Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.8 LAccepted-AOC | L1 | Accepted-AOC QUOTED AMPOUNT IS LOWEST AND RESONABLE | |
| 2 | L2₹21.9 L−₹97,805 (4.28%)Rejected-Finance 21 KISHORE BHAWAN MALVIYA NAGAR AIR FORCE JODHPUR RAJ 342011 | JODHPUR | JODHPUR | RAJASTHAN | 342011 | L2 | Rejected-Finance QUOTED AMOUNT IS NOT LOWEST AND NOT RESONABLE | |
| 3 | L3₹22.0 L−₹81,645.88 (3.58%)Rejected-Finance Q 49 NEAR DEOGHAR COLLEGE MAIN GATE PO PS DEOGHAR JH 814112 | DEOGHAR | DEOGHAR | JHARKHAND | 814112 | L3 | Rejected-Finance QUOTED AMOUNT IS NOT LOWEST AND NOT RESONABLE | |
| 4 | L4₹22.5 L−₹38,495.90 (1.69%)Rejected-Finance | L4 | Rejected-Finance QUOTED AMOUNT IS NOT LOWEST AND NOT RESONABLE | |
| 5 | L5₹22.8 L−₹6,764.10 (0.30%)Rejected-Finance 02 PADRI SHIV NAGAR SHIV NAGAR MAHARAJGANJ UTTAR PRADESH 273303 | MAHARAJGANJ | UTTAR PRADESH | 273303 | L5 | Rejected-Finance QUOTED AMOUNT IS NOT LOWEST AND NOT RESONABLE |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
27 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER
GE RAMGARH CANTT
REPAIR AND REPLACEMENT OF JOINERY AND CONNECTED ITEMS AT SRC, MH, SHO, ASC,MDC STORE AREA AT RAMGARH CANTT
2024_MES_672601_1
8300/3285/E8
Open Tender
Civil Works
Item Rate
180 days
RAMGARH CANTT
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE RAMGARH CANTT
₹40,000
Yes
3 Dec 2024
6 Sept 2024
3 Oct 2024
6 Sept 2024
27 Sept 2024
20 Sept 2024
Amount
Taking down chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) etc including builders hardware etc & making good disturbed surface of wall with CM 1:3 complete all as specified and directed
Taking down chowkats or frames with shutters exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from the frames) including builders hardware etc & making good disturbed surface of wall with CM 1:3 complete all as specified and directed
Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.0 Sq m each and removing from site, complete all as specified and directed by Engr-in-Charge .
S & F 35mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with sash bars) edges of framing plain chamfered or rounded fitted with cat and mitred beads for securing glass etc fitted to chowkats for windows, ventilators,etc complete, size of member of shutter as specified in SSR Part -I, Sec 8, clause 8.20 (b) complete all as specified and directed
S & F 35 mm thick factory made, IInd class hard wood plain framed panelled door shutter (three panel) with lock rail and panel of 12 mm thick BWP commercial ply .The size of rail and stile as per IS : 1003 (part-I) kiln seasoned and chemically pressure treated complete all as specified and directed .
S&F for 1.25 mm thick pressed steel frames of size 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including plain cement concrete 1:3:6, type C-0 (using 12.5 mm graded crushed stone aggregate) as in filling in pressed steel door complete all as specified and directed. Note: The quoted unit rate under this item shall deemed to be included one shop coat of primer.
M&L plain cement concrete 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) in for inserting hold fast of doors & window , bed blocks,fillings & similar work etc. including necessary form work complete all as specified and directed.
Forming jambs, etc., in CM 1:4 to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified & directed .
M&L for hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165 complete all as specified and as directed.
S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tubes suppyling & fixing in opening as per specification & drawing complete all as spcefied and directed by Engineer-in-Charge.
S & F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. mild steel framed shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail &bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS framed welded/sealed to stiles & rails with suitable PVC sheet beading & joined together with solvent cement complete all as fixing in the frame at site as per specification and drawing including 3 Nos stainless steel butt hinges 100 mm long for each door, complete all as specified and as directed.
