Design, Supply and Commissioning of 3D animation Multimedia Projection Mapping at Naurang Rai Pond, Ambala City, Haryana

Supply, Installation, Testing and Commissioning of 3 Chip DLP 4K 25000. lumens projector “Supply, Installation, Testing and Commissioning of Projector 3-chip DLP, should have 3 laser diodes for true color production(Red,green,blue), Min output resolution 3840 x 2160 (UHD 4K), brightness min. 25,000 lumens, RGB Laser digital projector , Contrast Ratio : min 6000 : 1, illumination minimum 50000 hours, Omni irectional,Motorized horizontal and vertical lens offset , Inputs: 12G SDI,HDMI 2.0,DP,Analog Controls: RS232 in/out, RS422 in, Ethernet (10/100), Weight should not be more than 42kgs, Noise should not be more than 50dB, REC 2020 color space production, image processing minimum 1.2Gpx/s, typical power consumption should not bemire than 1550 watts, should be complete with mounts and lens

Supply installation and fixing Audio / Dimmer Rack – 19 “ – 42 U Rack, 600 mm wide with Aluminum frame and 1000 mm depth, top bottom side panel and rear door of CRCA Sheet size 1 mm, front door with Aluminum section and acrylic/glass sheets, with minimum specifications or as approved makes.

Supply, Installation, Testing & Commissioning of a all-weather 2 x 11.25” three-way horn loaded high-performance loudspeaker system, delivering a frequency response of 90 Hz – 23kHz (-3 dB) with extended range down to 72 Hz. The system supports high power handling with dual LF drivers rated at 2 x 500W AES (2000W peak each), an MF driver at 80W AES (320W peak), and HF drivers at 80W AES (320W peak). Designed with user-rotatable horns offering 70° x 40° or 90° x 50° dispersion, it features active crossovers at 630 Hz and 6.3 kHz for precise band separation. The LF section employs dual 11.25” Delta Drive woofers with 3.5” copper voice coils and Fortex™ weather-resistant cones, the MF section houses a 1.4” exit compression driver with a 3” ferrite coil, and the HF section integrates dual 1.25” exit compression drivers with a conical waveguide. The cabinet is built from marine-grade birch ply and provides connectivity via 2 x NL-8 SpeakOn connectors. With a maximum SPL of 137 dB continuous and 143 dB peak, this system is ideal for large-scale sound reinforcement applications

"SITC of an all-weather 18"" High-Performance Passive Subwoofer, engineered to deliver deep, impactful low-frequency reinforcement in demanding professional audio environments, This subwoofer features a wide frequency response of 38 Hz – 800 Hz (-3 dB) and an extended range of 41 Hz – 200 kHz (-10 dB), ensuring tight, well-defined bass across a broad spectrum. Built for power and durability, the system offers a continuous power handling capacity of 1000W AES and peak power output up to 4000W, making it suitable for high SPL applications without distortion. With a maximum SPL of 137 dB and a sensitivity of 98 dB, it delivers high-efficiency performance and deep low-end presence with excellent clarity. The subwoofer is equipped with an 18"" ultra-long excursion ADR driver featuring a robust 4"" copper voice coil and ferrite magnet, designed for high-output environments that require sustained low-frequency energy. The cabinet is built from marine-grade birch ply The advanced driver design ensures superior control, low distortion, and extended bass performance, making it a reliable solution for professional-grade installations"

SITC of 2 x 1500W Class H Professional Power Amplifier, designed for high-performance audio reinforcement applications. The amplifier offers two output channels with exceptional power ratings, delivering 900W per channel at 8Ω, 1500W per channel at 4Ω, 1800W per channel at 2.7Ω, and 1800W per channel at 2Ω. In bridged mode, it supports 2700W at 8Ω and a robust 3600W at 4Ω, making it ideal for demanding setups in large venues. It includes 2 analog inputs and 2 link outputs for signal distribution, along with 2 power outputs. The input connections are made via XLR connectors for both signal input and link output, while Speak ON and binding post terminals are provided for secure and versatile speaker connectivity. The amplifier features superior system performance, with frequency response from 20Hz to 20kHz (±3 dB), Total Harmonic Distortion (THD) better than 0.08% at 1 kHz, and better than 0.18% across the full range (FR). It maintains a nominal system gain of 36 dB, with an input impedance of 20kΩ and a damping factor greater than 500 at 1 kHz into 8Ω, ensuring tight bass control and accurate signal reproduction. Advanced protection circuits are built in, including short-circuit, thermal, and DC output protection, along with integrated signal limiters and Gorilla limiters for safe and distortion-free operation. The amplifier is equipped with X Series pre-amps for superior sound quality and dynamic headroom. In terms of power efficiency, the unit draws 5A nominal current at 240V (4Ω load) and 10.4A at 120V, offering energy efficient performance for continuous use in professional settings’

SITC of 2 x 2600W Class H Professional Power Amplifier, engineered for high-demand audio reinforcement in large-scale installations. This amplifier delivers outstanding performance with two powerful output channels, providing 1500W per channel at 8Ω, 2600W per channel at 4Ω, 2800W per channel at 2.7Ω, and 3000W per channel at 2Ω. In bridged mode, it supports up to 4500W at 8Ω and 6000W at 4Ω, making it ideal for heavy-duty applications such as concerts, auditoriums, and large-format PA systems. It includes 2 analog inputs, 2 link outputs, and 2power outputs, with XLR connectors for signal input and link output, and Speak ON plus binding post terminals for flexible and secure loudspeaker connections. The amplifier offers excellent system specifications, including a frequency response of 20Hz to 20kHz (±3 dB), Total Harmonic Distortion (THD) better than 0.08% at 1 kHz and 0.18% across the full range, and a nominal gain of 36 dB. The input impedance is 20kΩ, and the damping factor exceeds 600 at 1 kHz into 8Ω, ensuring enhanced control over low-frequency transducers and superior audio fidelity. Integrated protection features include advanced short-circuit, thermal, and DC output protection, along with intelligent signal limiters and proprietary Gorilla limiters for safe and distortion-free operation. The inclusion of X Series pre-amps further enhances headroom and audio clarity.

SITC of an 8-in 8-out Loudspeaker Processor, Matrix & Controller, designed for advanced audio signal processing in professional sound reinforcement systems. The unit is equipped with 8 balanced audio inputs and 8 balanced audio outputs via Phoenix connectors, supporting a minimum load of 150 ohms for reliable and flexible integration in distributed audio environments. The processor delivers high-precision signal conversion using 48-bit AD/DAconverters, and ensures exceptional audio fidelity with a THD+N of 0.0025% (typical at +4 dBu, 1 kHz, 0 dB input gain) and a signal-to-noise ratio greater than 110 dB. The frequency response spans 20 Hz to 20 kHz, maintaining flat and transparent audio performance with +0/0.5 dB deviation.Each input and output channel features 6-band parametric EQ filters,configurable as Bell or Shelving filters, with center frequencies selectable in 1/48th octave steps from 20 Hz to 20 kHz, allowing precise tonal control and system tuning. This DSP-based matrix processor is ideal for installations requiring flexible routing, fine-tuned equalization, and seamless integration with amplifiers and loudspeaker systems

Supply, Installation, Testing & Commissioning of Software Controlled Digital Dante 16X16 Matrix DSP with an auto mixer, matrix mixer, feedback suppression and Dante audio networking in one purpose-built DSP processor with below Specifications:Input Channels: 16 Balance Line Inputs, Output Channels: 16 Balanced Line outputs, Connectors: 3.81 mm Pheonix Conectors, 12-pin, Input / Output Impedance: Input - 11.5 KΩ, Output - 150Ω, Max. Input Level: 14 dBu - Line, -7 dBu - Mic, Phantom Power: +48V DC, selectable per input,

Supply installation testing and commissioning of Animation Laser : Source - Laser Diode : 15w RGB/RGBY, Power Consumption ≤ 800w, Scanner - 60kpps, Scan Angle - ±30°, Linearity DIstotion <2%, Beam Diameter And Divergence : 9x6.5mm, 1.2mrad, Control modes -Integrated Hardware to Support Animation Software Over ILDA or CAT6,Ingress Protection - IP65

Supply, Installation, Testing & Commissioning of IP65 600W LED Moving head, with fuII functions as BEAM, SPOT, Wash and FRAMING. It should come with high efficient optic, linear CMY color system, which offer super rich color and seamless CMY mixing, It should have a specially selected flexible framing system allows user to cut presice shapes; And the 360° rotating animation wheel give stunning effects such as fire or water wave.The item should be perfect fixture for temporary outdoor installation, concerts, events, theme park and commercial activities etc. The Moving head should follow the Below mentioned Technical Specification : Max. Power ≥ 750W, Light source ≥ LED 600W, Angle - 7-50°, Display - On board Control, Custom Mode,0- 25Hz Strobe, Pan/Tilt rotation - 540°/270° (8-16bit), Con Personality - BASIC/35CHS, STANDARD/41CHS, Extend/44CHS, Rotating Gobo - 10 + 1 Gobos, Prism - One pice of 4 F prism with bi-directional rotation, Speed adjustable, Framing System - Framingsystem 4 shutter blade; Each blade's angel and direction can be individual controlled, fullyblackout; The whole Framing module is ±60°. Animation Wheel - 1 animation wheel, Speed adjustable, Animation Wheel - Bi-directional rotation,Speed adjustfable, Frost - 1 Frost filter, Focus - Motorized linear focus, Special - Pan/Tilt movement blackout, User-selectable pan/tilt ranges, gravitation sensor for auto screen positioning, Voltage - AC100~240V 50/60Hz, Operating Protocol DMX,RDM,ARTNET,sACN, IP Rating ≥ IP65, Operating Temp. - -20°C50°C, Built - VO / Die Cast Alluminium, Certification - BIS