete. Using Imidacloprid 30.5 SC As Per IS

part-III (0.075% Concentration by mass) is recommended 10.5 ml chemical dilute

with 5 litters of water application 0.5 Litre chemical / Sq.M of surface is

recommended as per I.S

77 Providing and laying (Two level or slopes) and jointing with stiff mixture or cement

mortar in proportion 1:1, salt glazed stone ware pipes including testing of pipes

and joints etc. complete and Providing and laying Cement concrete 1:5:10 (1-

Cement : 5-Fine sand :10-Graded stone aggregate 40mm nominal size) bedding for 1750.00 Rmt 556.90

stoneware pipes (166mm Ave. bed thickness) of following internal diameters with

necessary formwork and curing complete.(B) 150mm dia.

78 Providing and laying (Two level or slopes) and jointing with stiff mixture or cement

mortar in proportion 1:1, salt glazed stone ware pipes including testing of pipes

and joints etc. complete and Providing and laying Cement concrete 1:5:10 (1-

Cement : 5-Fine sand :10-Graded stone aggregate 40mm nominal size) bedding for 1280.00 Rmt 352.74

stoneware pipes (166mm Ave. bed thickness) of following internal diameters with

necessary formwork and curing complete.(B) 110mm dia.

79 Providing and laying (to level or slope) and jointing reinforced concrete not

pressure pipes IS class NP 2 of the following internal diameter with collars and nut

ends prepared for collar joints including testing of joints complete 300 mm dia

80 Providing and laying in trenches jointing in true line and level 50mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL

/ FINOLEX or equivalent as approved by Engineer In Charge, including necessary

fittings etc. including testing of pipe and joints and fixing the same with adhesive 1020.00 Rmt 195.67

solvent, including cost of excavation & refilling the same with all materials.

81 Providing and fixing Safety Grills of required pattern for windows/door using

16mm x 16 mm square M.S. polished bars, Required at required spacing as per

design and hold fast with coach bolts including one coat of primer and two coats 9151.00 Kg. 116.91

of matt finished oil painting etc. complete.

82 Providing plinth protection to building including excavation in ordinary soil and

laying cement concrete 1:4:8 using stone aggregates of 40mm nominal size in

foundation layer 0.10 mt. thick below pre-cast Rubber Dye inter locking concrete

block 60mm thick with grade of concrete M200 pneumatic compressed by

mechanically pressed and as per approved design including 75mm Sand layer for

levelling and filling the joint with sand in proper line and level etc. complete, 567.00 Sq.M 1313.00

Including Providing and fixing pre-cast concrete kerb stone of grey cement based

concrete block 30cm length,30cm height and 15cm thick of M250 grade concrete

as per approved design and including excavation for fixing in proper line and level,

filling the joint with C:M 1:3 (1cement:3fine sand) etc. complete.

83 Providing and fixing in position 300 mm high, 150 mm wide English/Gujarati letters

made from 1.0 mm thick stainless steel sheet as directed by Engineer-in-charge

with all necessary tools & plants etc. complete.

84 Providing and fixing in position 150 mm high, English/ Gujarati letters made from

1.0 mm thick stainless steel sheet as directed by Engineer-in-charge with all

necessary tools & plants etc. complete.

85 Providing and Fixing 15 mm thick 300 mm x 300 mm Tactibe Warning Tiles

(Attention Tilesi .e. Tactile Warning Surface |Indicator (TWSI)}) of Johnsan Endura

Tac Button Yellow Plus or equvglent make in flooring laid on 20 mm thick cement

mortar 1:6 (1 cement : 6 coarse sand) on new surface and jointod with cement

slurry including finished with flush pointing & cleaning the surface for all loors as

per detailed dravwing ctc. complete as directed by Architect or Engincer in 30.00 Sq.Mt 1207.96

charge.Thse tiles shall be Anti Skid, Chemical Resistant, Fade Proof, Frost - lleat &

Weather Proof, High Flexural Strength, Highly Durable, Stain Resistance . All Tactile

Warning Tiles meet the specific size and dimension standards as required by

86 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block

60mm thick with grade of concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design Confirming to IS 15658 : 2006 including

35 mm Sand layer for levelling and filling the joint with sand in proper line and

level as per guidlines of IRC : SP 63-2018 etc. Complete.

87 Wall painting (three coats) of plastic paint with one wall highlight in special effect

(royal play) colour, shade and colour of approved brand and manufacture on

undecorated wall surface to give an even shade including throughly brushing the 3110.00 Sq.M 128.38

surface free from mortar droppings and other foreign matter and sand papered

88 Wall painting (three coats) with plastic emulsion paint of approved brand and

manufacture on ceiling and soffits of slab surface to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign 3770.00 Sq.M 90.48

matter and sand papered smooth.

89 Providing and laying 60 x 60 Cm Soluble Salt vitrified 10 mm thick Tiles in flooring

over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on

new surface or fixing on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color cement slurry including

finised with flush pointing & cleaning the surface etc. complete for light shade

90 Providing and laying Soluble Salt vitrified 10 mm thick tile Tiles in skirting, risers of

steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and 125.00 Sq.M 830.22

pointing in white cement with white cement slurry

91 Providing and fixing machine cut, free edges, pre mirror polished Grenite marble

stone slab 18 mm thick (single piece not less than 150 cm ) for vertical

wall/Doors/Windows Sill,Jams for cladding as per design including full moulded

round inside edge and laid on 10 mm thick cement mortar 1:3 ( 1 cement: 3 313.00 Sq.M 1730.13

coarse sand) jointed with grey cement slurry including rubbing and polishing

finishing etc. complete.

92 P & L Colour glazed Ceramic tiles size 60 x 30 cm 6 mm thick in skirting risers of

steps and dedo on 10 mm thick cement plaster 1:3 (1-cement:3coarse sand) and

jointed with colour cement slurry

93 Providing and fixing Single shutter 35mm Thick door solid core wooden flush

shutter conferming to IS:2202 & ISI approved manufacture, covered with 1 mm

thick laminates on each side of shutter, 6 mm thick polished teak wood beading on

periphaery, 150 mm-200 mm S.S. Handles and S.S. Fixtures & Locking Arrangement 232.00 Sq.M 5955.97

on Each shutter, fixed with 4 Nos. 150 mm High S.S. hinges Complete as directed

by Engineer in charge

94 Providing and fixing jindal E (30 mm) series Three track alluminimum window (3

shutter +1 Mosquito net shutter) standard extureded colour anodized section with

frame having frame bottom member jindal section no:20928 @ wt. of

kg/Rmt, frame side and top member jindal section no.:20837 @ wt. of

Kg/Rmt with sliding shutters of single glass shutter top bottom member Jindal

section no.20993 @ wt.of 0.839 Kg/Rmt & side member jindal section no. 20550 @ 90.00 Sq.M 8115.35

wt. of 0.994 Kg/Rmt & inter lock member jindal section no. 20549 @ wt. of

Kg/Rmt. with 5 mm thick transperent plain float glass in shutter including fitting,

fixtures, rubber gasket and transperent silicon seleant as per drawing and

instruction of engineer in charge etc. completed for Window Three Track

95 Providing and fixing jindal E (30 mm) series Three track alluminimum window (2

shutter + 1 Mosquito net shutter) standard extureded colour anodized section

with frame having frame bottom member jindal section no:20928 @ wt. of

kg/Rmt, frame side and top member jindal section no.:20837 @ wt. of

Kg/Rmt with sliding shutters of single glass shutter top bottom member Jindal

section no.20993 @ wt.of 0.839 Kg/Rmt & side member jindal section no. 20550 @ 37.00 Sq.M 4270.53

wt. of 0.994 Kg/Rmt & inter lock member jindal section no. 20549 @ wt. of

Kg/Rmt. with 5 mm thick transperent plain float glass in shutter including fitting,

fixtures, rubber gasket and transperent silicon seleant as per drawing and

instruction of engineer in charge etc. completed for Window Three Track

96 Providing and fixing in position standared extruded approved colour anodised

aluminum vantilation with outer frame of (Jindal section No. 21458 @ wt 0.658 kg/

Rmt ) with 5 mm thick bajari figure adgesteble tinted louvers glass fixed to 31.00 Sq.M 1961.42

alluminimum strip blade including fixtures, fastening, labours and equipments as

per detailed drawing as directed. For ventilation

97 Providing and fixing Water Closet Squatting Pan (Indian Type W.C. Pan) size

580mm Integral Foot Rest Type (A) Vitreous China.(I) Long pattern = White colour

including 100mm size P or S trap for water closet squatting pan including jointing

the trap with the pan and soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine sand) 15.00 No 1678.67

with 25mm dia. Chromium plated brass half trun flush cock of approved quality

including fixing in pipe line G.I. inlet connection for flushing W.C. Pan etc.

98 Providing and fixing brass screw down stop tap.(A) 15mm dia. make as approved

by Engineer In Charge. 15.00 No 205.83

99 Providing and fixing kitchen sink painted white with C.I. or M.S. brackets M.I. Fiber

union 32 mm dia. C.P. brass waste 32 mm dia. 15 mm stop cock etc. completed,

including cutting holes in walls and making good the same but excluding fittings, (C 15.00 Nos. 3149.18

) Vitreous China Sink (i) 600 mm X 450 mm X 150 mm Size

100 Providing and fixing Kotastone shelves (size 150 x 300mm) as approved by

Engineer In Charge. 8.00 Sq.mt. 220.25

101 Providing and fixing Granite shelves (size 150 x 300mm) as approved by Engineer

In Charge. 5.00 Sq.mt. 3689.55

102 Steel work, riveted in built up sections framed work including cutting, hoisting,

fixing in position and applying a priming coat of red lead paint. (A) In beams and

joists, channels angles Tees, flats, with connecting plates or angle cleats as in main 88.00 Quintal 7828.20

and cross beams. Hip and jack rafters, purlins conneted to common rafters and the

103 Providing and fixing post and pipe railing as per detailed drawing including 3 coats

of painting to steel works complete. 17.00 Rmt 1210.38

104 Filling in plinth with sand under floors including watering ramming, consolidating

and dressing etc. complete. 30.00 Cu.M 489.28

105 P & L Colour glazed tiles size 60 x 30 cm 8 mm thick in skirting risers of steps and

dedo on 10 mm thick cement plaster 1:3 (1-cement:3coarse sand) and jointed with

colour cement slurry

106 Providing and fixing jindal E (30 mm) series Four track alluminimum window (3

shutter + 1 Mosquito net shutter) standard extureded colour anodized section

with frame having frame bottom member jindal section no:21998 @ wt. of

kg/Rmt, frame side and top member jindal section no.:21204 @ wt. of

Kg/Rmt with sliding shutters of single glass shutter top bottom member Jindal

section no.20993 @ wt.of 0.839 Kg/Rmt & side member jindal section no. 20550 @ 6.00 Sq.M 4235.94

wt. of 0.994 Kg/Rmt & inter lock member jindal section no. 20553 @ wt. of

Kg/Rmt. with 5 mm thick transperent plain float glass in shutter including fitting,

fixtures, rubber gasket and transperent silicon seleant as per drawing and

instruction of engineer in charge etc. completed for Window Three Track

107 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure

poluthene pipes of the following outside Dia. Low densidy, complete with special

falnge compression type fittings, wall clipsetc. including making good the wall 600.00 Rmt. 515.27

ceiling and floor.(G)160 mm

108 Providing junction for rain water juncton chamber of size 0.60x0.60x0.75m with

excavation of size 1.96x1.96 m & 0.15m thick c.c.1:2:4 bed concrete including brick

masonary wall in CM 1:6 of 0.75m height & 0.23m thick with 15mm thick cement

plaster inside & outside & 1.06x1.06 RCC (1:2:4) slab of thickness 0.15m with CRS 80.00 Nos. 7087.17

steel and 0.60mx0.45m cast iron manhole cover with frame weight not less than

35 kg as per directed by Engineer-in-charge

109 Providing Filter chamber of Brick work in C:M 1:6 of size 2.06mx1.20m x1.20m &

excavation dimension of 2.82mx 1.96x1.35m including C.C 1:2:4 bed concrete of

0.15m thick including brick work in c.m 1:6 for 23cm thick wall including 15mm

thick cement plaster inside & outside with cement slurry & 10cm thick RCC 1:2:4

top cover with frame of minimum weight of 35 kg & filling filter material kapchi in

layers (25-40mm & 10-20mm) & BT metal 40mm & sand as per directed by

Engineer-in-charge.

110 Providing Recharging pit of size 2.0m Dia.& 2.0m depth of water logging with

excavation filling the pit with gravel & sand in layers including making 300mm dia

bore depth of 4.5mt & above concrete with kapchi in layers (25-40mm & 10- 8.00 Nos. 9980.82

20mm) & BT metal 40mm & filling brick as directed by Engineer-in-charge.

111 Excavation for foundation for depth from 3.0 m to 5.0 m including sorting out

and stacking of useful materials and disposing off the excavated stuff upto

50 Meter lead (E) Hard Rock

112 Brick work using common burnt clay building bricks having crushing strength not

less than 35 Kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement 627.00 Cum 4279.98

: 6 -fine sand) (B) Conventional.

113 Constructing brick masonry chamber for underground C.I. Inspection chamber and

bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5

C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions, total

weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt.

of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-

graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 10.00 No 2932.93

15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete.(i) Inside dimensions 455mmx

610mm and 450mm deep for single pipe line.

114 Constructing brick masonry chamber for underground C.I. Inspection chamber and

bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5

C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions, total

weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt.

of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-

graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 5.00 No 7180.44

15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete.(iii) Inside dimensions 600mm x

850 mm and 450mm deep for pipe lines with three or more inlets.

115 Providing and laying (two level or slopes) and jointing with stiff mixture of Cement

Mortar in proportion 1:1, Salt glazed stone ware pipes of pipes 150mm laying lime

concrete 1:2:4 (1-Lime putty :2-Fine samd : 4-Graded brick aggregates 40mm

nominal size) bedding for stoneware pipes of following internal diameters with

necessary formwork and curing complete.

116 Providing cement vata (10cm x 10cm size) quarter round in cement mortar 1:1

including neat cement finishing watering etc. Complete 76.00 Rmt 24.28

117 Providing 20 mm thick double coat mala cement plaster on interior brick /

concrete work for plastering comprising of base coat of 12 mm thick cement

plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm

thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel

including scaffolding curing etc. complete. For Ground floor

118 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not

less than 35Kg. 3.00 Nos. 958.17

119 Providing & erecting open well horizontal mono block pump set with cast iron

body, complete for three phase submersible motor having [H]For 15 H.P,3 phase

open well horizontal mono block pump set suitable for 1600 LPM to 1025 LPM @ 8.00 Nos 36107.50

33 to 42 MTR head suitable for 65/80 mm dia delivery pipe

120 Distempeing (Two coats) with oil bound distemper of approved brand and

manufacture and Washable of required shade on wall surfaces to give an even

shade, over and including a priming coat with distemper primer of approved brand

and manufacture after thoroughly brushing the surface free from mortar dropping

and other foreign matter and also including preparing the surface even and sand

papered smooth.

121 Distempeing (Two coats) with oil bound distemper of approved brand and

manufacture and Washable of required shade on Celling and sloping roof to give

an even shade, over and including a priming coat with distemper primer of

approved brand and manufacture after thoroughly brushing the surface free from 137.00 Sqmt 85.85

mortar dropping and other foreign matter and also including preparing the surface

even and sand papered smooth.

122 Providing and fixing rolling shutters of approved make made of 80 mm wide M.S

laths inter-locked together through heir entire length and jointed together at the

ends by end locks mounted on specially designed pipe shaft with bracket

plates,guide channels and arrangement for inside and outside locking with push- 26.00 Sqmt 3784.54

pull operation including the cost of hood cover and sprig etc.complete(A) Shutters

having width Above 3.5M

123 Providing and Supplying ISI Standard R.C.C. Pipes (of Sulphate Resisting Cement) in

Standard length of Following Class and Diameter suitable for either coller joints or

Rubber ring joint including all taxes, insurance, Transpotation, fright charges,

octroi, inspection charges, loading, unloading, conveyance to departmental stores, 110.00 Rmt 762.55

stacking etc. Class NP3 Test Pressure 0.7 Kg/Sq.Cm. (i) 300 mm dia.

124 Providing and Supplying ISI Standard R.C.C. Pipes (of Sulphate Resisting Cement) in

Standard length of Following Class and Diameter suitable for either coller joints or

Rubber ring joint including all taxes, insurance, Transpotation, fright charges,

octroi, inspection charges, loading, unloading, conveyance to departmental stores, 150.00 Rmt 421.17

stacking etc. Class NP3 Test Pressure 0.7 Kg/Sq.Cm. (i) 200 mm dia.

125 Providing and Supplying ISI Standard R.C.C. Pipes (of Sulphate Resisting Cement) in

Standard length of Following Class and Diameter suitable for either coller joints or

Rubber ring joint including all taxes, insurance, Transpotation, fright charges,

octroi, inspection charges, loading, unloading, conveyance to departmental stores, 40.00 Rmt 334.31

stacking etc. Class NP3 Test Pressure 0.7 Kg/Sq.Cm. (i) 150 mm dia.

126 Providing and Supplying ISI CI D/F Sluice Valve as per IS:14846 (Latest Edition) of

Following class and diameter including all taxes, insurance, transportation, fright

charges, octroi, inspection charges, loading, unloading, conveyance to 2.00 Nos. 20587.84

departmental stores, stacking etc. complete. PN-1with hand wheel / cap operated

(PD type Short Body) (9) 300 mm Dia. Sluice Valve

127 Providing and Supplying ISI CI D/F Sluice Valve as per IS:14846 (Latest Edition) of

Following class and diameter including all taxes, insurance, transportation, fright

charges, octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc. complete. PN-1with hand wheel / cap operated

(PD type Short Body) (7) 200 mm Dia. Sluice Valve

128 Providing and Supplying ISI CI D/F Sluice Valve as per IS:14846 (Latest Edition) of

Following class and diameter including all taxes, insurance, transportation, fright

charges, octroi, inspection charges, loading, unloading, conveyance to 3.00 Nos. 5906.48

departmental stores, stacking etc. complete. PN-1with hand wheel / cap operated

(PD type Short Body) (6) 150 mm Dia. Sluice Valve

129 Providing and Supplying ISI C.I. Air Valves of approved make & quality of Following

class and diameter including all taxes, insurance, transportation, fright charges,

octrol, inspection charges, loading, unloading, conveyance to departmental stores, 5.00 Nos. 12507.84

stacking etc. complete. Air Valves Double acting (DS2)

130 Lowring, Laying and jointing R.C.C. Pipe in C.M. 1:1 1/2 of following diameters in

proper position, grade and alignment at all level as directed by engineer in charge

including conveyance from stores to site of work, labour, giving hydrulic testing as 110.00 Rmt 120.19

per IS Code. Class NP3 (6) 300 mm Dia. Pipe

131 Lowring, Laying and jointing R.C.C. Pipe in C.M. 1:1 1/2 of following diameters in

proper position, grade and alignment at all level as directed by engineer in charge

including conveyance from stores to site of work, labour, giving hydrulic testing as 150.00 Rmt 88.88

per IS Code. (4) 200 mm Dia. Pipe

132 Lowring, Laying and jointing R.C.C. Pipe in C.M. 1:1 1/2 of following diameters in

proper position, grade and alignment at all level as directed by engineer in charge

including conveyance from stores to site of work, labour, giving hydrulic testing as 40.00 Rmt 88.88

per IS Code. (4) 150 mm Dia. Pipe

133 Drilling of 200 / 215 mm dia. bore well in over burden rocky or loose collapsible /

boulder strata & lowering of 175 / 200 mm dia. UPVC / PVC / ERW casing pipe

above 12 meters and up to 40 meters depth by DTH rig etc.complete 1200.00 Rmt 414.10

134 Supplying slotted PVC pipes of approved quality at site of work confirming to IS.

135 Supplying PVC plain pipes of approved quality at site of work confirming to IS.

136 Providing and jointing flat flexible coppered calble PVC insulated enamelled

aproved make three core 2.50mm. 400.00 Rmt. 117.16

137 Supplying submersible pump set suitable for bore of 150 mm dia or more having

phase motor capacity not less than 10 HP with [A] 10 stage 575 to 480 LPM

discharge at 60 to 70 mtr head for 65 mm dia delivery pipe Supplying and

erecting push button operated fully automatic Star-Delta starter with 3 Nos.of

32A. rating contactors and. 1 No. of directly operated thermal overload relay 8.00 Nos. 54277.40

having 20-32A range in sheet steel enclosure for 3 phase 415V. 50 c/s. A.C. motors

up to 35 H.P. (A)P.W.Blockwith necessary connection complete erected onas

directed. Cat-II

138 Providing and fixing to wall ceiling and floor HDP pipes tubes (medium grade) of

the 50mm nominal bore, tube, fittings and clamps include. Making good the wall

ceiling and floor.(F) 50mm dia.

139 Providing and fixing to concealed wall ceiling and floor galvanized mild floor tubes

(medium grade) of the 50mm nominal bore, tube, fittings and clamps incldg.

Making good the wall ceiling and floor (F) 40mm dia..

140 Providing and fixing to concealed wall ceiling and floor galvanized mild floor tubes

(medium grade) of the 25mm nominal bore, tube, fittings and clamps incldg.

Making good the wall ceiling and floor.(C) 25mm dia.

