VEHICLE HIRING

Drilling of Bore well by down the hole hammer drilling to a finished dia of 165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS-2800 Part I & II 1979 and amended from time to time. Drilling of Bore well 165 mm dia. above 250.00 m to 350.00 m depth Table-38, Sl.No-1, Pg. No: 116 2025-26

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS: 4985/2000 (3rdrevision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. Sor 2025-26, PH items, Table 20, Pg. No:82

Slotting charges for 175 mm dia. PVC casing pipe per RM as per (Quotation)

Supply and delivery of Stay clamp with bolts and Nuts etc., complete.2025-26 MAT-04240 ELEC-8.1.18,Sl.No-669

Supply & Fixing of 180 mm dia PVC Bore Cap per 1No. Sor 2025-26. Sl.No-9 pg:no:118

Supply, delivery & Fixing of GI Coupling 63mm dia as per (Quotation)

Supply, delivery & Fixing of Gl Long Bend C Class 63mm dia as per (Quotation)

Supply, delivery & Fixing of GI Short Bend C Class 63mm dia as per (Quotation)

Supply and Transportation of 3.00HP 15Stage, 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding, Pump shall be suitable for various delivery head and 9 discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply, etc complete for 4" Bore well. Makes: As per list of recommended brands as category I. (ELEC-5 4 3)MAT 03649

Fabrication transportation and and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated, painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side louvres with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T/Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Makes: As per list of recommended brands. Voltmeter; 0-500 V 96x96mm size. 0 to 20 Amps/0 50 Amps Ammeter (96x96mm size)-1No. Single phase preventor of suitable range - 1No.32 A ТР, 10КА МСВ. -1 Nolndication lamps (R-Y-B) with switch control - Iset Voltmeter & Ammeter selector switch - 2 NosSupply and fixing of ISI Mark suitable capacitor, Sor 2025-26,ELEC-ELEC-5.4.17-a, MAT-03712

Supply of 3 Core 2.5 Sqmm Flat Copper cable of ISI for Submersible Motors confirming 11 to IS:694:1990. Makes: Finolex / RR Kabel/Polycab / Havells / KEI/Gloster/ Goldmedal GM/Finecab/Million Sor 2025-26, ELEC-1.6.3,MAT-02795

Manufacture, Supply, & Delivery of 63 mm 10kg/Sqcm HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes 12 (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) Sor 2025-26, PH Items, Table-16, MAT 07312, Pg. No:70

Supply and Delivery of 1000 ml - Solvent Cement including cost and Conveyance. Sor 2024-25, BMW G.149

Provision for Specials For Pipe Line Fitting (As per Quotation) 50mm Dia GI Coupling

50mm Dia GI Long Bend

50mm X 9" Dia GI Nipple

50mm Dia GI Flange

50mm X 5" Dia GI Nipple

Reducers 50X200mm

HDPE pipe ends long neck

MS Flanges 200mm