PROVN OF FALSE CEILING IN BUILDING NO. P-36/1, SECURITY WALL IN FRONT OF BUILDING NO. P-11/02 AND 12/02, SPL REPAIR TO 04XTOILETS IN BUILDING NO. 6/6A, 9/6, P-8/6C OF MH AND UPGRADATION OF HELIPAD AT MIL STATION PITHORAGARH UNDER GE (MES) PITHORAG

Amount

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft / loose soil complete all as specified and directed

Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface in soft / loose soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5M in depth for foundation etc and getting out in hard/dence soil complete all as specified and as directed.

Returning filling in including sperading levelling, watering and well ramming in layers not exceeding 25 cm as excavated soil complete all as specified and directed.

Removing excavated soil to a distance not exc 50 metres depositing where directed at a level not exceeding 1.5 metre above starting point complete all as specified & directed

M & L for PCC type C2, 1:4:8 (40 mm graded stone aggregate) as in foundatiom, filling and mass concrete complete all as specified and directed.

M & L for RCC (Nominal Mix) Type B1 1:2:4( using 20mm graded stone aggreagate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M & L for RCC (Nominal Mix) Type B1 1:2:4 (using 20mm graded stone aggreagate as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

M & L for RCC (Nominal Mix) Type A1 1:1.5:3 (using 20mm graded stone aggreagate as in slab, beams, columns complete all as specified and directed

M & L for RCC (Nominal Mix) Type B1 1:2:4 (using 20mm graded stone aggreagate) as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M & L for PCC type B-1, 1:2:4 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, coping, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, ncessary form work complete all as specified and directed

Use and waste for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces complete all as specified and directed.

Use and waste for formwork to suspended slab such as roof/floor slab, landing and similar work n.exc 200 mm thick for rough finished surfaces complete all as specified and directed

Use and waste for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc for rough finished surfaces complete all as specified and directed

M&L Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished surface of concrete complete all as specified and as directed.

M & L for Precast cement concrete block masonry Type C1, 1:3:6 with (20mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in mortar 1:6, complete all specified and directed

S&F MS Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S & F Framed work such as grills, gratings, etc., with ends of bar shoulder &/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks & similar work conforming to Fe 290 Gde E-165

M & L for preparation of new seel surfaces of any description, not otherwise described over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces on wall in CM 1 : 4 finished even and smooth with out using extra cement complete all as specified and directed complete all as specified and directed.

M & L for prepation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement base primer complete all as specified and directed.

S & F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

M&L for TMT bars 10 mm Dia and over cut to Length bent to shape required incl cranking, bending, spirally for hooping for columns with an incl MS wire (annealed not less than .90 mm Dia) or securing with clips complete all as specified and directed. .

All as per item No 23 above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders complete all as specified and directed.

Treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n exc 0.1 sq. m each treated with tar of coal tar complete all as specified and directed

Supply only mild steel galvanised chain link fencing complete all as specified and as directed.(Note- weight of chain link fencing shall be measured by BOO)

Fixing only chain link fencing incl line wires any mesh ,size and type to any type of satndard ,rail straining bolt etc incl provn of binding wire complete.

S&F 10 mm round bars as in stiffner to hold the chain link fencing fixed with angle iron post, complete all as specified and directed .

S&F mild steel screw bolts (machine made) with hexogonal or square heads at one end and screwed the other , or screwed both ends , each screwed end to be fitted with washers and one hexogonal or square nut 11 to 15 mm dia and exc. 5 cm and n.exc. 10 cm long and straining bolt complete all as specified and as directed.

S&F False ceiling consisting of wall angle, main T, cross T of size 25mmx25mmx1.4mm thick powder coated GI grid frame work jointed angle, mild steel hanging hooks not less than 4 mm dia with adjustable arrangement of height of ceiling with and including E-board of size 600 x600mm fwith necessary off cutt and fixing arragnement complete all as specified and directed.

S&Fsolid PVC wall lining consisting of 5 mm thick single side prelam colour sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.

S&F 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on wall to make PVC frame complete all as specified and directed.

M&L for applying two coats of oil bound distemper over a coat of primer on old plastered or unplastered surfaces of wall including preparation of old surface.by removing of existing treatment and applying 2 mm thick Birla wall care putty to get smooth surface complete

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

S&F Glazed ceramic joint free tiles in vertical surface/skirting & dado, 7 to 8 mm thick area of each tile exc. 0.06 Sqm but not exc. 0.18 Sqm set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendring in CM 1:4 complete all as specified and directed.

Demolition of plain cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for providing 75 mm thick PCC type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in sub-bases of floors to receive floor finish and similar work complete all as specified and directed.

S&F in repairs 1000 liters capacity rotational moulded polyethylene water storage tank three layered in white colour (Cylindrical vertical with close top) hoisted and fixed in position with and including 20mm bore dia of Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms ) all as specified.

S&F 75mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors or wep holes complete all as specified and directed.

Taking down chowkats or frames exc. 1.5 Sqm but n.exc 4 Sqm each with shutters (W/o taking off shutters from the frame) and removal to store.

Taking down cement plaster on brick walls including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M & L 15 mm thick cement plaster on fair faces of brick work or concrete surface on walls in CM 1:6 finished even and smooth with out using extra cement complete all as specified and directed.

M&L for applying one coat of oil bound distemper on old plastered or unplastered surfaces of wall including preparation of old surface.

M&L for preparation of new steel surfaces exc. 10 cm width or girth not other wise described and applying two coats of synthetic enamal over a coat of red oxide primer paint all as specified.

S & F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified (Note : Glass pane shall be measured and paid for separately under respective item)

S & F Anodised aluminium door shutters, aluminium section weighing not less than 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos of size 150 mm in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed (Note : Glass pane shall be measured and paid for separately under respective item).

S & F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. thickness of section not less than 2 mm complete all as specified and directed.

S & F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S & F 3mm thick sheet glass, ordinary quality, glazing with oil putty or fixed with wooden beads in steel/wooden windows in squares n.exc 0.50sqm each pane at any floor/hight including solar/sun control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified & directed.

Dismantling of plain or corrugated steel sheeting any guage, thickness including Nainital or similar pattern roof covering complete all as specified and directed.

M & L Pre- painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws in single length complete all as specified and directed.

Dismantling of wrought Iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S & F steel work as in tubular truss including special any shaped, washer etc. complete using screw or induction butt welded tubes confirming to IS 1161-1979 gde st-240,including gusset plate pole etc. and similar work complete all as specified and directed

Demolition of precast concrete articles and pre-cast cement concrete block walling, ashlar fencings, dressed stone work including all quoins, arches, pillars etc. built in cement mortar complete all as specified and directed.

M & L for preparing of old steel roof sheet corrugated / plain surface exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint (MB Green-Camouflage pattern) complete all as specified and directed.

M & L for preparation of old or previously untreated steel surface etc of any description over 10cm width or girth and applying one coat of Aluminium paint complete all as specified and directed

S & F Nylon anti bird netting any size including all necessary materials for fixing of net along wall and ceiling as per manufacturers instructions complete all as specified and directed.

M & L for preparation of old plastered surface of walls and applying one coat of exterior emulsion paint 1st quality (Apex ultima of Asian Paints or equivalent in Berger/Shalimar) paint complete all as specified and directed (Note:- The tint/ shade of the paint shall be as approved by the GE).

M & L for applying Birla/JK/Altek wall care putty not less than 2 mm thick on wall of wherever required complete all as specified and directed.

M & L for preparation of wall plaster or un plaster old surfaces and applying one coat of cement base paint on walls.

M & L for 75mm thick PCC 1:2:4, type B-1(using 20 mmsize stone aggregate) as in pavings/hard standing/path etc. with alternat panel with and including necessary form work finished even & smooth without using extra cement complete all as specified & directed.

M&L for providing 75 mm thick PCC type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection complete all as specified and directed.

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade A complete all as specified and as directed.

M & L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in drain bed complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl forms , moulds ,mitred stopped ends etc. complete all as specified and directed.

Add or deduct for each 25mm girth or part thereof over or under 30 cm inner girth complete all as specified and directed.

M & L for PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in surface channels and drain complete all as specified and directed.

S & F machine pressed rubber moulded precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, laid dry complete all as specified and directed.

M & L for providing precast cement concrete bonders (for stone walling) type B1, 1:2:4(using 20 mm graded stone aggregate) set in Cement mortar 1:6 complete all as specified and directed.

M & L for walling of random rubble, uncoursed well bounded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed.

M & L for walling (Except stone) of random rubble, uncoursed well bonded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed.

Hand packing (any thickness) at back of walls with broken stone or boulders and raising (or lowering) to the required level complete all as specified and directed.

M&L for raised pointing to randam polygonal rubble, uncoursed or brought upto courses in Cement mortar (1:4) complete all as specified and directed.

M & L for Vitrified ceramic coloured tiles (light shade) 10 mm thick (Square/rectangular) area of each tile not less than 0.36 Sqm as in floors, set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified & directed

M & L for Vitrified ceramic coloured tiles (light shade) 10 mm thick (Square/rectangular) area of each tile not less than 0.36 Sqm as in vertical surfaces, set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 10mm thick rendering in CM 1 : 4 complete all as specified & directed

E/M work - Taking down carefully Copper/Aluminium point wiring (Light fan socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc), removing materials from site and making good disturbed surface of walls, floors etc, complete all as specified and directed.

M&L for point wiring surface type with 1.5 Sqmm, single core (FRLS), PVC insulated with multistranded unsheathed copper conductor cable including rigid non- metallic PVC concealed conduit 20 mm or higher dia, light grade ISI marked complete with all PVC conduit accessories / fittings and sunk switch boxes with 3 mm thick plastic laminated hard glossy surface sheet (white) top cover, including continuous earth wire of PVC insulated, unsheathed, green in colour 1.5 Sqmm multistrand copper conductor (FRLS) connected to all fittings, sunken boxes and common earth and connected to earth dolly, screwed with Brass screws, cup washers complete all as specified and directed for the following :- ' (a) One light point/ exhaust fan point/bell point controlled by one, one way switch of 5/6 Amps.

(b) One 3 pin 5/6 amps socket out-let point on independent board controlled by one, one way switch of 5/6 amps on independent board.

(c) One 3 pin 5/6 amps modular switch socket out-let point on same board with other switches

Description all as per item No .136 here in before but for 15 Amps socket outlet with 2.5 Sqmm copper including 2.5 sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.

M&L Point wiring complete with ISI marked 1.5 Sqmm single core PVC insulated unsheathed cable 1100 Volts grade with multistranded copper conductor drawn through in and including medium grade PVC conduit and accessories concealed in wall by cutting the wall and necessary civil works for making good the disturbed surface including terminal boxes for fixing modular switches, sockets etc including suitable size modular plates concealed in walls and 1.5 Sqmm copper conductor as earth continuity to connect common earth dolly complete for the following all as specified and directed:- (NOTE:- The quoted rate shall deemed to include for modular cover plates with frame of any colour and metal flush boxes of any type and size) :-(a) One light point or Fan point controlled by one 5 amps one way modular switch

(b) One 3 pin socket out let 5 Amps modular switch socket controlled by one way switch Independent board.

Description all as per item No 82 here in before but for 15 amps socket outlet with 2.5 Sqmm Copper including 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.