141 Earthwork in cutting including preparing the slope and camber andstacking or

utilising the cutting stuff in bank as directed upto 200 Meters from the end of

cutting with all lead and lift.(i) Hard murrum.+ Add extra over item 9 for conveying 214.00 Cum 450.77

and utilising the stuff in bank from end of cutting with all required lead and lift.(C)

Above 400 Meters upto 500 Meters

142 Box cutting the road surface to proper slope and camber for making a base for

road work including removing the excavated stuff with desposing on the road side 3256.00 Cum 112.02

slope as directed up to 50 mt. Lead

143 BT Metal 25 to 40 MM & Aggregate 13.2 and down chips & SD including

conveyence + Spreading the stone aggregate for rolling and W.B.M. including

filling the interstices to required camber and gradient (excluding spreading of

Blindage)(iii) 25mm to 50mm size crushed stone

144 Providing and laying foundation cement concrete 1:3:6 ( 1 cement :3 coarse sand :

6 aggregate 20mm nominal size ) graded concrete and curing complete 652.00 Cum 3925.48

145 Providing and and laying controlled cement concrete M250 and curing etc. comp.

including the cost of form work and reinforcement for R.C.C. work for internal 1303.00 Cum 4185.96

146 Compaction and finishing of cement concrete road by tremix process, providing

extra labour charge for tremix ( Vaccum dewatering service ) process on cement

concrete road surface by using vaccum dewatering pump floater surface vibrator

including making groove 5mm width and filling with polyvynile polymer and rough 6662.00 Sqm. 81.81

finish to surface as per instruction including leveling etc. complete.

147 Supplying and fixing reinforced concrete heavy duty non-pressure pipes with

collars for culverts including setting and joining the pipes in C.M. 1:2 watering and

laying (To level of slops of I.S. 458 / 1971 Class NP3 casted by vertically vibrated 150.00 Rmt 1095.18

technology of following internal diameter. (i) 300 mm dia.

148 Providing and fixing pre-cast concrete kerb stone of gray cement based concrete

block 30cm length,30cm height and 15cm thick of M200 grade concret as per

approved design and including excavation for fixing in proper line and level,filling 1310.00 Rmt 413.84

the joint with C:M 1:3 (1cement:3fine sand) etc complete.

149 Clearing and grubbing road land including uprooting rank vegetation grass

bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees cut

earlier and disposal of unserviceable materials (C) By mechanical means in area of 1.00 Ha 28455.09

150 Earthwork in cuting in all sorts of soil and soft murrum including conveying and

spreading the stuff, embankment as and where directed within 200meters from 3000.00 Cmt 137.33

the end of the cutting with all required lead and lift.

151 Providing and casting in situ ordinary cement concrete M- 150 for coping, over

riding returns including formwork curing and finishing complete.

152 Providing & fixing M.S. grills of required pattern in gaps of openings including

frame work etc. with one coat of red lead paint & two coats of oil paint etc. 700.00 Kg 112.95

153 Providing and fixing concertina coil fencing with punched tape concertina coil

mm dia 10 mt openable length having 50 no rounds per 6 mt length, upto 3mt

height of wall with existing angle iron (50mm x50mm x5mm )requird shaped As

per Directed Engeenier in charge. placed 2.4mt or 3.00mt apart and with

horizontal R.B.T. reinforced barbed wire(3 mm) , stud tied with G.I. staples and G.I. 1000.00 Rmt 342.39

clips to retain horizontal, including necessary bolts or G.I.barbed wire tied to angle

iron, all complete as per direction of Engineer-in-charge, with reinforced barbed

tape (R.B.T.)/Spring core (2.5 mm thick) and weight 43.478 gm/meter at

compound wall for ESR M4/ intakewell.

154 Constructing cattle trap made from ISMC 100 border and G.I. Pipe 50mm dia

HEAVY DUTY at 12 cm spacing by welding and necessary support of I.S.M.B. 100 x

75 x 6 section fixing in prepard chamber as per drawing by necessary arrangement 12.00 Sqmt 4920.72

155 Plantation of trees in soil including digging 45 x 45 x 45cm size pits, preparing soil,

providing and mixing organic fertiliser, watering, planting and filling the pits as per

direction including etc. comlete

156 Providing tree plants having minimum 1.00 mt height and healthy growth various

kinds as like Peltoform, Gulmahor, kananj, Amla, Raintree, Saptaparni, Cherry

Cryjeliya, Borsalli, Kadam, Buch, Champo, Asopalav and as suggested etc. 300.00 No. 25.25

complete. & Maintinence of 3 month After Providing Tree Plant.

157 Providing and fixing TREE GUARD 2.00 mt. long & of 600mm dia. square mesh of 2”

x 2” and M.S. Flat of 25mm x 5 mm vertical support and three rings of 20 x 3 mm

flat, fixing on site in CC 1:4:8 and including oil painting two coats with red lead 300.00 No. 939.30

158 Providing and fixing H.D.P.E. water tank with necessary G.I. fitting over flow pipe,

boll valve, clamp, nipple etc. including placing on 90 raised platform as directed.

159 Providing and erecting open well type horizontal monoblock pumpset with C.I.

body having following specification (I) 1 H.P. single phase open well motor

pumpset suitable for 145 lit/min (ii) Suitable for 32 dia. delivery pipe with control 1.00 No. 8080.00

panel & 10 mtr long 3 x 1.5mm 2 submersible flat copper cable. (Cat-II type)

160 Providing and fixing Drip irrigation System of approved brand for plantation

including fixing with water supply line for plantation as per drawing and 2.00 No. 1565.50

requirement. (a) Screen filter 7000 Ltr per day

161 Providing and fixing Drip irrigation System of approved brand for plantation

including fixing with water supply line for plantation as per drawing and 2.00 No. 373.70

requirement. (b) Pressure Gauge 1" dia (0-7 Kg/Cm/2)

162 Providing and fixing Drip irrigation System of approved brand for plantation

including fixing with water supply line for plantation as per drawing and 2.00 No. 2020.00

requirement. (c) By Pass assembly gun metal

163 Providing and fixing Drip irrigation System of approved brand for plantation

including fixing with water supply line for plantation as per drawing and 2.00 No. 323.20

requirement. (d) 32 mm dia. Control Valve Gun metal

164 Providing and fixing Drip irrigation System of approved brand for plantation

including fixing with water supply line for plantation as per drawing and

requirement. (e) 16 mm lateral HDPE pipe 2.5 Kg including fitting and micro Tibe / 3500.00 No. 10.10

165 Providing and fixing Drip irrigation System of approved brand for plantation

including fixing with water supply line for plantation as per drawing and 400.00 No. 2.12

requirement. (f) 1.2mm Micro tube

166 Providing and fixing Drip irrigation System of approved brand for plantation

including fixing with water supply line for plantation as per drawing and 400.00 No. 2.12

requirement. (g) Dripper 4 LPH / 8 LPH

167 Providing and laying in trenches 6.0 kgF/cm2 working pressure PVC pipes for water

supply line of the following outside dia. having white colour complete with 720.00 Rmt. 68.68

necessary fitting clamps etc. (B) 50 mm dia.

168 Providing and laying in trenches 6.0 kgF/cm2 working pressure PVC pipes for water

supply line of the following outside dia. having white colour complete with 430.00 Rmt. 44.44

necessary fitting clamps etc. (A) 32 mm dia.

169 Grassing with selection No. 1 doob grass including watering and maintenance of

the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and

fit for mowing including supplying good earth, if needed (the grass and good earth 1000.00 Sqmt 90.90

shall be paid for separately).

170 Supplying, installation, testing and commissioning of electric driven Main Fire

Pump suitable for automatic operation and consisting of following, complete in all

respects, as required : (a) Horizontal type, multistage, centrifugal, split casing

pump of cast iron body & bronze impeller with stainless steel shaft, mechanical

seal conforming to IS 1520. (b) Suitable HP Squirrel cage induction motor, TEFC,

synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz,

AC supply with IP 55 protection for enclosure, horizontal foot mounted type with 3.00 Nos 326834.02

Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated Common base plate,

coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement

concrete foundation duly plastered with anti vibration pads.

1.1 2280 lpm at 70 m Head

171 Supplying, installation, testing and commissioning of electric driven pressurisation

pump suitable for automatic operation and consisting of following, complete in all

respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal

pump of cast iron body and bronze impeller with stainless steel shaft, mechanical

seal conforming to IS : 1520. Suitable HP squirell cage induction motor TEFC type

suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of

protection for enclosure, horizontal foot mounted type with Class-'F' insulation, 3.00 Nos 112599.53

conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling

guard, foundation bolts etc. as required.

Suitable cement concrete foundation duly plastered and with anti vibration pads.

3.1 180 lpm at 88 m Head

172 Supplying, installation, testing and commissioning of diesel engine driven main fire

pump suitable for automatic operation and consisting of following, complete in all

respects, as required : (Diesel Driven Pump) Horizontal type, multistage,

centrifugal pump of cast of iron body and bronze impeller with stainless steel

shaft, mechanical seal conforming to IS 1520. Suitable HP, 1500 RPM water cooled

with radiator, diesel engine conforming to relevant IS standard complete with auto

starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust

pipe extended upto 10 m outside pump house duly insulated with 50 mm thick

glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, 2.00 Nos 549714.14

instruments and protection as per standard specification, stop solenoid for auto

stop in the event of fault with audio indications, painted with post office red

colour etc. as required. M.S fabricated, common base plate, coupling, coupling

guard, foundation bolts etc. as required. Suitable cement concrete foundation duly

plastered and with anti vibration pads.

2.7 2280 lpm at 70 m Head

173 Fabrication, supply, Insallation testing & commissioning of Electrical control panel

of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA

sheet, compartmentalised with hinged lockable doors, dust and vermin proof,

powder coated of approved shade after 7 tank treatment process, cable alley,

interconnection with suitable size copper conductor cable/solid copper strip,

having switchgears and accessories, mountings and internal wiring, earth

terminals, numbering etc. complete in all respect, suitable for main fire pump,

pressurisation pump & diesel pump set complete as per CPWD specification with

following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz

Ac Supply with enclosure protection class IP 42 as required : 5.1 INCOMING - 400A,

50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector

switch Digital Ammeter (0-400 A) with selector swtich & CTs etc. LED type RYB

phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 300A 3.00 Nos 254917.89

OUTGOING ( Note : All outgoing feeders for pumps should have digital Ammeter

with selector switches, and LED type ON, OFF, trip indicating lamps)

125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter

suitable for 60 HP pump with overload protection, current sensing type single

phase preventor complete with all acceessories and internal wiring required for

automatic operation, selector switch for local/remote, auto/manual/OFF

operation. Jockey Pump

63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta

starter with overload protection, current sensing type single phase preventor

complete with all acceessories and internal wiring required for automatic

operation, selector switch for local/remote, auto/manual/OFF operation.

174 Supply Of 12 V Battery, Coolant ,Engine Oil And Diesel Tank 2.00 SET 35350.00

175 Providing laying,testing & commissioning of 'C' class heavy duty MS Pipe

conforming to IS 1239/3589 i/c fittings like elbows, tees,flanges,tapers, nut bolts,

gaskets etc. in ground including welding,excavation & providing cement concrete

blocks as supports,anticorrosive treatment with coaltar/asphalt tape as per IS 264.00 Rmt 3340.27

10221,refilling the trench etc.of following sizes complete as required.150 mm dia

176 Providing laying,testing & commissioning of 'C' class heavy duty MS Pipe

conforming to IS 3589/IS 1239 including welding, fittings like elbows, tees, flanges,

tapers, nut bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable 500.00 Rmt 2262.88

clamp/support frame and painting with two or more coats of synthetic enamel

paint of required shade complete as required:100 mm dia

177 Providing laying,testing & commissioning of 'C' class heavy duty MS Pipe

conforming to IS 3589/IS 1239 including welding, fittings like elbows, tees, flanges,

tapers, nut bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable 390.00 Rmt 1668.91

clamp/support frame and painting with two or more coats of synthetic enamel

paint of required shade complete as required:80 mm dia

178 Providing laying,testing & commissioning of 'C' class heavy duty MS Pipe

conforming to IS 3589/IS 1239 including welding, fittings like elbows, tees, flanges,

tapers, nut bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable 260.00 Rmt 1134.42

clamp/support frame and painting with two or more coats of synthetic enamel

paint of required shade complete as required:50 mm dia

179 Providing laying,testing & commissioning of 'C' class heavy duty MS Pipe

conforming to IS 3589/IS 1239 including welding, fittings like elbows, tees, flanges,

tapers, nut bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable 180.00 Rmt 915.29

clamp/support frame and painting with two or more coats of synthetic enamel

paint of required shade complete as required:40 mm dia.

180 Providing laying,testing & commissioning of 'C' class heavy duty MS Pipe

conforming to IS 3589/IS 1239 including welding, fittings like elbows, tees, flanges,

tapers, nut bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable 860.00 Rmt 658.43

clamp/support frame and painting with two or more coats of synthetic enamel

paint of required shade complete as required:25 mm dia.

181 Wrapping & Coating of Underground Pipe. with 4mm damar coat for Pipe Coating

etc.suitable for pipe size 405.00 Rmt 252.50

182 Supplying,fixing,testing & commissioning of double flanged sluice valve of rating

PN 1.6 with non rising spindle,bronze/gun metal seat,ISI marked complete with

nuts,bolts,washers,gaskets and conforming to IS 780 of following sizes as 8.00 Nos 20157.12

183 Supplying,fixing,testing & commissioning of double flanged sluice valve of rating

PN 1.6 with non rising spindle,bronze/gun metal seat,ISI marked complete with

nuts,bolts,washers,gaskets and conforming to IS 780 of following sizes as 4.00 Nos 12965.41

184 Supplying,fixing,testing & commissioning of double flanged sluice valve of rating

PN 1.6 with non rising spindle,bronze/gun metal seat,ISI marked complete with

nuts,bolts,washers,gaskets and conforming to IS 780 of following sizes as 3.00 Nos 9471.70

185 Supplying,fixing,testing & commissioning of butterfly valve of PN 1.6 rating with

bonze/gunmetal seat duly ISI marked complete with nuts,bolts,washers,gasket

conforming to IS 13095 of following sizes as required:150 mm dia. 15.00 nos 7934.90

186 Supplying,fixing,testing & commissioning of butterfly valve of PN 1.6 rating with

bonze/gunmetal seat duly ISI marked complete with nuts,bolts,washers,gasket

conforming to IS 13095 of following sizes as required:100 mm dia.

187 Supplying,fixing,testing & commissioning of butterfly valve of PN 1.6 rating with

bonze/gunmetal seat duly ISI marked complete with nuts,bolts,washers,gasket

conforming to IS 13095 of following sizes as required:80 mm dia.

188 Supplying,fixing,testing & commissioning of butterfly valve of PN 1.6 rating with

bonze/gunmetal seat duly ISI marked complete with nuts,bolts,washers,gasket

conforming to IS 13095 of following sizes as required:50 mm dia. 10.00 nos 3350.60

189 Providing,installation,testing and commissioning of non return valve of following

sizes conforming to IS:5312 complete with rubber gasket,Gi bolts,nuts,washers 9.00 nos 15750.74

etc.as required:150 mm dia.

190 Providing,installation,testing and commissioning of non return valve of following

sizes conforming to IS:5312 complete with rubber gasket,Gi bolts,nuts,washers 4.00 nos 9785.64

etc.as required:100 mm dia.

191 Providing,installation,testing and commissioning of non return valve of following

sizes conforming to IS:5312 complete with rubber gasket,Gi bolts,nuts,washers 10.00 nos 5127.87

etc.as required:50 mm dia.

192 Supply, Installation, Testing and Commissioning of Gun Metal Air Release

Valve with necessary fittings. Size: 25 mm 9.00 Nos 2373.50

193 Supply, Installation, Testing and Commissioning of 100 mm dia Pressure Gauge

(for all pipes) of range 0 - 15 Kg / cm² conforming to IS - 3624 having bourdon tube

of stainless steel 310 in cast aluminium, stove enameled, black, weather

proof case with outer, screwed aluminium bezel and complete with necessary 9.00 Nos 2777.50

U-type stainless steel siphon tube and cock including providing suitably painted

angle iron support to the tube etc.as per required.

194 Providing & fixing of pressure switch in M.S pipe line including connection etc. As

required. 6.00 nos 3383.50

195 Providing, fixing, testing & commissioning of 50sqmm 3.5 Core Alluminium

Armoured Cable of required size from Main 3 phase connection to Fire Pump 1180.00 Rmt 398.95

House with 100 Amp MCCB with Cover as required:

196 Providing,installation,testing and commissioning of Y satrainer fabricated out of

1.6 mm thick stainless steel,grade 304,sheet with 3 mm dia holes with stainless 9.00 Nos 15150.00

steel flange.150mm

197 Supplying and fixing single headed internal hydrant valve with instantaneous

Stainless Steel coupling of 63mm dia with cast iron wheel ISI marked conforming

to IS 5290 (type-A)with blank cap and chain required:

198 Supplying and fixing Double headed external hydrant valve with instantaneous

Stainless Steel coupling of 63mm dia with cast iron wheel ISI marked conforming

to IS 5290 (type-A)with blank cap and chain required:

199 Supplying & fixing 63mm dia gun metal short branch pipe with 20mm nominal

internal diameter size nozzle conforming to IS 903 suitable for instantaneous

connection to interconnect hose pipe coupling required:Gun metal

200 Supplying and fixing 63mm dia,15 m long RRL hose pipe with 63mm dia male and

female couplings duly bound with GI wire,rivets etc. conforming to IS 636 (type-A)

as required:Gunmetal

201 Supply, Installation, Testing and Commissioning of Weather proof Standard

Fire Hose Cabinet wall mounting type (750 mm x 600 mm x 250 mm deep) having

single or double opening with necessary locking arrangement by allan key suitable 40.00 Nos 3535.00

for housing 2 nos. hose pipe, 1no. Branch pipe & nozzle spanner.

202 Supplying and Fixing of fire brigade connection of cast iron body with gun metal

male instataneous inlet couplings complete with cap and chain as reqd. for

suitable dia MS pipe connection conforming to IS 904 as required:4 way 150mm 4.00 set 12375.46

203 Supplying and Fixing of fire brigade connection of cast iron body with gun metal

male instataneous inlet couplings complete with cap and chain as reqd. for

suitable dia MS pipe connection conforming to IS 904 as required:2 way 100mm 4.00 set 5970.25

204 Supply, and fixing First Aid Hose Reel with MS construction spray painted with

P.O red,conforming to IS 884 complete with the following as required.

20mm nominal internal dia water hose thermoplastic(textile reinforced) type-2 as

per IS 12585 20mm nominal internal dia 40.00 Nos 7682.68

gun metal globe valve and nozzle. drum and brackets for fixing the equipment on

the wall.Connection from riser with 25mm dia stop gun metal valve & MS pipe and

205 SITC of Intelligent Analog Addressable Type Manual Call Point having Surface or

Option fully complaint to EN54 having Rotary Decade Switches for Addressing from

01-99 complete with Back Box for Mounting Complete as required conforming to 15.00 Nos 9595.00

BS5839 Standards and Duly Approved by EN54/LPCB

Make: BOSCH/HONEYWELL/SYSTEM SENSOR/ASES

206 SITC of Addressable Type Loop Powered Hooter Cum Strobe with 32 tone

selection, volume setting

features, IP24 housing, Wide operating voltage range, complete with Mounting

Base with required mounting accessories as required conforming to BS5839 15.00 Nos 12685.60

Standards and Duly Approved by EN54/LPCB

Make: BOSCH/HONEYWELL/SYSTEM SENSOR/ASES

207 SITC of Intelligent Analog Addressable Type Photoelectric Type Above Ceiling

Smoke Detector Complete with Respond Indicator Dual LED, Hard Addressable

Having rotary decade Address switches from 01-99, complete with Mounting Base

and required mounting accessories Complete as required Conforming to BS

Standards and Duly Approved by EN54/LPCB

Make: BOSCH/HONEYWELL/SYSTEM SENSOR/ASES

208 SITC of 2 Loop Micro processor based 2 wire fault tolerant loop, (each loop

accessing 99 detectors and 99 modules) Networkable Fire Alarm / Detection

Control Panel. The panel shall be able to give location of all fire/fault conditions of

addressable units via the address codes. Further, the panel must be able to

automatically switch ON /OFF respective control module when ever any alarm is

triggered. The panel shall have rectifier, Loop cards, 4x40 – Character LCD

alphanumeric display with back-light to indicate Fire/Fault Signal with address and

analog output, external/inbuilt printer to log all fire or fault events complete in all

respects. The panel should be networkable for up to 99 panels. The Panel Shall be

Sheet Steel Painted, sealed to IP30. The Panel Shall have 20 Zones with Individual

LED Indicators, expandable to 200 LED Indicators. The Panel Shall have 3 Serial 1.00 Nos 257550.00

Ports. The panel shall have provision to integrate with PA System and shall have

provision to connect to Building Management system through Modbus Card. The

panel shall have a 4 programmable sounder outputs, and open / short circuit

monitoring. The panel shall have a built in power supply and battery charger,

which should be capable to charge maintenance free 24 AH, 2 x 12 volt SMF Lead

acid batteries capable of running for a minimum of 24 hours with battery charger

complete as required. and conforming to BS5839 Standards and Duly Approved by

EN54/LPCB as per specifications.

Make: BOSCH/HONEYWELL/SYSTEM SENSOR/ASES

209 Supplying and laying of 2x1.5 sqmm fire alarm armoured cable,600/1000V rated

with annealed copper conductor having XLPE insulation,steel wire armouring 3800.00 Rmt 152.89

&FRLS outer sheath complete as required.

210 FIRE DETECTION SYSTEMS ,Supply, installation, testing and commissioning of

Below False Ceilling Addressable ideal optical smoke detector for detecting visible

smoke particles with Mounting Base Item as per drawing and specifications, as 10.00 Nos 3832.95

approved by electrical engineer incharg

211 Providing,fixing,testing & commissioning of 15mm dia quartzoid bulb type

sprinklers of rating 68 degree centigrade with required accessories:Pendent 240.00 Nos 462.22

212 Providing,fixing,testing & commissioning of 15mm dia quartzoid bulb type

sprinklers of rating 68 degree centigrade with required accessories:Horizontal side 10.00 Nos 546.68

213 Providing,fixing,testing & commissioning of 15mm dia quartzoid bulb type

sprinklers of rating 68 degree centigrade with required accessories:Concealed 2.00 Nos 1270.50

214 Providing, fixing photo luminescent Signage's as per IS standard in Block / Small

Letters on rigid sheet with necessary wall or Ceiling fittings as Specified Sizes:

For Fire Extinguisher,exit,do not to do,etc. 10500.00 Sq.inch 9.09

215 Supply, installation, testing and commissioning of ABC type 6 kg confirm to

IS:15683, with ISI marked / TAC approved fitted with required accessories 42.00 Nos 2626.00

including wall suspension brackets.

216 FIRE EXTINGUISHER

Supply, installation, testing and commissioning of Carbon Dioxide (CO2) type Fire

Extinguisher of 4.5 kg confirm to IS:15683, with ISI marked / TAC approved fitted 42.00 Nos 9595.00

with required accessories including wall suspension brackets.

217 Supply, installation, testing and commissioning of Modular ABC type 5 kg

confirm to IS:15683, with ISI marked / TAC approved fitted with required 7.00 Nos 2525.00

accessories including wall suspension brackets.

218 Supply, installation, testing and commissioning of K type KITCHEN FIRE

EXTINGUISHER 6 kg confirm to IS:15683, with ISI marked / TAC approved 2.00 Nos 22220.00

fitted with required accessories including wall suspension brackets.

219 Supply, installation, testing and commissioning of Stainless steel Ball Valve. a)

25mm dia 52.00 Nos 1212.00

220 Providing Core Cutting for beam & Slab up to 25 mm to 100 mm dia directed by

engineer in-charge.

221 Supplying, Installing, Testing & Commissioning of M.S. structural steel support.

222 Suppy, Installing, Testing and Commissioning of C.I. Heavy duty foot valve with

flangs, Nut bolts, Gaskets etc. with necessary complete accessories.150mm 6.00 Nos 16665.00

223 Suppy, Installing, Testing and Commissioning of C.I. Heavy duty foot valve with

flangs, Nut bolts, Gaskets etc. with necessary complete accessories.100mm 3.00 Nos 12625.00

224 Fire Resistant Door Double Leaf Hinge Type (2 Hour Fire Rated) 1.00 mm thick GI

Sheet cladded 40mm thick shutter complete with GI frame (Single Ribet – Frame

Profile 100 x 57mm) made from 1.20mm thick GI Sheet & Fixing arrangements AS

PER BS 476 PART- 20 & 22 & IS: 3614 Part - II for Integrity, Stability.Door Size:

2000mm (W) x 2100mm (H) Including below Accessories S.S. Ball Bearing Hinges- 6 1.00 Rmt 79285.00

Nos Vision Panel with Fire Glass of Size: 200 x 300mm - 2 Nos Heavy Duty Door

Closer - 2 Nos Heavy Duty Door Closer - 2 Nos Panic Exit Device for Double Leaf

Door - 1 No. External Trim Bar (Panic Latch) - 1 No.

225 3 Layer PVC Storage Tank 15000 ltr. Installation With all accessories like

M.T,L.T,Band,Clamp,Solution And Plumbing charges including as per MR 2.00 Nos 166650.00

226 Fire Blanket 3.00 Nos 2222.00

227 Supplying FIRE bucket round bottom of 9 liters capacity made out of 24 gauge G.I

Sheet with extra handle at bottom duly painted white inside and Red out side with

FIRE mark. Filled with dry-sand and kept on existing stand provided or hung on 32.00 Nos 1025.15

228 Supplying and erecting floor mounting Stand for keeping four nos. of FIRE buckets

comprising 1500 mm in length, 900 mm height frame made out of 30mm x 30 mm

x 4 mm angle iron with cross supports legs, welded with 4 hooks and duly painted 8.00 Nos 5807.50

with one coat of primer and two coats of approved enamel P O red paint.

229 Submitting the application to obtain Fire Plan Approval and After Completion of

Work Obtain Final Fire NOC for 3 Year 3.00 Nos 104366.67

230 Supply, installation, testing & commissioning of Priming tank, HDPE type,

litres, with necessary piping 100 mm size, G.I pipe for priming the pumps, pipe of

with butterfly valves for isolation, Water Filling to priming tank by piping min. 50 3.00 Nos 53530.00

mm size, with all complete.

231 Pay Legal Fees to Concern Authority for Obtaining Plan Approval and Final NOC

232 Supply,Installation and commissioning of Manual Call Points,with complete

accessories. 8.00 Nos 1020.10

233 Supply,Installation and commissioning of Audio hooters,with complete

accessories. 8.00 Nos 1075.65

234 Supply,Installation and commissioning of smokedetectors/heat detectors, with

complete accessories.With Base

235 Supply,Installation and commissioning of Fire Alarm Panel Conventional type,

zone, with complete accessories 2.00 Nos 21608.95

236 Providing PPGL Sheets roofing fixed with galvanised iron J or L hooks,Bolt & nuts

8mm dia with bitumen and G.I. limpet washer filled with white lead complate 150.00 Sqmt 734.19

excluding the coat of purlinss,Rafters (1) 0.80 mm thick sheet.

237 Providing and filling in foundation with ordinary cement concrete M-100 mix and

providing necessary vertical pin headers including form work ,vibrating , ramming 23.00 Cumt 3211.27

and curing complete . (More than 10 ton)

238 Providing and filling in foundation with ordinary cement concrete M-200 mix and

providing necessary pin headers including shuttering, scaffolding, laying, vibrating

curing and finishing complete without V-Grooves. (A) Height from 0.00 to 5.00 mt. 438.00 Cumt 4157.37

(Up To than 10 ton)

239 Providing and placing in position FE 500D bar reinforcement for following items

including cutting bending hooking and tying complete as per detailed drawing for 12.56 MT 73858.69

the following (A) Piers (B) Abutments (C) R.C.C. Returns

240 Providing and fixing FRP frame size 100x50 mm and 28mm thick FRP depress panel

shutter having extra reinforcement on sides & edges in Gel coat finish. The core of

the shutter & frame is to be filed up with injected fire retardant grade

polyurethene foam done in situ alongwith embedded wooden pieces for stiffening

& also taking hinges & fintures. The whole FRP frame & shutter is to be water

proof weather proof, termite proof & resistance to mild acid/alkali. Rates are to be

inclusive of S.S hinges with necessary screws & alluminium fixtures & fastenings &

fastener sleeve.

241 Providing and fixing 38mm Thick door Single shutter solid core finished having

factory fabricated std. Extruded aluminium colour anodized hollow section Jindal

19552 weight not less than 1.1 kG/MT {Section 63.50 x 38 mm x 2.50 mm thick }

for door frame, hollow portion of door frame shall be filled with wood to be insert

for durable grip of door hinges, with factory made 38 mm.thick flush door both

side 1 mm thick pre laminated with 6 Lever Mortice lock {Godrej or Equivalent), SS 5.00 Sq.M 2755.28

Aldrop 30cm long, SS Handle size 30 Cm Long, Tower Bolt size 20 cm & Floor spring

heavy duty etc. as per detail colour & pattern apporoved by this office including

necessary anodized alluminum fixtures and fastenings.

242 Providing and fixing standared extruded of alluminium section of size 63mm x

38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized alluminium frame for

ventilation with 3 mm thick Bajari glass as details etc complete for Ventilation 1.00 Sq.M 1089.97

243 Demolition including stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift. (i) R.C.C. work 2827.00 Cu.M 1108.12

244 Demolition of Brick work and stone masonry including stacking of serviceable

material and disposal of unserviceable materials with all lead and lift. (ii) In

245 Dismentling doors, windows, ventilators etc. (wood or steel) shutters including

chowkhats architraves, holdfasts and other attachment etc. complete and stacking

them within all lead and lift.(i) Not exceeding 3 Sq.M. in area. 85.00 Each 196.66

246 Dismantling sanittary fittings like wash basin . W.C. pan Indian and European type,

flushing tank etc. including stacking the materials with all lead and lift. 98.00 Each 196.66

247 Providing and laying rubbles for Apron (Each stone weighing not less than 40kg)

including and packing and filling in the interstices with quarry spall. 24.00 Cumt 1092.52

248 providing and filling in foundation with ordinary cement concrete M-150 mix and

providing necessary vertical pinheaders including form work ,vibrating , ramming 46.00 Cumt 3581.32

and curing complete .

249 Providing and casting in situ controlled Cumcement concrete M - 300 for R.C.C. raft

and cut-off walls including necessary shuttering , laying , vibrating,ramming and 14.00 Cumt 4648.34

curing complete.

250 Providing and casting in situ controlled cement concrete M - 300 for R.C.C.return

as per drawing including centering, shuttering, scaffolding where necessary laying,

vibrating, curing and finishing complete (A) Height from 0.00 to 5.0 Mt (1) Piers (2) 76.00 Cumt 5256.42

Abutments (3) R.C.C. Return.

251 Providing and casting in situ controlled cement concrete M - 300 for R.C.C. solid

slab including centering, scaffolding curing and finishing complete. 42.00 Cumt 5402.47

252 Provision of an Reinforced cement concrete crash barrier at the edges of the road,

approaches to bridge structures and medians, constructed with M-40 grade

concrete with Fe-500D reinforcement with epoxy coating conforming to IRC:21

and dowel bars 25 mm dia, 450 mm long at expansion joints filled with pre-

moulded asphalt filler board, keyed to the structure on which it is built and 36.00 Cumt 9995.97

installed as per design given in the enclosure to MOST circular No. RW/NH -

33022/1/94-DO III dated 24 June 1994 as per dimensions in the approved drawing

and at locations directed by the Engineer, all as specified as per drawing attached.

253 Providing and laying filter media 600mm thick as directed at the back of abutment

return & wing wall as per detailed specification 86.00 Sqm 1268.86

254 Providing and laying weep holes in abutments, and returns by using A.C. Pipe of

100mm including laying in proper grade and jointing the complete as per detailed 86.00 Nos 88.76

255 Providing Pre-moulded asphalt filler joints as per drawings.(A) 12mm 8.00 Sqmt 703.53

256 Applying two coats of Birla or Asian (or equivalent) acrylic lapy ( putty) & one

coats of primer of approved brand and manufacture on new wall surface to give

an even shade including thoroughly brushing the surface free from mortar 6880.00 Sq.M 30.44

dropping and other foreign matter and sand papered smooth.

257 Providing and fixing 60 x30 CM Machine cut, mirror polished Blue Kotah stone slab

flooring 25 mm thick laid on 20 mm thick cement mortar 1:6 ( 1 cement:6 coarse

sand) jointed with matching pigment & cement slurry including rubbing and 43.00 Sq.M 1189.78

polishing finishing etc. complete.

