Work of Construction AND bifurcation of 33 KV Lines at 1 places under the area of EDD-IV Ballia on semi-turnkey basis (under Business plan 2024-25)

Supply of following decentralised materials as per RESSPO/PuVVNL norms at the work site.

33 KV Line isolater 800 amp at 33/11 KV S/S Takarshan

33 KV isolater structure

33 KV ‘V’ Type Cross Arm

33 KV Side Cross Arm with Clamp with Nut Bolt washer

11 KV Side Cross Arm with Clamp with Nut Bolt washer

Cross Arm Holding clamp with Bolt & Nut

‘F’ Bracket with Bolt & Nut

Danger Board with Clamp with Bolt & Nut

Barbed wire

Earthing complete by MS earthing rod 20x2500 mm with GI Wire

Packing Piece.

M.S. Angle Iron 65x65x6mm bracing with clamps

Top Channel 125X65X3200 mm with clamps

P.G. Clamp for ‘Dog’

‘E’ Bracket for 33 KV with Bolt & Nut

Guarding Channel/Angle 75x40x3010mm

Guarding clamp with Bolt & Nuts

G.I. wire 5 SWG

33 KV ‘XLPE’ C/J Kit 3x300mm² Outdoor

Al. Lug 3x300 SQ mm

33 KV Polymer Disc Insulator 70 KN

33 KV Disc fitting B&S Type

33 KV Polymer Pin Insulator

Stay complete ( GI Stay ROD 20X1800mm , stay wire 7/8 SWG 10 kg, stay clamp, nut bolt and washer with concrete grouting)

Shifting,loading ,carriage& unloading of following materials on private truck at store centre Ballia & Un-loading of the same with proper stacking at work site .

S.T. Pole 11 M long IS-410 SP-55

S.T. Pole 13 M long.

P.C.C. Pole 9M long

ACSR ‘Dog’ Conductor

33 KV ‘XLPE’ Cable 3x300mm²

Work of following materials as per RESSPO/PuVVNL norms at the work site.

Erection of Single pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection, & fitting of all accessories ( 'V' type cross arm 100 x 50 x 6 mm,/side arm with clamps with bolt and nut, composite polymer pin, insulator. complete as per RESSPO Norms).

Erection of Double pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection & fitting of all accessories top channel 125 x 65 x 3200 mm with clamps complete,disc insulater with fitting,etc as per RESSPO Norms) .

Erection of Single pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, & fitting of all accessories ( 'V' type cross arm 100 x 50 x 6 mm,/side arm with clamps with bolt and nut, composite polymer pin, insulator. complete as per RESSPO Norms).

Erection of Single pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, & fitting of all accessories ( 'V' type cross arm 100 x 50 x 6 mm,/side arm with clamps with bolt and nut, composite polymer pin, insulator. complete as per RESSPO Norms). in old line between S/S Raghunathpur to Dubahad S/S as per site required.

Erection of Single pole structure on 13 mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, & fitting of all accessories ( 'V' type cross arm 100 x 50 x 6 mm,/side arm with clamps with bolt and nut, composite polymer pin, insulator. complete as per RESSPO Norms).

Erection of Double pole structure on 11 Mtr ST Pole including all works of evocation of pit, pole erection & fitting of all accessories top channel 125 x 65 x 3200 mm with clamps complete,disc insulater with fitting,etc as per RESSPO Norms) .

Erection of Four pole structure on 11 Mtr ST Pole/PCC Pole 9Mtr including all works of evocation of pit, pole erection & fitting of all accessories top channel 125 x 65 x 3200 mm with clamps complete,disc insulater with fitting,etc as per RESSPO Norms) .

Erection of Tri pole structure on 11 Mtr ST Pole/PCC Pole 9Mtr including all works of evocation of pit, pole erection & fitting of all accessories top channel 125 x 65 x 3200 mm with clamps complete,disc insulater with fitting,etc as per RESSPO Norms) .

Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.

