Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.6 LAccepted-AOC SAIDAKADAL SRINAGAR KASHMIR | SRINAGAR | JAMMU AND KASHMIR | 190001 | L1 | Accepted-AOC L1 | |
| 2 | L2₹7.6 L+₹88,960 (13.3%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹12.8 L+₹6.1 L (90.3%)Rejected-Finance | L3 | Rejected-Finance L3 |
Tender Value
Refer Docs
EMD Value
₹20,000
Closing Date
18 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Khumbathang
GE Khumbathang pin-194105
REPAIR MAINT AND CLEANING OF SEWAGE OF SOAKAGE WELLS AND SEPTIC TANKS INCL CLEANING REPAIR REPLACEMENT OF SEWAGE LINES IN ZONE B AT VARIOUS LOCATIONS UNDER GE KHUMBATHANG
2024_MES_643226_1
8001/GE/KHU-69
Open Tender
Support/Maintenance Service
Item Rate
270 days
GE Khumbathang
As per NIT
8 documents required · 8 mandatory
₹500
GE Khumbathang
₹20,000
Yes
9 May 2024
20 Feb 2024
20 Mar 2024
20 Feb 2024
18 Mar 2024
5 Mar 2024
Amount
M&L Desludging including dewatering of septic tank/soak well in dia/ depth and manholes above 2 mtr in depth for liquid and slurry material and and removing the sludge from the tank by machanical means using hydraulic operated high pressure suction cum jetting sewer cleaning machine including skilled driver and operator and supervising Engineer including provision of water for jetting and removal of sludge/silt/liquid/mud and sand (in foul position) etc out side the MoD land/premises at any distance all as directed by Engr-in-Charge including loading, unloading digging out pit of any size in any type of soil, surring sludge/silt/spoil/mud tec into the pit and spreying bleaching powder over the entire surface complete. Note:- (a) The service provider/contractor during the mechanized operation shall be equiped with gas monitor, nylon rope ladder, torch light and compressor blower etc along with the sewage cleaning truck mounted suction/jetting machine. (b) The cleaning shall be carried out with machanised operation by means of jetting machines and the sludge sucked out with succer machine of required capacity and sent to storage tanks for further disposal to the authorised disposal site. (c) Manual cleaning operation/scavenging is prohibited. (d) The unit rate shall deem to include for all material, labour (skilled/unskilled) tools and plants and requisite quantity of water for the entire operation and transpotation arrangements. (e) The measurement shall be included with depth of water and sludge/silt/mud.
M&L for Cleaning of blocked/filled WC, GT, NT any type and cleaning of freezed water if any and accumalated sludge by heating method with blow lamps or any other method and rodding the cast iron pipe 100 mm /150 mm bore (SWG/PVC/CI) pipe Upto first manhole without damaging the WC and Pipe complete all as specified and directed by Engineer in charge.
Demolition of brick or stone boulder masonry built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings dressed stone works and precast cement articles, including rubbish off the premises complete all as specified and directed by Engineer in charge.
M&L pre cast PCC (1:3:6) type C-1 (20mm graded crushed stone aggregate ) solid block masonry exc 10cm in width or girth and setting cement mortar(1:6) complete all as specified and directed by Engineer in charge.
Demolition of cement concrete in any position not otherwise specifically provided,complete all as specified and directed by Engineer in charge
M&L for cement concrete 1:2:4, type B-1 using 20mm graded crushed stone aggregate as seismic, plinth and similar bands, coping, kerbs cills, steps, parapets, apex stones, bed plates, kerbs, railings up to 60cm height, water troughs, benching and the like rounded or chamfered on edges including necessary form work ,complete all as specified and directed by Engineer in charge.
Taking down plastering on lathing (other than wire-netting), without removing lathing, in cement mortar (one side only measured in cases where both sides are plastered) complete all as specified and directed by Engineer in charge.
M&L for rendering 15mm thick in cement mortar 1:4 on stone masonry surface and finishing the surface even and smooth without using extra cement,complete all as specified and directed by Engineer in charge.
Supply and fixing of PVC (SWR) pipes of size 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed by Engineer in charge.
Supply and fixing of PVC (SWR) pipes of size 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed by Engineer in charge.
Supply and fixing of Vitreous China Urinal, Half stall type, white (Including flush pipe 32 mm) complete all as specified and directed by Engineer in charge.
Supply and fixing of Vitreous china Vitreous China wash down water closet pan (pedestal pattern) EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete all as specified and directed by Engineer in charge.
Supply and fixing in repair vitreous china squatting pan "ORISSA" pattern size 580 x 440mm white with integral foot rests complete including provn of lime concret beding and making good for floor complete all as specified and directed by Engineer in charge.
M&L for dismantling of floor hearth or wall tiles including cement mortar bedding (but not backing) removing serviceable to store and rubbish off the premisess complete all as specified and directed by Engineer in charge.
M & L Glazed ceramic tiles coloured (350x250x7mm/ 450x350x7mm) for works on vertical surfaces such as skirting/dados of economy class B-III conforming to IS-13712 etc set and jointed in neat cement slurry and pointed in coloured cement to match including rendering 10 mm thick in cement mortar 1:3, as in backing layer without using extra cement complete all as specified and directed by Engineer in charge.
M&L for non skid ceramic tiles 7 to 8 mm thick area of each tiles exc 0.06 sqm but n.exc 0.11 sqm (coloured tiles) in floor,over and including 15mm thick screed bed or bedding layer of cement mortar in cement mortar (1:6) set & jointed in neat cement slurry & painted in white or coloured cement to match complete all as specified and directed by Engineer in charge.
Demolition of reinforced cement concrete in any position not otherwise specifically provided, complete all as specified and directed by Engineer in charge.
M&L for Steel reinforcement 10mm dia and over, TMT bars, cut to length, bent to shape required including, cranking, bending, spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and directed by Engineer in charge.
M&L for precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slabs for manholes, each pit and similar items including necessary formwork and set in cement mortar 1:4 (Reinforcement shall be measured and paid for separately), complete all as specified and directed by Engineer in charge.
M&L for reinforced cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in cover slabs for septic tank, and similar items set in cement mortar 1:4 (Reinforcement shall be measured and paid for separately), complete all as specified and directed by Engineer in charge.
M&L for use and waste of formwork to flat faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, rough finished surface complete all as specified and directed by Engineer in charge.
M&L for form work to sides and soffits of suspended slabs such as roof slabs, landings and similar work n.exc 200mm thick (horizantal or slopping) for flat fair finished surfaces, complete all as specified and directed by Engineer in charge.
Supply and fixing in repairs 75mm dia PVC (SWR) bends any radius complete all as specified and directed by Engineer in charge.
Supply and fixing in repairs 110mm dia PVC (SWR) bends any radius complete all as specified and directed by Engineer in charge.
Supply and fixing in repair 75mm dia of outlet PVC (SWR) floor trap plain with grating including joining with solvent cement complete all as specified and directed by Engineer in charge.
Supply and fixing in repair Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed by Engineer in charge.
Deduct Credit for Demolished/Dismantled material Rs (-) 1990.00 (Minus) as listed in Schedule 'A' Part-II (Credit Schedule) Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the 'Contract Sum'.
M/S WELDED IRON FABRICATROS
M/s Raj Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .