PROVN OF SANITARY BLOCK AND ALLIED FACILITIES AT 511 ASC BN AND PROVN OF INTERLOCKING TILE PATH HARD STANDING AT CERTAIN PLACES AT CSD DEPOT UNDER AGE BR II UNDER GE A AHMEDABAD

Amount

Excavation in trenches n,exc 1.5 mtr deep & wide and getting out in soft loose soil complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggt as in foundation, filling, mass concrete complete all as specified and directed.

M&L mild steel TMT bar 10 mm dia or above as in rainforcement cut to length bend to shape required and binding with and incl mild steel wire (annealed ) not less than 0.9 mm dia complete all as specified and directed.

M&L mild steel TMT bar 6mm to 8mm dia or above as in rainforcement cut to length bend to shape required and binding with and incl mild steel wire (annealed ) not less than 0.9 mm dia complete all as specified and directed.

M&L for Mild steel TMT bar 8 mm dia as in stirrups incl bending and binding with and incl mild steel wire not less than 0.9 mm dia complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; verticle or to better,surface finished fair complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunch girders, bressummers,lintels, cantilevers, shelves including supports,overhangs etc. also splays between floors and beams, etc complete all as specified and directed.

Use and waste of formwork to sides of pillars posts, struts, piers, columns & stanchions square rectangular or polygonal fair finished surfaces in shape all as specified & as directed

Use and waste of formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and simila rwork exc 10cm but n exc 20cm complete all as specified and directed.

M & L for M-25 design mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc complete all as specified and as directed

M & L for M-25 design mix as in columns, pillars, piers, posts and struts etc complete all as specified and as directed

M & L for M-25 design mix as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like complete all as specified and directed.

M & L for M-25 design mix as in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed

Returning ,filling in ,including ,spreading , levelling , watering and well ramming in layers n, exc, 15 cm complete all as specified and as directed.

Removing excavated material n. exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.

M&L brick work with sub class "B" old size bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed.

M&L damp proofing course 40mm in cement concrete 1:2:4, type B-0 using 12.50mm stone aggt to horizontal or vertical surfaces including necessary formwork complete all as specified and as directed

Filling under floor with excavated soil as required from item No 01 above and spreading and levelling in layers including watering and well ramming complete all as specified and directed.

M&L for hardcore of guage n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface with broken stone or boulder complete all as specified and directed.

M & L for 75 mm thick PCC type D-2, 1:4:8 (40mm graded aggregate) as in sub base of flooring complete all as specified.

M&L for PCC (1:3:6)type C-2 using 40mm graded aggregate 75mm thick as in plinth protection complete all as specified and directed.

M&L for half brick thick brick work with sub class "B" bricks straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified.

M&L for 10mm thick rendering in CM 1:3 finished even and smooth without using extra cement on ceiling ,chajja etc complete all as specified and directed

M & L for 15 mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished even and smooth without using extra cement complete all as specified and directed.

M & L for 15 mm thick cement plaster in cement mortar 1:6 on concrete or brick surface and finished even and smooth without using extra cement complete all as specified and directed.

M&L for Non Skid ceramic coloured joint free tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.06 Sqm but n. exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Glazed ceramic coloured joint free tiles of size 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 15mm thick backing coat CM 1:4 complete all as specified and directed.

M&L 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (stylel)consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC "C" channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour,PVC sheet for top rail,lock rail & bottom rail ,paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rail with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame of site as per specification and drawing given in page No 146 of SSR Pt-II (2004)(make Raj shree or sintex) complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S. square tube, complete all as specified.

S&F 150mm long aluminium anodised barrel tower bolt of extlruded section complete all as specified and directed.

S&F stainless steel butt hinges medium weight 100 mm long complete all as specified and directed

M&L for 150mm long extructed aluminium handle fabricated type complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolt with hasp and staple ( bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete all as specified and directed.

S&F powder coated aluminium ventilator partly louvered and partly fixed with and incl 4 mm thick frosted glass , 0.36mm dia and 1.18mm aperture stainless steel jally (Fixed outside of frame) complete all as specified and directed.

Material & Labour for preparation of new surfaces of wall and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

M&l for preparation of newly plastered surfaces of wall and applying three coats of White wash complete all as specified and directed.

M&l for preparation of newly plastered surfaces of Ceiling and applying two coats of White wash complete all as specified and directed.

S&F 110mm bore PVC pipe single socketed in any length laid in trenches and floor complete all as specified and directed.

S&F 75 mm bore PVC pipe single socketed in any length laid in trenches and floor complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.

S&FPVC bends any radius 110 mm bore complete all as specified and directed.

S&F PVC bends any radius 75 mm bore complete all as specified and directed.

