8403/E8 REPAIR TO JOINERY DOORS, WINDOWS, VENTILATORS CUPBOARDS KITCHEN CABINETS ETC, AND SANITARY FITTINGS AND OTHER MISC B/R WORKS OF OTM AND MD ACCN OF INF BN-III AND MINOR UNITS AT MIL STN SHAHJAHANPUR UNDER GE EAST BAREILLY

Amount

Taking down cement plaster including racking out joints hacking for key and scrubbing down with water etc.

M&L rendering 12mm thick in cement plaster 1:6 on surfaces other than fair faces of brick work and surface finished even and smooth without using extra cement

M&L rendering 15mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and smooth without using extra cement

M&L rendering 10mm thick in cement plaster 1:4 on concrete surfaces of ceilling and finished the surface even and smooth without using extra cement all as specified

M&L for two coats of cement base paint incl preparation of new surface of wall complete all as specified and as directed.

M&L for one coats of cement base paint incl preparation of old decorated surface of wall complete all as specified and as directed.

M& L for two coat of oil bound distemper incl preparation of new surface of wall complete all as specified and as directed.

M& L for one coat of oil bound distemper incl preparation of old treated surface of wall complete all as specified and as directed.

M&L for 1mm thick JK Wall putty on wall all as specified and directed

M&L three coat of white wash on ceilling including preparation of new plastered surface and complete all as specified

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed.

S&F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisiting of frame made out of MS tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20 mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing.

S&F, 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed as specified and as directed.

S&F, 100 mm long butt hinges, extruded alminium alloy with galavanised mild steel hinge pin, anodised and fixed , type C-21

S&F, 150 mm aluminium handles cast type, anodised complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n. exc 4 sqm each complete all as specified and directed.

Taking down shutter of any description n exc 1 sqm each

Taking down shutter of any description exc 1 sqm but n exc 2 sqm each

S&F alluminium alloy anodised door frame fixed with side hung shutters and glazing fixed with and including 4.80 mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed :- (a) Frame 80x44x1.98mm thick with rawl plug (b) Middle and lock rail : 150x44x1.98mm thick (c) Bottom rail : 150x44x1.98mm thick (d) Top rail/sype : 85x44x1.98mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 150mm long, 100 mm long steel butt hinge ,aluminium tower bolt 9.9mm dia shoot 200mm long brass mortice lock 100mm 4 leaver ,aluminium stopper, hydraulically regulated door closer ( Make Sandhu ISI marked or ites equivalent approved make) (g) Making good of wall surface to match with existing surface complete.

S&F aluminium anodised sliding windows ,shutter glazing with and including 4.8 mm thick tinted glass fixed with rubber gasket with aluminium beading, clips , frame, with duco pattern grill of size 75 mm X 75 mm and steel mosquito wire netting fixed with beading made with aluminium section suitable for three track slids . Making good of wall surfaces to match with existing surfaces complete all as specified and directed.

S&F aluminium anodised windows,ventiletators frame with side hung shutters and glazing with and including 3.8 mm thick tinted glass fixed with rubber gasket with aluminium beading ,clips, frame made with aluminium section as appended below (i) Frame :65X40X1.98 mm thick (ii) Top/bottom rail and style /rail of shutter : 44X47X1.98 mm thick (iii) Aluminium beading - 0.7 mm thick (iv) Aluminium fitting such as peg stay,aluminium hinges,aluminium handle 100 mm long,aluminium tower bolt 100mm long (v) Making good of wall surfaces to match with existing surfaces complete all as specified and directed

S & F Mild steel work as in chowkats/frame of door or gates of angle or other section with gusset plate , rail braces etc complete drilled for fixing of steel sheeting or other covering , doors etc to be prepared for hanging or sliding with and inclu either hooks and hinges or steel hanging door fittings ( exclusive of steel , sheeting or other covering , running rails and guisides ) and hanging also fastening and fixing complete with toothing bonding of brickwork which was disturbed during taking down of chaowkhat included in this item including brickwork plaster nothing extra will be paid down

S&F pressed steel frames of size 125*60 for doors with one or more rebates including necessary fixing lugs,hinges,lock,strike plate,etc. complete as specified,with toothing bonding of brickwork which was disturbed during taking down of chaowkhat included in this item including brickwork plaster nothing extra will be paid down

S&F pressed steel frames of size 165*60 for doors with one or more rebates including necessary fixing lugs,hinges,lock,strike plate,etc. complete as specified,with toothing bonding of brickwork which was disturbed during taking down of chaowkhat included in this item including brickwork plaster nothing extra will be paid down

S& F factory made single extruded WPC(wood polymer composite)solid door/window/ceosetory windows and other frames/chowkhat of size 65*125mm comprising of virgin PVC polymer of K value 58-60(suspension grade),calcium carbonate and natural fibres(wood powder/rice husk) and non toxic additives(max toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum screw withdrawl strength of 2200 N(Face) and 1100 N(Edge) min compressive strength of 58 N/mm2 modulus of elsticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per dir of engineer-in charge(M.S hold fast/lugs or SS dash fasteners shall be paid for separately)

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.

