Construction of new E-2 type Quarter Ta.Vanthali, Dist.Junagadh

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful

1 materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil 78.00 122.93 Cum

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful

2 materials and disposing off the excavated stuff upto 50 Meter lead.(B) Dense or Hard 47.00 157.15 Cum

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful

3 materials and disposing off the excavated stuff upto 50 Meter lead.(C) Hard Murrum 47.00 268.92 Cum

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and

4 stacking of useful materials and disposing off the excavated stuff upto 50 Meter 88.00 300.02 Cum

lead. (D) Soft rock not requiring Blasting

Providing and laying controlled cement concrete M.150 for curing complete excluding

5 cost of formwork and reinforcement for reinforced concrete work in (A) Foundations, 39.00 4028.21 Cum

footings,Base of columns and Mass concrete

Providing and laying controlled C.C.M.250 & curing complete including the cost of form

work but including the cost of reinforcement for reinforced concrete work in

foundation,footing bases of columns and the like and mass concrete.

Providing and laying controlled C.C. M.250 & curing complete including the cost of form

7 work but excluding the cost of reinforcement for reinforced concrete work in Collumns, 16.00 8581.97 Cum

up to plinth.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and laying cement concrete 1:3:6 ( 1 cement: 3 coarse sand: 6crushed stone

8 aggregate 40 mm nominal size ) and curing complete excluding cost of form work (A) in 12.00 3070.93 Cum

foundation and plinth.

Filling available excavated earth (Excluding rock) in trenches plinth, sedes of foundation

9 etc in layers not exceeding 20 cm in depth consolidating each deposited layer by 128.00 136.91 Cum

ramming and watering etc. comp.

including watering, ramming and consolidation etc. complete.

Filling in plinth with sand under floors including watering, ramming consolidating and

dressing etc. complete.

Carring out plinth treatment to post construction / existing structure by spraying

chemical solution for termite control treatment including labour and material

consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC. As Per

12 6131_paret-II Consentration Weight one percent is recommended i.e one litre 20 EC 243.00 59.45 Sqm

chemical emulsion with 19 liter give 1 % concrentration inclusive of one litre chemical

emulsion appication at the rate of 5 Litre chemical / Sqm of surface is recommended as

Providing and laying controlled C.C. M.200 & curing complete including the cost of form

work but excluding the cost of reinforcement for reinforced concrete work in Collumns,

pillars, posts & struts upto floor two levlel .- GROUND FLOOR.

Providing and laying controlled C.C. M.200 & curing complete including the cost of form

work but excluding the cost of reinforcement for reinforced concrete work in Collumns,

pillars, posts & struts upto floor two levlel .- FIRST FLOOR .

Providing and laying controlled C.C. M.200 & curing complete including the cost of form

work but excluding the cost of reinforcement for reinforced concrete work in Collumns,

pillars, posts & struts upto floor two levlel .- SECOND FLOOR

Providing and laying controlled C.C.M.250 & curing complete including the cost of form

16 work but excluding the cost of reinforcement for reinforced concrete work in Beam 26.00 6462.99 Cum

upto floor two level for G.F.(plinth Beam)

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and laying controlled C.C.M.200 & curing complete including the cost of form

17 work but excluding the cost of reinforcement for reinforced concrete work in Beam 30.00 6462.99 Cum

upto floor two level for Ground Floor Slab Beam

Providing and laying controlled C.C.M.200 & curing complete including the cost of form

18 work but excluding the cost of reinforcement for reinforced concrete work in Beam 8.00 6504.40 Cum

upto floor two level for First Floor Slab Beam

Providing and laying Controlled cement concrete M -200 for R.C.C.Lintels, including the

finishing smooth with curing etc complete including the cost of form work but excluding

the cost of reinforcement For Ground Floor. Lintel

Providing and laying Controlled cement concrete M -200 for R.C.C.Lintels, including the

20 finishing smooth with curing etc complete including the cost of form work but excluding 2.00 7841.64 Cum

the cost of reinforcement For First Floor. Lintel

Providing and laying controlled cement concrete M-200 curing complete including the