S&F PVC (SWR) 110 mm dia branch piece, single ‘Y’ equal or unequal complete all as specified and directed.

S&FPVC (SWR) 75 mm dia branch piece, single ‘Y’ equal or unequal complete all as specified and directed.

S&FPVC (SWR) 110 mm dia branch piece, single ‘Y’ double or unequal complete all as specified and directed.

S&F PVC (SWR) 75 mm dia branch piece, single ‘Y’ double or unequal complete all as specified and directed.

S&F PVC floor trap with grating including jointing waste pipe in runlead 75mm dia fixed in jointing with solvent cement complete as per direction of y Engr-in-Charge.

S&F vitreous china wash down water closet pan (Pedestal pattern) coloured including fixing bolt and plastic water closet seat black closed pattern with flat bottom cover with MS chromium plated hinging devices to matching colour.

S&F plastic water closet seat cover white closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device complete

S &F vitreous china water closet Squatting Orissa patern white size 580 x 440mm with integral foot rest with P or S trap including, fush pipe etc compete all as specified.

S&F CP health faucet fixed to water closet any type of WC with 1.5m flexible pipe and hook complete all as specified and directed.

S&F vitreous china wash basin, white flat back size 550x400 mm including waste pipe, brackets and cutting for and pinning in ends of brackets or errecting stand but excl taps, chain and plug complete all as specified and directed.

S&F brass CP shower rose 125 mm size with or without swivel joint and fixing to steel pipe complete all as specified and directed.

S&F C.P towel Rail 60 cm long ‘D’ type 20 mm dia complete all as specified and directed.

Supply and fixing for steel water tubing medium grade galvanised incl short length fixed to wall ceiling or laid in floors with all fittings (Such as bends elbow, tee, short pieces, connections back buts dimnishing pieces, caps and plugs union etc) of 15mm bore complete all as specified

All as per srl item No 58 baove but 20mm bore and -ditto-

Supply and fixing stop valves/angle cock 15mm bore cost copper alloy srewed dowh high pressure,brass polished finished with crutch or butterfly handles screwed both ends for iron pipes or for unions and fixed complete all as specified and directed

Supply and fixing bib taps cast copper alloy with crutch or butterfly handles screwed for iorn pipe or for brass ferrule and fixed to 15mm bore pipe complete all as specified and directed

Supply and fixing low density PVC connection commercial quality 450mm long incl PTMT nuts at both sides of 15mm bore and fixed complete all as specified and directed.

Supply and fixed pillar taps cast copper alloy with capstan head, chroumim plated fancy type. Screwed down high pressure with or w/o lettered "Hot" or "cold" with long screwed shanks and flynuts of 15mm bore complete all as specified and directed.

S&F PVC flushing cistern low level 10 Ltr capacity of approved make including fixing of brackets connection to WC with CI brackets and making good disturbed area complete all as directed.

S&F 500 ltr Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 15 mm dia ball valve and gun metal valve 20 mm dia all as specified in SSR Part I complete all as specified and directed.

S&F 1000 ltr Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20mm dia ball valve and gun metal valve 20 mm diaall as specified in SSR Part I complete all as specified and directed.

S&F vitreous china urinal bowel type ( back or corner wall type and fixing plugs beeding urinal against wall in cement mortar 1:2 securing plugs with and 60mm long brass screws, pointing around urinal backin cement and with grating and union for discharge pipe complete all as specified and directed.

M&L Salt-glazed stoneware gully trap 125/100 mm, setting and jointing with solvent cement complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth complete all as specified and directed

S&F steel work in tubular trusses, purlins, including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240, including distances pieces, base plates, nut bolts etc including complete all as specified and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk)forming holes, cleats etc including welding as necessary conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F 10mm thick multi wall Polycarbonate sheet of colour as approved, fixed in roofs, wall cladding etc with screw - bolts as per manufacturers instructions complete all as specified and directed.

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified.

M & L 15mm thick plastering in cement mortar 1:3 mixed with approved water proofing compound @ 2% on RCC roof surfaces. Note:- WPC shall be measured separately.

Supply only integral water proofing compound

Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and directed.

M&Lfor precast PCC kerbs stone machine pressed factory made of size 250 to 450mm long 100mm thk and 350mm depth in PCC 1:2:4 type BO using 12.5mm graded curshed stone aggregate incl neceassary earth work complete all as specified and directed.

M&L 100mm thick cement concrete 1:4:8 type D2 (40mm graded stone aggregate) incl necessary form work as in sub base of path complete all as specified and directed.

M&L sand filling 50mm thick over floor or in foundations incl well ramming

M&L machine pressed pre-cast coloured designer type concrete inter-locking paver block any shape and size conforming to IS 15658-2006 of 80mm thickness, M-40 grade with grey cement and pigment

M&L for cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation complete all as specified and directed.

M&L brick work with sub class "B" old size bricks straigth or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed.

M&L rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished the surfaces even and smooth with using extra cement with waterproofing compound. ( water proofing compound paid and mesured seprately)

M&L for PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggt as in coping /benching in man hole etc,finished even and smooth using extra cement incl necessary form work complete all as specified and directed.

M&L for PCC(1:3:6) type C-2(Using 40mm graded stone aggregate) to bed of drain pipe incl. packing under and haunching against the pipe after they are laid and tested for 200mm bore complete all as specified & directed.

M&L for laying and jointing RCC Class NP-2 drain pipewith collars of internal dia 200mm complete all as specified and directed.

Removing excavated soil exc 1.5 KM and deposited where directed at available n exc 5.0 KM above the starting point complete all as specified and directed..

M&L pre-cast reinforced cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in landing cover slabs (for manholes etc) complete all as specified & directed (reinforcement shall be measured & paid separately).

M&L mild steel round bars 10mm dia and over ,Fe-410-W (Gde.E-250) ,quality-A or Fe 290 (Gde - E-165) cut to length bent to shape required & cranking, binding, spirally for hopping for hooking ends & binding with MS steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for cutting into existing manholes for connecting new drain pipe making good to pipe & rendering cutting out existing benching for and forming branch channel(1/2 round or ¾ in section) in cement concrete 1:2:4 type B-1 smooth finish and reforming benching as required complete for 150mm internal dia pipe all as directed.

Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators complete for the following :-

One light point controlled by one switch.

One fan point controlled by one switch.

Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for one 16 amp socket outlet controlled by one switch on independent board complete.

S&F angle holder, insulated polycabonate body with back plate complete.

S&F switch piano flush button single pole one way 6 amp complete.

S&F switch piano flush button single pole one way 16 amp complete.

S&F socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete.

S&F ceiling rose 6 amp, 3 plates polycarbonate body complete.

S&F LED batten (1.2 m) made of Aluminium housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete. Make : Philips cat ref no. ENDURALED BATTEN " BN 108C LED 20S PSU CDL WH " or Havells Lumiline plus as approved.

S&F LED bulkhead fitting 9 watt IP 66 & IK 09 with pressure diecast aluminum housing & polycarbonate diffuser duly prewired for connection with flexible multi stranded copper conductor cable as required all as per Philips cat ref no. WT202W LED6S CW PSU S1 PC or equivalent in Wipro or Bajaj or Havells as approved.

S&F MCB distribution board SPN, 240 volts, 4 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

S&F MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

S&F MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

Single pole 6 to 16 amp. Make - Legrand DX3 cat ref no. 408587 to 408592 or equivalent in Schneider or Hager as approved.

Double pole 32 amp. Make - Legrand DX3 cat ref no. 408636 or equivalent in Schneider or Hager as approved.

S&F air ventilation fan 250 mm in toilet in rectangular in shape, PVC body, white colour 230V including louber shutter complete all as specified and directed. Make : Bajaj / Havells / Crompton

M&L for earthing with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 metre beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work complete.

Cutting existing steel tubing for alterations or aditions of pipe size 40/50 mm bore and screwing complete.

M&L for stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 20 mm bore complete.

M&L for gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe 50 mm bore complete.

S&F steel tubes light grade galvanised with all fittings fixed to walls / floors / poles / road crossing etc of 40 mm bore complete.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core complete. Make - Havells / Polycab / Finolex as approved.

M&L for sand filling in trenches with clean dry fine sand unwashed including gently punning around cables complete.

Supplying and laying old size bricks, common burnt clay building bricks sub class 'B' designation 75 laid in trenches over sand for cable protection complete.

CSD Work

Surface excavation n.exe (not exceeding) 30cm deep & averaging 15cm deep & getting out in hard /dense soil comple all as directed

M&l for hardcore of guage n. exc63mm, deposited, spread & leveled in layers n exc. 15 cm thick, watered & rammed to a true surface using b roken stone or boulders complete all as specified and directed.

M&L 100 mm thick Cement concrete type D2, 1:4:8 (40mm grade aggregate) as in sub base complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Gradelaid over 25 mm thick sand cusion complete with joint filling complete all as specified and directed.

M& L for Providing, plain cement concrete 1:2:4 type B1 (20 mm stone aggregate) in window or door cills, lintels, bressummers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels,edging for paver blocks brackets, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in mortar complete with joints to match and including all reqired shuttering complete all as specified and directed .

Removing excavated materials n. exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point.

nirman construction