S & F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed complete all as specified & directed.
S & F Aluminium anodised handles of extruded section and fixed 150 mm long complete all as specified & directed.
S & F Aluminium anodised barrel tower bolts of extruded section and fixed 150 mm long complete all as specified & directed.
S&F steel window with side hung shutters including box type hinges with steel handles and steel peg stay complete with glazing bars, dovetailed or welded with four Nos mild steel flat iron 25 mm X 3mm ,200 mm length (appx) & two Nos mild steel tower bolt 150 mm long and one peg stay on each leaf complete all as specified and directed
S&F steel window with side hung shutters including box type hinges with steel handles and steel peg stay complete without glazing bars, dovetailed or welded with four Nos mild steel flat iron 25 mm X 3mm ,200 mm length (appx)& two Nos mild steel tower bolt 150 mm long and one peg stay on each leaf complete all as specified and directed
S & F for steel windows or ventilators, fixed type, with glazing bars complete including prepartion of new or previously untreated steel surface of any description , not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified & directed.
S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified & directed.
Hacking out old boken glass(any thickness, size, quality or description) from wooden frames/steel frames, glazed with oil putty or fixed with beads complete all as specified and directed
M & L for 3mm thick plain sheet glass ordinary quality and glazing with oil putty not exceeding 0.50 Sqm in each pane,complete all as specified and as directed by Engineer-in-Charge .
S&F 3.0 mm thick frosted glass pin headed type in squares/ rectangular not exceeding 0.5 Sqm in each pane glazing with oil putty or aluminium frame/shutters with rubber neoprene beading complete all as specified & directed.
M & L for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for prepartion of new or previously untreated steel surface of any description , not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.
S & F 150 mm (overall length of cover plate) floor door stopper with rubber shoes aluminium alloy body and tongue, anodised ,with hard drawn steel spring,fixed in floor complete all as specified and directed.
S&F mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.
S&F in repair mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.
S&F for snack guard of size 35mm x 5mm thick fixed with door shutter with nails/screw complete all as specified and directed.
S & F in repair 19mm/20 mm dia curtains rod of PVC coated fancy type with fixing brackets,stops, rollers etc.,complete all as specified and as directed by Engineer-in-Charge. Note: Running length of curtain rod shall be measured & paid only.
S & F in repair fancy type bracket for curtain rod, suitable for 20 mm dia curtain rod of any approved colour and design complete all as specified and as directed by Engineer-in-Charge.
S&F in repair 20 mm dia Harrison rails, anodised aluminium alloy with bracket etc., complete all as specified and as directed by Engr-in-Charge.
S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.
S&F in repair towel rail brass chromium plated towel rail , 20 mm dia ,D-type 600 mm long between flanges fixed with and including chromium plated brass screw & wooden /plastic cleats complete set all as specified and directed.
S & F in repair stainless steel kitchen sinks with drainage board made of stainless steel 1.00 mm thick sheet with plugs, washers & waste coupling and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm X 460 mm bowl size 410 mm X 352 mm X 178 mm including 40 mm bore PVC flexible waste/flush pipe 800mm long with socket fixed with sink brass waste coupling complete all as specified and directed.
S&F mild steel cupboard shutter with frame, Godrej pattern made out 22 gauge mild steel sheet including chromium pated mild steel handle with proper looking arrangement (brass mortice lock, verticale type size 65mm, 4 liver with escutcheon plates & two key) with and including two coats of spray painting with synthetic enamel paint of approved tint over a coat of red oxide primer including fixing with 12mm dia bolts 150mm long ( 06 Nos) grought in brick wall/concrete including making good the distrubed surface complete all as specified and directed by Engr-in-Charge
M&L for 18 mm to 20 mm thick machine cut granite slab (or any type) table rubbed and pre mirror polished in steps,jambs, pillar,window cill,cooking platforms and like in cement mortar 1:4, set & jointed in neat cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite ,over & including 15 mm thick screed bed in cement mortar(1:4) including rounding of slab & demolition of existing old slab where directed complete complete all as specifed and as directed.