Grouting of stay rods (20 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per RESSPO Norms

Chopping of branches of trees of eucalyptus, Neem, Keekar and other kind of trees along the route of the line and disposal of the same at suitable place by required place of forest department. ( Rate as per site due to heavy tree cuttung)

Guarding between two poles like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. as per RESSPO Norms

Jointing charges of 33 KV ‘XLPE’ C/J Kit 3x300mm² Outdoor

Laying of 33 KV 3x300 mm² ‘XLPE’ cable(D/C) of Double cable by digging pit & making trench in Proper size(1.2M depth x1M wide) below ground level by fixing bricks(4½˝)on both side of trench wall and 9˝ brick work at the centre of the trench along the cable.Fixing brick slab on top after filling sand around both the cable including cost of bricks/ HDD Method as per site required.

Laying of 33KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3.5 m long Complete work.

GI Pipe Earthing Complete for Cable jointing Kit with materials

Fabrication of 13 M long S.T. pole by welding 3.0 M long 5" dia M.S. pipe & Flat Iron 50x6 mm 12" long by providing M.S. pipe and all other materials by the contractor and only S.T. poles 11 Mtr. Long will be provided by the department.

Fabrication work of PCC 9 Mtr for different crossing work in construction of line as per required by 33 KV Top channel with all clamps after providing etc complete work work.

Dismentling of existing 11 KV V-xarm/ top channel on existing poles and fitting of new side arm on existing poles & Shifting of Existing 11 KV line/LT Line on ACSR weasal/Dog Conducter by safe dismentling of ACSR weasal/Dog Conducter & Re-Stringing of ACSR weasal/Dog Conducter on shifted poles/side arm with complete work after providing all required materials for shifting.

Shifting of Existing single Poles of HT/LT lines for providing passage for 33 KV line Dubahad by safe dismentling of existing single pole & Re-Erection of existing poles with complete work after providing side -arm with all accessories etc complete work after providing all required materials for above work.

Erection and grouting of 33 KV Isolator structure & Painting of isolater structure as per RESSPO at 33/11 KV S/S Takarshan with complete work after providing all required materials for workcomplition.

Erection , Mounting & fitting of 33 KV Line Isolator 800 amp on erected structure with complete earthing as per RESSPO at 33/11 KV S/S Takarshan with complete work after providing all required materials for workcomplition.

Jumpering of 33 KV Cable to 33 KV Line isolater and line isoater to Cable and overhead line etc work complete by Alluminium Lug & PG Clamp for dog with complete work

Conducter Replacement from ACSR weasal/Raccoon conducter to ACSR Dog Conducter between Raghunathpur Dubahad-Takarshan Tapping Point to 33/11 KV S/S Dubahad in different places as per site required by safe dismentling of existing ACSR weasal/Raccoon conducter & Re-stringing of New ACSR Dog conducter as per complete work in all respect including jumpering ,winding etc. ( Per span = 3 phase conducter ) (as per request letter of JE/SDO of 33/11 KV S/S Dubahad,Letter attached)

Loading ,unloading ,carriage & unloading of Existing old ,used & damaged ACSR weasal/Raccon conducter from work site to store centre Ballia

Re-straightening of existing Tilted poles in existing line between Raghunathpur Dubahad-Takarshan Tapping Point to 33/11 KV S/S Dubahad in different places as per site required

Tapping work completed at 33 KV Line Raghunathpur To Dubahad at Raghunathpur by bifercation of existing 33 KV Line Raghunathpur from existing line & connecting 33 KV new line to outgoing 33 KV Line Raghunathpur to Dubahad at Raghunathpur complete work after providing all required materials for complition of above work etc complete.

Earthing of poles by MS earthing rod 20x2500 mm with GI Wire as per RESSPO Norms

Concriting of poles as per RESSPO Norms

Making plinth for Poles as per RESSPO Norms

Fixing of danger boards on poles as per RESSPO Norms

Fixing of Barbed wire on poles as per RESSPO Norms

Painting of ST Poles as per RESSPO Norms by red oxide paint & Alluminium paint by two coats .

Fitting of 33 KV MS Bracing angle on Double pole , TRI-Pole & four Pole

Jumpering of 33 KV Cable to overhead 33 KV Line by Alluminium Lug & PG Clamp for dog wityh complete work.( 1 Job=1 No D/P)

Fixing of PG Clamps

PRAVEEN CONSTRUCTION AND SUPPLIER

M/s. Yuwa Shakti Construction