21 cost of form work but excluding the cost of reinforcement for reinforced concrete work 3.00 6658.93 Cum

in CHHAJJAS Ground Floor

Providing and laying controlled cement concrete M-200 curing complete including the

22 cost of form work but excluding the cost of reinforcement for reinforced concrete work 1.00 6700.34 Cum

in CHHAJJAS First Floor

Providing and laying controlled C.C.M.200 & curing complete including the cost of form

23 work but excluding the cost of reinforcement for reinforced concrete work in Slabs 41.00 6567.02 Cum

,landing, cantilevers for slab (Ground Floor Slab).

Providing and laying controlled C.C.M.200 & curing complete including the cost of form

24 work but excluding the cost of reinforcement for reinforced concrete work in Slabs 12.00 6609.44 Cum

,landing, cantilevers for slab (First Floor Slab)

Providing and laying controlled cement concrete M-200 and curing complete including

25 the cost of form work but excluding the cost of reinforcement for reinforced concrete 1.00 6473.09 Cum

work in RCC WALL CAPS.

Providing and laying controlled C.C.M.200 & curing complete including the cost of form

26 work but excluding the cost of reinforcement for reinforced concrete work in folded 1.00 7545.71 Cum

Stair case up to floor two level.

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including bending,

27 binding and placing in position complete up to floor two level All Floor. 26335.00 77.28 Kg

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

White stone Bela masonry work in course in foundation with stone of approved quality

28 in cement mortar 1:5 (1-Cement:5-fine sand) including racking the joints etc. comp. (Up 26.00 6226.65 Cum

to Plinth)

White Stone Bela mesonry block in course in superstructure with stone of approved

29 quality in Cement Mortar 1:5 (1-Cement :5- course sand) including packing the joints 80.00 6507.94 Cum

etc. complete. GF Mesnory

White Stone Bela mesonry block in course in superstructure with stone of approved

30 quality in Cement Mortar 1:5 (1-Cement :5- course sand) including packing the joints 54.00 6545.75 Cum

etc. complete. FF Mesnory

White stone bella masonary work in partition walls up to 15cm thickness in Cement

Mortar 1:4(1-cement:4-course sand).-(partition masonary .GF)

White stone bella masonary work in partition walls up to 15cm thickness in Cement

Mortar 1:4(1-cement:4-course sand).-(partition masonary .FF)

Providing 15mm thick Mala cement plaster in single coat on smooth finished

(Similar)side of single or half masonary walls for interior plastering upto floor two level

and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) incl.

finishing with a floating coat of neat cement slurry etc.

Providing 10mm thick cement plaster in single coat on celling ,Sofits And Stairs for

plastering finished even and smooth in cement mortar 1:3(1 cement 3 sand ) and

finishing with a floating coat of neat cement slurry and watering, curing etc. complete

up to floor two level.

20mm thick sand faced cement plaster on walls upto height 10 metres above ground

level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm

thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

36 suppllying and filling cinder in sunk portion for all lead and lift tec complete 2.00 799.92 Cum

Providing 20 mm thick cement plaster in single coat on brick / concrete wall for interior

plastering up to floor two level finished even and smooth (ii) Cement mortar 1:3 ( 1-

37 cement ,3 - sand ) and mixing Recrone - S 5 waterproofing materials in cement mortar in 9.00 327.24 Sqm

proportion recommended by the manufacturer for All Floor.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and Laying Acrylic base (Zycosil or equivalent) Water Proofing paint treatment

treatment in two coats of vertical and horizontal surface of depressed portion of

Bath/W.C. as directed by engineer in charge.This treatment shall be carried out over &

above water proofing plaster.

39 Providing throating or plaster drip and moulding to R.C.C. Chhajja. 53.00 43.04 Rmt

Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1

including neat cement finishing, watering etc. complete.

Providing and fixing chiken mesh jali with square of 12.50 x 12.50 mm of 25 gauge at

41 junction the Brick. masonary and reinforcement cement concrete member including 151.00 224.22 Sqm

fixing materials scaffolding labour etc. complete.

Providing 12 mm wide groove / notch in plaster including finishing the same etc.

complete for all height

Providing and fixing 50 mm thick Double shutter doors made from 5 x 10 cm Hollow

box type frame made out from 12 mm thick Water proof plywood, and 1 thick

lamination over it on both sides, Colour, pattern and design is to be approved by

43 the Architech, Colour, pattern and design is to be approved by the Architect, with 9.00 5178.27 Sqm

Stainless Steel handle size 60 Cm Long, Tower Bolt size 25cm, Heavy Duty Floor spring

& Heavy Stainless steel Aldrop as per detail.

Providing and fixing 35 mm thick Flush Door Shutter using anodized aluminum section

frame equivalent to jindal door section no 19552 - weight not less than 1.1 kg / mt. with

wooden inserts for durable grip of door hinges. (frame size 38mmx 63.5 mm.), Shutters

44 with both size Decorative 1 mm thick Laminated, pattern and design is to be approved 26.00 5095.45 Sqm

by the Architect, with Stainless Steel handle size 30 Cm Long, Tower Bolt size 15cm, &

Heavy Stainless steel Aldrop as per detailed drawing / as directed.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and fixing FRP frame size 100x50 mm and 28mm thick FRP depress panel

shutter having extra reinforcement on sides & edges in Gel coat finish. The core of the

shutter & frame is to be filed up with injected fire retardant grade polyurethene foam

done in situ alongwith embedded wooden pieces for stiffening & also taking hinges &

fintures. The whole FRP frame & shutter is to be water proof weather proof, termite

proof & resistance to mild acid/alkali. Rates are to be inclusive of S.S hinges with

necessary screws & alluminium fixtures & fastenings & fastener sleeve.

Providing and fixing Four track sliding window standard extruded color anodized

aluminum section equivalent to jindal series E (30mm) section numbers frame bottom

track 21198 frame top & sides 21204, shutter & bottom top rail 20993, side rails

205553, interlock rails 20550. with Three Shutter 5 mm thick transparent Tinted Float

glass, and Two shutter with Stainless Steel Wiremesh shutters {In Single Track}, rubber

gasket, air lock strip and finishing joints with silicon sealant, with standard extruded

colour anodized aluminium coated fittings and fixture & fastening etc complete.

{Colour as directed by Engineer in charge & Aluminium section shall be Jindal or

equivalent brand and glass of Modiguard, AIS or equivalent brand

Providing and fixing Three track sliding window standard extruded color anodized

aluminum section equivalent to jindal series C (30mm) section numbers frame bottom

track 21203 frame top & sides 20387, shutter & bottom top rail 20993, side rails

205553, interlock rails 20550. with Two Shutter 5 mm thick transparent Tinted Float

glass, and one shutter with Stainless Steel Wiremesh shutters {In Single Track}, rubber

gasket, air lock strip and finishing joints with silicon sealant, with standard extruded

colour anodized aluminium coated fittings and fixture & fastening etc complete.

{Colour as directed by Engineer in charge & Aluminium section shall be Jindal or

equivalent brand and glass of Modiguard, AIS or equivalent brand

Providing and fixing fixed glass window: standard extruded colour anodized

alluminium section equivalent to jindal frame no. 20128, and mullion frame no.

with 5mm thick transparent tinted float glass, with rubber gasket, finishing joints with

transparent silicon sealant, with alluminium powder coated fittings and fixtures. and

fixed glazing above as shown in elevation.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and fixing colour anodised Alluminium sectional ventilators using section

63.50 x 38.10 { Wt 1.50 mm th.} for 5 mm thick transparant tinted glass adjustable Glass

49 or 5 mm thick Fixed Glass as per drawing, including fixture and fastenings and hold 3.00 3601.66 Sqm

fasting with coach bolts etc complete. (Colour as directed by Engineer in charge)

Providing and fixing Safety grills of required pattern for windows / Door using M.S

polished bars at specified spacing inserted and welded inside in Rectangular CRC pipes

50 of required size as per design and hold fasting with coach bolts including one coat of 1622.00 113.12 Kg

primer and two coats of matt finished oil painting etc complete.

Steel work, welded in built up sections framed work including cutting, hoisting, fixing in

position and applying a priming coat of red lead paint. (A)In beams and joists, channels

51 angles Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip 8.00 9108.48 Qntl

and jack rafters, purlins conneted to common rafters and the like

Painting two coats (including priming coat) on new steel and other metal surface with

enamel paint, brushing, interior to give an even shade including cleaning the surface an

even shade including cleanicn the surface of all dirt, dust and other foreign matter.

Providing and laying machine cut free edges, machine polished Granite ( single piece

not more than 1.50 mt) of even grade 18 mm (Average) thick for steps and riser as per

design incl. rounded front edge & 1 cm nosing in trade of steps laid on 20 mm thick

cement mortar 1:6 (1 -cement : 6 coarse sand ) on treads & 10 mm thick Cement mortar

1:3 for risers, jointed with grey cement slurry including rubbing

Providing and laying 60 X 60 CM. GVT TILES in tile flooring over 20mm (ave) base of

C.M. 1:6 on new surface and jointed with colour cement-slurry, and providing and filling

the joint with epoxy grout 4 mm width and 8 to 10 mm deep, including cost of

necessary materials, PVC spacers, filling grout and cleaning etc complete as directed by

engineer in charge. { Colour and Pattern as directed by engineer in charge}

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and laying 60 X 60 CM. GVT TILES in risers of steps. Dado and pillars laid on

mm. thick cement mortar 1:3 (1cement : 3 coarse sand) and jointed with grey cement

slurry including rubbing and polishing etc. complete. (MATCH TO FLOORING)

Providing and laying 60 x 60 cm. hand dressed machine Mirror Polished Blue Kotah

stone flooring over 20 mm. (average) thick base of cement mortar 1:6 (1 cement :

56 coarse sand ) or L.M. 1:1.5 and laid over and jointed with grey cement slurry including 14.00 1019.39 Sqm

rubbing and polishing complete.

(A) 25 mm. Thick

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo

and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and

57 jointed with gray cement slury mixed with pigment to match the shade of slab including 3.00 1109.07 Sqm

rubbing and polishing etc. complete. (MATCH TO FLOORING)

Providing and laying 60 X 60 CM GVT Antiskid Vitrified TILES in tile flooring over 20mm

(ave) base of C.M. 1:6 on new surface and jointed with colour cement-slurry, and

providing and filling the joint with epoxy grout 4 mm width and 8 to 10 mm deep,

including cost of necessary materials, PVC spacers, filling grout and cleaning etc

complete as directed by engineer in charge. { Colour and Pattern as directed by

engineer in charge}

Providing and laying 60 X 60 CM. Antiskid GVT TILES in risers of steps. Dado and pillars

laid on 10 mm. thick cement mortar 1:3 (1cement : 3 coarse sand) and jointed with grey

cement slurry including rubbing and polishing etc. complete. (MATCH TO FLOORING)

Providing and laying Anti Skid Colour ceramic tiles 30 cm x 30 cm, 6 mm. thick of

Somani, Kajaria, Bell or equivalent brand in flooring treads of steps and landings laid on

60 a Bed of 12 mm. Thick cement mortar 1:3 (1 cement : 3 coarse sand) finished with flush 30.00 1121.10 Sqm

pointing in cement Color & shade of which shall be as approved by this office

Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm /

mm x 450 mm x 8 mm in skirting, risers of steps and dedo on 10 mm. thick cement

plaster 1:3 (1 cement : 3 coarse sand) & jointed with white cement slurry.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and laying Mirror polished Machine polished Granite Stone slab 18 mm

(Average) thick for Doors / Windows sill & Jams Cladding as per design incl. Half round

moulded both edges fixed on 12 mm thick cement plaster 1:3 (1 -cement : 3 coarse

sand ) jointed with grey cement slurry including rubbing and polishing etc. complete

with necessary G.I. Fasteners for Long side in top. Colour and Finish as directed

Providing and laying water proofing treatment with china mosaic tiles flooring over avg

40 mm C.C. 1:2:4 {1 Cement : 2 sand : 4 Kapachi / Grit 6 to 12 mm size} bedding for

maintaining slope for plain and curve surface & 12 mm to 20 mm of broken piece of

ceramic / glazed tiles ( one for more colour as directed ) to be laid over cement mortar

bedding of C M 1:3 (1 cement : 3 sand ) contain one Kg of water proofing materials per

63 bag of O P C at plain or / and slops and to be tempered to bring mortar ceramic up to 257.00 1070.32 Sqm

surface with using white cement and colour pigment including rounding of junctions

and extending them up to 15 Cm along the wall and curing with bends any patterns or

design as per drawing and cleaning by using oxalic acid etc complete.

Providing sandwich type granite 18 mm thick cooking platform of 60 cm width and

cm height including 25 mm thick polish kota stone at bottom of granite and bottom

flooring using 20 mm thick C.M.1:6 including vertical and bottom polish kota stone for

64 kitchen sink, granite panipatti and vertical support for granite,all labour and material 4.00 5663.07 Sqm

half round moulding etc.complete as per design excluding cost of kitchen sink and

vertical,horizontel support and shelves for storage.

Providing and fixing both side polished machine cut KOTA STONE shelve/ partition

20mm to 25mm thick embaded in to wall at support including racking and finishing

65 smooth the surface including cutting the stone as and where required etc. complete 6.00 708.01 Sqm

including rounding of exposed edges etc. complete.

Providing and fixing Wash basin Platform of 19 mm thick Black toughened Glass

including making hole in glass and fixing with necessary stainless steel accessories etc.

complete as directed by engineer in charge / as per detailed drawing.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and fixing stainless steel railing (modular type) having hand rail 90cm height

and of 50mm dia and baluster 32mm dia at 90cm C/C and 5 horizontal pipe of 19mm

67 dia. At required spacing as per design and SS having 304 grade and 18 gauge pipe 7.00 3123.93 Rmt

including fastening, hold fast, clumps coach bolts etc. comp.

Providng and applying two coats of acrylic lappy (putty) and two coats of primer & Wall

painting ( two coats) with plastic emulsion paint of approved brand and manufacture on

68 wall surfaces to give an even brushing the surface free from mortar droppings and other 624.00 123.44 Sqm

foreign matter and sand papered smooth

Providng and applying two coats of acrylic lappy (putty) and two coats of primer & Wall

painting & Celling And sloping roofs ( Two coats) with plastic emulsion paint of

69 approved brand and manufacture on ceiling and sloping roofs to give an even brushing 326.00 128.96 Sqm

the surface free from mortar droppings and other foreign matter and sand papered

Finishing wall with weather proof exterior emulsion paint Shall be of Weather Coat

Smooth Paint on wall surface (two coats) On One Coat Of Primer Shall be of Weather

70 Coat Exterior Primer to give an required shape even shade after thoroughly brushing the 732.00 165.64 Sqm

surface to remove all dirt, and remains of loose powdered materials. etc complete.

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings make as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings make as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent

as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of

74 clamp at every two metre C/C or shall be concelled as directed including necessary 20.00 195.66 Rmt

fittings etc. including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making good the wall, ceiling and floor

etc. complete.[A] 15 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making good the wall, ceiling and floor

etc. complete. [C] 25 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making good the wall, ceiling and floor

etc. complete. [E] 40mm.

Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes (Medium

78 grade) of the following nominal bore, tube fitting and clamps including making good the 10.00 252.48 Rmt

wall ceiling and floor.(A) 15mm

Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes (Medium

79 grade) of the following nominal bore, tube fitting and clamps including making good the 25.00 401.94 Rmt

wall ceiling and floor.(C) 25mm

Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes (Medium

80 grade) of the following nominal bore, tube fitting and clamps including making good the 20.00 608.35 Rmt

wall ceiling and floor.(E) 40mm

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and fixing Gun metal check or non-return fullway wheel valve.(C) 25mm dia.

Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm dia.

Providing and fixing M.S.clamp made from 40mm x 6mm thick M.S.flat as per

83 design given by Engineer in charge for fixing the C.I. / G.I. / PVC pipe on wall of duct to 150.00 141.40 Each

stay away from wall etc.complete.

Providing and fixing to wall ceiling floor 10.0 Kg. F/Cm2 working pressure polythene

pipes approved brand for soil waste and ventilating pipes of the following outside dia.

low density, complete with necessary fittings ,wall clamps etc including making good

the wall ceiling and floor. (F) 75 mm

Providing and fixing to wall ceiling floor 10.0 Kg. F/Cm2 working pressure polythene

pipes approved brand for soil waste and ventilating pipes of the following outside dia.

low density, complete with necessary fittings ,wall clamps etc including making good

the wall ceiling and floor. (E) 50 mm

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed

86 on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm 60.00 876.90 Rmt

heigh at every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement including cost of all materials.

Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed

87 on wall using of PVC clamp of the size 160 mm diametre x 210 mm length x 196 mm 30.00 834.38 Rmt

heigh at every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement including cost of all materials.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and fixing Bib Cock or bath spout Approved Make or Model with including All

accessory Complete As Directed By EIC

Providing and fixing Pillar Cock Cock or bath spout Approved Make or Model with

including All accessory Complete As Directed By EIC

Providing and fixing Rain Shower (Over Head) with Rubit cleaning system 200 MM dia

90 Round shape and Shower Arm with Flange-Round of including All accessory Complete 5.00 4221.80 Each

As Directed By EIC

Providing and fixing Wall Mixer with L Bend Pipe for Overhead Shower (Turbo Flow)

91 Approved Make or Model with including All accessory Complete As Directed By EIC 4.00 7054.85 Each

Providing and fixing Towel rack SS 304 Rack 600 mm (24”) Make or Model with

including All accessory Complete As Directed By EIC

Providing and fixing Toilet Paper Roll Holder with Flap of Aproved Brand as directed by

93 Engineer in charge including fixing as and where directed etc. complete. 4.00 1472.58 Each

Providing and fixing Soap Dish Holder of Aproved Brand as directed by Engineerin

charge including fixing as and where directed etc. complete.

Providing and fixing Art Street Frameless Wall Mirrors for Bathroom, Bevelled Frameless

Wall Mirror (700 x 500 mm, Silver) 5 mm thick glass mirror with double coat and

longevity,grounded edges and silver plating on etc complete.

Providing and fixing Concealed stop cock with adjustable wall flange Approved Make or

96 Model with including All accessory Complete As Directed By EIC 17.00 1755.38 Each

Providing and fixing wash basin of approved make with bottle trap with union and wall

discharge pipe with flanges and cap of approved make, 32mm dia GI waste pipe with

97 fittings up to floor trap, 32mm dia waste coupline with CP chain and rubber plug, 15mm 4.00 9773.77 Each

dia consealed stop valve of approved make 15mm heavily quality flexible PVC inlet

Providing and fixing Table Top wash basin of approved make with bottle trap with

union and wall discharge pipe with flanges and cap of approved make, 32mm dia GI

98 waste pipe with fittings up to floor trap, 32mm dia waste coupline with CP chain and 1.00 11841.24 Each

rubber plug, 15mm dia consealed stop valve of approved make 15mm heavily quality

flexible PVC inlet

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white including

99 cutting holes in walls and making good the same but excluding fittings. (C) Vitreous 1.00 2326.65 Each

China Sink.(i) 600mm x 450mm x 150mm size

Providing and fixing Wall Mounted Water Closet with integral "P" and "S" trap including

jointing the trap with soil pipe in cement mortar 1:1 (1-cement, 1-sand) of approved

brand including seat cover for wash down WC with CP brass hinges and rubber buffers

including providing 12.50 Litres low level flushing cisten with a "P" pair of CI or MS

bracket with complete fitting such as lead valve Sipron 15mm dia brass ball valve with

polythene floa

Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm with

100mm size P or S trap, foot rest and including jointing the trap with the pan and soil

pipe in cement Mortar 1:1 (1-Cement : 1- Fine sand) (A) Vitreous China.(I) Long pattern

= White colour

Providing and fixing C.P. Brass health faucet with rubbit cleaning system 1.00 mt. long

102 P.V.C. Flexible tubes and ABS wall hook with angular stop cock with extension nipple 5.00 2137.16 Each

62mmlong etc. complete.

Providing and laying Both side mirror polished Black Granite stone slab 18 mm

(Average) thick of approved quality incl. full moulded round front edge fixed in wall for

partition and jointed with grey cement slurry including rubbing and polishing etc.

Providing erecting and fixing double coated PVC. (ISI) mark water tank of reqd capacity

104 each with all necessary fittings & connection etc. complete on terrace. 3000.00 3.94 Lit

Providing and fixing S.W. Gully trap with C.I. Grating brick masonary chamber and

water tight C.I. Cover with frame of 300 mm. X 300 size (inside) with standard weight (I)

Square mouth traps (B) 150 mm. X 100 mm size p or R type

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali

of the following nominal diameter of self cleansing design with C.I scread down or

hinged grating including the cost of cutting and making good the walls.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Constructing brick masonary chamber for under ground C.I. Inspection chamber

and bends with bricks having crushing strength not less than 35 Kg/cm2 in cm. 1:5

C.I. Cover with frame (light duty) 455 mm. X 610 mm. Internal dimensions, total weight

of cover with frame to be not less than 38 Kgs. weight of cover 23 Kg. and wt. of

frame 15 Kg) R.C.C. top slab with 1:2:4 mix(1 cement : 2 coarse sand : 4 graded

stone aggregate 20 mm. size ) foundation concrete 1:5:10 inside plaster 15 mm.

thick with cement mortar 1:3 finished smooth with a floating coat of neat cement

on walls & bed concrete etc. complete. (I) inside dimensions, 455 mm. x 610 mm. And

450 mm. Deep for single pipe line.

Constructing brick masonary chamber for under ground C.I. Inspection chamber

and bends with bricks having crushing strength not less than 35 Kg/cm2 in cm. 1:5

C.I. Cover with frame (light duty) 455 mm. X 610 mm. Internal dimensions, total weight

of cover with frame to be not less than 38 Kgs. weight of cover 23 Kg. and wt. of

frame 15 Kg) R.C.C. top slab with 1:2:4 mix(1 cement : 2 coarse sand : 4 graded

stone aggregate 20 mm. size ) foundation concrete 1:5:10 inside plaster 15 mm.

thick with cement mortar 1:3 finished smooth with a floating coat of neat cement

on walls & bed concrete etc. complete. (iI) inside dimensions, 500 mm. x 700 mm. And

450 mm. Deep for with one or two inlet.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-

graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement :

3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement

Mortar 1:5 (1-Cement : 5-coarse sand) finished with a floating coat of neat

cement and making channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse

sand :4-stone aggregate 20mm nominal size) finished smooth complete including

109 curing and finishing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. 4.00 11042.74 Each

cover with frame size 560mm diameter total weight of cover and frame to be not less

than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls

of brick masonry using brick having crushing strength not less than 35Kg. /

Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (1) A type depth

Metre for 150mm diameter sewer.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing laying (to level or slopes) and jointing reinforced concrete light duty,

non-pressure pipes I.S. class NP-2 of the followings internal diameter with collars

and butt ends prepared for collar joints including testing of joints complete. (D)

111 Providing and fixing in position cowel went to pipes.(B) 75mm dia. 5.00 393.04 Each

Providing and fixing PVC Cowl vent of following dia etc complete as directed (B) 100 mm

Providing and fixing C.I. Manhole cover 0.60m x 0.45m size having weight not less

than 35 kgs.

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block

30cm length,30cm height and 15cm thick of M250 grade concret as per approved

114 design and including excavation for fixing in proper line and level,filling the joint with 101.00 374.92 Rmt

C:M 1:3 (1cement:3fine sand) etc complete.

Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse sand : 8- hand broken

115 stone aggregates 40 mm nominal size) and curing complete excluding cost of formwork 29.00 2769.69 Cum

in (A) Foundation and Plinth.

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm

thick with grade of concrete M300 pnumatic compressed / vibrated mechanically and as

116 per approved design Confirming toIS 15658 : 2006 including 35 mm Sand layer for 256.00 706.92 Sqm

levelling and filling the joint with sand in proper line and level as per guidlines of IRC : SP

63-2018 etc. Complete.

Providing and laying Parking Colour ceramic tiles 30 cm x 30 cm, 10 mm. thick of

Somani, Kajaria, Bell or equivalent brand in flooring treads of steps and landings laid on

117 a Bed of 12 mm. Thick cement mortar 1:3 (1 cement : 3 coarse sand) finished with flush 60.00 1175.64 Sqm

pointing in cement Color & shade of which shall be as approved by this office

Providing corrugated PPGL(Pre-Painted Galvalume) Sheets roofing fixed with Galvanized

iron 'J' or 'L' hooks bolts and nuts 8 m. diameter with bitumen and G.I.Limpet washers

118 filled with white lead complete including ridges, gutters etc. excluding the cost of 38.00 1136.25 Sqm

purlins, rafters and trusses. (1) 0.60 mm. Thick Corrugated sheet

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing Tree Plants having minimum 1.00 mt height and healthy growth of various

kinds as like Peltoform , Gulmahore , Karanj , Ambla ,Rain tree , Saptparni , Cherry

Cryjeliya , Spethodiya,, Paras Pipala, Garmalo , Neem , Borsalli, Kadam ,Buch, Chanpo

(Different types of tree who deside by Architect engineer) Cost including with all kinds

of transportation, bamboo and woodan supports with Black cotton Soil and Labour

Providing Tree Plants having minimum 3.00 to 5.00 mt height and healthy growth of

various kinds as like Trothic Areca plam, Coconut Lagoon Rare, (Different types of tree

120 who deside by Architect engineer) Cost including with all kinds of transportation, 16.00 3535.00 Nos

bamboo and woodan supports with Black cotton Soil and Labour work.

Plantation of trees in soil incl digging pits, preparing soil , providing and mixing organic

fertiliser , watering , planting and filling the pits as per direction including etc complete

121 (Different types of tree who deside by Architect engineer) Cost including with all kinds 76.00 151.50 Nos

of transportation, Black cotton Soil and Labour.(MR)

Providing And Fixing CO2 Type portable fire extinguisher as Per I.S Code 2878:2004 (A)

Providing And Fixing Dry Powder Type(Stored Pressure) portable fire extinguisher as Per

I.S Code 13849:1993 (A) 6 Kg.

Total =

I / Weam / are willing to carryout the work at………………………. % above/ below percent (Should Be written in figures and words)

of the estimated rate mentioned above Amount of my / our tender works out as under

(*Please strike out whichever is not applicable).

*Estimatedamount put to tender *Estimatedamount put to tender

Deduct…….……% below Add……..…% Above

Net……………………….. Net……………………………

In words………………….. In words………………………..

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Note 1:- The Contractor shall exhibition board with detailed specification and details of work as directed by the Engineer – In – Charge for which no extra

payment shall bemade

Note 2:- The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

Note 3:- GST and Income tax TDS will be deducted at a source while making payments of bills.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Note 4:- In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt G.R.: PRC-10/2017 Cement Consumption/16/C

Date: 11/05/2017 as stated in S.O.R. therefore in R.C.C. items where the reisa change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Signature of Bidder Deputy Executive Engineer Executive Engineer

Dist. R & B. Sub Division R&B Division

Junagadh Junagadh