Taking down shutters of any description not exceeding 1.0 Sq m each, and removing from site, complete all as specified and directed by Engr-in-Charge .
Running welding in repairs thickness of metal to be welded exceeding 6mm but not exceeding 9mm include for cleaning and preparing the surfaces to be welded together, holding the members in true position while welding and bevelling of edges, complete all as directed by Engr-in-Charge.
Refixing of shutter of any description exceeding not exceeding 1.0 Sq m in same opening after repar including suitable size hinge, if necessry for shutters complete all as specified and as directed.
S& F wooden beads of size 10x10 mm to 15X15mm of Ist class hard wood Square / triangular in cross section, plain or desiger for fixing of mosquito net jali or glazed/gauged joinery including taking down/ removing old beads complete all as directed by Engineer in Charge.
S&F in repair 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination for cupboard shutter, shelf, etc , fixed with screws & favicol complete all as specified and directed.
S&F in repair 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination for cupboard shutter, shelf, etc fixed with screws & favicol including making holes with decorative covers for wires where ever required fixed complete all as specified and directed.
S &F aluminium work for doors, windows, ventilators shutters(fixed/ sliding track two or three track) and partitions frames with extruded built up standard sections of approved make fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions with sealent with wall, i.e. at top, bottom and sides including cleat angle, C.P. brass/ stainless steel screws, all complete all as specified and directed.
S&F anodised aluminium doors, windows, ventilators shutters ,aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips rubber packing anodised aluminium,snap beading screws, powder coated aluminium fittings such as peg stays 150mm long (1No.),100mm long hinges type B-21 (2Nos), suitable handle(02 Nos.) in each door top rail guide rail etc. complete all as specified and directed.
S & F for anodised aluminium window , ventilator shutters,and partitions fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified
M&L double action floor spring hydaulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in floor including cutting of floor for fixing of machine and making good to floor in affected area for aluminium doors complete all specified and directed.
S & F in repair for aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete etc all as specified & directed.
M&L 9mm thick Prelaminated particle board,interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with alumunium frame work complete all specified and directed.
S & F 4.0 mm thick sheet glass area exceeding 0.5 Sqm in each pane of superior quality fixed to aluminium frame work with rubber neoprene beading including solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified & directed.
S & F 4.0 mm thick sheet glass area not exceeding 0.5 Sqm in each pane of superior quality fixed to aluminium frame work with rubber neoprene beading including solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified & directed.
S&F of brass mortice lock, vertical type, size 65 mm long four levers (ISI marked) complete all as specified and directed.
S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed by Engineer -in-Charge.
Taking down aluminium doors shutters only (area exceeding 1.0 sqm but not exceeding 2.0 sqm each) and dismantling all members and re-assembling the same with and including new screws, new rubber gasket, new aluminium beads & cleats of existing make and also refixing the handles & mortice locks in existing position with and including new screws including refixing the door shutters in same opening complete all as specified & directed.
M&L taking down old steel window projecting type by machanical cutter and fixed in same opening by providing box type hinges 02 Nos in each shutter, not exceeding 1.00 sqm and making good disturbed surface, fineshing to match with existing surface & panting to distrubed portion complete all as directed by Engr-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the all rubbish off from the premises complete all as specified and directed.
M & L glazed ceramic coloured tiles of size 375 mm x 250 mm x7mm/450 mm x 300 mm x7 mm thick ,in verticle surface such as dado/skirting etc ,set and jointed in neat cement slurry and pointed in colour cement to match the tiles over & including 10 mm thick rendering in cement plaster in CM (1:4) complete all as specified and directed.
ganpati enterprises (BID ID -3114542)
simplex infra project (BID ID -3107010)
upadhyay engineers and consultant (BID ID -3114411)
JP ENTERPRISES (BID ID -3112533)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .