REPAIR TO JOINERIES, PLASTER, FLOORING, WALL TILING, PATH, CHAIN LINK FENCING AND HARDSTANDING AT CQA (SV) ALKAPURI, EME WKSP UNDER AGE B/R (EAST) AT GE DEHU ROAD

Amount

Demolition brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified

M&L for brick work with sub class 'B' brick in cement mortar 1:6, straight or curved on plan exc 6 m mean radius, complete all as specified

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar.

Demolition of concrete ( un reinforced ) in ground floors and paving n.exc 15 cm thk (below or above ground level) complete all as specified and directed.

M & L 75 mm thk Cement conc type C-2, 1:3:6 (40 mm gr agg) as in plinth protection finished even and fair complete all as specified and directed.

M & L PCC type D2 1:4:8 (40 mm Gr. Agg ) 75mm thick as in sub base complete all as specified.

M&L for laying machine pressed precast concrete interlocking reflective coloured (Glozy Finish) pavers block any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade over 30mm thick sand layer watering and ramming all as specified.

M& L Chequared Cement Concrete Tiles (Glozy Finish) 30 CM x 30 CM X 25 mm th set and jointed in cement slurry and pointed in neat grey cement & pigment in floors over screed bed 15 mm thk in cm 1:6 .complete all as specified.

Taking down cement or cement lime plaster on brick or stone walls , etc including raking out joints, hacking for key, scrubbing down with eater etc,complete all as specified.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces finished even and smooth in cement mortar 1:6, complete all as specified

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces finished even and smooth in cement mortar 1:4, complete all as specified

M&L for preparing new plastered surfaces & applying two coats of cement base paint on walls complete all as specified and Directed by Engr-in-Charge.

M&L for preparation of new surfaces plastered or unplastered new surfaces & applying two coats of oil emulsion distemper on walls complete all as specified and Directed by Engr-in-Charge.

M & L for Complete removal of existing treatment of surface finish on wall (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped with wall care putty (3 mm thick) and applying one coat of primer with two coat of oil bound distemper complete all as specified.

Complete removal of existing treatment from old decorated surfaces of wall ,preparation of surfaces,priming with alkali resistant priming paint and applying two coat of cement base paint complete all as specified & directed by Engineer-in-Charge.

M & L for Preparing old decorated plastered or unplastered surfaces of wall including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of oil bound distemper complete all as specified.

Material and labour for complete removal of existing treatment of plastered OR unplastered old decorated surface walls by brooming down and applying two coats of weather proof paint on external surfaces including a coat of acrylic based primer at any height of building / tower complete all as specified and as directed by Engineer-in-Charge.

M & L for Preparing old painted surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of tint approved by Engr-in-charge complete all as specified.

M & L for Preparing old painted steel & iron surfaces of any description over 10 cm in width or girth ,including roof and applying one coat of synthetic enamel paint of tint approved by Engr-in-charge complete all as specified.

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed no pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade complete all as specified.

M&L machine cut kota stone slab flooring 20-25mm thick over and including cement screed based 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting polishing and rubbing complete.

Material and labour for 20 mm thick granite stone machine cut (table rubbed and polished) bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including grinding and polishing, rounding to edges of granite stone etc.complete all as specified and directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding/plaster (but not backing) and removing rubbish off the premises etc complete all as directed.

M&L for Non-skid coloured Ceramic tiles of size 300 x 300 x 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over and including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified.

M&L for vitrified coloured tiles 8 to 10 mm th (square/rectangular) polished area of each tile 0.30 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm th screed bed in CM 1:6 complete all as specified and directed.

All as per item No 26 above but on skirting over 8 to 10 mm th rendering in CM 1:4 complete all as specified and directed.

M&L for glazed coloured ceramic tiles 350 mm x 250mm/450mmx350x7 to 8 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement with & including backing coat 10mm thick in CM 1:4 complete all as specified and directed.

Taking up or down steel tubes and connections including cleaning for refixing or removal to stones bore of pipe 15mm.

All as per item No. 29 above but bore of pipe 20mm

M&L GI tubes, medium grade with all fittings and fixed complete to walls, ceiling or laid in floors, bore of pipe 15mm concealed complete all as specified and directed by Engr-in-Charge

All as per item No. 31 above but bore of pipe 20mm

Refixing old steel tubing and connections in new or old position (wall, ceiling, floor etc) 15mm bore concealed complete all as specified and directed by Engr-in-Charge

All as per item No. 33 above but bore of pipe 20 mm

M&L Supplying and laying of 16 mm OD CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches concealed complete all as specified

M&L Supplying and laying of 20 mm OD CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches concealed complete all as specified

S&F in repair stop valves fancy type cast copper alloy with capstan heads screwed down high pressure screwed both ends for iron pipe or union fixed for 15 mm dia GI pipe concealed complete all as specified and directed by Engr-in-Charge.

S&F in repairs bib taps cast copper alloy with capstan headsscrewed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe concealed complete all as specified .

S & F in repairs pillar taps fancy type ,chromium plated with capstan heads screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe complete all as specified

S&F in repair 15mm PTMT Bib tap standard of any colour screwed, for iron pipe and fixed concealed complete all as specified . (Make: Prayag/Shakti)

Supply only in repair Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed by Engineer-in-Charge

Supply only in repair 15 mm Brass CP Wall Mixer for mixing hot & cold water screwed down for iron pipe and fixed concealed complete all as specified

S & F in repairs Brass cromium plated with capstan headsshower rose of 125 mm dia complete all as specified.

S&F in repairs Grating round 140 mm size of PTMT (Minimum weight 50gms.)

Dismantling of PVC water tank of capacity exc 500 litre and n. exc 1000 litre and complete all as specified and directed.

Dismantling of PVC water tank of capacity exc 250 litre and n. exc 500 litre and complete all as specified and directed.

S&F rotational moulded Polythene (HDPE) double layer water tanks, cylindrical & vertical type 500 Litres capacity hoisted and fixed in position including provision of 20mm/15mm dia. spouts for connecting inlet, outlet, over flow and washout pipes.

All as per item No. 47 above but 1000 litres.

M&L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes exc 250 & n exc 500 ltr , etc. complete all as specified and as directed.

M&L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes exc 500 & n exc 1000 ltr , etc. complete all as specified and as directed.

Taking down chowkats or frames with shutters ( without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each and removing to store.

All as per item no 51, but n'exc 1.5 Sqm each.

Taking down shutter of any description exc. 1 sqm but not exc 2 Sqm each complete all as specified and directed.

Supply & Fixing PVC door frame (50x47) mm made out of plain colour 5 mm thich PVC Sheet reinforced with MS Square Tube, supplying & fixing in opening as per specification & drawing

S&F factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.

S/F 30mm thik flush shutter solid core construction with block board core and plywood face panels commercial type on both sides

S & F factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified.

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm.

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm.

Cutting holes in stone walls built in cement mortar for inserting hold fast/lugs & making good disturbed portion in CM 1:3 or cement congrete 1:2:4, type B-1 as required (Depth of embedded portion of hold fasts orings measured from the face of the jamb into wall exc half brick but no exc one brick.

Supply and fixing three track sliding window including frame with two shutters with 4mm thick tinted glass and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18 mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc; fabricated using following aluminium anodised sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engineer-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352. (Note:- Cost of Tinted glass & wire cloth shall be included in the quoted rate of the item).

Supply and fix in repair for aluminium powder coated partition using ‘Jindal’ aluminium SP/ DP section or equivalent make as specified with 5mm thick tinted glass, PVC rubber beading,12mm thick prelaminated particle board fixed with glazing clips etc complete all as specified and as directed. Sections : SP (Single partition) - 20033, DP (Double partition) - 20034,Glazing clips - 4407

S&F in repair stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples.

S&F in repair 3.0 mm th sheet glass ordinary quality plain and glazing with oil putty in square n'exc .5 sqm in each pane.

S& F in repair 3mm thick figured glass, pin headed type and glazing with oil putty in squares not exc. 0.50 Sqm in each pane complete including hacking out old broken glass (any thickness size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips

S & F of 150 mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S & F of 150 mm long extruded anodised aluminium alloy handle, complete all as specified and directed.

S&F 125 mm MS, Butt hinges,medium weight cold rooled fixed with screw or welding complete.

S & F of 250 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt or cast aluminium alloy complete all as specified and directed.

S & F in repairs of 150 mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S & F in repairs of 150 mm long extruded anodised aluminium alloy handle, complete all as specified and directed.

S&F in repairs 125 mm MS, Butt hinges,medium weight cold rooled fixed with screw or welding complete.

S & F in repairs of 250 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt or cast aluminium alloy complete all as specified and directed.

S & F in repairs Ball brass valve high pressure with polythene float and nuts complete screwed for iron pipe or brass furrule bore of pipe 20 mm dia complete all as specified.

Demolition & breaking up drain pipes (SWG, AC, RCC etc) set in CM int dia of pipe 100mm with all fittings .

All as per item No. 75 above but 75mm dia pipe with all fittings.

S/F PVC pipes (SWR) single socketed in any length with rubber ring joints laid in trenches ,floor or wall for 110mm dia pipe

S/F PVC pipes (SWR) single socketed in any length with rubber ring joints laid in trenches ,floor or wall for 75mm dia pipe

S&F PVC (SWR) bend 110 mm dia all as specified and directed

S&F PVC (SWR) bend 75mm dia all as specified and directed

S& F in repairs stainless steel Sinks kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each complete all as specified.

S/F in repairs Vitreous china wash basin white flat back size 550 x 400mm including , waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand along with 32mm dia CP waste coupling and PVC waste pipe complete all as directed.

S & F for PVC connection pipe 15mm dia with PTMT nuts of length 450mm complete all as specified and directed by Engr-in-Charge.

S&F as in repairs PVC low/high level flushing cristern white 10 litre capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe 32mm dia jointed to WC and handle incl bracats fixed in repairs all as directed. (Note:- Removing existing fluhing system of CI or any other quality incl brackets).

S&F in repairs plastic water closet seat, black / White closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging deivce.

S&F in repairs vitreous china squatting pan ORRISA PATTERN size 580x440mm white with integral foot rests excluding flushing cistem & fush pipe fixed in repairs .

S&F in repairs 25mm chromium plated aluminium alloy anodised curtain rails or pipes fixed to brackets complete all as specified and directed.

S&F in repair aluminium anodised brackets for 25mm dia curtain rods complete all as directed.

M & L for preparation of new wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete incl seat and cover, flush pipe incl all joints complete all as specified and directed by Engr-in-Charge.

S & F in repair 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engr-in-Charge.

M&L For plain cement 1:2:4 type B2(usig 40mm graded stone agregate)as in Cement concrete in surface channels and drains complete all as specified.

Extra for forming fair finished drain or channel 60 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stoped ends etc complete all as specified and directed by Engr-in-Charge.

S&F in repairs 18/19 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work as in cup board shutters, partitions, shelves and similar work. Complete all as specified and directed.

S&F External teak wood lipping 6 mm thick for 18/19 mm thick particles board, block board or veneered particle board fixed with nails. complete all as specified and directed.

S&F, 100mm size Hasp and staple, safety type aluminium anodized stove enameled black with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed

Providing and carrying out water Proofing treatment to toilet, sunkan slabs, wet areas ets, after proper surface prepration, carry out cementitious injection grouting at leakage point using cebex 100 plasticised expanding grounding admixture, application of polymer modified at slab wall junction using Nitoband SBR latex screen modifier cum bonding agent and application of two coat of brushbond RFX two part acrylic polymer modified cementitious elastomeric waterproof and protective coating etc, complete including 15mm thick cement plaster in CM 1:4 all tools and plant as per manufacturers specification including removal & refixing of fixtures complete all as specified and directed by Engr-in Charge..

M&L cement concrete type E-2 1:5:10 using 40mm, graded brick agg as in sub base complete all as specified and as directed

S&F in repairs PVC (SWR) floor trap with grating including jointing with solvent cement 75mm bore dia complete all as specified and as directed

S/F 40 mm dia PVC pipe (out from sunken portion) for spout complete all as specified and as directed

M&L for rendering 10mm thick in CM 1:4 on concrete surfaces over roof slabs with admixture of integral water proofing compound @ 3% by weight of cement (WPC shall be measured & paid seperately)

Supply only integral water proofing compound

M & L for taking out old water proofing treatment to RCC roof slab as specified below and as directed by Engineer-in-Charge (a) The roof surface shall be thoroughly wire brushed, washed, dried up & cleaned to remove all foreign materials & dust to receive primer. (b) On the dried roof surface, apply one coat of bituminous primer @ 100 Gm/ Sqm as per manufacturers instruction. (c) On this primed surface, the approved APP modified bituminous membrane with non woven polyester mat as reinforcement weighing not less than 3.5 Kg/ Sqm laid by torch application metho and top surface shall be applied with bituminous aluminium paint. (d) The overlap while torching shall be 75mm on longitudinal direction & 100mm on transverse direction. Note:-Obtain material through out low laying Area

S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engr-in-charge.

S& f in repair vitreous china urinal ,Half stall type ( back or corner wall type) complete including providing and fixing plugs,bedding urinal against wall in cement mortar 1:2 securing Urinal to plug with and including 60 mm long brass screw ,pointing around urinal back in cement including urinal spreaderof PTMT any colour for fixing with 15 mm dia pipe,pvc conection 15mm x 600 mm long ,waste coupling of PTMT (Half or full threaded) 40 mm dia complete all as specified and directed by Engr-in-Charge.

S& F in repairs stainless steel Kitchen plate rack made of 0.63 mm thick stainless steel sheeet of size 750mm x 900 mm x 250 mm fixed to wall with screws complete all as specified and directed by Engr-in-charge.

Dismantling wall / ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets and alum snip grid.

S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling and providing 9mm th Acoustical board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid including hangers 3 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long all as specified and directed by Engr-in-Charge.

M&L for false ceiling with 10mm thick of panel size 600mm x 900mm plaster of paris sheets fixed with machine screws on GI channel 18 gauge thick, grid work main joists placed at 750mm centres, secondary joists placed at 450mm centres, GI angle suspenders from roof and treating the plaster of paris sheets with thin layer of pop with Gypsum binder, sanding the surfaces till smooth surface is obtained including preparation of surface and applying two coats of oil bound distemper over a coat of primer all as specified and as directed. Make: Gyproc or Equivalent

M and L for 10 mm thick Polypan PS 20010 Prelam PVC (hallow profile) sheets used for fixing on wall Lining and PVC false ceiling inclusive of necessary fixing as directed by manufacturer and engr-in-charge.

S&F 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specifiaction complete all as specified and as directed by Engineer-in-Charge

Dismantling asbestos cement / CGI (corrugated/ semi corrugated etc) sheet in roof covering complete all as specified and directed.

Dismantling MS works of any Desc. Not otherwise provided for

S&F Tubular Sections as in main cross beams , hip and jack rafters; purlins, where connected to common rafter , posts etc. conf to Fe-410-w(gdeE-250 quality-A) complete all as specified.

M &L for MS work as in wind tie or any other work incl cutting, drilling holes etc.

S & F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engr In Charge.

All as per item No 117 above above but plain sheet fix in valley gutter / ridge

M&L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer.

Petty repairs to joinery work such as easing of doors,windows,kitchen cabinets,refixing builder hardware guageetc by providing glue,nails,and screw to the satisfaction of user and other misc carpentary works assigned by the Engineer-in-Charge. Note:- Replacement of builders hardware if required shall be measured and paid saperately)

Petty repairs to Alluminium joinery works such as alluminim door,alluminim windows ,alluminium ventilator,and like similar work such as easing of doors,refixing of doors,windows,,refixing builder hardware such as alluminium beading to the satisfaction of user and other misc carpentary works assigned by the Engineer-in-Charge. Note:- Replacement of builders hardware if required shall be measured and paid saperately)

Supply only in repairs floor door stopper, with 150 mm long of Aluminium body and tounge with hard drawn steel spring in floor

Supply only in repair 3mm thick sheet glass ordinary quality, in square or reqd shape n exc 0.50 Sqm each pane including oil putty complete all as specified and directed.

S&F in repair door closer hydraulically regulated,designation No.1universal type,, Aluminium body suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed.

S&F in repair Towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

S&F in repair 12 mm thick toughned glass (tined/plain/Frosted/Film) with openable door of approved designe including all fittings, such as Bottom patch 163x50x31 mm ,with top patch ,over pannel patch ,Big-L, Glass door centre type lock,four side connector,Small-L ,three side connector,wall fix bracket, glass to glass 180 degree connector,glass to glass 90 degree connector,Double action floor spring ,pivot for top,,wall to glass 90 degree connector,wall mounted over panel patch with pivot, "H' type handle 450 mm long and double action floor spring, Hydraulically regulated heavy duty floor door closer of 10 years warranty complete all as specified and directed by Engineer-in-Charge. (Note:- All fittings should be stainless steel 304 grade and approved by Engineer-in-Charge.)

S&F in repairs 10 mm thick Toughned glass (tined/plain/Frosted/Film) for fixed doors,partitions, windows,and similar works including cutting to shap, drilling holes as required and fixing the glass on said location with necessary SS joining cleats complete all as specified by Engr-in-Charge.

S&F in repair water tank cover for tanks of size 500 ltr or 1000 ltrs complete all as specified and directed.

Dismanteling fencing wire mesh , any type

Dismanteling post, struts , (wood , steel or Rcc) any section incl. taking out embede portion in concrete or brickwork and making disturbed portion good

Excavation in post holes or similer holes each nexc. 0.5 cum getting out returning filling in and ramming earth around in layers n. exc 25 cm,watering , and removing surplus soils to a distence nexc 50m and making good surface in hard soils, complete all as specified.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate ) as in foundation concrete for fencing post complete all as specified..

S&F angle iron fencing post and struts including cutting tops to shape as directed, drilling holes, notching for wire etc , flat iron fillets ( for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-410-0 or Fe 310-0 anyu size complete all as specified.

S&F MS Screw bolts ( machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut length exc. 5 cm but not exc 10 cm long 11 to 15mm dia of shank complete all as specified.

S&F flat iron straps to chain link fencing including drilling bolting or riveting etc as directed

Supply only chain link MS galvanised fencing incl line wire 50x50mm mesh (12 gauge) size and any type of strands, rails, straining bolts etc incle provn of binding wire complete all as specified.

Fixing only chain link fencing any mesh, size and type to any type of standards, rails, straining bolts etc incl provn of binding wire complete all as specified.

M&L for round bars 10mm dia and over cut to length bent to shape required incl cranking, bending spirally for hoping for columns, hooking ends and binding with and incl MS Wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified..

M&L preparing new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer surface area not exc. 10cm in width or girth complete all as specified.

Crown Chemicals (BID ID -3323203)

DR J S CHADHA AND SONS (BID ID -3337008)

M/S RENUKA CONSTRUCTIONS (BID ID -3329443)

RAMESH PATIL (BID ID -3329725)

Shri Sant Cosntruction (BID ID -3329523)