S&F factory made single extruded WPC(wood polymer composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60(suspension grade) calcium carbonate and natural fibres(wood powder/rice husk)and non toxic additives(max toxicity index of 12 for 100 gms)having min density of 650 kg/cum and screw withdrawl strength of 1800 N(Face) and 900 N(Edge) min compressive strength of 50N/mm2 modulus of elsticity 850N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws all as per dir of Eng-in charge

S & F 250 mm long mild steel sliding door bolts, ISI marked clip & bolt type, stove enamelled black, with bright bolt not less than 16mm dia with and including minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

S&F 2nd class hard wood glazed and skeleton shutters 35mm thick open rebated and prepared to receive glass , gauze etc (without sash bars) , edges of framing plain , chamfered or rounded , fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) , supplied and fitted to chowkats.

Dismantling boarding any size and description fixed in any position with nails

S&F 20mm thick PVC boarding with nails as in cub board shelves in any situation planed one side with butt joints complete all as specified and as direcetd.

S&F 25mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sisides.

S&F haps and staple 125 mm long safety type aluminium anodised with mild steel hing pin including bolt to hing plate and fixed with screws

S&F 75 mm butt hinges medium weight cold rolled mild steel and fixed

S&F 100 mm butt hinges medium weight cold rolled mild steel and fixed

S&F 150 mm long mild steel pressed handles oval type stove enamlled black

S&F 200 mm long mild Barrel tower bolt, oval type stove enamlled black with bright bolt and fixed

M & L preparing wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down steel/wooden window of any size and description complete.

S&F steel window with pressed steel frame(size 95*45*1.25mm)side hung shutter including box type hinges with steel handle and steel peg stay complete with glaed openable shutter with glazing bar(open outside) and wire gauged openable shutter without glazing bar(open inside),detailed or welded complete all as specified and directed and as per Drg no TD-88 sh 1/2 and 2/2. (i)Two shutter i.e wire gauged and glaed shall be fixed in one composite frame and both shutter shall be measured as one unit. (ii)rate for filling of PCC frame deemed to be included in quoted rate. (iii)MS grill,wire gauge and glass shall be measured and paid separately.

S&F steel ventilator with top hang shutter including hinges steel pag stay,complete.

M&L framed work such as grills grating etc with end of bars shoulderd and/or riveted .welded or forged into spikes.framedguard bars iron doors.ladders framed balusters , walk ways. Railings, frame work of of water tanks and ssimilar work conforming to Fe410

S&F 3 mm thick sheet glass, Ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.

-ditto- but 4.8mm thick frosted sheet glass.

M&L applying 2 coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer including surface preparation over 10 cm width and girth complete.

Supply and fix in repairs galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed .

Hacking out old broken glass of (any thickness,size,quality or description) from old wooden/steel frame ,or stones, concrete or brick surrounds glazed with putty or fixed with beads

M&L PCC 1:3:6 type C-1 using 20mm graded stone aggregate for filling in bed block of hold fast etc complete all as specified and direcetd.

Demolition of cement concrete (un reinforced) of any description and in any position not other specifically provided for

M&L for cement concrete (1:5:10) type E-2 as in foundation filling and mass concrete

M&L for preparation of sunken floor and making couvet filld at junstion of wall in CM 1:3 with water proofing compound(DURAKRIT) then apply acrylic(PMC) slurry as per mfg instruction as 1:2 on floors and wall upto floor level,and apply 2 coat after 4 hours.After that Ponding test will be carried out.After that plaster all surface with CM 1:4 20 mm thick with WPC(DURAKRIT)

Removing existing water proofing treatment including plaster & PCC bedding layer if any and preparing surfaces to the entire satisfaction of Engineer-in-Charge / GE including taking down existing plaster, cleaning of all foreign material such as grass, roots, dust etc and roughening the concrete surfaces by wire brushing and washing down to remove dust etc. flushing at junction of parapets complete and removing the same to the places where directed by Engineer-in-Charge

M&L for rendering 10mm thick plaster in CM 1:4 with WPC on roof surfaces over 25mm thick PCC B0 1:2:4 complete all as specified and direcetd.

M&L for preparation of roof surfaces, applying a coat of primer@ 0.40Kgs/sqm applying a coat of bitumen grade 85/25 @1.2kg/sqm supplying and laying water proofing treatment with using polymeric water proofing membrane (weight not less then 3kg/Sqm) consisting of 100 micron HMHDPE film centre core including applying a coat of bitumen 85/25 grade @ 1.2kg per sqm on top surface of membrane and torch application of membrane with 10cm overlap where required and finally finished with and including a coat of aluminium paint @0.20Ltr/Sqm as per manufacture instruction complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises

M & L Glazed ceramic coloured tiles in vertical surface 350 mm x 250 mm x 7 mm/450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white cement or colour cement including 10 mm thick in CM 1:4 complete all as specified and as directed.

M&L providing non- skid glazed ceramic tiles coloured7-8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but n xc 0.11 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

M&L for Vitrified light shade colored ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and incl 15mm thick screed bed in CM 1:6 complete complete all as specified and as directed.

M&L for Vitrified light shade colored ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm in skirting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and incl 10mm thick rendering in CM 1:4 complete complete all as specified and as directed.

M&L for 22 mm thick rubber moulded chequered cement concrete coloured tiles area of each tile exc 0.06 sqm but n.exc 0.12 Sqm , set & jointed in neat cement slurry and pointed with cement & pigment to match the shase of tiles in floors over and incl 20 mm thick screed bed in CM 1:6 complete all as specified and as directed.

S&F in repair vitreous china squatting pan "Orissa" pattern size 580mmx440mm white with integral foot rests excluding flushing cictern and flush pipe all as specified

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white(excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed.

S&F in repair one piece vitreous china wash down water closet pan white colour including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed.

Supply only plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device

S&F in repair CP Health Faucet with 1 Meter Flexible tube & Hook complete all as specified an directed.

S&F in repair toilet paper holder box type coloured of vitreous china fixed to wall with chromium plated (CP) brass screw complete as specified and directed

S&F in Vitreous China table top wash basin of suitable size including SS bottle trap, HDPE waste pipe including fixing on counter with SS waste coupling complete all as specified and as directed.

S & F in repair for 0.8 mm thick stainless steel in graceful glory range ,anti scratch, satin finish of popular range kitchen sink over all size 990x459mm , double bowl size 400x340xx200 mm incl waste pipe & SS coupling, washers etc. complete all necessary fittings all as specified and as directed.

S&F in repairs 15mm dia two way angle valve, cast copper alloy, chromium plated screwed down, high pressure complete all as specified and directed.

S&F in repair Jet spray chromium plated with 1mtr heavy PVC hose with chromium plated nuts complete all as specified and directed.

S&F in repair PVC bathroom cabinet standard quality and size 432x311mm complete

S & F in Repair 10 ltrs capasity PVC valveless syphonic action type flushing cistern low level white , with inlet ball valve, float and handle including bracket and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and as directed.

S&F in repairs Vitreous China bowl urinal flat back, size of 465x355x265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)

Taking down old 110/75 mm bore PVC(SWR) pipes in any position complete all as specified and directed

S&F 75 mm dia PVC (SWR) floor trap plain with greting incl jointing with solvent cement complete all as specified and directed

S&F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints laid in trenches or in floors all as specified

S&F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints fixed to wall all as specified

S&F 75 mm bore. PVC (SWR) bends complete all as specified and directed

S&F 110mm bore.PVC(SWR) junction single (single T) equal or unequal with access door complete all as specified and directed

S&F 110 mm dia PVC (SWR) vent cowl complete all as specified and directed

S&F 110 mm PVC (SWR) bend any radius complete all as specified and directed

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches all specified and directed

Taking up or down existing GI Tubing15 mm dia & connections including cleaning for refixing or removal to store all as specified and as directed

All as above herein before but 20 mm dia complete all as specified and directed

S&F,16 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Refixing only GI tube 15mm dia medium grade will new fittings and fixed to wall, ceiling or laid in floor and ceiling and wall all as specified and dircted

S&F, GI tube 20 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors complete all as specified and directed.

S&F,20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Refixing only GI tube 20mm dia medium grade will new fittings and fixed to wall, ceiling or laid in floor and ceiling and wall all as specified and dircted

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plug , washer and wastes , including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe , overall size 495mmx420mm bowl size 410mmx330mmx160mm

S&F in repair bib taps 15mm bore standard of PTMT any colour high pressure screwed for iron pipe and fixed all as specified (minimum wt. 90gms).

