REPAIR TO PLASTERING, FLOORING JOINERY, ROOF SHEET AND OTHER B/R WORKS IN TECH AREA AT AF STN AMBALA UNDER GE (AF) AMBALA

Amount

Dismantling of boarding including fillets of any description fixed in any position with nails/screws etc complete all as specified and directed.

S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixed at site on PVC frame as per specification and drg complete all as specified and direcrted.

S&F 5mm thick PVC sheet fillets of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame etc complete all as specified and direcrted.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets ) any thickness, including cover fillets, complete all as specified and directed.

S&F powder coated GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves at appx 900mm cenetre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 mtr length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre including hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified including 9 to 10mm thick ceiling tiles/board for insulation and accoustic purpose of size 600 x 600mm decorative type with silver foil coating on back side complete all as specified and directed. Make : Saint Gobain/Armstrong/Gysboard/Hilux/Kingston for insulation and accoustic purpose fixed with staples with on snap grid and 4mm dia GI wire with nuts, bolts, adjustable arrangement and washers etc complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern from roof covering complete all as specified and directed.

S&F pre painted galvalume zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws as specified complete all as specified and as directed.

Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.

M&L for rolled sections as in main and cross beams, hip rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed witjh angle cleats or other connecting plates Fe 410 W (gde E 250 ) quality A including a shop coat of zink chromate primer complete all as specified and as directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the premises as directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) jointless area of each tile exc 0.06 but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed with white or colour cement to match the surface.over screed bed or bedding layer 15mm thick in cement mortar 1:6 complete all as specified and directed.

M&L for coloured glazed designer ceramic tiles 300 x 450 x 7 to 8mm thick on vertical surface as in dado/skirting and jointed in neat cement slurry and pointed with white/colour cement to match with the surface over 15mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick in light/dark shade (square/rectangular) area of each tile not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed with white or colour cement to match the surface.over screed bed or bedding layer 15mm thick in cement mortar 1:6 complete all as specified and directed.

All as per BOQ srl item No 13.00 here-in-above but as in skirting including 10mm thick in CM 1:4 rendering as in backing coat complete all as specified and directed.

Demolition of PCC in ground floor and pavings not exceeding 15 cm thick below or above ground level complete all as specified and directed.

M & L for 100mm thick PCC 1 :4 :8 type D-2 ( using 40mm graded mechanically crushed stone aggregate ) as in sub base of floors complete all as specified and directed.

M&L for 75 mm thick cement concrete type C-2, 1:3:6 ( using 20 mm graded mechanically crushed stone aggregate) as in plinth protection/path laid in bays incl finishing the concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for PCC (1 : 2 : 4) type B0 (using 12.5mm graded mechanically crushed stone aggregate) as in roof kerbs, mud stop, benching, coping padding and the like complete all as specified and directed.

M&L for chequered cement concrete pre polished colour tiles 20cmx20cmx25mm thick set and jointed in neat cement slurry in floor using grey cement with pigment including 20 mm thick screed bed in CM 1:6 complete all as specified and as directed

M&L prepolished 60 mm thick rubber moulded double glossy coloured designer interlocking tiles made of M-35 design mix concrete, laying over 50 mm thick sand cushioning, with the crushing strength not less than 250 Kg/Sqcm of approved design and shape, complete all as specified and directed

Dismantling of stone slabs and tiles of any description or thickness laid dry or laid dry and pointed in any mortar in floors, aprons etc complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over 20mm screed bed in CM 1 : 4 jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and granite polishing etc complete all as directed.

All as per BOQ srl Item No. 22.00 here-in- above but on vertical surface such as dado, skirting etc over 10 mm thick screed in CM 1:4, complete all as specified and directed.

M&L for 20mm thick granite stone slab as in shelves over cooking platform, machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over 20mm thick screed bed in CM 1 : 6 etc complete all as specified and directed.

All as per BOQ srl Item 24.00 here-in- above but on vertical surface such as dado, skirting etc over 10 mm thick screed in CM 1:4, complete all as specified and directed.

Demolition of brick work built in cement mortar complete all as specified and as directed

M&L for brick work with sub class 'B' brick (old size) straight or curved on plan exceeding 6m mean radius in CM (1:6) complete all as specified and directed.

Taking down cement plaster on brick wall including racking out joints,soffits of slabs/chajja/sunshaded hacking for keys, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on fair face of brick walls or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified.

M&L for rendering 15mm thick on fair face of brick walls or concrete surfaces in CM 1:4 mixed with WPC @ of 3% by wt of cement finished even and smooth without using extra cement complete all as specified.

Supply only Dr fixit integral WPC /liquid complete all as specified and directed.

M&L for rough cast plaster including 15mm thick rendering in CM 1:3 on brick wall or concrete concrete surfaces complete all as specified in SSR Part - I clause 14.22 complete all as specified and directed. Note : Rough cast finish to be as below :- After applying the under coat of cement mortar 1:3 and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg (which is generally of size between 6 to 12mm depending on the texture required ) mixed with coarse sand and cement in the ratio of 1 : 1 : 1 shall be applied and finished even. The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger agg are thoroughly covered.

M&L for preparing newly plastered surface of walls and applying two coats of exterior acrylic paint (water based) over a coat of primer in camouflaging pattern of any shade and pattern complete all as specified and directed.

M&L for complete removal of existing treatment from plastered or unplastered surface of walls and applying two coat of oil bound distemper emulsion over a coat of primer complete all as specified and as directed by Engineer-in-Charge

M&L for existing treatment from plastered or unplastered surface of walls and applying one coat of of oil bound distemper emulsion complete all as specified and as directed by Engineer-in-Charge

Dismantling old unserviceable RCC/PVC water tank of capacity exceeding 250 but not exceeding 500 ltrs cpacity including supply and fixing PVC water storage tank of 500 ltrs capacity HDPE double layered , cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20mm GI pipe connection including locking arrangement with ball valves high pressure with epoxy coated aluminium rod and high density plastic ball fixed as in repairs complete all as specified and directed.

Dismantling old unserviceable RCC/PVC water tank of capacity exceeding 500 but not exceeding 1000 ltrs cpacity including supply and fixing PVC water storage tank of 1000 ltrs capacity HDPE double layered , cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20mm GI pipe connection including locking arrangement with ball valves high pressure with epoxy coated aluminium rod and high density plastic ball fixed as in repairs complete all as specified and directed.

Supply and fixing in repairs CONCEALED stop cock of 15mm bore reduced body etc complete all as specified and directed.

Supply and fixing in repairs angular stop cock of long thread 15mm bore complete all as specified and directed.

Supply and fixing in repairs 15mm bore brass chromium plated fancy type central hole basin mixer w/o pop up waste system with 450mm long braided hoses etc complete of Complete all as specified and directed.

Supply and fixing in repairs, 15 mm bore pillar taps, fancy type Swan neck, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

Supply and fixing in repairs, 15 mm bore Bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fixing in repairs, brass chromium plated fancy type towel ring square fixed etc complete all as specified and directed.

Supply and fixing in repairs, vitreous china urinal , half stall type white with gratings, union for discharge pipe , flush pipe and waste pipe , CP urinal spreader fixed to water supply pipe etc complete all as specified and directed.

Supply and fixing in repairs, vitreous china urinal partition ,white of size 310 x 700mm etc complete all as specified and directed.

Supply and fixing in repairs coloured oval type wash hand basin, size 550x400 mm, wliile, flat back, iron (for Hospital use) excluding taps, waste, chain and plug and porcelain stopper but including brackets waste pipe 32mm, coupling etc fixed as in counter slab etc complete all as specified and directed .

Supply and fixing in repair Cast copper alloy, chromium plated soap dish, complete all as specified and directed.

Supply and fixing in repair looking mirror of size 1500 x 600mm, 5.5 mm thick duly surrounded by teak wood beading and 6mm thick back ply fixed with suitable arrangement etc complete all as directed.

Supply and fixing in repair CP grating of size 125mm complete all as specified and directed.

Supply and fixing in repair vitreous china wash down water closet pedestal pattern white excluding fixing bolts , flushing cistern and flush pipe complete but including PVC seat cover with aluminium hinges devices & EWC jet chromium plated with 1.00 mtr long PVC connection pipe complete all as specified and directed.

Supply and fixing in repairs, vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc including all accessories reqd complete all as specified and directed.

Supply and fixing in repairs, PVC valveless, syphonic action type, flushing cistern (ISI marked) of 10 litres capacity, low level (white) with inlet, ball valve, float and handle including bracket and flush pipe complete all as specified and directed.

Supply and fixing in repairs PVC connection 60cm long with brass check nuts on both sides suitable for 15mm bore pipe etc complete all as specified and directed.

S&F in repair aluminium alloy door closer hydraulically regulated , designation No 2 universal type, suitable for door shutter of 701 to 850mm in width and wt between 36 to 60 Kg and fixed to door frame complete all as specified and directed. .

Taking down existing fencing wire mesh of any description complete all as specified and directed.

Supply and fixing chain link MS galvanised fencing of any size or type including line wires, any mesh, any size and type of standards, rails, straining bolt etc including provision of binding wire etc complete all as specified and directed.

Supply and fix mild steel screw bolt with hexagonal or square head at one end and screwed at the other end with washer & one hexagonal nut not exceeding 5 cm long & 5 to 10mm dia complete all as specified and directed.

M&L for mild steel round bars 10mm dia and above as supporting horizontal bars in chain link fencing, including binding and bonding complete all as specified and directed.

Dismantling posts or struts of steel or RCC any section including taking out embedded portion from concrete or masonry and making good disturbed ground complete all as specified and directed.

Supply and fixing in angles iron post & struts in fencing including cutting top to shape as directed, drilling holes, notching for wire including all necessary drilling bolts or rivetting & similar work confirming to Fe- 410-0 or Fe 310-0 and flat iron 40x4mm fillets (for securing chain link fencing etc) complete all as specified and directed.

Excavation in post holes each not exceeding 0.5 cum getting out, returning, filling in and removing earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exceeding 50m in soft/loose soil and making good surface as per existing surface complete all as specified and directed.

M&L for cement concrete 1:4:8 Type D-2 (using 40 mm graded mechanically crushed stone aggregates) as in foundation filling or mass concrete complete all as specified and directed.

S&F in repair galvanised , two strand , steel barbed wire 2.24mm dia barbed with 2mm dia bars at 75mm spacing and straining and fixing to any type of standard rail, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and directed. Note : - The work is to be carried out at any height of security wall etc. Necessary T&P, scaffolding, to carry out the above work is also deemed to be included in quoted rate.

M&L for preparing surfaces of new or previously untreated surfaces of steel or metal works and applying two coats of synthetic enamel paint over a coat of red oxide primer over 10cm in width or girth complete all as specified and directed.

M&L for PCC 1:2:4 type B1, (using 20mm graded mechanically crushed stone aggregates) as in coping & the like including weathering slightly rounded or chamfered angles & throating etc including necessary form work complete all as specified and directed.

M&L for plain cement concrete 1:3:6, type C-2, (using 40mm graded mechanically crushed stone aggregates) as in beds of surface channels & drains including smooth finish complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete including forms, moulds etc complete all as specified and directed..

Demolition of reinforced concrete of any description and in any postion not otherwise specifically provided for. complete all as specified and directed.

M&L for providing precast RCC 1:1.5:3 type A-1 (using 20mm graded mechanically crushed stone aggregate) as in cover slab for man holes, drains , soak well etc and similar articles etc, set in CM 1:4 with plain faces including chamfered weathering throating etc incl necessary form work complete all as specified and directed.

Supply and fix mild steel deformed bars or TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per BOQ srl item No 71.00 (here-in-above) but 6 to 8mm dia. complete all as specified and directed.

Dismantling of brick tiles or concrete tiles single layers on roof and rubbish off the premises to a distance not exceeding 500 mtr including stacking of serviceable brick tiles complete all as specified and as directed.

Demolition of mud phuska on roofs, any thickness including mud plastering,whether full thickness removed or only a part thereof and rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and as directed.

M&L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and as directed

Roughening surface of old concrete floor by picking sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry @ 3.0 Kg/Sqm complete all as specified and as directed

M&L for PCC 1:2:4 type B-0 (using 12.5mm graded mechanically crushed stone aggregates) as in padding on roof to maintain the required slope & finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for Hydraulically pressed Cement Concrete tiles plain size 250x250x19 mm laid over and including 15mm thick screed in CM 1:4 with WPC & pointed in CM 1:3 mixed with crude oil ( WPC as per manufacturer's instruction shall be deemed to be included in unit rate quoted) Note :- Water Profiing Treatment will be carried out through approved applicator.

M&L for APP polymeric water proofing treatement to roof, at any height, using membrane minimum 3 mm thick and weighting not less than 3.6 kg per sqm , black finish reinforced with non-woven polyster matt weighting not less than 150 gms per sqm with thermo fusible finish laid by force application after applying compatible bitumen primer at the rate of 0.40 Ltr per Sqm, torching over laps with a propane or butane gas torch with a over lap of 100 mm at the side on transverse direction and 150 mm at the ends on longitudinal direction and sealing including a tack coat of hot blown bitumen 85/25 @ 1.2 Kg per sqm below APP complete all as specified and as directed . Notes:- (i) The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing. (ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee (on account of any defect raised/noticed during a period of ten years) and shall be released after 10 years of completion of work. However contractor may deposit the FDR of same amount in favour of GE. If contractor fails to rectify the defect pointed out during this period , the defect shall be got rectified at contractor's risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. The contractor's quoted rates for this item shall deemed to be inclusive of this aspect.

power house batteries

Gupta Enterprises

M/S SHASTRI BUILDERS AND ENGINEERS