M&L for flameprof of point wiring 1.5 Sqmm PVC unsheathed fire resistance cable of copper conductor multistandard ISI marked single core FRLS 1100 V grade in and including suitable size of stove enameled ERW steel conduit ISI marked conduit along with Flame proof accessories such as junction boxes, Inspection cover, Flameproof glands, concealed/surface type stone/brick masonry walls, roofs, floors etc and providing grouting of nuts bolts for fixing of flame proof switches sockets etc. including provision of 1.5mm FRLS PVC copper conductor earth continuty and connecting to common earth dolly complete. (a) One light point controlled by one flame proof one way switch complete.

S & F in replacement Modular switch one way 6 Amps single pole Make : Anchor/Havells/Legrand/Indo Asian.

S & F in Replacement Modular switch one way 16 Amps single pole Make : Anchor/Havells/Legrand/Indo Asian

S & F in Replacement Modular socket,6 Amps - 2/3 pin combined 2 Module.Make : Anchor/Havells/Legrand/Indo Asian

S & F in Replacement Modular socket, 6/16 Amps - 2/3 pin combined 2 Module.Make : Anchor/Havells/Legrand/Indo Asian.

S & F Modular socket, 6/16 Amps - 2/3 pin combined 2 Module.Make : Anchor/Havells/Legrand/Indo Asian.

S & F Modular socket,6 Amps - 2/3 pin combined 2 Module.Make : Anchor/Havells/Legrand/Indo Asian

S & F Modular switch one way 16 Amps single pole, one module Make : Anchor/Havells/Legrand/Indo Asian

S & F Modular switch one way 6 Amps single pole. One module Make : Anchor/Havells/Legrand/Indo Asian.

S&F ceiling rose, surface bakelite, AC, 220/240 volts, 3 terminals, complete all as specified and directed.

S&F Modular fan regulator 12 watts 2 module complete all as specified .Make : Anchor/Havells/Legrand/Indo Asian

S&F MCB DB sheet metal enclosure for DB, SPN, 8 way having protection with 200 amps rated bus bar, 240 volts, double door type, suitable for housing MCB's and isolators,concealed in wall complete all as specified and directed.MakeLegrand /Scnider /Indo Asian/HPL/L&T/Standard

S&F in replacement MCB DB sheet metal enclosure 230 volt facility to fix MCB in incomer and MCB's outgoing, SPN vertical type 8 ways, Double door type complete fitted with bus bars neuteral links, S&F MCB Isolator SPN 40 Amp capacity 50 Hz blanking plates making good the distubed surfaces so as to match with the existing surfaces complete Make- Legrand/Scnider/Indo Asian/HPL/L&T/Standard

S&F in replacement MCB single pole, 240 volts, 6-32 Amps of 10 KA complete all as specified and directed.

S&F MCB single pole, 240 volts, 6-32 Amps of 10 KA complete all as specified and directed.

S&F in replacement MCB single pole & Neutral 240 volts, 6-32 amps, of 10 KA complete all as specified and directed.

S&F 3 Watt Sleek Plus Downlight (Round) Tesess Mounted round LED Downlight, aesthetically designed aluminum dir-cast Enclosures, with separate replaceable constant current driver complete all as specified and directed Make: Orkus

S&F in Replacement Recess mounting LED 2x2 luminaire 34w, slim ceiling light with extruded aluminium housing and milky diffuser complete and including taking down old fitting all as specified and directed. Make: Havells/Philips/Bajaj/C.G

S&F Sub main wiring with two single run of 4 Sqmm (Normal cross sectional area) of single core unsheathed PVC insulated cable, 1100 volts grade multi stranded copper conductor drawn through with and including conduit of 25 mm dia or higher dia with and including necessary conduit accessories, surface type including 4 Sqmm stranded copper conductor PVC insulated cable as earth wire connected to common earth dolly, complete all as specified and directed.

S&F Sub main wiring with two single run of 6 Sqmm (Normal cross sectional area) of single core unsheathed PVC insulated cable, 1100 volts grade multi stranded copper conductor drawn through with and including conduit of 25 mm dia or higher dia with and including necessary conduit accessories, surface type including 6 Sqmm stranded copper conductor PVC insulated cable as earth wire connected to common earth dolly, complete all as specified and directed.