258 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length , in below type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered with 1129.00 Pt. 485.81

textured/metallic/white front plate modules erected on / in wall / ceiling as per

pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as

directed. (f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete. Cat-III

Point wiring for Light Point in Bath & W/C .Cat-III 34.00 Pt. 242.91

259 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are

of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to

mtr length, in below type of pipe erected with 6A Modular type switch and hum

free EME step type electronic fan regulator mounted and accessories with earth

continuity of following type erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic/white front plate modules 359.00 Pt. 674.68

erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Ca-III

260 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of

ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with Modular type switch & 5 pin

Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected with following type of 180.00 Pt. 510.05

accessories. [I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board (f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Ca-III

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db

board. (f) with medium class Rigid PVC pipe and accessories erected concealed in 111.00 Pt. 745.38

wall/ceiling complete Ca-III

261 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket

erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate modules erected on / in wall / ceiling with 286.00 Pt. 257.55

following type accessories. Ca-III

262 Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires erected in below type of pipe with 6A Modular type switches

and following type of accessories erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front plate modules 2.00 Pt. 603.98

erected on / in wall / ceiling as per pipe erected. with necessary batten/angle

holder or ceiling rose or H.D.Connector as directed.(f) with medium class Rigid PVC

pipe and accessories erected concealed in wall/ceiling complete. Cat-III

263 Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as per 17.00 Nos. 160.59

site situation directed by Engineer In charge(4) TV Co-axial Socket outlet .Cat-III

(8) Computer RJ-45 socket Ca-III 9.00 Nos. 160.59

(9) 16 Amp. SP one way switch.Cat-III 6.00 Nos. 180.79

(10) 6/16Amp. Universal socket Ca-III 45.00 Nos. 199.98

(14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular MCB Switch Ca-III

264 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling erected with necessary PVC fittings &

Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, 1330.00 Mtr. 33.33

in approved manner as directed.(b) 25 mm

265 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected concealed

in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size. (a) with

medium class Rigid PVC pipe and accessories(b) 2 wire 2.5 sq. mm

266 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected in / on wall

/ ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of 675.00 Mtr. 112.11

green colour for earth continuity of following size (a) with medium class Rigid PVC

pipe and accessories (a) 2 wire 4 sq. mm

(h) 4 wire 6 sq. mm 475.00 Mtr. 260.58

267 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant PVC insulated conforms

to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control wiring) with required 75.00 Mtr. 56.56

size of copper lugs, nuts and bolts if required.(e) One wire 6.00 sq. mm

(h) One wire 25.00 sq. mm 36.00 Mtr. 236.34

268 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade

ISI marked copper wires of following size to be erected as directed.(c) 1.00 Sq.mm 810.00 Mtr. 22.22

2 core round/ flat PVC sheathed

(e) 1.50 Sq.mm 3 core round PVC sheathed 126.00 Mtr. 46.46

(k) 4.00Sq.mm 4 core round PVC sheathed 20.00 Mtr. 176.75

269 Providing & Erecting approved make following size of TV Co-axial flexible cable

comprising inner conductor of solid bare copper insulated with Foam PE &

Secondary conductor made of poly - Aluminium film bonded Al. Braids @ suitable 425.00 Mtr. 39.39

coverage overall sheathed with black PVC insulation.(b) RG-6

270 Supplying & erecting approved make LAN cable of following size in existing pipe as

per direction. [C] CAT - 6 180.00 Mtr. 47.47

271 Providing & erecting Switch board for Computer or electric apparatus consisting

of following modular type accessories mounted with PVC / Metallic

concealed/open box with single mounting base frame covered with

textured/metallic /white front plate,modules erected with necessary connections 9.00 Nos. 1133.22

as directed. 1 no. 6A/16A universal plug-switch combined. 3 nos. 6A Switch, 3 nos.

6A 5 pin Plug [B] For Modular Type Accessories Ca-III

272 Decorative call bell Ting-tong box type 250 volts complete erected 17.00 Nos. 71.71

273 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder

coated and high U.V. & corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%,CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt ,LED driver efficiency > 85 % (fitting 25.00 Nos. 373.70

required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (A) Tube Light with integral driver. (iv) 22-24

Watts, Surge - 2KV,IP-20, conventional 4 feet Ca-III

(v) 36 Watts, Surge-2 KV, IP-20, conventional 4 feet Ca-III 840.00 Nos. 535.30

274 Supplying and erecting led lamps with following wattage capacity of 220 to

voltage, minimum 15000 burning hours life, 500 V in built,

surge,protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 217.00 Nos. 112.11

lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser suitable

LAMP holder. (ii) 8 watts Cat-III

275 Supplying and erecting LED street light / Flood light fittings with High power White

LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt 22.00 Nos. 5976.17

. LED driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE:

Below description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges shown.)(A)

Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC

line supply with over-voltage protection. (iii) Above 60 to 90 watts.Cat-III

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC

line supply with over-voltage protection. (vi) above 160 to 200 watts Ca-III 6.00 Nos. 9647.52

(vii) above 200 to 250 watts.Cat-III 10.00 Nos. 10818.11

(C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and spun

aluminum canopy fixed with opal polycarbonate, pipe arrangement for vertical

mounting driver and accessories wired upto terminal block.IP 65 (b) 40 W Ca-III

276 Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to

25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. 21.00 Nos. 6173.12

supply 50 c/s. with all internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III

277 Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA. at 415 V. having Normal current rating

200A.with variable Thermal & magnetic release suitable to work on A.C.supply

c/s. with all internal connections, spreader tinned copper & complete erected in

existing 16 G.M.S.housing.ICS=100% of ICU only.Cat III

278 Supplying & erecting approved make Four Pole 415V change over switch interior

for panel mounting with operating mechanism A.C.23 duty confirming to IS for 1.00 Nos. 12241.20

(D)200A .Cat-III

279 Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper

Busbars with four equal Nos. of electrolyte bus having current density not more

than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with

colour insulating tape for phase sequence of following current carrying capacity, 4.00 Rn.Mtr 1961.42

erected with necessary bus bar supports /insulators, main cable socket to each

bar, erected in existing cubical panel with necessary connections. (A) Suitable for

100 Amp. Capacity

(B) Suitable for 200 Amp. capacity 1.00 Rn.Mtr 3202.71

280 Providing and erecting Miniature circuit breaker single pole 0.5A to 2A system and

having breaking capacity 10 KA to be erected in existing box. confirming to IS 30.00 Nos. 270.68

8828/1996 with ISI Mark.Cat-III

281 Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in 478.00 Nos. 112.11

existing box. confirming to IS 8828/1996 with ISI Mark Ca-III

282 Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve)

having 10 KA breaking capacity & confirms to IS : 8828 in existing box having

following capacity.(A) 6 to 32 Amp.Cat-III

(B) 40 Amp. Ca-III 17.00 Nos. 295.93

283 Providing & erecting 240 V MCB double pole switch for motor & inductive load (C

Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box 10.00 Nos. 330.27

having following capacity.(B) 40 Amp.Cat-III

284 Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve)

having 10 KA breaking capacity & confirms to IS : 8828 in existing box having 2.00 Nos. 295.93

following capacity.(B) 40 Amp. Ca-III

285 Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having

10KA breaking capacity & confirms to IS :8828 in existing box having following 19.00 Nos. 578.73

capacity.(a) 6 to 32 Amp. Cat-III

(b) 40 Amp. Ca-III 32.00 Nos. 638.32

286 Plastic enclosure fitted with DIN rail suitable for incorporating Three /Four nos.

MCB 2.00 Nos. 108.07

287 Sheets steel powder coated enclosure suitable for incorporating One/Two nos.

288 Providing and erecting Sheet Steel powder coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms

to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of MCB to be used) suitable for 17.00 Nos. 1492.78

(A) single phase incoming and horizontal single phase outgoing (b) sheet steel

double door (IP-43) (iv)12 way

(B) three phase incoming and single phase horizontal type outgoing Per phase

isolation type (PPI) (b) sheet steel double door (ii)6 way 19.00 Nos. 2913.85

289 Providing and erecting Approved make RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for

operation on single phase 240 V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not incorporate any electronic component.

for following Max. rating erected as directed. (i) 25 Amps.DP.Cat-III

290 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 20.00 Kg 77.77

291 Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit complete with necessary 20.00 Nos. 368.65

8 SWG earth wire.

292 For using salt and charcoal / coke as required for pipe type earthing. 20.00 Nos. 171.70

293 Supplying & erecting earth pit of minimum bore dia.150mm size approved make

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of

corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover.(approved make OEM has to

submit test certificate) & having back filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 / meter testing as per IEC 62561-2017, Voltage drop:-

< 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to retain moisture for long time Necessary

test report must be submitted. (a) For Electrical Installation up to 440V in normal

soil Length of pipe - 1 Mtr Back filling compound - 1 Nos Bag of 15 Kg.

294 Providing & erecting weather proof, dust & vermin proof, floor mounted front

operated indoor type cubical panel board necessary IP-42 and above protection

as per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet

for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats channel including cutting, bending,

drilling, welding, riveting with internal partitions & cable alley as per requirements

& instruction of engineer-in-charge with erection of supplied switch gears,

BUSBARS, suitable size of inter connecting PVC copper wire / copper-aluminium

strips, rubber grommets, rib, bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts, foundation flange - bolts-base Plates, 9.70 Sq mtr 10468.65

sufficient nos. of hinged doors, handles with locking arrangement and rubber

gasket,heavy duty end terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be painted with epoxy powder

coating. (The rates excludes the cost of switchgears, bus bars, inter connecting

mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be

measured excluding base beams) The panel shall be supplied with following

approved manufacturers with following size. (A) locally fabricated panel board. (i)

with 350 mm depth

295 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables.(C) 3 1/2 core 50 Sq. mm ( 25 560.00 Mtr. 284.82

Sq.1/2 mm core)

(D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core) 17.00 Mtr. 378.75

296 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (b) 4 core 6 Sq. mm

(C) 4 core 10 Sq. mm 30.00 Mtr. 140.39

297 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables.(A) 4 core 16 Sq. mm

(B) 4 core 25 Sq. mm 66.00 Mtr. 190.89

298 Making trench in soft soil of suitable width of 90 cm deep for laying cable or

locating the fault all over the run and back filling the same and making the surface 520.00 Mtr. 55.55

as normal ground.

299 Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below ground

across the road crossing or on floor with necessary material in an approved 30.00 Mtr. 397.94

manner and making the ground as per original.(B) 400 mm dia

300 Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of

same material at required depth in existing trench for laying of cable. below 336.00 Mtr. 62.62

ground / road surface for enclosing cable (A) 50 mm Outer dia

(C)90 mm outer dia 220.00 Mtr. 95.95

301 Providing and, fixing heavy duty flange type brass cable gland with rubber ring for

PVC insulated armoured cable complete with out going tails, insulating tape etc for

following size of cables.(c) 2 to 4 core 6 Sq. mm

(C) 2 to 4 core 10 Sq. mm 2.00 Nos. 38.38

(D) 2 to 4 core 16 Sq. mm 4.00 Nos. 47.47

302 Providing and, fixing heavy duty flange type brass double compression type cable

gland with rubber ring for PVC insulated armoured cable complete with out going

tails, insulating tape etc for following size of cables. (B) 3 & 1/2 core 35/50 Sq. Mm 20.00 Nos. 75.75

303 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner.(A) 1.5/ 192.00 Nos. 6.06

304 Providing and fixing approved make Perforated C type cable tray. Made from

sheet steel. The cable tray should be single or double bended as per required and

as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS

2629/4759. with max 17.5% perforation with coupler plate / Fish plate and GI 40.00 Rmt. 622.16

hardware like nut - bolt and washers etc. erection with necessary support(

included) as per Specification and as per instruction of engineer in charge.(5)

X 50 X 2.0 mm Thick

305 Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with

double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep

complete having 3blades with aluminium blades with , canopy & 30 cm. down rod 359.00 Nos. 1948.29

erected with earthing.(Make shall be approved by Engineer in charge))

306 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down

rod erected duly painted for fan complete with proper insulation without leakage 359.00 Mtr. 108.07

307 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC

bars up to 50mm length each side and pierced through a 16 Gauge M.S. box /

Heavy Duty PVC box complete erected concealed in Ceiling with necessary 359.00 Nos. 108.07

308 Supplying & erecting approved make low noise decorative exhaust fan having

square frame ABS body with inbuilt lowers & square frame. 200mm with 1350 64.00 Nos. 1366.53

RPM Cat.II Ca-II

309 Providing recess in wall or window frame suitable for erection of Exhaust fan

complete with plastering and colour washing to match the colour of the wall or

window c0omplete with expanded metal in order to render the fitting in accessible

and the room water-proof.

310 Supplying and erecting approved make Octagonal pole made from HR sheet steel.

The pole should be made as per IS. and shall be coated with hot dip galvanizing as

per IS 2629/2633/4759, suitable suspend local wind speed with integral Junction

box consist of terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and arrangement

for cable termination to be erected With Suitable foundation (Included) as per

details given by manufacturer considering site requirement (D) 6 Mtr. Long 70 mm

Top X 135 mm bottom dia, 3 mm thickness with 200mmX200mmX12mm base

plate, 4-M20 Bolts and 600mm long with necessary G.I. J Bolts .Approx Pole

311 Supplying & erecting approved make SMC press moulded composite FRP. loop-

in, loop-out approx. 2mm thick box complete with Bakelite connector strip

5way(3P+N+E),DIN rail for mounting mob & hinged doors as per requirement

having locking arrangements with mounting clamp with nuts, bolts & washers 8.00 Nos. 476.72

suitable for erection on pole with cable clamps& earth bolt of following size of

box. (c)150mm x 125mm x 100mm [deep]

312 Supplying and erecting Street light pole bracket comprising main B Class GI pipe of

4.2 cm/require outside dia. complete with suitable B Class G.I. sleeve tubing of

approx. 45cms.length and suitable for 76.5mm/80mm/require size of pole top

having nuts and bolts for fixing the brackets and having spread of 0.5 mtr. Length

with 110 deg.with vertical plane and suitable welded stiffener reducer and nipple 14.00 Nos. 491.87

with check nut complete painted with one coat.of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with following nos of arms. [A] Single

Arm bracket 0.5 Mtr

[B] Double Arm Bracket 0.5 Mtr 4.00 Nos. 622.16

313 Supplying & erecting IP 55 grade following size section pillar fabricated from joint

less M.S. Sheet with angle iron legs made from jointless M.S. Angle with cable

clamps to be buried in ground to have appropriate erection to work uniform until

erected with cement concrete foundation and 45 cm high bricks work finishing

with plaster etc. hinged double door internally supported on both side, with

internal and outside looking arrangement with look and keys in duplicate 35 x 35 x

5 mm M.S. Angle of Two Nos. one is welded and other with nut and bolt for 1.00 Nos. 3595.60

erecting Bakelite sheet. Painting the Section Pillar inside and out side with three

tank powder coated paint. section pillar roof should be without joint with water

leakage proof & tested as per IP 55 test & followed by IS 2147 of 1962 (B) 75 X 60 X

45 cm section pillar fabricated from 16 Gauge MS Sheet with angle iron legs 45 cm

long made from 35 X 35 X 5 mm thick MS angle.

314 Supplying and erecting HYLAM sheet on existing angle iron frame.for following

thickness.(D) 8mm

315 Supplying and erecting nuwood 12 mm thick on existing angle iron frame. 1.00 Sq. Mtr 291.89

316 Supplying & erecting approved make IP 55 grade Company fabricated Timer Panel

of following capacity for switch On-Off street lights on time scheduling basis made

from 16G CRCA sheet duly epoxy power painted inside and outside with hinged

doors and locking arrangement consisting of suitable size of 4 Pole MCB and 4 pole 1.00 Nos. 13350.18

contactor (cat-III)with analog time switch, auto manual switch of same make and

suitable input and output Bakelite terminals and with door earthing approved by

Engineer in charge.(B) 40 Amp

317 Supplying, erecting, testing, commissioning approved make M.S. Polygonal High

Mast Pole having following general Specification.

(a) Polygonal Section fabricated from M.S. Plate confirms BSEN 10025 & Hot deep

galvanized minimum 65/86 micron (as per IS 2629 /1985) Lantern carriage with

ring and rubber lines for erection of luminaries of suitable site.

(b) Maximum telescopic section not more than four (c) Double drum gear pipe

motorized winch with 6mm dia S.S. Rod (For 16 mtr and above size)(d) Approved

make L.E.D. aviation light = 1 No. Lightening arrestor = 1 No. with necessary wiring

of 2.5 sq.mm 5 core ISI copper cable Unarmoured. 1.00 Nos. 184438.12

(e) Bottom most section suitable for mounting reversible motor and switchgears

having door not more than 1400mm x 300mm with waterproof gasket & hinges &

locking arrangement.

(f) Pole structure comprises suitable size of reversible motor, cable and necessary

switchgears with control panel. (g) bottom section shall have suitable size of

thickness supports ribs foundation bolts nuts etc.(h) Item not comprises the cost

of lanterns.(i) Necessary Cement Concrete foundation as per IS including testing &

commissioning of the entire structure for following size of High Mast poles

[4] High Mast 16 Mtr. TOP A/F 150 Mm, BOTTOM A/F 400 Mm, No. of Sec. No. -

Bottom Thickness - 4 mm, Top Sec. - 3 mm, Size Base Plate - dia.630 mm x 20 mm

thick, Foundation Bolt Size M24 x 870 mm, Qty - 12 Nos., Suitable for mounting 0.00 0.00

Fitting of Light - 10 Nos.

318 Supplying & erecting Amplifier having following specification:

Power Output :250W (RMS) (300W Max.)

inputs : 6 Misc. & 2 Aux.

frequency Response :50-1500HZ I3db

Tone Controls :Cut & Boost type

LED Meter :5 LED Arrays

The amplifier suitable to operate 240V A.C.& 24volt D.C. (Battery) with automatic

changeover from AC to Battery operation, duly protected by wrong Battery

Polarity connections. [[Approved by Competent Authority i.e. not Below the rank

of Executive Engineer ]

319 Supplying & erecting Booster Amplifier having power output of 25OW (RMS,),

suitable to obtain combined power output of two, with 6 mike inputs & suitable to

be used independently as a 250watt amplifier in combination with mike & mixer.

The booster Amplifier shall be without mike &Aux. input channels, The system 1.00 Nos. 9672.77

shall be suitable to operate on 24OV. A.C. & 24 Volts D.C. Battery. [[Approved by

Competent Authority i.e. not Below the rank of Executive Engineer ]

320 Supplying & erecting recess wall mounting speaker with 5W rated input power

K. Ohms / 3W impedance, 100 - 10000 Hz frequency response with 6 inch dia. cone

type 8 ohms speakers duly fitted in ABS plastic cabinet of colour match with wall

or ceiling of following size. [[Approved by Competent Authority i.e. not Below the 54.00 Nos. 591.86

rank of Executive Engineer ] (b)Square shaped 260 x 260mm size speaker

321 Supplying microphones stands with sturdy mechanism, treble free movement &

positioning of microphones, free from rust with superior quality of chrome plating

with following size. [[Approved by Competent Authority i.e. not Below the rank of 2.00 Nos. 445.41

Executive Engineer ] (c)Fixed height 91 cms. & extendable up to 62 cms. with

round base of dia. 23 cms.

322 Supplying, installing and testing approved make microphone for All purpose, with

frequency response of 100 - 11000 Hz, having sensitivity 2.2mv / Pa & impedance

500 Ohms (LO- Z) supplied with quick detachable holder, 6 mtr twin core cable & 3 2.00 Nos. 1284.72

pin XLR connector. [[Approved by Competent Authority i.e. not Below the rank of

Executive Engineer ]

323 Providing & erecting water cooler having storage capacity 150 Ltr. & cooling

capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the

water should drop by 15˚C within a hour, The water cooler should be comprising of

hermetically sealed compressor, fan motor, condensing unit, water tank 6.00 Nos. 55893.40

surrounded by evaporating, coil, thermostats, relay etc.complete with necessary

inlet & outlet connection. The body of water cooler will be made from Stainless

324 Supplying & erecting reverse osmosis (RO) water purification system with M.S.

powder coated pedestal frame, prefilter housing carbon filter suitable buster DC

pump, auto low & high pressure switches with following size of LPH capacity &

erected as directed.[D] 100 LPH with 1 phase / 3 phase Raw water pump of 500LPH

@ 2.5kg/cm2 - (1N0 - Kirloskar /CRI/Lubi), Dual media filter 10"x54" - (1 No), 6.00 Nos. 77891.20

Micron cartridge filter 20" x 2.5" ( 1No), High pressure pump 500LPH @ 10kg/cm2 -

(1No - Shimge /CRI /Lubi), RO Membrane housing with RO membrane of 40*40 -

(1No), RO pressure tube 4" x 1E - ( 1No), 0 - 1200LPH Rotameter -(2 Nos), with

Recovery Rate 50%.

325 Supplying and erecting horizontal / vertical mounting type storage water heater

with copper container housed in M.S./S.S./ABS body insulated with glass wool/puff

complete with heating elements,adjustable thermostats 300C to 850C, indicating

lamp, safety valve, fusible plug, etc.complete erected with coach bolts, nuts. 24.00 Nos. 15195.45

washers & cementation (E)50 Ltr. with 2 KW. heating element.Premium Category

326 Supplying and erecting approved make panel mounting type Digital Voltmeter

having 3 digits LED display, 0 to 750 AC Volts range erected on existing panel

board with all connection, wiring etc .with manufacturers calibration certificate. 7.00 Nos. 1275.63

327 Supplying and erecting approved make panel mounting type Digital Ammeter

having 3 digits LED display, external CT operated, calibrated for 0 to 1000 Amps

suitable to operate on 500 Volt AC , erected on existing panel board with all 7.00 Nos. 1558.43

connection, wiring etc. with manufacturers calibration certificate.

328 Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC

Supply 500 V on existing panel board with necessary connections. 14.00 Nos. 317.14

329 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5

ratio 15 VA burden erected in existing CRCA box duly secured with insulating 21.00 Nos. 274.72

materials connected to the meter.

330 Supplying and erecting approved make suitable panel indicator LED type lamp,

lens cover, complete erected with necessary connections. 21.00 Nos. 43.43

331 Providing & erecting open well horizontal mono block pump set with cast iron

body, complete for three phase submersible motor having.[D] For 5 HP 3 phase

open well horizontal mono block pump set suitable for 1350 LPM to 310 LPM @ 10 2.00 Nos. 18746.61

to 42 Mtr head suitable for 50/65 mm dia delivery pipe.Cat.II

332 Supplying & erecting approved make motor control cubical panel [Star delta]

made from 16G CRCA sheet duly epoxy powder painted inside and outside with

hinged doors and locking with suitable size of ON - OFF isolator (AC 3 / 23 duty)

main fuses. Digital volt and current meter (in a single unit) with micro controller

based control unit and current sensing single phasing preventer electronic

overload protection, over voltage (Programmable) protection and under voltage

(Programmable) protection, prod less dry run protection programming facility for 2.00 Nos. 7250.79

setting of all parameter like overload current, high voltage limit, low voltage limit,

dry run limit with digital indication on seven segment LED display for any fault like

over load, high voltage, low voltage, dry running single crimped, electronic star

delta timer, feather touch start / stop push buttons to be erected on angle iron

frame. Grouted on wall the contactors will be of L& T, Siemens, BCH make only)(A)

DOL up to 5.0 H.P.

333 Lowering of submersible motor pump set at the depth of following ,complete with

required. Nos. and size of casing pipes erected by means of proper chain pulley

block & pipe wrenches after checking of threads of each pipe with coupling to take

the load of the pump set and pipe assembly filled up with water (D)For Open well 2.00 Nos. 856.48

Horizontal submersible pump set for sump well (i) 1 HP to 5 HP

334 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible

Submersible copper cable approved make of following Size.(B) 3 Core x 2.5 Sq. 30.00 Mtr. 104.03

335 Supplying, & erecting C.I. swing, check type non-return (Reflux) Valve -ISI marked

suitable for following size.(A) 50 mm dia. 2.00 Nos. 1020.10

336 Supplying of following size of HEAVY UPVC column pipe with coupler and wire

lock.[B] 50 mm dia 30.00 RMT 359.56

337 Supply of following size of TOP & BOTTOM accessories i.e. Adaptor set (CI) long,

pump guard set, starter pipe Rubber ring for submersible pump & UPVC column

pipe as directed by Engineer - in - charge with necessary plumbing as desired.[D] 4.00 Per Set 1489.75

338 Supplying and erecting, commissioning and testing of Diesel Generating set

confirming to IS: 4722:1968 & BS:5514 having continuous rating, 3 phase,

volts, 50 cycles A.C. supply comprising of a totally enclosed air/water cooled diesel

engine with multi-cylinders developing suitable BHP not less than following

capacity at 1500 RPM with 10% overload for one hour in 24 hours with standard

accessories like fly wheel, lubricating oil cooler, "A" class governor, heavy duty fuel

wheel and lubricating oil filter, oil bath air filler, lubricating oil pressure gauge, end

exhaust manifold, standard set of tools with adjustable spanners, screw drivers,

cylinder head to cover, joint cylinder head to exhaust, element lube oil filter, 12 /

24 volts electric starting equipment complete with standard heavy duty battery,

dynamo, cut-outs, ammeter, necessary wiring, pressure gauge, starter etc and

heavy duty Residential type exhaust silencer (With DEF System) and vertical hot

air duct both logged with asbestos rope, save oil trays, exhaust piping of required

length, standard wall/floor mounted fuel with level indicator and piping and drip

proof alternator, self excited, self regulated, screen protected, with excitation

system, capable of delivering the rated system output at 415 volts, 3 phase, 0.8 PF,

running at 1500 RPM, conforming to IS-4722- 1968 with voltage regulation +/-

5% of rated voltage from no load to full load. Both the engine and alternator fitted

on a common fabricated steel base plate with antivibration mounting engine

and alternator both connected to each other by flexible flange coupling and with

floor/wall mounted control panel box comprising of voltmeter ammeter, selector

switches, ACB / MCCB / MCB of adequate capacity,indicator lamps duly wired with

HRC fuses. The alternator & control panel shall be connected with provided

suitable capacity armoured cable and complete with Acoustic enclosure (canopy)

made out of 16 SWG CRCA Sheet, sound absorbing material Rockwool of 64 0.00 0.00

density & 100 mm thick conforming to IS:8183 / PU Foam of 40 Density - at least

40 mm. The resin bonded rockwool covered from inside the canopy by perforated

sheet with 3/4 mm holes, sound level not more than 75 dB at a distance of 1 mtr,

as per PVCT norms.DG set should have in built fuel tank capacity of minimum 8 hrs

of continous running capacity on full load . Erection, commissioning and

satisfactory testing as per requirement with first filling of fuel (minimum up to the

80% of fuel tank capacity), oil, etc.

with guarantee / Warrantee of complete system for Two years. & with obtaining

all necessary certificate from Electrical Inspector. The Capacity and Ratings of DG

sets are as below. (As per new CPCB4+ Emission norms Engine With - Turbo

Charger, EGR (Exhaust Gas Recirculation), CRS (Common Rail Fuel System), DOC 0.00 0.00

(Diesel Oxidation Catalyst), SCR (Selective Catalytic Reduction), Integrated wiring

harness connected to ECU .)(K) Continuous rating of 82.5 KVA ,BHP not less than

339 Providing & erecting approved make ATS panel suitable for following size of

phase, 415 V., 50 cycles, A.C. diesel generating set complete of scope as detailed

1) Power module: Motorised Changeover switch with ATS controller, Auxiliary

contactor with NO & NC contacts with Automatic Battery Charger, indicating lamps 1.00 No. 63340.13

for Generator ON, Mains ON, Load and suitable control terminals and power

terminals with neutral earthing studs.(D) ATS Panel for 75 KVA/82.5 KVA3 phase

340 Supply, Installation, Testing & Commissioning of following size of Grid Tied Solar

Power Plant with Solar Panels (ALMM approved): Frame Material : Anodized

Aluminum alloy Frame With Twin Wall Profile, Front Cover : High Transmission Low-

Iron Tempered Glass (AR Coated), High efficency and positive power tolerance

Pmax: 0/+5, Module Efficiency should be approx. 19.5%-22%, Normal operating

temperature 45'C, Junction Box with Waterproof IP67 & MC4 Compatible and

Enclosed with Bypass diodes, 100% Electroluminescence test to ensure error free

Modules, Thep. temp. co-efficient of the PV module shall equal or better than -

0.45%/degree C. Solar PV modules of minimum fill factor 75% to be used.

Unit Production:- More than 4.5 Unit /kw /day (Actual)(1Year Avg) With 10 year

Product warranty and 25 year Linear Power Warranty includes all mechanical and

electrical parameters of the Solar panel. Modules must be complied to the

DCR(Domestic content requirements). The Ration of AC to DC is 5:6 for the

Installation capacity which are given in AC KW.

Solar Inverter: MPPT Range: MPPT Range: 80-1000 V , Max efficiency: 97.5% -

98.9%, O/p Frequency: 50/60Hz, Operating Altitude (m) ≤4000, O/p Power Factor:

~1, O/P THDi: <3%, Operating Tempreture Range: -25~60°C, Integrated protection

of Inverter are Anti-islanding Protection, Input Reverse Polarity Protection,

Insulation Resistor Detection, Ground fault protection, Residual Current

Monitoring Unit, Output Over Current Protection, Output Short Circuit Protection,

Output Over Voltage Protection, PV array string fault Protection. Protection

Degree: IP65, User Interface LCD & APP, Datalogger & Communication: GPRS / Wi-

Integrated, Input Reverse Polarity Protection Integrated, Insulation Resistor

Detection Integrated, Residual Current Monitoring Unit Integrated, Output Over

Current Protection Integrated, Output Short Circuit Protection Integrated, Output

Over Voltage Protection Integrated, Protection Degree: IP65, User Interface LCD &

APP,Datalogger & Communication: GPRS / Wi-Fi, Module Mounting Structure: The

mounting (Rectangular pipe / square pipe / circular pipe) with requisite cross bars,

nuts and bolts, etc. shall be Hot deep galvanized with minimum 80micron coating.

The Rectangular / square /circular hollow pipe section used for the structure

should have a minimum thickness of 2.0 mm. other than above, the material 0.00 0.00

thickness should be minimum 2.5 mm. A certificate of a structural engineer

certifying the strength and stability of the mounting structure to withstand the

weight and wind speed of 150 km/hour throughout the life span of 25 years of the

system, shall be submitted by the vendors. Hot Dipped Galvanized steel coils.

suitable arrangement for base plate for foundation , solar panel mounting, the

structure should be suitable for carry the load of solar panel,wiring, sprinkler

with necessary foundation work/wall mount, j bolt, anchor fastner etc. the nut

bolt used for installtion of stucture should be (SS 304) quality.The ground

clearance of the bottom most edge of solar panel shall not be less than 300 mm to

1200 mm or as per site’s technical/feasibility requirement. a. Column –The

minimum section (thickness) should be 60MM*40MM

b. Rafter - The minimum section (thickness) should be 60MM*40MM

c. Purlin - The minimum section (thickness) should be 40MM * 40MM Balane of

System with necessary Swichgears (Suitabel size and protection of ACDB & DCDB), 0.00 0.00

inter connecting wiring, earthing system as per the CEIG drawing approval,

lightining arrester system as per the CEIG drawing approval, all liasoning work with

various gov. dipartment like state nodal agency,DISCOM & CEIG is included in

agency scope (Excluding All charges namely GEDA Application fees, Solar

connectivity Charges, Meter connectivity Charges, Meter testing Charges and

system stability/strenthning charges.)(E) Grid Tied Solar Power System: 51 -

In Word : Nineteen Crore Thirty Six Lakh Sixty Two Thousand Six Hundred Eighty Eight Rupees and Twenty Two Paise Only.

I/We am/are willing to carry out the work at… % above/below percent(Should be written in figures and words) of the estimated rate

mentioned above. Amount of my /our tender works out as under.

* Estimated Amount * Estimated Amount

put to tender put to tender

Deduct :…………% Below Add :………%Above

In Words …………………………………… In Words………………………………

* (Please strike out whichever is not applicable).

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no

extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the

cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all

5 The amount of dismentalled credit materials at Rs. 4339500.3 shall be deducted from first R.A. Bill.

6 The Contractor will have to submit the mix design for different grades his own cost befor execution as directed and to be approved

From the Engineer In Charge.

Deputy Executive Engineer Executive Engineer

Const.(R&B) Sub Division Rajpipla (R&B) Division

Dediapada Rajpipla