Body and cabin repairs to Truck No. JK05C/6990, pertaining to Work Shop Sub Division Baramulla

Amount

Complete dismantling of cabin roof top by way of removing existing damaged/bent MS angle/wooden planks/GI sheets. The job includes p/f of new GI sheets of size 4'x8'x2 no. by way of cutting to size, MS angles of 35x35x5mm, ply sheet, hood and sunmica sheets. The job also includes denting, welding, pluging all leak points and riveting of sheets.

ISA 35X35X6mm

ISA 25X25X3mm

MS Channel 4"x2"

Sunmica 4'x8'x6mm

Ply wood 4'x8'4mm

Ply wood 4'x8'x12mm(ply to ply)

GR Sheet 1200x2400

Providing and fitting of Aluminium chequered plate (8'x4=5No for each truck) for outer surface of the cabin after removing of old damaged sheets.

Aluminium chequered sheet(900X2400X1mm)

Repairs to cabin front show by way of replacing damaged worn out wooden and MS angle supporting members by new ones and then fixing with GI sheeting and aluminium stripping (Gola) on both sides.

ISA 65X65X6mm

ISA 50X50X6mm

CR Sheet 1200x2400x1.25mm

Aluminium gola 2"(12')

Dismantling of cabin back, straightening of bent angles, bolting, welding to align properly. The job includes providing and fixing of new MS sheet 26 guage and then covering complete cabin back with plywood duly fixed with teak ply complete.

M.S Sheet 4'X8'

Ply wood 4'x8'x19mm (ply to ply)

Teak wood 4'x8'x6mm

Body repairs by way of stretching/straightening body sides of required alignment. The job includes denting, welding of damaged or bent angles and then providing fitting of new side angles in 50x50x6mm 10 feet long with nuts and bolts complete as per instruction of engineer in charge for firm alignment of body.

ISA 50X50X6mm

Nuts & bolts of sorts

P/F of side beading Alumunuim strips 2'x5'x2 no. after replacing worn out wooden planks and plywood sheets.

Aluminium strip

P/F of new door glass to the right side including rubber beading, nails, silicone adhesive, channel etc. complete

Door setting by way of replacing of worn out damaged wooden planks, plywood after denting and patching of door angles. The job also includes P/F of door Aluminium sheeting, riveting and door locks handle.

Ply wood 4'x8'x19mm (ply to ply)

MS Rivet 12x8mm

Door lock

Aluminium sheet 4'x8'x1.25mm

Repairs to front wind screen frame structure by way of removal /dismantling of old damaged main supporting members and fabrication with new taper frame structure fabricated out of MS angle 50x50x5mm and MS sheet.

ISA 50X50X6mm

M.S Sheet

Providing and fitting of MS square pipe for cabin protection of size 10 feet long and 50mm dia Stainless steel balls on top and front bumper duly welded and screwed.

MS Square pipe (2.5"x2.5")

Steel balls

Fabrication of driver stair case by way of p/f Ms angles 35x35x6mm complete as per directions of engineer incharge.

ISA 35X35X6mm

Dash board repairs by way of replacement of damaged wooden planks, ply wood, aluminuim strips, teak where ever required

Wooden planks 1.5"x6"x5'=5no

Aluminium strip 1"

Bonnet repairs by way of denting, patching and gas welding

Mud guard repairs front and rare by way of denting, patching and gas welding.

Repairs to chassis side by way of welding, patching, and p/f nuts, bolts and washer as required.

Providing and fitting of right side door glass and 02 No. side mirrors duly fitted with new rubber beading and adhesive.

Glass

Rubber lining

side mirror

Dalla repairs by way of denting, patching, welding and fitment of hooks.

Providing and fitting of front wind shield of size (33"x27") with rubber lining complete.

Wind shield

Rubber lining

PME CONSTRUCTIONS

YASIR RASOOL SHAH