S&F Flame proof weatherproof Exhaust fan body made out of Aluminium alloy, LM6, epoxy painted single phase ,600mm' of size including providing grouting of nots bolts for fixing necessary arrangement & including three core flexible PVC insulated multi stranded copper condutor of size 1.0 sqmm from ceiling rose/ conector CMRI approved and connecting up completely all as per IS- 2148 complete.

M & L for earthing complete with galvanized steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.50 m deep below normal ground level, connected to galvanized earth lead wire 4.0mm dia by means of bolts, nuts and washers of galvanised iron or steel all as shown in earth plate No 3 of MES schedule 1991 part – I connected to earthing test point including earth continuity conductor and loop earthing etc. as required 4 mm dia galvanized iron or steel wire including necessary excavation and earth work, concrete pit & chamber in PCC 1:2:4 type B1 & pit cover 50mm thck in RCC 1:2:4 type B1 dully reinforced with 6mm dia bar @ 150 c/c both ways including with lifting handle and Earth lead and GI protection pipe light grade 15 mm dia beyond 7.5 mtr from electrode to earth terminal point /main switch board and 20mm bore GI watering pipe light grade etc. complete all as specified and directed.

M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or buried in ground or fixed to poles or any other indicated situated for loop earthing etc. as required GI earth wire of size 4 mm complete all as directed by Engr-in-Charge.

Taking down carefully the old unserviceable flood light and supply and fixing in repiars of Energy saving enviormental friedly ,long life exclusive innovative die-cast aluminium IP65 flood light with high power 150W LEDs as light source ,sutable for high lighting architectural facade highmust and genaral purpose 150W all as directed by EIC. Make-Havell's/wipro/GE/Phillips/Bajaj

M&L for LED Highbay Fitting 80 Watt, wide beam optic, 6500K, IP-65, High pressure dia housing tempered glass cover including control drive complete necessary electrical connections alongwith iron chain suitable for bearing the load of fitting upto 1 mtr for extension upto ceiling of any height. Make - Philips/Bajaj/Havells/Bajaj/GE

S&F Sheet Metal enclousure Plug and socket type DB (Functional Unit) 32 Amps capacity with provision of triple pole and neutral 32 Amps MCB, including plug top and earth plug, grouted flush to walls complete all as specified. Make- Legrand / Schneider/C&S/INDO COPP)

S&F flame proof fluorescent tube light fitting, body made out of Aluminium alloy,epoxy painted with wire guard reflector, flame proof clear glass tubing to house fluorescent tubes along with 1 No of copper wound ballast, starters starter holders, condenser etc complete suitable for 1x36 watts fluorscent tube fixed to roof with fixing arrangement complete or suspended on ceiling with 2 Nos of 19mm dia ERW conduit of suitable length including necessary fixing arrangement CMRI approved and connecting up completely all as per IS-2148 complete.

S&F Flame proof rotary switch of cast iron body SP 16 Amps for ON/OFF light points to operate on single phase,230 V AC CMRI certified IS- 2149 complete.

Supply, laying, testing and commissioning in replacement XLPE insulated, armoured heavy duty electric under ground cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 4 core complete including taking down old defective LT UG cable all as specified and as directed by Engr-In-Charge

Supply, laying and testing LT XLPE insuated PVC bedded galvanised steelstrip or wire armoured earthed electric power cable size 95 sq mm 3½ core with aluminium conductor 1100 volts grade, heavy duty in trenches/along pole or wall of following sizes complete all as specified and directed.

Supplying and laying dry sand for cable protection as in trenches complete all as specified and directed

Supplying and laying comman burnt bricks sub class 'B' brick in trenches for cable protection as in trenches complete all as specified and directed

S&F 40mm bore light grade galvanised steel tubing with and including all fittings for protection of cable in trenches/pole etc. complete all as specified and directed.

SK Traders Sons