S&F (in repairs) Bib taps cast copper alloy chromium plated ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed..

S&F (in repairs) angle cock cast copper alloy chromium plated fancy type screwed both end for iron pipe or or brass ferrule for 15 mm bpre of pipe complete all as specified and as directed.

S&F (in repairs) Stop cock (Concealed) cast copper alloy chromium plated ,screwed both end for iron pipe or or brass ferrule with long shank and cup for 15 mm bpre of pipe complete all as specified and as directed.

S&F in repair swivel shower rose of PTMT any colour for fixing with 15mm pipe fixed all as specified

S&F in repair swivel shower rose of brass Chromium plated for fixing with 15mm pipe fixed all as specified

Dismantling of existing water tanks capacity n exc 500 ltr and removing to store complete all as specified and directed

Dismantling of existing water tanks capacity exc 500 ltr n exc 1000Lts and removing to store complete all as specified and directed

S&F rotational moulded polethylene water tank of 500 ltrs capacity triple layered (cylindrical vertical with closed top) hoisted and fixed in position all as pacific SSR Part- I

S&F rotational moulded polethylene water tank of 1000 ltrs capacity triple layered (cylindrical vertical with closed top) hoisted and fixed in position all as pacific SSR Part- I

S&F in repair 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high denty plastic ball screwed for iron pipe and fixed (min wt. 210gms).

S&F in repair 15mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high denty plastic ball screwed for iron pipe and fixed (min wt. 142gms) complete all as specified and directed

S&F 20 mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for iron pipe complete all as specified and directed

S&F in repair vitreous china wash basin white, flat, back, size 550x400 mm excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply waste pipe all as specified

S&F in repairs 15mm bore pillar tap cast copper allloy with capstan head Chromium plated scwed down with or without letter Hot or Cold with long shank and fly nuts scrwed for iron pipe and fixed as specified and directed.

S&F in repairs brass CP basin mixer for mixing hot & cold water screwed down for iron pipe and fixed of 15mm dia pipe complete all as specified and directed

S&F in repairs floor door stopper of aluminium alloy body and tongue , anodised with hard drawn steel spring fixed in floor , overall length of cover plate 150mm complete all as specified and directed

Welding in repairs exc 2.5 cm but n exc 5 cm in length , thickness of metal to be welded n exc 6mm for door,window,shutter etc. complete including taking down and efixing if required

Supply and fix 32mm dia wast fittings brass chromium plated for basin with long screwed shank and fly nuts, flange end bedded in red lead cement and other end fixed.

S&F in repair PVC connection 15mm bore length not less than 300 mm long with both ends PTMT nuts complete all as specified.

S&F in repair 15mm bore angle stop valve of PTMT any colour high prssure screwed for iron pipe and fixed all as specified (minimum wt. 90gms).

S & F in repairs 150 mm size mild steel door springs including roller and roller plate complete.

S&F in repair CP towel rail 20mm dia, 600 mm long between flanges complete all as specified and directed

Demolition of cement concrete (un reinforced) in ground floor for pavings n.exc 15cm thickness (below are above ground level) complete all as specified and directed

M&L 75 mm thick PCC 1:3:6 type C2 using( 40mm graded stone aggregate) as in plinth protection/foot path finishing cement concrete even and smooth with out using extra cement complete all as specified and as directed.

Demolition of stone slab and tiles of any description or thickness in floor, aprons etc.

Supply and fix 32mm/40mm dia waste pipe for wash hand basin/urinals complte all as specified and directed

M&L for machine cut mirror polish kota stone slab flooring20-25mm thich over 15mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigmen to match the shad of the slab including round nosing at corners rubbing and polishing complete

M&L for machine cut mirror polish kota stone slab 20-25mm thich in riser of step,skirting,dado and pillers over and including 15mm thick rendering in CM 1:4 including rubbing and polishing complete

M&L for granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing types over 20mm thick screed bed in CM 1:6 complete..

M&L for 20 mm thick granite (of any type) tiles machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick rendering in CM 1:4.

Demolition of brick work in cement mortar incl all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified and directed

M&L brick work with sub class B bricks burnt straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with sub class ‘B’ old size bricks straight or curved on plan to any radius as in half brick thick wall built in CM 1:4 complete all as specified and directed

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets as specified and directed

S&F 6 mm thickE-board ceiling laid/inserted to GI frame work of grid size 605x605mm as in false ceiling all as specified, including Hangers 3 mm dia GI wire (upto 1200 mm in length) adjusting levels fixed to roof slabs/truss/purlin by cieling cleats made of GI flat 40 x 3 mm size 60 mm long complete.

S&F in repair curtain rod SS 25 mm dia including fancy nob bracket & end holder for each rod not exc 1.5 cmfor hangging curtain rod complete all as specified and directed

S&F in repair 600mmx450mm bevelled edges mirror consisting of 5.5mm thick fixed to plug with chromium plated nut/screw

S&F in repair Aluminium Mortice lock 4 lever , size 75mm as all specified and directed

S&F in repair door closer aluminium (Die cast) body hydraulically regulated, designation No 3, universal type, suitable foor door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S&F in repair door closer aluminium (Die cast) body hydraulically regulated, designation No 2, universal type, suitable foor door shutter of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed

S&F in repair double action floor spring hydraulically regualted made up of minimmum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed

S&F partition wall of anodised aluminium hollow section members of size 63.50 mmX38mmX2mm thick with distance of vertical hollow section 1.0 m to 1.2 m and 1.0 mtr height wall having top rails,bottom rails and middle rail of size 63.50mmX38mmX3mm and upto middle rail wall panels shall be covered by 8 mm thickPVC sheet solid with decorative choice laminations fixed into the wall with aluminium clip and bolt from middle rail to top rail panels shall be covered with 5.5 mm thick tinted glass fixed with aluminium strips/beadings with rubber gasket, sketch plan of wall as per existing or as provided by the Engineer-in-Charge complete all as specified and directed including dismantling old partion wall complete.

Taking down and cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes,etc of capacity exc 500 & n exc 1000 litres and refixing the tank.

Taking down and cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes,etc of capacity exc 250 & n exc 500 litres and refixing the tank. complete all as specified and directed

S&F in repairs brass chromium plated wall mixer 3 in 1, 15mm for mixing hot & cold water screwed down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and as directed.

Dismantling Asbestos Cement/CGI (Corrugated, Semi corrugated etc.)/galvalume sheets in roof coverings complete all as specified & directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws to steel frame work, as specified.

S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridges, roof covering/clading to wall, fixed with self tapping screws as specified.

M&L 6mm thick Asbestos Cement, one piece plain angular ridge in roof fixed with L Type or J type or crancked hook bolt etc complete all as specified and directed

M&L 6mm thick Asbestos Cement, Corrugated or Semi corrugated sheets in roof, wall fixed with L Type or J type or crancked hook bolt etc complete all as specified and directed

S&F 6 mm thick PVC pannelled hollow type with stiffener inside & top and bottom layer prelaminated PVC sheet not lees than 0.5 mm thick fixed to wall or solid PVC sheet strip 50cm X 5cm @ 1 meter c/c complete all as specified and directed

M & L glass shelf for corner in arc 300 mm & 5 mm thick fibre/glass including steel brackets and front railing min 25 mm height with steel pipe complete all as specified and directed

M&L for preparing surfaces of wood and wood based materials,new or old,of any description and girth,including creosote and raw linseed oil complete all as specified and directed

S&F Aluminium wardrobe hooks(triple) 50mm to 60mm

S&F in repair 15 mm dia fancy type stop cock , chromium plated with long shank and cup (concealed type) for iron pipe or for unions and fixed complete all as specified and directed.

Taking down aluminium door/windows of any size and description and repair/replacement of parts such as beading, rubber gasket , floor spring , mortice lock etc and refixing in the same opening all as specified and directed.

S&F in repairs service tank lid/cover (MS tasla) of size 0.45m dia and 0.2m height made with 0.9mm thick GI sheet shaped into hollow semi sphere fixed to over head PVC service tank of 250 ltrs to 1000 ltrs capacity including necessary nut, bolts, washers and locking arrangement complete all as specified and directed.

S&F in repairs Hat and coat hooks, solid body, 175mm to 250 mm of brass complete all as specified and directed.

S&F in repairs soap dish 160x160x90mm, chromium plated type fixed to plugs with chromium plated brass screwed complete all as specified and directed.

S&F in repair PVC sheet 5 mm thick of any colour as in partition etc ,fixed to RCC/MS/wooden angles complete all as specified and directed

M&L preparation old painted concrete/plastered surfaces of any description over 10 cm girth or width,not otherwise described and applying of synthetic enamel aint complete all as specified & directed

M&L for writing letters or figures(Block,Roman,Italic or Indian)n exc 30 cm high with synthetic enamel paint complete all as specified and directed

M/S SHAHABUDDIN AND SONS (BID ID -3334564)

M/S MANSI TRADERS (BID ID -3334237)

M/S WASEEM KHAN CONTRACTOR (BID ID -3332714)

PRASHANT A TO Z TRADERS (BID ID -3322764)